Characterization of antibiosis to the silverleaf whitefly Bemisia tabaci biotype B (Hemiptera: Aleyrodidae) in cowpea entries

The silverleaf whitefly, Bemisia tabaci (Gennadius) biotype B (Hemiptera: Aleyrodidae), is considered one of the most important pests of cowpea (Vigna unguiculata L. Walp.), limiting the productivity of this crop worldwide. Chemical control is still the main strategy for the management of populations of this insect. However, due to the harmful effects of pesticides on the environment and to humans, less injurious alternatives have been investigated. Along this line, the use of resistant genotypes can be a valuable tool for the control of the silverleaf whitefly. In this paper, we investigate some biological aspects of B. tabaci biotype B confined on 14 genotypes of cowpea. We evaluated the incubation period, egg viability, duration of nymphal stages, total duration of the juvenile phase, instar mortality and total mortality of the immature stage. The genotype MNC 99-541 F21 exhibited antibiosis against the whitefly, prolonging the lifecycle of the insect. The genotypes Canapu, BRS-Urubuquara and TE97-304 G-4 also exhibited antibiosis, causing high nymphal mortality. These results may help in breeding programmes to develop cowpea lines with resistance to B. tabaci biotype B.

Aplicação de métodos computacionais no estudo das fases intermetálicas ordenadas pt-sn

Fuel cells are a very promising solution to the problems of power generation and emission of pollutant to the environment, excellent to be used in stationary application and mobile application too. The high cost of production of these devices, mainly due to the use of noble metals as anode, is a major obstacle to massive production and deployment of this technology, however the use of intermetallic phases of platinum combined with other metals less noble has been evaluated as electrodes in order to minimize production costs and still being able to significantly improve the catalytic performance of the anode. The study of intermetallic phases, exclusively done by experimental techniques is not complete and demand that other methods need to be applied to a deeper understanding of the behavior geometric properties and the electronic structure of the material, to this end the use of computer simulation methods, which have proved appropriate for a broader understanding of the geometric and electronic properties of the materials involved, so far not so well understood.. The use of computational methods provides answers to explain the behavior of the materials and allows assessing whether the intermetallic may be a good electrode. In this research project was used the Quantum-ESPRESSO package, based on the DFT theory, which provides the self-consistent field calculations with great precision, calculations of the periodic systems interatomic force, and other post-processing calculations that points to a knowledge of the geometric and electronic properties of materials, which may be related to other properties of them, even the electrocatalytic. The electronic structure is determined from the optimized geometric structure of materials by analyzing the density of states (DOS) projected onto atomic orbital, which determines the influence of the electrocatalytic properties of the material... (Complete abstract click electronic access below)

Um estudo de novos paradigmas na realização de projetos de instalação elétrica residencial (automação)

Through awareness of new trends of consumption of the population with regard to housing, comfort, entertainment, security and sustainability, it was crafted a work that set out to study and develop the concept of home automation and how it will revolutionize the electrical installation projects and energy savings. A pre-wiring project, taking into account, basically, the installed load, is presented as a basis for comparison. The protocols for communication between intelligent devices in an automation environment, used in the work, are the X-10, LonWorks and UPnP. The home network is studied and divided into subsystems, for a better understanding, which are the lighting, audio, video and multimedia system, security, air conditioning and central vacuum system, and the idea of integrated design and system integrator is introduced, showing the change necessity in the design philosophy of electrical installations. The main means of energy savings in an automated home, such as dimerization, master off and smart meters are presented and, finally, it was concluded that there is a need to structure electrical installation projects more comprehensive with regard to home automation, in order to become more efficient and useful to users

Transnacionalização das relações de trabalho: o caso da maquila estadunidense Johnson Controls (plantas FINSA e interiores) e o papel da Federação Internacional de Trabalhadores das Indústrias Metalúrgicas (FITIM)

Pós-graduação em Relações Internacionais (UNESP - UNICAMP - PUC-SP) - FFC

A reference model as automated process for software adaptation at runtime

The development of self-adaptive software (SaS) has specific characteristics compared to traditional one, since it allows that changes to be incorporated at runtime. Automated processes have been used as a feasible solution to conduct the software adaptation at runtime. In parallel, reference model has been used to aggregate knowledge and architectural artifacts, since capture the systems essence of specific domains. However, there is currently no reference model based on reflection for the development of SaS. Thus, the main contribution of this paper is to present a reference model based on reflection for development of SaS that have a need to adapt at runtime. To present the applicability of this model, a case study was conducted and good perspective to efficiently contribute to the area of SaS has been obtained.

Difusão de tecnologia CAD e CNC como ferramenta básica de criação e produção em pequena escala, acessível à comunidade

The high competitiveness and the search for newtechnologies that differentiate the product from the project,require the use of new digital tools. The computer aideddesign - Computed Aided Design (CAD), with electronicmodeling, simulation, structural analysis and production,performed in a virtual environment through the applicationof specific software, are available but their use is stilllimited. There are various software available in languagesand extensions to industrial production which, from 3Dmodeling, they can manage through Computer NumericalControl - Computed Numerical Control (CNC) machiningcenters, laminating, stamping, mold making and otherprocesses productive. This project aims to encouragecreativity and entrepreneurship in the community throughthe provision of technology computer aided design - CAD,with a view to implementation of machining technology.

Physics teachers initial education and professional performance: what do future teachers have to say?

This research deals with the discussion about Physics teachers’ undergraduate education and professional performance related to the knowledge acquired during this initial education. More specifically, we try to answer questions like: How do future teachers evaluate the knowledge acquired during their initial education as in terms of specific knowledge as pedagogical knowledge? What are their formative needs and future expectatives about professional performance and the school teaching environment? Data was constituted from a sample of 26 future high school physics teachers, one semester long, that were taking the supervised curricular training in a undergraduate Physics education program (called Licenciatura in Brazil), in São Paulo State public university. Besides the final report of this training, future teachers were asked to answer a questionnaire aiming to take their conceptions about their initial education program, their formative needs, future professional expectatives and high school teaching environment. According to the future teachers, the program they were about to finish was satisfactory in terms of Physics specific contents; however, about the pedagogical content knowledge and the pedagogical practice, they showed to be unsatisfied and insecure. The majority of the questionnaire responses demonstrated that they feel lack of teaching experience. Moreover, teachers emphasize other factors related to the future professional performance: possible difficulties to deal with students’ indiscipline, schools’ bad physical structure, limited number of Physics classes in high school level, lack of didactical laboratories and also they seem to be frightened that the expertise teachers do not be collaborative with the new ones. In this sense, the research outcomes shows the necessity of discussions about questions involving teachers knowledge, related to either, the Physics conceptual domain and the pedagogical one, since it matters directly to future teachers professional performance. Discussions in this sense can also help evaluation and restructuration of programs designed to initial and continuous teachers’ education.

Direito à soberania alimentar e ao patrimônio cultural: perspectivas para uma alimentação identitária

Pós-graduação em Direito - FCHS

Sistema informatizado para dispositivos móveis de coleta dos dados referentes à cesta básica do município de Botucatu/SP

The collection of prices for basic goods supply is very important for the population, based on the collection and processing of these data the CLI (Cost Living Index) is calculated among others, helping consumers to shop more rationally and with a clearer view of each product impact of each product on their household budget, not only food, but also cleaning products and personal hygiene ones. Nowadays, the project of collection of prices for basic goods supply is conducted weekly in Botucatu - SP through a spreadsheet. The aim of this work was to develop a software which utilized mobile devices in the data collection and storage phase, concerning the basic goods supply in Botucatu -SP. This was created in order to eliminate the need of taking notes in paper spreadsheets, increasing efficiency and accelerating the data processing. This work utilized the world of mobile technology and development tools, through the platform".NET" - Compact Framework and programming language Visual Basic".NET" was used in the handheld phase, enabling to develop a system using techniques of object oriented programming, with higher speed and reliability in the codes writing. A HP Pavilion dv3 personal computer and an Eten glofish x500+ handheld computer were used. At the end of the software development, collection, data storing and processing in a report, the phase of in loco paper spreadsheets were eliminated and it was possible to verify that the whole process was faster, more consistent, safer, more efficient and the data were more available.

SimSight: A Virtual Machine Based Dynamic Call Graph Generator

One problem with using component-based software development approach is that once software modules are reused over generations of products, they form legacy structures that can be challenging to understand, making validating these systems difficult. Therefore, tools and methodologies that enable engineers to see interactions of these software modules will enhance their ability to make these software systems more dependable. To address this need, we propose SimSight, a framework to capture dynamic call graphs in Simics, a widely adopted commercial full-system simulator. Simics is a software system that simulates complete computer systems. Thus, it performs nearly identical tasks to a real system but at a much lower speed while providing greater execution observability. We have implemented SimSight to generate dynamic call graphs of statically and dynamically linked functions in x86/Linux environment. A case study illustrates how we can use SimSight to identify sources of software errors. We then evaluate its performance using 12 integer programs from SPEC CPU2006 benchmark suite.

Designing Software Product Lines for Testability

Software product line (SPL) engineering offers several advantages in the development of families of software products such as reduced costs, high quality and a short time to market. A software product line is a set of software intensive systems, each of which shares a common core set of functionalities, but also differs from the other products through customization tailored to fit the needs of individual groups of customers. The differences between products within the family are well-understood and organized into a feature model that represents the variability of the SPL. Products can then be built by generating and composing features described in the feature model. Testing of software product lines has become a bottleneck in the SPL development lifecycle, since many of the techniques used in their testing have been borrowed from traditional software testing and do not directly take advantage of the similarities between products. This limits the overall gains that can be achieved in SPL engineering. Recent work proposed by both industry and the research community for improving SPL testing has begun to consider this problem, but there is still a need for better testing techniques that are tailored to SPL development. In this thesis, I make two primary contributions to software product line testing. First I propose a new definition for testability of SPLs that is based on the ability to re-use test cases between products without a loss of fault detection effectiveness. I build on this idea to identify elements of the feature model that contribute positively and/or negatively towards SPL testability. Second, I provide a graph based testing approach called the FIG Basis Path method that selects products and features for testing based on a feature dependency graph. This method should increase our ability to re-use results of test cases across successive products in the family and reduce testing effort. I report the results of a case study involving several non-trivial SPLs and show that for these objects, the FIG Basis Path method is as effective as testing all products, but requires us to test no more than 24% of the products in the SPL.

Mammography-based screening program: preliminary results from a first 2-year round in a Brazilian region using mobile and fixed units

Background: Breast cancer is the most frequently diagnosed cancer and the leading cause of cancer deaths among women worldwide. The use of mobile mammography units to offer screening to women living in remote areas is a rational strategy to increase the number of women examined. This study aimed to evaluate results from the first 2 years of a government-organized mammography screening program implemented with a mobile unit (MU) and a fixed unit (FU) in a rural county in Brazil. The program offered breast cancer screening to women living in Barretos and the surrounding area. Methods: Based on epidemiologic data, 54 238 women, aged 40 to 69 years, were eligible for breast cancer screening. The study included women examined from April 1, 2003 to March 31, 2005. The chi-square test and Bonferroni correction analyses were used to evaluate the frequencies of tumors and the importance of clinical parameters and tumor characteristics. Significance was set at p < 0.05. Results: Overall, 17 964 women underwent mammography. This represented 33.1% of eligible women in the area. A mean of 18.6 and 26.3 women per day were examined in the FU and MU, respectively. Seventy six patients were diagnosed with breast cancer (41 (54%) in the MU). This represented 4.2 cases of breast cancer per 1000 examinations. The number of cancers detected was significantly higher in women aged 60 to 69 years than in those aged 50 to 59 years (p < 0.001) or 40 to 49 years (p < 0.001). No difference was observed between women aged 40 to 49 years and those aged 50 to 59 years (p = 0.164). The proportion of tumors in the early (EC 0 and EC I) and advanced (CS III and CS IV) stages of development were 43.4% and 15.8%, respectively. Conclusions: Preliminary results indicate that this mammography screening program is feasible for implementation in a rural Brazilian territory and favor program continuation.

Dietary intake of environmentally persistent plaguicides in the european population

[EN] Global pollution has become one of the most important problems of the modern societies and pesticides play a major role among the chemical contaminants that are released to the environment every year. Organochlorine compounds have been widely used in the past all over the world as pesticides and some of them are still used for the control of vectors of infectious diseases. Due to their high lipophilicity, stability and resistance to degradation, most of them have been banned or strictly regulated but their levels remain high in the environment as persistent organic pollutants (POPs). Their presence in the environment leads to their introduction into the food chain, especially affecting food of animal origin with higher fat content. Due to their liposolubility, these substances tend to be bioaccumulated into the fat tissues of living beings along their entire lives, and to be biomagnificated across trophic levels in the food chain. Thus, the main human source of these pesticides comes from the daily intake of contaminated food from environmental sources. It has been established the role of many of the POPs as endocrine disruptors and even as carcinogenic agents, being thus considered as important risk factors for health. Moreover, chronic exposure to pesticides, even at very low levels, has been related with cancer, fertility problems, immunosuppression and other diseases. For this reason, it is important to know the level of POPs contamination and to identify the main sources contributing to it. Fish, meat and dairy products are the food groups with the highest levels of pollution. However, the residue levels vary by geographic area, and are influenced by several factors as food security policies, local pesticide use patterns, environmental practices, or the time when the study is conducted. Food habits, conditioned by different social and economic factors, as well as several biological factors (i.e. gender, sex and age), determine the levels of POPs exposure in the population. The purpose of this chapter is to give an overview of the dietary intake of environmentally persistent pesticides by the European population, and the potential adverse consequences of this exposure on human health.

Desarrollo de un sistema de videoconferencia en HTML 5.0

[ES] Webcam App es una aplicación que tiene como principal objetivo social que las personas puedan realizar videoconferencias a través de la web de forma gratuita y sencilla. Para el desarrollo de la misma, fueron de gran utilidad los elementos que brinda HTML5.0 para dar soporte multimedia: y . También, se usan dos de las APIs que implementa WebRTC para la trasmisión de audio y video en tiempo real, obtenidos desde la webcam: MediaStream (getUserMedia) y RTCPeerConnection. Para soportar esta aplicación se elige Node.js como servidor web, pues entre sus puntos fuertes está la capacidad de mantener varias conexiones abiertas, característica fundamental en una aplicación de videollamadas, donde miles de usuarios crean y envían solicitudes de conexión simultáneamente. Con el fin de aportarle una apariencia agradable a la aplicación, un entorno usable y conocido para los usuarios, se utiliza CMS Elgg como marco de red social. CMS Elgg provee de funcionalidades comunes, como por ejemplo: conectar con amigos, enviar mensajes, compartir contenido. Como metodología base se usa el Proceso Unificado de Desarrollo de Software, posibilitando que la realización de este trabajo se haya hecho de una manera organizada y se obtuvieran artefactos para el desarrollo. Como resultado del trabajo, se obtiene una solución Open Source que sirve como un modelo de comunicación en tiempo real sin necesidad de descargar, instalar o actualizar ningún complemento de terceros y que demuestra la fiabilidad de los sistemas basados en HTML5 y WebRTC.

LeeMed

[ES] La irrupción actual de los teléfonos inteligentes (smartphones) equipados con diversos sensores y herramientas nativas, propicia la posibilidad de crear una gran gama de aplicaciones para mejorar la vida de personas con discapacidades. Con este proyecto se pretende cubrir estos objetivos: explorar las distintas posibilidades que ofrece la plataforma Android para implementar métodos de interacción hombre-máquina adaptados a personas con discapacidad visual. Identificar las problemáticas que afectan a las personas con discapacidad visual en el ámbito sociosanitario. Desarrollar una aplicación de carácter social que contribuya a mejorar la calidad de vida de estas personas. Como resultado del trabajo, se ha desarrollado una aplicación software llamada LeeMed, que consiste en una app para la plataforma Android, dirigida a personas con discapacidad visual, para la consulta de prospectos de medicamentos a través de múltiples interfaces humanas. El trabajo ha abordado tres tipos de interfaces: la oral (órdenes de voz), la gestual y la convencional de menús y opciones (GUI)