Efeito do gradiente interior-borda-matriz, e do tipo de matriz sobre a entomofaúna edáfica em fragmentos de cerrado

edge effect. Thus, under the influence of the adjacent matrix, fragments undergo microclimatic alterations that accentuate changes in species composition and community structure. In order to better understand edge and matrix effects on the richness and abundance of edaphic arthropods, this study assessed: (a) the difference between habitat (fragment) and non-habitat (matrix); (b) whether there is a continuous interior-edge-matrix gradient; and (c) the difference between matrices for arthropod orders richness and abundance. We selected 15 landscapes, 5 of which contained a cerrado fragment surrounded by sugarcane cultivation, 5 with a cerrado fragment within eucalyptus and 5 with a cerrado fragment within pasture. In each landscape the soil fauna was collected along with the soil and then extracted with the aid of the modified Berlese-Tullgren funnel. We chose the orders Coleoptera, Collembola, Mesostigmata and Oribatida for analysis, and after separation of the individuals we used model selection analysis via AIC. The model type fragment x matrix was the most likely to explain richness, total and relative abundances of the four orders (wAICc between 0,6623 and 1,0). The model of edge distance (edge effect) was plausible to total abundance and relative abundance of Mesostigmata order (wAICc=0,2717 and 0,186). Local environmental variables (soil texture, temperature and relative humidity), and fragment size were also measured to avoid confounding factors and were not presented as plausible models to explain the patterns. So edaphic arthropods, despite protecting themselves under the ground, are extremely sensitive to fragmentation, even with the replacement of natural habitat by agricultural use, such as sugarcane, pasture and eucalyptus. This group should be studied environmental impact assessments because provides important ecosystem se ravincde s inacnludd eisd ainn efficient bio-indicator

Padrões evolutivos de famílias multigênicas de RNAs (RNAsn e RNAr) no genoma do gafanhoto Abracris flavolineata, com ênfase no cromossomo B

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeito do gradiente interior-borda-matriz, e do tipo de matriz sobre a entomofaúna edáfica em fragmentos de cerrado

edge effect. Thus, under the influence of the adjacent matrix, fragments undergo microclimatic alterations that accentuate changes in species composition and community structure. In order to better understand edge and matrix effects on the richness and abundance of edaphic arthropods, this study assessed: (a) the difference between habitat (fragment) and non-habitat (matrix); (b) whether there is a continuous interior-edge-matrix gradient; and (c) the difference between matrices for arthropod orders richness and abundance. We selected 15 landscapes, 5 of which contained a cerrado fragment surrounded by sugarcane cultivation, 5 with a cerrado fragment within eucalyptus and 5 with a cerrado fragment within pasture. In each landscape the soil fauna was collected along with the soil and then extracted with the aid of the modified Berlese-Tullgren funnel. We chose the orders Coleoptera, Collembola, Mesostigmata and Oribatida for analysis, and after separation of the individuals we used model selection analysis via AIC. The model type fragment x matrix was the most likely to explain richness, total and relative abundances of the four orders (wAICc between 0,6623 and 1,0). The model of edge distance (edge effect) was plausible to total abundance and relative abundance of Mesostigmata order (wAICc=0,2717 and 0,186). Local environmental variables (soil texture, temperature and relative humidity), and fragment size were also measured to avoid confounding factors and were not presented as plausible models to explain the patterns. So edaphic arthropods, despite protecting themselves under the ground, are extremely sensitive to fragmentation, even with the replacement of natural habitat by agricultural use, such as sugarcane, pasture and eucalyptus. This group should be studied environmental impact assessments because provides important ecosystem se ravincde s inacnludd eisd ainn efficient bio-indicator

Celti e Reti tra V e I sec. a.C. Oggetti tipo LaTène all'interno della cerchia culturale Fritzens-Sanzeno (arco alpino centro-orientale)

The study of the objects LaTène type found in middle-eastern alpine region (Trentino Alto Adige-Südtirol, Engadina, North Tirol, Voralberg and Villach basin) is aimed to a better comprehension of the complex net of relationships established among the Celts, settled both in the central Europe territories and, since the IV century b.C., in the Po Plain, and the local populations. The ancient authors, who called the inhabitants of this area Raeti, propose for this territory the usual pattern according to which, the population of a region was formed consequently to a migration or was caused by the hunting of pre-existing peoples. The archaeologists, in the last thirty years, recognized a cultural facies typical of the middle-eastern alpine territory during the second Iron Age, and defined that as Fritzens-Sanzeno culture (from the sites of Fritzens, Inn valley, and Sanzeno, Non Valley). The so-called Fritzens-Sanzeno culture spread out without breaks from the material culture of the final Bronze Age and the first Iron Age. This local substratum, characterized by a ceramic repertoire strongly standardized, by peculiar architectural solutions and by a particular typology of rural sacred places (Brandopferplätze), accepted, above all during the second Iron Age, the strong influences coming from the Etruscan world and from the Celtic one (evident in the presence of objects of ornament, of glass artefacts, of elements of the weaponry and of coins). The objects LaTène type become, with different degrees of reliability, important markers of the relationships existing between the Celts and the Raeti, although the ways of interaction (cultural influence, people's movements, commercial exchanges, gifts among élites etc.) is not still clear. The revision of published data and the study of unpublished materials allows to define a rich and articulated picture both to chronological level and to territorial one.

Analysis of the memory B cell response against glycoconjugate vaccines

The development of vaccines directed against polysaccharide capsules of S. pneumoniae, H. influenzae and N. meningitidis have been of great importance in preventing potentially fatal infections. Bacterial capsular polysaccharides are T-cell-independent antigens that induce specific antibody response characterized by IgM immunoglobulins, with a very low IgG class switched response and lack of capability of inducing a booster response. The inability of pure polysaccharides to induce sustained immune responses has required the development of vaccines containing polysaccharides conjugated to a carrier protein, with the aim to generate T cell help. It is clear that the immunogenicity of glycoconjugate vaccines can vary depending on different factors, e.g. chemical nature of the linked polysaccharide, carrier protein, age of the target population, adjuvant used. The present study analyzes the memory B cell (MBC) response to the polysaccharide and to the carrier protein following vaccination with a glycoconjugate vaccine for the prevention of Group B streptococcus (GBS) infection. Not much is known about the role of adjuvants in the development of immunological memory raised against GBS polysaccharides, as well as about the influence of having a pre-existing immunity against the carrier protein on the B cell response raised against the polysaccharide component of the vaccine. We demonstrate in the mouse model that adjuvants can increase the antibody and memory B cell response to the carrier protein and to the conjugated polysaccharide. We also demonstrate that a pre-existing immunity to the carrier protein favors the development of the antibody and memory B cell response to subsequent vaccinations with a glycoconjugate, even in absence of adjuvants. These data provide a useful insight for a better understanding of the mechanism of action of this class of vaccines and for designing the best vaccine that could result in a productive and long lasting memory response.

Studio di un azionamento brushless di tipo predittivo per la trazione in un veicolo elettrico ibrido

Nel campo dell’automotive, negli ultimi anni, gli sviluppi sono stati consistenti: infatti sono state introdotte sul mercato molte novità, tra le quali vetture con propulsione elettrica o ibrida. Il controllo del motore termico durante il moto è studiato da moltissimi anni, mentre il controllo di un motore elettrico è tuttora in fase di continua ricerca e sviluppo. Infatti, con l’introduzione di tecniche vettoriali, si sono ottenuti notevoli miglioramenti a livello di qualità di utilizzo del motore elettrico stesso. In particolare, l’introduzione di un nuovo metodo di controllo che prende il nome di “controllo predittivo” cerca di ottimizzare ulteriormente la propulsione elettrica. Oggetto di studio in questa tesi è il controllo predittivo implementato per la regolazione delle correnti di statore in un motore brushless. Dopo una presentazione di carattere generale, che spazia dalle tipologie di vetture elettriche alle batterie utilizzate a bordo, passando dai vari tipi di propulsori elettrici verosimilmente utilizzabili, viene descritto, a livello teorico, il sistema utilizzato nelle simulazioni in questa tesi, prestando particolare attenzione alla macchina sincrona brushless a magneti permanenti ed al suo controllo vettoriale oltre che alla tecnica per un corretto deflussaggio. Successivamente sono descritti il controllo predittivo di corrente utilizzato nelle simulazioni, con un occhio di riguardo alla compensazione del ritardo di calcolo necessario per ottimizzare ulteriormente il controllo del motore di trazione elettrico, e la modellizzazione del veicolo elettrico ibrido in ambiente Simulink di Matlab, rimandando alle Appendici A e B per la eventuale consultazione dei codici implementati. Infine sono presentati i risultati ottenuti con vari tipi di prove per verificare se effettivamente il veicolo esegue ciò che è richiesto.

Método de evaluación a campo de la resistencia al moho azul en clones de ajo tipo colorado

Con el objeto de ajustar un método de evaluación a campo para facilitar la selección de clones de ajo (Allium sativum L.) con resistencia a Penicillium allii, se realizó un ensayo replicado en el cual se midió la respuesta de tres clones experimentales a la infección, en dos épocas de plantación. Los tratamientos incluyeron combinaciones de presencia o ausencia de: a) desinfección de la "semilla", b) heridas artificiales en los bulbillos, c) inoculación artificial. Los bulbillos con la hoja envolvente se desinfectaron con una solución diluida de hipoclorito de sodio. La inoculación se realizó mediante la inmersión en una solución de 106 esporas•ml-1. Las heridas se realizaron con una lanceta (blood lancet). Los bulbillos se incubaron en cámara húmeda durante 24 horas a 20 °C, antes de plantación. Las variables respuestas computadas fueron las siguientes: número de plantas muertas, y vivas con síntomas y sin síntomas, a los 152 días de plantación en la primera época y 118 días en la segunda; número de bulbos por calibres y rendimiento a cosecha. La información obtenida se analizó a través de correspondencia simple, diferencia de proporciones y análisis paramétricos. Se detectaron mayores diferencias entre los tratamientos en la tasa de sobrevivencia y en la proporción de calibres comerciales en la época tardía. No se observaron diferencias (p < 0,05) del rendimiento en la plantación temprana. La herida fue determinante en el ingreso del patógeno. Los tratamientos quedaron limitados a un testigo: desinfectado, no inoculado y sin herida, y a un tratamiento: desinfectado, con inoculación y herida. Con respecto a la época, resultó conveniente la evaluación en plantaciones tardías porque se expresan mejor las diferencias entre los tratamientos.

Buque LNG con tanques tipo membrana

TIPO DE BUQUE: LNG con tanques tipo membrana. TRIPULACIÓN: 30 personas PESO MUERTO: 32000 Toneladas VELOCIDAD EN PRUEBAS: 17,5 nudos al 90% de la M.C.R, 21 % de margen de mar. PROPULSIÓN: Turbina marina a vapor. Hélice de palas fijas CAPACIDAD DE ALMACENAMIENTO: 4 bodegas con tanques de tipo membrana de capacidad total de 51000 m3 (100 % y –163ºC). Combustible 3000 m3. D.O 250 m3. Agua dulce 200 m3. Agua destilada 200 m3. Aceite 200 m3. EQUIPO DE MANIPULACIÓN DE CARGA: 8 bombas de descarga de 700 m3/h a 150 mcl, 4 bombas de achique de 25 m3/h a 150 mcl CLASIFICACIÓN Y COTA: Bureau Veritas.+I3/3, Liquified Gas Carrier, deep sea, AUT, AUTPORT. REGLAMENTOS Y LIMITACIONES: B.V, SOLAS código gas. OTROS REQUERIMIENTOS: Gas inerte. Generador de nitrógeno. Detección de gases en espacios vacíos y lastres.

Morteros fotocatalíticos: análisis de su autolimpieza en función del tipo de cemento y rugosidad superficial.

En este Trabajo fin de master se explicará el funcionamiento de la fotocatálisis que presentan los materiales con adición de óxido de titanio en tamaño de nanopartículas, el cual les confiere ciertas cualidades especiales. Una vez conocido el funcionamiento de la fotocatálisis se estudiará la influencia de ciertos factores, que no han sido tratados en profundidad hasta el momento en los materiales en base cemento, para mejorar las propiedades autolimpiantes, como son; el tipo de cemento o la rugosidad superficial, ya que sin duda, la composición que tenga el cemento y la rugosidad que se le confiera en los acabados, influirá en el comportamiento autolimpiante, por ello se hace necesario un estudio en el que se evaluarán que cementos proporcionan una mayor efectividad en función de sus composición y que rugosidad superficial funciona mejor en la autolimpieza, debido a esto se estudiarán morteros con acabados lisos y con distintas rugosidades hasta 1.5mm de irregularidad. Para poder realizar este estudio se elaborará una caracterización de los morteros, que se utilizarán en la evaluación de las cualidades autolimpiantes, comparándolos con otros de idéntica dosificación, pero sin adición de oxido de titanio. Posteriormente sabiendo cuantitativamente cuales son sus características y si la adición de oxido de titanio modifica alguna de sus propiedades, pasar a evaluar sus características autolimpiantes, esto se hará, añadiendo a las probetas perfectamente curadas por inmersión durante mas de 28 días, distintos colorantes en disoluciones acuosa, como son la Rodamina B y el Azul de metileno. Una vez coloreadas las probetas, se medirá la degradación del color mediante un aparato conocido como espectrofotómetro, el cual nos dirá la variación de color en escala CIELAB. Con estos datos se podrá cuantificar de una manera más o menos precisa cuales son los cementos que presentan unas cualidades autolimpiantes mejores y cuales son los acabados superficiales, que presentan mayor autolimpieza, datos importantes de conocer a la hora de fabricar elementos a los cuales se les quiera dotar de este tipo de cualidades.

Calibración de una nariz electrónica tipo QCM y relación con las especificaciones para la calidad de la pera.

Las microbalanzas de cristal de cuarzo (QCM), son mecanismos piezoeléctricos, para transformarlos en sensores químicos es necesario recubrirlos con una capa de material capaz de capturar las moléculas del ambiente. Cuando una masa es adsorbida sobre la superficie del cristal, la frecuencia de oscilación cambia en proporción a la cantidad de masa (Di Natale et al. 1997). La respuesta de los sensores depende de numerosos factores que pueden ser difíciles de controlar, tales como la temperatura y la humedad del gas portador. Todos estos factores producen cambios en la selectividad de los sensores que afectan a la reproducibilidad de las medidas. A pesar de la existencia de numerosos estudios no existe ningún procedimiento establecido para la calibración de las QCM en relación con la sensibilidad necesaria en los sensores para el aseguramiento de la calidad en pera o en otras frutas.

Evolução do controle de constitucionalidade de tipo francês

Inclui notas explicativas, bibliográficas e bibliografia

La narrativa en La Ilustración (1849-1857): la «Serie B» del Semanario Pintoresco Español

En los ocho años de vida de La Ilustración, la narrativa, larga y breve, fue uno de los elementos fundamentales de este periódico ilustrado. El artículo analiza los relatos que allí aparecieron y los efectos que las necesidades industriales y comerciales tuvieron en una revista que luchaba por sobrevivir económicamente. Ángel Fernández de los Ríos, propietario del Semanario Pintoresco Español y de La Ilustración, convirtió a esta última, en lo que toca a la narrativa, en una especie de serie B, en la que se entremezclaban reediciones, traducciones y colaboraciones que no habían llegado a tener el nivel suficiente para llegar a las páginas del Semanario Pintoresco Español. La abundancia de reediciones y las diversas fuentes de las que proceden hacen ver que en su selección fue más importante la imperiosa necesidad de sacar la publicación a la calle cada quince días que otros criterios. Ello también explica la abundancia de traducciones de novelas y cuentos en las páginas de La Ilustración. Traducciones y reediciones son el cuerpo principal de la narrativa publicada en La Ilustración y si tenemos que detenernos en las obras de más calidad que allí aparecen, será en este tipo de relatos, puesto que los textos narrativos originales, muy a menudo publicados sin firma de autor, resultan de muy escaso interés. Solo podemos contra con la excepción de dos relatos de José Güell y Renté (Anacaona y Quibiam) y uno de Gertrudis Gómez de Avellaneda: La baronesa de Joux. No representa, pues, La Ilustración una fuente de importancia para la narración española del medio siglo. Su posición subordinada al Semanario Pintoresco Español impidió que la publicación desarrollara una línea de narraciones de calidad. Es testimonio, sin embargo, de un proceso de industrialización de la labor periodística y literaria que estaba desarrollándose con gran celeridad si tenemos en cuenta el fracaso de El Artista y del No me olvides apenas quince años antes. A la altura del medio siglo el periodismo literario se había convertido en una industria que exigía ingentes esfuerzos de trabajo y una producción torrencial.

Características bioativas, funcionais e efeito protetor do resíduo desidratado de camu-camu (Myrciaria dubia H.B.K. (McVaugh)) sobre doenças degenerativas utilizando modelos in vivo C. elegans

Camu-camu (Myrciaria dubia H.B.K. (McVaugh)) is a native Amazon fruit, recognized worldwide as one of the main natural sources of ascorbic acid. Due to its great acidity, this fruit is generally consumed after processing into juice or as ingredient in food preparations. As a co-product of the camu-camu processing, a significant amount of agroindustrial residue is generated. Despite the studies showing the bioactive value and biological potential of the fruit, few studies have approached the possible processing techniques, transformation and preservation of camu-camu fruits and its agroindustrial pomace. Therefore, the present work has the objective of evaluating two different drying processes applied to camu-camu pomace (peel and seeds with residual pulp), freeze drying and hot air drying, in order to obtain a functional fruit product. This thesis was divided into three stages: the first one shows the studies related to the freeze drying and hot air drying, where we demonstrated the impact of the selected drying techniques on the bioactive components of camu-camu, taking the fresh pomace as the control group. Among the investigated conditions, the groups obtained at 50ºC and 4 m/s (SC50) and 80ºC and 6 m/s (SC80) were selected as for further studies, based on their ascorbic acid final content and Folin-Ciocalteau reducing capacity. In addition to SC50 and SC80, the fresh pomace (RF) and freeze dried (RL) samples were also evaluated in these further stages of the research. Overall, the results show higher bioactive concentration in the RF samples, followed by RL, SC50 and SC80. On the second step of the research, the antioxidant, antimicrobial and antienzymatic activities were evaluated and the same tendency was observed. It was also reported, for the first time in the literature, the presence of syringic acid in dried camu-camu pomace. In the third and final stage of the research, it was investigated the effect of dried camu-camu on aging and neuroprotective disorders, using the in vivo model C.elegans. It was observed that camu-camu extracts were able to modulate important signaling genes relevant to thermal and oxidative stresses (p < 0.05). The polar acid, polar basic and polar neutral fractions obtained from the low molecular extracts of SC50 were able to extend the lifespan of wild type N2 C. elegans in 20% and 13% (p < 0.001). Results also showed that the paralysis induced by the β1-42 amyloid was significantly (p < 0.0001) retarded in CL4176 worms. Similarly, the camu-camu extracts attenuated the dopaminergic induction associated to Parkinson’s disease. Finally, a global analysis of the data presented here reveal that the camu-camu pomace, a co-product obtained from the industrial processing of a native Brazilian fruit, is a relevant natural source of health relevant compounds. This thesis, shows for the first time, the multifunctionality of camu-camu pomace, a natural resource still underexploited for scientific, commercial and technological purposes.

Avaliação do desempenho de argamassas à base de cimento Portland para rejuntamento de placas cerâmicas tipo II com adição de pó de borracha de pneus

In this work it is assessed the performance of Portland cement-based mortar to the grouting of type II ceramic plates with the addition of unusable tire rubber powder. It is presented a bibliographical review about the subject in which is done the theoretical and methodological foundation of the whole investigative process. The analyzed universe comprises a sample of mortar to the grouting of conventional ceramic plates type II (reference sample) and five more samples to the grouting of ceramic plates type II, which were made up of the addition of unusable tire rubber powder in the respective proportion (in mass) of 4%, 8%, 12%, 16% and 20%. These mortar samples were subject to the trials of determination of the consistency index (Brazilian Standard NBR 13276:2005), water retention ( Brazilian Standard NBR 14992 Attachment B:2003), permeability in 240 minutes (Brazilian Standard NBR 14992 Attachment G:2003), absorption of water by immersion (Brazilian Standard NBR 9781:2013), resistance to compression (Brazilian Standard NBR14992 Attachment D: 2003), resistance to traction in the flexion (Brazilian Standard NBR 13279:2005), resistance of traction adherence (Brazilian Standard NBR 14081 part 4:2012) and hardened mass density (Brazilian Standard NBR 13280: 2005). It has been found out from the analyzes of the results in the trial the following situation: the reference mortar used met the established requirements in the norms of specifications corresponding to only six from the eight parameters assessed in the research; the mortar with addition of 4,0% of tire rubber powder met the established requirements corresponding to only the resistance to compression and the resistance of adherence to traction. Thus, the other kinds of mortar with addition of 8,0 %, 12,0 %, 16,0 % and 20,0 % of tire rubber powder met the requirements of specifications corresponding to only the resistance to compression and the resistance of adherence to traction. This result concludes that the adding of tire rubber powder does not grant improvement to the mortar of type II grouting to the laying of ceramic plates.

Avaliação do desempenho de argamassas à base de cimento Portland para rejuntamento de placas cerâmicas tipo II com adição de pó de borracha de pneus

In this work it is assessed the performance of Portland cement-based mortar to the grouting of type II ceramic plates with the addition of unusable tire rubber powder. It is presented a bibliographical review about the subject in which is done the theoretical and methodological foundation of the whole investigative process. The analyzed universe comprises a sample of mortar to the grouting of conventional ceramic plates type II (reference sample) and five more samples to the grouting of ceramic plates type II, which were made up of the addition of unusable tire rubber powder in the respective proportion (in mass) of 4%, 8%, 12%, 16% and 20%. These mortar samples were subject to the trials of determination of the consistency index (Brazilian Standard NBR 13276:2005), water retention ( Brazilian Standard NBR 14992 Attachment B:2003), permeability in 240 minutes (Brazilian Standard NBR 14992 Attachment G:2003), absorption of water by immersion (Brazilian Standard NBR 9781:2013), resistance to compression (Brazilian Standard NBR14992 Attachment D: 2003), resistance to traction in the flexion (Brazilian Standard NBR 13279:2005), resistance of traction adherence (Brazilian Standard NBR 14081 part 4:2012) and hardened mass density (Brazilian Standard NBR 13280: 2005). It has been found out from the analyzes of the results in the trial the following situation: the reference mortar used met the established requirements in the norms of specifications corresponding to only six from the eight parameters assessed in the research; the mortar with addition of 4,0% of tire rubber powder met the established requirements corresponding to only the resistance to compression and the resistance of adherence to traction. Thus, the other kinds of mortar with addition of 8,0 %, 12,0 %, 16,0 % and 20,0 % of tire rubber powder met the requirements of specifications corresponding to only the resistance to compression and the resistance of adherence to traction. This result concludes that the adding of tire rubber powder does not grant improvement to the mortar of type II grouting to the laying of ceramic plates.