Fabrication and structural characterization of bismuth niobate thin films grown by chemical solution deposition

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Innovative low temperature plasma approach for deposition of alumina films

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Co-deposition of gold nanoparticles and metalloporphyrin using the langmuir-blodgett (LB) technique for Surface-Enhanced Raman Scattering (SERS)

The synergistic effect produced by metallic nanoparticles when incorporated into different systems empowers a research field that is growing rapidly. In addition, organometallic materials are at the center of intensive research with diverse applications such as light-emitting devices, transistors, solar cells, and sensors. The Langmuir-Blodgett (LB) technique has proven to be suitable to address challenges inherent to organic devices, since the film properties can be tuned at the molecular level. Here we report a strategy to incorporate gold nanoparticles (AuNPs) into the LB film by co-deposition in order to achieve surface-enhanced Raman scattering (SERS) of the zinc(II)-protoporphyrin (IX) dimethyl ester (ZnPPIX-DME). Prior to the LB co-deposition, the properties of the Langmuir monolayer of ZnPPIX-DME at the air-water interface, containing AuNPs in the subphase, are studied through the surface-pressure versus mean molecular area (π-A) isotherms. The ZnPPIX-DME+AuNPs π-A isotherm presented a significant shift to higher molecular area, suggesting an interaction between both ZnPPIX-DME molecules and AuNPs. Those interactions are a key factor allowing the co-deposition of both AuNPs and ZnPPIX-DME molecules onto a solid substrate, thus forming the LB film. SERS of ZnPPIX-DME was successfully attained, ensuring the spatial distribution of the AuNPs. Higher enhancement factors were found at AuNP aggregates, as a result of the intense local electromagnetic field found in the metal nanoparticle aggregates. The main vibrational bands observed in the SERS spectra suggest a physical adsorption of the ZnPPIX-DME onto the surface of AuNPs. The latter is not only in agreement with the interactions pointed out by the π-A isotherms but also suggests that this interaction is kept upon LB film co-deposition.

Monoamine oxidase B layer-by-layer film fabrication and characterization toward dopamine detection

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of the deposition parameters on the morphology and electrical conductivity of PANI/PSS self-assembled films

The influence of deposition parameters, namely polymer concentration and pH of the deposition solution, cleaning, and drying steps on the morphology and electrical characteristics of polyaniline and sulfonated polystyrene (PANI/PSS) nanostructured films deposited by the self-assembly technique is evaluated by UV-Vis spectroscopy, optical and atomic force microscopy, and electrical resistance measurements. It is found that stirring the cleaning solution during the cleaning step is crucial for obtaining homogenous films. Stirring of the cleaning solution also influences the amount of PANI adsorbed in the films. In this regard, the drying process seems to be less critical since PANI amount and film thickness are similar in films dried with N-2 flow or with an absorbent tissue. It is observed, however, that drying with N-2 flow results in rougher films. As an additional point, an assessment of the influence of the deposition method (manual versus mechanical) on the film characteristics was carried out. A significant difference on the amount of PANI and film thickness between films prepared by different human operators and by a homemade mechanical device was observed. The variability in film thickness and PANI adsorbed amount is smaller in films mechanically assembled. (c) 2007 Elsevier B.V. All rights reserved.

Gold nanoparticle formation in diamond-like carbon using two different methods: Gold ion implantation and co-deposition of gold and carbon

We describe work in which gold nanoparticles were formed in diamond-like carbon (DLC), thereby generating a Au-DLC nanocomposite. A high-quality, hydrogen-free DLC thin film was formed by filtered vacuum arc plasma deposition, into which gold nanoparticles were introduced using two different methods. The first method was gold ion implantation into the DLC film at a number of decreasing ion energies, distributing the gold over a controllable depth range within the DLC. The second method was co-deposition of gold and carbon, using two separate vacuum arc plasma guns with suitably interleaved repetitive pulsing. Transmission electron microscope images show that the size of the gold nanoparticles obtained by ion implantation is 3-5 nm. For the Au-DLC composite obtained by co-deposition, there were two different nanoparticle sizes, most about 2 nm with some 6-7 nm. Raman spectroscopy indicates that the implanted sample contains a smaller fraction of sp(3) bonding for the DLC, demonstrating that some sp(3) bonds are destroyed by the gold implantation. (C) 2012 American Institute of Physics. [http://dx.doi.org/10.1063/1.4757029]

Nanogravimetric study of lead underpotential deposition on selenium thin films as a semiconductor alloy formation procedure

An electrochemical quartz crystal microbalance Au electrode modified with a Se thin film was used to investigate the electrochemical behavior of lead ad-atoms using underpotential deposition (UPD) conditions. A specific quasi-reversible process was observed during the reduction of Pb2+ on Se thin films in perchloric acid media. The charge density of Pb ad-atoms on Se thin film (46.86 mu C cm(-2)) suggests a recovery of 0.1 monolayers, which is in good agreement with EQCM data. The Se thin film can be successfully alloyed with Pb atoms that are deposited by chronoamperometry using time intervals large enough to allow for diffusion toward the inner Se phase. Linear sweep voltammetry combined with EQCM in perchloric acid was used to characterize the amount of Pb absorbed in the Se thin film. These findings offer a new strategy for alloy formation in semiconductor films using UPD as an effective tool to quantify the exact amount of the incorporated metal.

In situ real-time investigation of Organic Ultra-Thin-Film transistors: growth, electrical properties and biosensing applications

Organic electronics has grown enormously during the last decades driven by the encouraging results and the potentiality of these materials for allowing innovative applications, such as flexible-large-area displays, low-cost printable circuits, plastic solar cells and lab-on-a-chip devices. Moreover, their possible field of applications reaches from medicine, biotechnology, process control and environmental monitoring to defense and security requirements. However, a large number of questions regarding the mechanism of device operation remain unanswered. Along the most significant is the charge carrier transport in organic semiconductors, which is not yet well understood. Other example is the correlation between the morphology and the electrical response. Even if it is recognized that growth mode plays a crucial role into the performance of devices, it has not been exhaustively investigated. The main goal of this thesis was the finding of a correlation between growth modes, electrical properties and morphology in organic thin-film transistors (OTFTs). In order to study the thickness dependence of electrical performance in organic ultra-thin-film transistors, we have designed and developed a home-built experimental setup for performing real-time electrical monitoring and post-growth in situ electrical characterization techniques. We have grown pentacene TFTs under high vacuum conditions, varying systematically the deposition rate at a fixed room temperature. The drain source current IDS and the gate source current IGS were monitored in real-time; while a complete post-growth in situ electrical characterization was carried out. At the end, an ex situ morphological investigation was performed by using the atomic force microscope (AFM). In this work, we present the correlation for pentacene TFTs between growth conditions, Debye length and morphology (through the correlation length parameter). We have demonstrated that there is a layered charge carriers distribution, which is strongly dependent of the growth mode (i.e. rate deposition for a fixed temperature), leading to a variation of the conduction channel from 2 to 7 monolayers (MLs). We conciliate earlier reported results that were apparently contradictory. Our results made evident the necessity of reconsidering the concept of Debye length in a layered low-dimensional device. Additionally, we introduce by the first time a breakthrough technique. This technique makes evident the percolation of the first MLs on pentacene TFTs by monitoring the IGS in real-time, correlating morphological phenomena with the device electrical response. The present thesis is organized in the following five chapters. Chapter 1 makes an introduction to the organic electronics, illustrating the operation principle of TFTs. Chapter 2 presents the organic growth from theoretical and experimental points of view. The second part of this chapter presents the electrical characterization of OTFTs and the typical performance of pentacene devices is shown. In addition, we introduce a correcting technique for the reconstruction of measurements hampered by leakage current. In chapter 3, we describe in details the design and operation of our innovative home-built experimental setup for performing real-time and in situ electrical measurements. Some preliminary results and the breakthrough technique for correlating morphological and electrical changes are presented. Chapter 4 meets the most important results obtained in real-time and in situ conditions, which correlate growth conditions, electrical properties and morphology of pentacene TFTs. In chapter 5 we describe applicative experiments where the electrical performance of pentacene TFTs has been investigated in ambient conditions, in contact to water or aqueous solutions and, finally, in the detection of DNA concentration as label-free sensor, within the biosensing framework.

Preparation and study of magnetic thin film based sub-micron structures

Due to its high Curie temperature of 420K and band structure calculations predicting 100% spin polarisation, Sr2FeMoO6 is a potential candidate for spintronic devices. However, the preparation of good quality thin films has proven to be a non-trivial task. Epitaxial Sr2FeMoO6 thin films were prepared by pulsed laser deposition on different substrates. Differing from previous reports a post-deposition annealing step at low oxygen partial pressure (10-5 mbar) was introduced and enabled the fabrication of reproducible, high quality samples. According to the structural properties of the substrates the crystal structure and morphology of the thin films are modified. The close interrelation between the structural, magnetic and electronic properties of Sr2FeMoO6 was studied. A detailed evaluation of the results allowed to extract valuable information on the microscopic nature of magnetism and charge transport. Smooth films with a mean roughness of about 2 nm have been achieved, which is a pre-requisite for a possible inclusion of this material in future devices. In order to establish device-oriented sub-micron patterning as a standard technique, electron beam lithography and focussed ion beam etching facilities have been put into operation. A detailed characterisation of these systems has been performed. To determine the technological prospects of new spintronics materials, the verification of a high spin polarisation is of vital interest. A popular technique for this task is point contact Andreev reflection (PCAR). Commonly, the charge transport in a transparent metal-superconductor contact of nanometer dimensions is attributed solely to coherent transport. If this condition is not fulfilled, inelastic processes in the constriction have to be considered. PCAR has been applied to Sr2FeMoO6 and the Heusler compound Co2Cr0.6Fe0.4Al. Systematic deviations between measured spectra and the standard models of PCAR have been observed. Therefore existing approaches have been generalised, in order to include the influence of heating. With the extended model the measured data was successfully reproduced but the analysis has revealed grave implications for the determination of spin polarisation, which was found to break down completely in certain cases.

Deposizione elettrochimica di film polimerici foto-attivi per la realizzazione di celle solari

Plastic solar cells bear the potential for large-scale power generation based on flexible, lightweight, inexpensive materials. Since the discovery of the photo-induced electron transfer from a conjugated polymer (electron-donor) to fullerene or its derivatives molecules (electron-acceptors), followed by the introduction of the bulk heterojunction concept which means donors and acceptors blended together to realize the fotoactive layer, materials and deposition techniques have been extensively studied. In this work, electrochemical-deposition methods of polymeric conductive films were studied in order to realize bulk heterojunction solar cells. Indium Tin Oxide (ITO) glass electrodes modified with a thin layer of poly(3,4-ethylenedioxythiophene) (PEDOT) were electrochemically prepared under potentiodynamic and potentiostatic conditions; then those techniques were applied for the electrochemical co-deposition of donor and acceptor on modified ITO electrode to produce the active layer (blend). For the deposition of the electron-donor polymer the electropolymerization of many functionalized thiophene monomers was investigated while, as regards acceptors, fullerene was used first, then the study was focused on its derivative PCBM ([6,6]-phenyl-C61-butyric acid methyl ester). The polymeric films obtained (PEDOT and blend) were electrochemically and spectrophotometrically characterized and the film thicknesses were evaluated by atomic force microscopy (AFM). Finally, to check the performances and the efficiency of the realized solar cells, tests were carried out under standard conditions. Nowadays bulk heterojunction solar cells are still poorly efficient to be competitively commercialized. A challenge will be to find new materials and better deposition techniques in order to obtain better performances. The research has led to several breakthroughs in efficiency, with a power conversion efficiency approaching 5 %. The efficiency of the solar cells produced in this work is even lower (lower than 1 %). Despite all, solar cells of this type are interesting and may represent a cheaper and easier alternative to traditional silicon-based solar panels.

Studio delle proprieta ottiche di film di silicon oxynitrides (sion) per applicazioni fotovoltaiche

Nelle celle solari HIT (Heterojunction Intrinsic Thin layer) attualmente in circolazione il materiale maggiormente utilizzato è sicuramente il silicio, per la sua buona caratteristica di assorbimento e disponibilità in natura. Tuttavia, la struttura amorfa del silicio impiegato come emettitore, limita fortemente la conducibilità e aumenta gli effetti di degradazione legati all'esposizione alla luce. In quest'ottica, nel presente lavoro di tesi, vengono analizzati sottili layers di Silicon Oxynitride ossigenato, depositati in forma nanocristallina presso l'Università di Costanza su substrati in vetro, tramite PECVD (Plasma-Enhanced Chemical Vapor Deposition). Il materiale, che non presenta i difetti intrinseci della forma amorfa, è dal punto di vista delle proprietà fisiche fondamentali ancora poco conosciuto e rappresenta una possibile alternativa agli analoghi campioni in forma amorfa. Le misure e le analisi presentate in questa tesi, svolte presso il Dipartimento di Fisica e Astronomia di Bologna, sono finalizzate ad indagare le principali proprietà ottiche, quali l'energy gap e l'indice di rifrazione dei layers. I risultati ottenuti, espressi in funzione dei parametri di deposizione, mostrano che un aumento della concentrazione di ossigeno in fase di deposito implica un aumento lineare dell'ampiezza dell'energy gap e un calo dell'indice di rifrazione. Anche altri parametri come la potenza di deposito e il tempo di annealing sembrano giocare un ruolo importante sul valore dell'energy gap. I risultati appaiono inoltre essere in buon accordo con quanto ottenuto da studi precedenti su layers simili ma con una maggiore fase amorfa. In conclusione, la possibilità di regolare il valore dell'energy gap e l'indice di rifrazione in base ai parametri di deposizione, unita alle buone prerogative tipiche dei materiali cristallini, conferisce al materiale buone prospettive per applicazioni fotovoltaiche come emettitori in celle ad eterogiunzione o rivestimenti con proprietà antiriflettenti

Fabrication, Electrical Characterization and Simulation of Thin Film Solar Cells: CdTe and CIGS Materials

CdTe and Cu(In,Ga)Se2 (CIGS) thin film solar cells are fabricated, electrically characterized and modelled in this thesis. We start from the fabrication of CdTe thin film devices where the R.F. magnetron sputtering system is used to deposit the CdS/CdTe based solar cells. The chlorine post-growth treatment is modified in order to uniformly cover the cell surface and reduce the probability of pinholes and shunting pathways creation which, in turn, reduces the series resistance. The deionized water etching is proposed, for the first time, as the simplest solution to optimize the effect of shunt resistance, stability and metal-semiconductor inter-diffusion at the back contact. In continue, oxygen incorporation is proposed while CdTe layer deposition. This technique has been rarely examined through R.F sputtering deposition of such devices. The above experiments are characterized electrically and optically by current-voltage characterization, scanning electron microscopy, x-ray diffraction and optical spectroscopy. Furthermore, for the first time, the degradation rate of CdTe devices over time is numerically simulated through AMPS and SCAPS simulators. It is proposed that the instability of electrical parameters is coupled with the material properties and external stresses (bias, temperature and illumination). Then, CIGS materials are simulated and characterized by several techniques such as surface photovoltage spectroscopy is used (as a novel idea) to extract the band gap of graded band gap CIGS layers, surface or bulk defect states. The surface roughness is scanned by atomic force microscopy on nanometre scale to obtain the surface topography of the film. The modified equivalent circuits are proposed and the band gap graded profiles are simulated by AMPS simulator and several graded profiles are examined in order to optimize their thickness, grading strength and electrical parameters. Furthermore, the transport mechanisms and Auger generation phenomenon are modelled in CIGS devices.

Proprieta elettriche e ottiche di film di ge impiantati con sn.

In questo lavoro di tesi vengono studiate le proprietà ottiche ed elettriche di film sottili di germanio, impiantati con ioni stagno. I campioni, realizzati tramite tecnica CVD (\emph{Chemical Vapor Deposition}), sono stati realizzati in condizioni operative differenti, il che ha permesso di ottenere materiali con proprietà strutturali e fisiche diverse. Si è posta particolare attenzione alla presenza di strutture nanoporose, presenti in alcuni di questi campioni, che possono dar vita ad effetti di confinamento quantico, associato ad uno spostamento dell'energy gap rispetto al materiale bulk. Le analisi sono state effettuate sia tramite misure SPV (\emph{Surface Photovoltage}), che hanno permesso di indagare le proprietà ottiche, sia tramite tecnica IV (\emph{corrente-tensione}), volta ad evidenziare le proprietà elettriche dei diversi campioni. I risultati ottenuti sono, infine, stati confrontati con un campione di riferimento di film di germanio non impiantato, mettendone in luce le differenze strutturali e fisiche. Lo studio di questo materiale, oltre ad avere un'importanza di carattere fondamentale, è di interesse anche per le possibili ricadute applicative. Infatti, i materiali nanoporosi possono essere impiegati in vari campi, come ad esempio nell'elettronica, nello sviluppo di pannelli fotovoltaici e nella purificazione di gas e liquidi.

Film di silicon oxinitride (sion) per applicazioni fotovoltaiche, studio di transizioni ottiche.

I materiali per applicazioni fotovoltaiche hanno destato un interesse crescente nella comunità scienti�ca negli ultimi decenni. Le celle HIT (Het- erojunction Intrinsic Thin Layer ) sono dispositivi di ultima generazione che hanno raggiunto e�cienza elevata mantenendo bassi i costi di pro- duzione, e impiegano silicio amorfo (a-Si) come strato emettitore per il suo buon assorbimento della luce e silicio cristallino come regione attiva. La struttura amorfa del silicio presenta però una bassa conducibilità, oltre ad e�etti di degradazione che limitano considerevolmente la durevolezza di una cella. Per questo motivo si stanno cercando possibili alternative al silicio amorfo, in particolare strutture multifase e composti di silicio, ossigeno ed azoto. In questo lavoro sono esposti i risultati dell'analisi di sottili lay- er di Silicon Oxynitride ossigenato (SiOx Ny :H), in forma microcristallina, deposti tramite PECVD (P lasma-Enhanced Chemical Vapor Deposition) su vetro presso l'università di Costanza. La forma microcristallina è una distribuzione di agglomerati cristallini dell'ordine di grandezza di un mi- crometro in una matrice di silicio amorfo, e attualmente le sue proprietà ottiche ed elettroniche non sono ancora state studiate in maniera appro- fondita. Nonostante ciò, è invece evidente che la fase microstallina non presenta tanti difetti intrinseci come la forma amorfa e ne è quindi una val- ida alternativa. In questa ottica, si è svolto uno studio sperimentale delle proprietà ottiche di layers in forma microcristallina di SiOx Ny :H, quali la misura del gap energetico. I risultati sperimentali, volti a trovare la dipen- denza delle caratteristiche dai parametri di deposizione dei layers, hanno mostrato una riduzione del gap energetico con la concentrazione di N2 O, uno dei gas precursori utilizzati nella deposizione dei layers in camera di processo. In conclusione si può dire che il μc−SiOx Ny :H ha le buone carat- teristiche tipiche dei semiconduttori cristallini, che unite alla possibilità di regolare il valore del gap energetico in base alle scelte in fase di deposizione, gli conferisce buone prospettive per applicazioni in celle fotovoltaiche, come emettitore in celle ad eterogiunzione.

Proprietà ottiche di film sottili a base di silicio per applicazioni fotovoltaiche

Questa tesi ha come obiettivo quello di misurare la dipendenza spettrale di alcune proprietà ottiche, come trasmittanza e riflettanza, al fine di ricavare l’energy gap di film sottili costituiti da nanocrystalline silicon oxynitride (nc-SiOxNy) per applicazioni in celle solari HIT (Heterojunction Intrinsic Thin layer). Questi campioni sono stati depositati presso l’Università di Konstanz (Germania) tramite tecnica PECVD (Plasma-Enhanced Chemical Vapor Deposition). Questo materiale risulta ancora poco conosciuto per quanto riguarda le proprietà optoelettroniche e potrebbe presentare una valida alternativa a silicio amorfo (a-Si) e ossido di silicio idrogenato amorfo (a-SiOx:H) che sono attualmente utilizzati in questo campo. Le misure sono state effettuate presso i laboratori del Dipartimento di Fisica e Astronomia, settore di Fisica della Materia, dell’Università di Bologna. I risultati ottenuti mostrano che i campioni che non hanno subito alcun trattamento termico (annealing) presentano un energy gap che cresce linearmente rispetto alla diluizione di protossido di azoto in percentuale. Nei campioni analizzati sottoposto ad annealing a 800°C si è osservato un aumento dell’Eg dopo il trattamento. Un risultato ottimale consiste in un gap energetico maggiore di quello del silicio amorfo (a-Si) e del silicio amorfo idrogenato (a-Si:H), attualmente utilizzati in questa tipologia di celle, per evitare che questo layer assorba la luce solare che deve invece essere trasmessa al silicio sottostante. Per questo motivo i valori ottenuti risultano molto promettenti per future applicazioni fotovoltaiche.