Corn germ with pericarp in relation to whole corn: nutrient contents, food and protein efficiency, and protein digestibility-corrected amino acid score

The germ fraction with pericarp (bran) is generated in the industrial processing of corn kernel, and it is used for oil extraction and animal feed. This study evaluated the nutritional and protein quality of this fraction in relation to whole corn. The proximate composition, mineral contents, and amino acid profile of the germ fraction with pericarp and of whole corn were determined. A 4-week experiment was conducted using 36 weanling male Wistar rats, and three 10%-protein diets (reference, germ with 15% lipids and casein with 15% lipids), two 6%-protein diets (whole corn and casein), and a protein-free diet were prepared. The germ showed higher contents of proteins, lipids, dietary fiber (27.8 g.100 g-1), ash, minerals (Fe and Zn- approximately 5 mg.100 g-1), and lysine (57.2 mg.g-1 protein) than those of corn. The germ presented good quality protein (Relative Protein Efficiency Ratio-RPER = 80%; Protein Digestibility-Corrected Amino Acid Score-PDCAAS = 86%), higher than that of corn (RPER = 49%; PDCAAS = 60%). The corn germ fraction with pericarp is rich in dietary fiber, and it is a source of good quality protein as well as of iron and zinc, and its use as nutritive raw material is indicated in food products for human consumption.

Heat Demand Forecasting Models’ Development: Use of Data Mining Tools in SQL Server Analysis Services

This thesis introduces heat demand forecasting models which are generated by using data mining algorithms. The forecast spans one full day and this forecast can be used in regulating heat consumption of buildings. For training the data mining models, two years of heat consumption data from a case building and weather measurement data from Finnish Meteorological Institute are used. The thesis utilizes Microsoft SQL Server Analysis Services data mining tools in generating the data mining models and CRISP-DM process framework to implement the research. Results show that the built models can predict heat demand at best with mean average percentage errors of 3.8% for 24-h profile and 5.9% for full day. A deployment model for integrating the generated data mining models into an existing building energy management system is also discussed.

Potential of energy and nutrient recovery from biodegradable waste by co-treatment in Lithuania

Biodegradable waste quantities in Lithuania and their potential for the co-treatment in renewable energy and organic fertilizer production are investigated. Two scenarios are formulated to study the differences of the amounts of obtainable energy and fertilizers between different ways of utilization. In the first scenario, only digestion is used, and in the second scenario, other materials than straw are digested, and straw and the solid fraction of sewage sludge digestate are combusted. As a result, the amounts of heat and electricity, as well as the fertilizer amounts in the counties are obtained for both scenarios. Based on this study, the share of renewable energy in Lithuania could be doubled by the co-treatment of different biodegradable materials.

Modelling the exothermic heat and the demand of cooling in paper and pulp industry biological wastewater treatment

This master thesis presents a study on the requisite cooling of an activated sludge process in paper and pulp industry. The energy consumption of paper and pulp industry and it’s wastewater treatment plant in particular is relatively high. It is therefore useful to understand the wastewater treatment process of such industries. The activated sludge process is a biological mechanism which degrades carbonaceous compounds that are present in waste. The modified activated sludge model constructed here aims to imitate the bio-kinetics of an activated sludge process. However, due to the complicated non-linear behavior of the biological process, modelling this system is laborious and intriguing. We attempt to find a system solution first using steady-state modelling of Activated Sludge Model number 1 (ASM1), approached by Euler’s method and an ordinary differential equation solver. Furthermore, an enthalpy study of paper and pulp industry’s vital pollutants was carried out and applied to revise the temperature shift over a period of time to formulate the operation of cooling water. This finding will lead to a forecast of the plant process execution in a cost-effective manner and management of effluent efficiency. The final stage of the thesis was achieved by optimizing the steady state of ASM1.

Offshoring and outsourcing under demand uncertainty -a supply chain management analysis

Outsourcing and offshoring or any combinations of these have not just become a popular phenomenon, but are viewed as one of the most important management strategies due to the new possibilities from globalization. They have been seen as a possibility to save costs and improve customer service. Executing offshoring and offshore outsourcing successfully can be more complex than initially expected. Potential cost savings resulting from of offshoring and offshore outsourcing are often based on lower manufacturing costs. However, these benefits might be conflicted by a more complex supply chain with service level challenges that can respectively increase costs. Therefore analyzing the total cost effects of offshoring and outsourcing is necessary. The aim of this Master´s Thesis was to to construct a total cost model using academic literature to calculate the total costs and analyze the reasonability of offshoring and offshore outsourcing production of a case company compared to insourcing production. The research data was mainly quantitative and collected mainly from the case company past sales and production records. In addition management level interviews from the case company were conducted. The information from these interviews was used for the qualification of the necessary quantitative data and adding supportive information that could not be gathered from the quantitative data. Both data collection and analysis were guided by a theoretical frame of reference that was based on academic literature concerning offshoring and outsourcing, statistical calculation of demand and total costs. The results confirm the theories that offshoring and offshore outsourcing would reduce total costs as both offshoring and offshore outsourcing options result in lower total annual costs than insourcing mainly due to lower manufacturing costs. However, increased demand uncertainty would make the alternative of offshore outsourcing more risky and difficult to manage. Therefore when assessing the overall impact of the alternatives, offshoring is the most preferable option. As the main cost savings in offshore outsourcing came from lower manufacturing costs, more specifically labour costs, the logistics costs in this case company did not have an essential effect in total costs. The management should therefore pay attention initially to manufacturing costs and then logistics costs when choosing the best production sourcing option for the company.

Mr Judge qui a demandé la libération de Mr [Mac Swiney, lord-maire de] Cork : [photographie de presse] / [Agence Rol]

Référence bibliographique : Rol, 60750

Role of family eating practices on daily nutrient intakes, dietary patterns and measures of body composition in peri-adolescents

Although family eating practices (FEPs) playa role in the formation of eating practices in children, there is a lack of evidence regarding the role of FEPs on obesity (DB) risk. The purpose of this thesis was to assess the role of child, mother 'and father eating practices (CEPs; MEPS; FaEPs) on nutrient intakes, dietary patterns and body composition. Data were collected on approximately 2,400 peri-adolescents (s250 with complete covariate data). Dietary patterns were assessed using scores that reflected how closely participants followed DASH and Health Canada (HC) recommendations. In girls, poor CEPs, MEPs and FaEPs were associated with increased BMI and risk of overweight and poor dietary patterns according to DASH, and DASH and HC, respectively. In boys, poor CEPs and FaEPs were associated with increased monounsaturated and trans fat, and Vitamin C intakes, respectively. These findings suggest FEPs are associated with DB risk, particularly in girls.

(A) Photoregulation of DNA Functions by Cyclic Azobenzene-tethered Oligonucleotides (B) Site-specific Fluorescent Labeling of DNA using Inverse Electron Demand Diels-Alder Reaction between trans-Cyclooctene Derivatives and BODIPY-Tetrazine Adducts

(A) Most azobenzene-based photoswitches require UV light for photoisomerization, which limit their applications in biological systems due to possible photodamage. Cyclic azobenzene derivatives, on the other hand, can undergo cis-trans isomerization when exposed to visible light. A shortened synthetic scheme was developed for the preparation of a building block containing cyclic azobenzene and D-threoninol (cAB-Thr). trans-Cyclic azobenzene was found to thermally isomerize back to the cis-form in a temperature-dependent manner. cAB-Thr was transformed into the corresponding phosphoramidite and subsequently incorporated into oligonucleotides by solid phase synthesis. Melting temperature measurement suggested that incorporation of cis-cAB into oligonucleotides destabilizes DNA duplexes, these findings corroborate with circular dichroism measurement. Finally, Fluorescent Energy Resonance Transfer experiments indicated that trans-cAB can be accommodated in DNA duplexes. (B) Inverse Electron Demand Diels-Alder reactions (IEDDA) between trans-olefins and tetrazines provide a powerful alternative to existing ligation chemistries due to its fast reaction rate, bioorthogonality and mutual orthogonality with other click reactions. In this project, an attempt was pursued to synthesize trans-cyclooctene building blocks for oligonucleotide labeling by reacting with BODIPY-tetrazine. Rel-(1R-4E-pR)-cyclooct-4-enol and rel-(1R,8S,9S,4E)-Bicyclo[6.1.0]non-4-ene-9-ylmethanol were synthesized and then transformed into the corresponding propargyl ether. Subsequent Sonogashira reactions between these propargylated compounds with DMT-protected 5-iododeoxyuridine failed to give the desired products. Finally a methodology was pursued for the synthesis of BODIPY-tetrazine conjugates that will be used in future IEDDA reactions with trans-cyclooctene modified oligonucleotides.

Méthode pour l'exercise de l'Heure Sainte demandé par N.S. a la Bienheureuse Marguerite-Marie.

UANL