Binding of amitriptyline to alpha 1-acid glycoprotein and its variants.

Binding studies have been performed between amitriptyline and i) native alpha 1-acid glycoprotein (AAG); ii) its desialylated form; iii) its two variants, S-AAG and F-AAG; and iv) a mixture of S-AAG and F-AAG. Scatchard analysis revealed the presence of two classes of binding sites on AAG. For native AAG, the first class (of high affinity) has an association constant (Ka1) of 1.5 x 10(6) L mol-1 and a number of binding sites per mole of protein (n1) of 0.25, while the second class (of low affinity) has a Ka2 of 3.2 x 10(4) L mol-1 and a n2 of 0.94. Similar data were found for desialylated AAG. S-AAG and F-AAG do not differ in their association constants measured with amitriptyline, but in their number of binding sites per mole of protein (n): S-AAG: n1 = 0.56, n2 = 0.52; F-AAG: n1 = 0.17, n2 = 0.71. These results confirm those of a previous study, in which a higher affinity of S-AAG towards various basic drugs in comparison with F-AAG has been found.

Clave para identificación de crustáceos decápodos y estomatópodos del Perú

En el Perú se han registrado 15 especies de estomatópodos “camarones brujo”, en esta clave sólo se han incluido 12 especies. En cuanto a los decápodos (langostinos, camarones, maruchas, muy-muyes, langostas, ermitaños, centollas y cangrejos) se incluyen 267 especies de las 403 registradas para Perú, correspondiéndole 15 especies a langostas, 73 especies a los anomuros y 179 especies a los braquiuros.

Effect of substrate temperature on deposition rate of rf plasma-deposited hydrogenated amorphous silicon thin films

We present a study about the influence of substrate temperature on deposition rate of hydrogenated amorphous silicon thin films prepared by rf glow discharge decomposition of pure silane gas in a capacitively coupled plasma reactor. Two different behaviors are observed depending on deposition pressure conditions. At high pressure (30 Pa) the influence of substrate temperature on deposition rate is mainly through a modification of gas density, in such a way that the substrate temperature of deposition rate is similar to pressure dependence at constant temperature. On the contrary, at low pressure (3 Pa), a gas density effect cannot account for the observed increase of deposition rate as substrate temperature rises above 450 K with an activation energy of 1.1 kcal/mole. In accordance with laser‐induced fluorescence measurements reported in the literature, this rise has been ascribed to an increase of secondary electron emission from the growing film surface as a result of molecular hydrogen desorption.

Seleção de genótipos parentais de acerola com base na divergência genética multivariada

Este trabalho teve por objetivo identificar e selecionar genótipos parentais de acerola (Malpighia emarginata L.) adequadas a programas de melhoramento genético. Nove caracteres quantitativos de maior importância agronômica foram usados para determinação da distância genética e formação de grupos similares de acessos. O agrupamento pelo método de Tocher, a partir das distâncias generalizadas de Mahalanobis, possibilitou a divisão de 14 genótipos em três grupos. Com base na divergência genética e no caráter agronômico-chave (teor de vitamina C), destacaram-se como mais promissores os cruzamentos dos genótipos: AM Mole pertencente ao grupo III, com os genótipos PR AM, N° 18, PR 17, PR 16, Eclipse, AM 22 e Dominga, todos pertencentes ao grupo I.

Oxidative stress in aging: advances in proteomic approaches

Aging is a gradual, complex process in which cells, tissues, organs, and the whole organism itself deteriorate in a progressive and irreversible manner that, in the majority of cases, implies pathological conditions that affect the individual"s Quality of Life (QOL). Although extensive research efforts in recent years have been made, the anticipation of aging and prophylactic or treatment strategies continue to experience major limitations. In this review, the focus is essentially on the compilation of the advances generated by cellular expression profile analysis through proteomics studies (two-dimensional [2D] electrophoresis and mass spectrometry [MS]), which are currently used as an integral approach to study the aging process. Additionally, the relevance of the oxidative stress factors is discussed. Emphasis is placed on postmitotic tissues, such as neuronal, muscular, and red blood cells, which appear to be those most frequently studied with respect to aging. Additionally, models for the study of aging are discussed in a number of organisms, such as Caenorhabditis elegans, senescence-accelerated probe-8 mice (SAMP8), naked mole-rat (Heterocephalus glaber), and the beagle canine. Proteomic studies in specific tissues and organisms have revealed the extensive involvement of reactive oxygen species (ROS) and oxidative stress in aging.

Caracterização tecnológica de jabuticabas 'Sabará' provenientes de diferentes regiões de cultivo

Características fisico-químicas de jabuticabas 'sabará', provenientes de 10 diferentes regiões de cultivo localizadas no Estado de São Paulo, foram analisadas de agosto a setembro de 2001 para determinação de sua qualidade. De cada local de cultivo foram colhidos 3 kg de frutos. Diferenças significativas foram observadas em todas as características avaliadas. A média de peso por fruto variou de 3,56 a 7,40g, e os frutos oriundos de pomar situado na cidade de Casa Branca - SP foram os que apresentaram os maiores pesos. As médias do índice de formato e do fruto e do diâmetro oscilaram de 0,962 a 0,990 e de 2,45 a 1,73 cm, respectivamente. A coloração dos frutos foi mais roxa-escura do que roxa. A firmeza dos frutos variou de firme a mole, e os frutos colhidos em pomares situados nas regiões de Casa Branca - SP, Pedregulho - SP e Miguelópolis -SP apresentaram-se mais firmes, sugerindo um maior potencial de conservação pós-colheita. O teor de sólidos solúveis totais variou de 11,6 a 17,9, o pH de 2,91 a 3,70 sendo maiores em jabuticabas colhidas em pomares situados nas cidades de Guaíra-SP e Ituverava-SP. A acidez total titulável, expressa em g de ácido cítrico por 100g, variou de 0,888 a 1,625, os teores de vitamina C variaram de 14,86 a 24,67 mg de ácido ascórbico por 100g, e os de carboidrato solúvel de 0,91 a 11,39g de glicose por 100g, respectivamente. Os resultados levam a concluir que as jabuticabas provenientes de pomares situados na cidade de Casa Branca-SP apresentaram melhor qualidade, sendo adequadas tanto para a indústria como para o consumo de fruta fresca e com maior potencial de conservação pós-colheita.

Ion-exchange resins as stationary phase in reactive chromatography

Dynamic behavior of bothisothermal and non-isothermal single-column chromatographic reactors with an ion-exchange resin as the stationary phase was investigated. The reactor performance was interpreted by using results obtained when studying the effect of the resin properties on the equilibrium and kinetic phenomena occurring simultaneously in the reactor. Mathematical models were derived for each phenomenon and combined to simulate the chromatographic reactor. The phenomena studied includes phase equilibria in multicomponent liquid mixture¿ion-exchange resin systems, chemicalequilibrium in the presence of a resin catalyst, diffusion of liquids in gel-type and macroporous resins, and chemical reaction kinetics. Above all, attention was paid to the swelling behavior of the resins and how it affects the kinetic phenomena. Several poly(styrene-co-divinylbenzene) resins with different cross-link densities and internal porosities were used. Esterification of acetic acid with ethanol to produce ethyl acetate and water was used as a model reaction system. Choosing an ion-exchange resin with a low cross-link density is beneficial inthe case of the present reaction system: the amount of ethyl acetate as well the ethyl acetate to water mole ratio in the effluent stream increase with decreasing cross-link density. The enhanced performance of the reactor is mainly attributed to increasing reaction rate, which in turn originates from the phase equilibrium behavior of the system. Also mass transfer considerations favor the use ofresins with low cross-link density. The diffusion coefficients of liquids in the gel-type ion-exchange resins were found to fall rapidly when the extent of swelling became low. Glass transition of the polymer was not found to significantlyretard the diffusion in sulfonated PS¿DVB ion-exchange resins. It was also shown that non-isothermal operation of a chromatographic reactor could be used to significantly enhance the reactor performance. In the case of the exothermic modelreaction system and a near-adiabatic column, a positive thermal wave (higher temperature than in the initial state) was found to travel together with the reactive front. This further increased the conversion of the reactants. Diffusion-induced volume changes of the ion-exchange resins were studied in a flow-through cell. It was shown that describing the swelling and shrinking kinetics of the particles calls for a mass transfer model that explicitly includes the limited expansibility of the polymer network. A good description of the process was obtained by combining the generalized Maxwell-Stefan approach and an activity model that was derived from the thermodynamics of polymer solutions and gels. The swelling pressure in the resin phase was evaluated by using a non-Gaussian expression forthe polymer chain length distribution. Dimensional changes of the resin particles necessitate the use of non-standard mathematical tools for dynamic simulations. A transformed coordinate system, where the mass of the polymer was used as a spatial variable, was applied when simulating the chromatographic reactor columns as well as the swelling and shrinking kinetics of the resin particles. Shrinking of the particles in a column leads to formation of dead volume on top of the resin bed. In ordinary Eulerian coordinates, this results in a moving discontinuity that in turn causes numerical difficulties in the solution of the PDE system. The motion of the discontinuity was eliminated by spanning two calculation grids in the column that overlapped at the top of the resin bed. The reactive and non-reactive phase equilibrium data were correlated with a model derived from thethermodynamics of polymer solution and gels. The thermodynamic approach used inthis work is best suited at high degrees of swelling because the polymer matrixmay be in the glassy state when the extent of swelling is low.

Fosfitos aplicados em pós-colheita reduzem o mofo-azul em maçãs 'Fuji' e 'Gala'

O mofo-azul (Penicillium expansum) é uma podridão pós-colheita comum em maçãs (Malus domestica). O uso de substâncias menos ofensivas ao ambiente, como o fosfito (ácido fosforoso), é uma das alternativas de controle dessa doença. Visou-se, então, a avaliar neste estudo a eficiência de fosfito-K (40% de P2O5 e 30% de K2O) e fosfito-CaB (10,7% de P2O5, 3,89% de Ca e 0,5% de B) no controle do mofo-azul em maçãs 'Fuji' e 'Gala'. Os testes foram delineados em blocos ao acaso com seis repetições de 20 frutos cada. Os frutos foram desinfestados em hipoclorito de Na (1%) por três minutos, lavados em água esterilizada, feridos (1mm de diâmetro e de profundidade) com agulha em quatro pontos eqüidistantes, imersos nos tratamentos por 15 minutos e armazenados a 15-20ºC. Nas suspensões contaminadas com Penicillium expansum (10² conídios.mL-1), foram adicionadas as seguintes substâncias: benomil (150 mg.L-1), fosfito-K (0,5 a 1,5 mL.L-1) e fosfito-CaB (1,5 a 3,0 mL.L-1). As maçãs 'Fuji' e 'Gala' imersas em água com fosfito-CaB (1,5 mL.L-1), fosfito-K (0,5-1,5 mL.L-1) ou benomil (150 mg.L-1) foram menos afetadas pelo mofo-azul. A aplicação de fosfito-K (1,5 mL.L-1) ou benomil (150 mg.L-1) nos frutos foi mais eficiente do que os demais tratamentos no controle do mofo-azul.

Avaliação da atividade de indutores de resistência abiótica, fungicida químico e extratos vegetais no controle da podridão-negra em Abacaxi 'Pérola'

A podridão-mole ou podridão-negra, causada pelo fungo Chalara paradoxa (De Seyn.) Sacc., é uma doença de pós-colheita que pode ser responsável por perdas elevadas, tanto em frutos para consumo in natura, quanto naqueles destinados à indústria de processamento. O corte do pedúnculo e ferimentos na casca do fruto favorecem a infecção. O objetivo do presente trabalho foi avaliar o efeito de indutores de resistência abiótica, fungicida e extratos vegetais no controle da podridão-negra em abacaxi. Os isolados foram obtidos de frutos coletados no município de Santa Rita, Paraíba, que apresentaram sintomas da doença. Utilizaram-se 32 frutos de cv. 'Pérola', lavados em água corrente e desinfestados com hipoclorito de sódio (produto comercial) a 4,0%, por cinco minutos. Após secagem em temperatura ambiente, os frutos foram pulverizados com os tratamentos: 1) ADE (água destilada esterilizada); 2) Derosal; 3) BION® (Acibenzolar-S-Methyl); 4) Ecolife® (Quinabra); 5) Agro-Mos® (mananoligossacarídeo fosforilado); 6) extrato de alho a 20%; 7) extrato de cebola a 20%, e 8) extrato de nim a 20%. Os frutos tratados permaneceram em câmara úmida por 24 horas, antes da inoculação com um disco de micélio (6mm) do fungo, incubado em BDA a 25±2ºC e fotoperíodo de 12 horas e colocado sobre um ferimento na região da casca. A avaliação do progresso da doença foi realizada seguindo-se escala de notas, onde: 1 - Ausência de sintomas; 2 - Podridãonegra em área da casca equivalente a 1-5 frutilhos; 3 - Podridão-negra em área da casca equivalente a 6-10 frutilhos; 4 - Podridão inicial da polpa com coloração pardo-amarelada; 5 - Podridão e desintegração da polpa atingindo área superior a 50% do fruto. O delineamento experimental foi o inteiramente casualizado, com oito tratamentos e quatro repetições, utilizando os modelos lineares generalizados com distribuição multinomial, sendo as médias comparadas pelo teste de Scott-Knott, a 5% de probabilidade. O tratamento que apresentou melhor resultado foi o indutor de resistência Ecolife®, aumentando o período de vida útil dos frutos e diminuindo a severidade dos sintomas da doença.

Poly(butylene terephthalate-co-5-tert-butyl isophthalate) Copolyesters: Synthesis, Characterization and Properties

A series of poly(butylene terephthalate) copolyesters containing 5-tert-butyl isophthalate units up to 50%-mole, as well as the homopolyester entirely made of these units, were prepared by polycondensation from the melt. The microstructure of the copolymers was determined by NMR to be at random for the whole range of compositions. The effect exerted by the 5-tert-butyl isophthalate units on thermal, tensile and gas transport properties was evaluated. Both Tm and crystallinity as well as the mechanical moduli were found to decrease steadily with copolymerization whereas Tg increased and the polyesters became more brittle. Permeability and solubility sligthly increased also with the content in substituted units whereas the diffusion coefficient remained practically constant. For the homopolyester poly(5-tert-butyl isophthalate), all these properties were found to deviate significantly from the general trend displayed by copolyesters suggesting that a different chain mode of packing in the amorphous phase is likely adopted in this case.

Oxidative stress in aging: advances in proteomic approaches

Aging is a gradual, complex process in which cells, tissues, organs, and the whole organism itself deteriorate in a progressive and irreversible manner that, in the majority of cases, implies pathological conditions that affect the individual"s Quality of Life (QOL). Although extensive research efforts in recent years have been made, the anticipation of aging and prophylactic or treatment strategies continue to experience major limitations. In this review, the focus is essentially on the compilation of the advances generated by cellular expression profile analysis through proteomics studies (two-dimensional [2D] electrophoresis and mass spectrometry [MS]), which are currently used as an integral approach to study the aging process. Additionally, the relevance of the oxidative stress factors is discussed. Emphasis is placed on postmitotic tissues, such as neuronal, muscular, and red blood cells, which appear to be those most frequently studied with respect to aging. Additionally, models for the study of aging are discussed in a number of organisms, such as Caenorhabditis elegans, senescence-accelerated probe-8 mice (SAMP8), naked mole-rat (Heterocephalus glaber), and the beagle canine. Proteomic studies in specific tissues and organisms have revealed the extensive involvement of reactive oxygen species (ROS) and oxidative stress in aging.

Articulação temporomandibular - aspectos normais e deslocamentos de disco: imagem por ressonância magnética

O deslocamento de disco da articulação temporomandibular tem sido definido como uma relação anormal do disco articular com o côndilo mandibular, fossa e eminência articulares. Os deslocamentos de disco podem estar presentes sem interferir com a função articular a curto prazo. A ressonância magnética tem sido o exame de imagem de primeira escolha para o diagnóstico das anormalidades de tecido mole da articulação temporomandibular, uma vez que apresenta alta acurácia na determinação da posição do disco articular. O objetivo deste trabalho é apresentar uma revisão de literatura, demonstrando os aspectos normais e os diferentes tipos de deslocamentos de disco desta articulação e o seu diagnóstico por imagem, destacando o papel do exame por ressonância magnética.

Syndromes lymphoprolifératifs CD19/CD5 positifs: expression différentielle de CD200

Contexte. Le diagnostic différentiel des syndromes lymphoprolifératifs est souvent difficile et nécessite l'intégration de données immunophénotypiques, morphologiques, génétiques et cytogénétiques. La leucémie lymphoïde chronique (LLC) et le lymphome du manteau (LM) sont tous deux des lymphoproliférations CD19 et CD5 positives qu'il est nécessaire de distinguer car le pronostic et le traitement diffèrent. Les analyses génétiques jouent un rôle majeur notamment par la présence de la translocation t(11 ;14) (q13 ;q32) et le réarrangement IgH/CCND1 permettant d'identifier la plupart des lymphomes du manteau. Malgré cela, certains cas atypiques restent difficilement classifiables. CD200 (OX-2), une glycoprotéine transmembranaire jouant un rôle dans l'immunité anti- tumorale pourrait être un marqueur immunophénotypique permettant de distinguer la LLC dans laquelle elle serait surexprimée, du lymphome du manteau dans lequel elle semble déficiente. D'autres syndromes lymphoprolifératifs (SLP) pourraient également bénéficier de ce marqueur. Objectifs. Le but de ce travail est de déterminer si l'analyse de l'expression du CD200 permet de distinguer le lymphome du manteau de la LLC mais également sa corrélation avec d'autres SLP. Méthodes. Analyse de données immunophénotypiques par cytométrie de flux à partir d'une base de données de 68 patients comprenant 44 LLC, 4 lymphomes du manteau, 10 lymphomes folliculaires, 7 lymphomes de la zone marginale, 2 lymphomes lymphoplasmocytaires et une leucémie à tricholeucocytes sur une période allant de novembre 2012 à septembre 2013. L'étude de rapports morphologiques en pathologie, génétique et cytogénétique ainsi qu'une recherche de littérature principalement dans Medline (Pubmed) complète ce travail. Résultats. Ce travail démontre que la coexpression des marqueurs CD19 et CD5 (généralement observée dans la LLC, d'un peu plus faible intensité dans le lymphome du manteau et de très faible intensité dans d'autres lymphomes) n'est pas suffisante pour les distinguer les uns des autres. La coexpression CD200/CD19 forte dans la LLC la distingue du lymphome du manteau avec l'exception de certains cas atypiques de lymphome du manteau. Le ratio CD19/CD200 / CD19/CD5 distingue tous les LLC des lymphomes du manteau mais pas dans tous les cas d'autres SLP, d'autres marqueurs de surface permettant la distinction (CD19/CD10 dans le cas des lymphomes folliculaires et CD19/IgM de surface exprimée avec une forte intensité pour les lymphomes lymphoplasmocytaires). Enfin, la coexpression CD19/CD23 ne permet pas de distinguer tous les cas de LLC de ceux du lymphome du manteau en raison de cas atypiques de LLC. Conclusion. Les observations décrites dans ce travail indiquent que l'addition du marqueur CD200 au panel classique des syndromes lymphoprolifératifs comprenant les marqueurs CD19, CD20, CD23, CD43, CD10, CD5, CD103, CD38 et l'IgM de surface, est utile au diagnostic des lymphomes/leucémies de faible degré de malignité. Toutefois cette analyse doit tenir compte également des divers ratios décrits dans ce travail pour en distinguer avec plus d'efficacité les différents sous-types et permettre d'apporter, avec les résultats de la morphologie, de la cytogénétique, des analyses moléculaires, du séquençage et du profil d'expression génique, les éléments essentiels à une approche diagnostique intégrative. Les résultats sont à considérer avec prudence vu le faible échantillon de patients (n=68).

Ação promotora do berílio em catalisadores da síntese do estireno

The catalytic dehydrogenation of ethylbenzene in presence of steam is the main commercial route to produce styrene. The industrial catalysts are potassium- and chromia-doped hematite which show low surface areas leading to bad performance and short life. In order to develop catalysts with high areas, the effect of beryllium on the textural properties and on the catalytic performance of this iron oxide was studied. The influence of the amount of the dopant, the starting material and the calcination temperature were also studied. In sample preparations, iron and beryllium salts (nitrate or sulfate) were hydrolyzed with ammonia and then calcinated. The experiments followed a factorial design with two variables in two levels (Fe/Be= 3 and 7; calcination temperature= 500 and 700ºC). Solids without any dopant were also prepared. Samples were characterized by elemental analysis, infrared spectroscopy, surface area and porosity measurements, X-ray diffraction, DSC and TG. The catalysts were tested in a microreactor at 524ºC and 1 atm, by using a mole ratio of steam/ ethylbenzene=10. The selectivity was measured by monitoring styrene, benzene and toluene formation. It was found that the effect of beryllium on the characteristics of hematite and on its catalytic performance depends on the starting material and on the amount of dopant. Surface areas increased due to the dopant as well as the nature of the precursor; samples produced by beryllium sulfate showed higher areas. Beryllium-doped solids showed a higher catalytic activity when compared to pure hematite, but no significant influence of the anion of starting material was noted. It can be concluded that beryllium acts as both textural and structural promoter. Samples with Fe/Be= 3, heated at 500ºC, lead to the highest conversion and were the most selective. However, catalysts prepared from beryllium sulfate are the most promising to ethylbenzene dehydrogenation due to their high surface area which could lead to a longer life.

Fischer-Tropsch Slurry Bubble Column Reactor Modeling

The literature part of the work reviews overall Fischer-Tropsch process, Fischer-Tropsch reactors and catalysts. Fundamentals of Fischer-Tropsch modeling are also presented. The emphasis is on the reactor unit. Comparison of the reactors and the catalysts is carried out to choose the suitable reactor setup for the modeling work. The effects of the operation conditions are also investigated. Slurry bubble column reactor model operating with cobalt catalyst is developed by taking into account the mass transfer of the reacting components (CO and H2) and the consumption of the reactants in the liquid phase. The effect of hydrostatic pressure and the change in total mole flow rate in gas phase are taken into account in calculation of the solubilities. The hydrodynamics, reaction kinetics and product composition are determined according to literature. The cooling system and furthermore the required heat transfer area and number of cooling tubes are also determined. The model is implemented in Matlab software. Commercial scale reactor setup is modeled and the behavior of the model is investigated. The possible inaccuraries are evaluated and the suggestions for the future work are presented. The model is also integrated to Aspen Plus process simulation software, which enables the usage of the model in more extensive Fischer-Tropsch process simulations. Commercial scale reactor of diameter of 7 m and height of 30 m was modeled. The capacity of the reactor was calculated to be about 9 800 barrels/day with CO conversion of 75 %. The behavior of the model was realistic and results were in the right range. The highest uncertainty to model was estimated to be caused by the determination of the kinetic rate.