Validation of daily growth increments and estimation of growth rates of larval and early juvenile black skipjack, Euthynnus lineatus, using otoliths

ENGLISH: Increments in otoliths (sagittae) were examined, using light and scanning electron microscopy, to determine ages and estimate growth rates of larval and early-juvenile black skipjack, Euthynnus lineatus. Larvae and juveniles were collected between 1987 and 1989 from coastal waters of Panama in the eastern Pacific Ocean. Results from a laboratory experiment indicated that immersion for 6 and 12 hours in a 200 mg/L solution of tetracycline hydrochloride adequately marks otoliths and that increments are formed daily in the sagittae of postflexion larvae and early juveniles. Further, survival rates of tetracycline-treated fish were not significantly different from those of control fish. Growth rates were derived from length-age relationships of 218 field-collected specimens ranging in size from 5.7 to 20.3 mm SL. A growth rate of 0.70 mm/d was estimated from the weighted regression of standard length on age for all specimens. This rate lies within the range reported for larvae and early juveniles of other species of subtropical and tropical scombrids. Growth rates of postflexion larvae and early juveniles were not significantly different between the rainy season in July-August 1988 and the dry, upwelling season in January-February 1989. Growth was, however, significantly more variable for older individuals in July-August than in January-February, and may correspond, in part, to seasonal patchiness of prey. The growth rates of the otoliths relative to fish length were also not significantly different between seasons; however, the otoliths were larger relative to the lengths of fish collected in the rainy season, which may reflect slower growth during earlier larval stages. SPANISH: Se examinaron incrementos en otolitos (ságitas), usando microscopia de luz y de barrido electrónico, a fin de determinar la edad y estimar las tasas de crecimiento de barriletes negros, Euthynnus lineatus, larvales y juveniles tempranos. Entre 1987 y 1989 se capturaron larvas y juveniles en las aguas costeras de Panamá en el Océano Pacífico oriental. Los resultados de un experimento de laboratorio indicaron que una inmersión de 6 a 12 horas de duración en una solución de 200 mg/L de hidrocloro de tetraciclina marca los otolitos adecuadamente y que los incrementos se forman a diario en las ságitas de larvas en postflexión y juveniles tempranos. Además, las tasas de supervivencia de los peces tratados con tetraciclina no fueron significativamente diferentes a aquellas de los peces de control. Se calcularon las tasas de crecimiento a partir de las relaciones de talla-edad de 218 especímenes de TE entre 5.7 y 20.3 mm capturados en el mar. Se estimó.una tasa de crecimiento de 0.70 mm/día a partir de la regresión ponderada de talla estándar sobre edad para todos los especímenes. Esta tasa cae dentro del rango reportado para larvas y juveniles tempranos de otras especies de escómbridos subtropicales y tropicales. Las tasas de crecimiento de larvas en postflexión y juveniles tempranos no fueron significativamente diferentes entre la temporada de lluvias en julio-agosto de 1988 y la temporada de sequía y afloramiento en enero-febrero de 1989. Sin emoargo, el crecimiento fue significativamente más variable para los individuos de mayor edad en julio-agosto que en enero-febrero, y quizás corresponda parcialmente a la irregularidad temporal de la abundancia de presas. Las tasas de crecimiento de los otolitos en relación a la talla de los peces tampoco fueron significativamente diferentes entre temporadas; sin embargo, los otolitos eran más grandes en relación a la talla en peces capturados en la temporada de lluvias, lo cual podría reflejar crecimiento más lento durante las etapas larvales más tempranas. (PDF contains 42 pages.)

Designing for validation of medical devices and equipment

Validation is important in the design, development and production of medical devices since effective and appropriate validation plays a vital role in defining the success of a product in both technical and economic terms. Regulations and quality standards lay out the requirements for product validation, but it is left to each individual manufacturer to establish and maintain their own validation procedures. More recently, there has also been a change of emphasis in the regulations and standards that encourage the integration of validation into the development process. However, this poses particular challenges to the manufacturer since there is a distinct lack of guidance to assist this integration. This workbook provides the first real guidance on good design practices for medical device development. It has been developed through extensive consultation with device manufacturers and analysis of regulatory requirements. The approach is intended to assist manufacturers in meeting the new regulations.

Long lifetime plasma channel in air generated by multiple femtosecond laser pulses and an external electrical field

The lifetime of a plasma channel produced by self-guiding intense femtosecond laser pulses in air is largely prolonged by adding a high voltage electrical field in the plasma and by introducing a series of femtosecond laser pulses. An optimal lifetime value is realized through adjusting the delay among these laser pulses. The lifetime of a plasma channel is greatly enhanced to 350 ns by using four sequential intense 100fs( FWHM) laser pulses with an external electrical field of about 350kV/m, which proves the feasibility of prolonging the lifetime of plasma by adding an external electrical field and employing multiple laser pulses. (c) 2006 Optical Society of America.

Long Run Trends in Energy-Related External Costs

30 p.

Observations on the influence of external factors on the duration of the embryonic development and on the molting rhythm of Cyclops vicinus. [Translation from: Oecologia 7, 342-355, 1971.]

Investigations on the control of the embryonic and post-embryonic development of arthropods have formed an intensively studied field of zoological research for a long time, Here in especially favourable cases the causal chain from the operation of external factors on the influence of physiological mechanisms, eg. of the hormone variety, is known right through to its primary influences. A comparative approach to the relevant questions was in the main only made in the case of the insects. For crustacea , investigations are available almost exclusively only for the malacostraca. This study examines the influence of the factors of temperature and photoperiod on the entire development of Cyclops vicinus. Tests were made on whether the light-darkness change serves as a regulator for a possible existing molting rhythm - a question which for the entire arthropods has been settled only very rarely. The basic material for the cultures that were examined originates from Lake Constance.

Quantum Mechanics Studies of Fuel Cell Catalysts and Proton Conducting Ceramics with Validation by Experiment

We carried out quantum mechanics (QM) studies aimed at improving the performance of hydrogen fuel cells. This led to predictions of improved materials, some of which were subsequently validated with experiments by our collaborators.

In part I, the challenge was to find a replacement for the Pt cathode that would lead to improved performance for the Oxygen Reduction Reaction (ORR) while remaining stable under operational conditions and decreasing cost. Our design strategy was to find an alloy with composition Pt3M that would lead to surface segregation such that the top layer would be pure Pt, with the second and subsequent layers richer in M. Under operating conditions we expect the surface to have significant O and/or OH chemisorbed on the surface, and hence we searched for M that would remain segregated under these conditions. Using QM we examined surface segregation for 28 Pt₃M alloys, where M is a transition metal. We found that only Pt₃Os and Pt₃Ir showed significant surface segregation when O and OH are chemisorbed on the catalyst surfaces. This result indicates that Pt₃Os and Pt3Ir favor formation of a Pt-skin surface layer structure that would resist the acidic electrolyte corrosion during fuel cell operation environments. We chose to focus on Os because the phase diagram for Pt-Ir indicated that Pt-Ir could not form a homogeneous alloy at lower temperature. To determine the performance for ORR, we used QM to examine all intermediates, reaction pathways, and reaction barriers involved in the processes for which protons from the anode reactions react with O₂ to form H₂O. These QM calculations used our Poisson-Boltzmann implicit solvation model include the effects of the solvent (water with dielectric constant 78 with pH 7 at 298K). We found that the rate determination step (RDS) was the O_ad hydration reaction (O_ad + H₂O_ad -> OH_ad + OH_ad) in both cases, but that the barrier for pure Pt of 0.50 eV is reduced to 0.48 eV for Pt₃Os, which at 80 degrees C would increase the rate by 218%. We collaborated with the Pu-Wei Wu’s group to carry out experiments, where we found that the dealloying process-treated Pt2Os catalyst showed two-fold higher activity at 25 degrees C than pure Pt and that the alloy had 272% improved stability, validating our theoretical predictions.

We also carried out similar QM studies followed by experimental validation for the Os/Pt core-shell catalyst fabricated by the underpotential deposition (UPD) method. The QM results indicated that the RDS for ORR is a compromise between the OOH formation step (0.37 eV for Pt, 0.23 eV for Pt_2ML/Os core-shell) and H₂O formation steps (0.32 eV for Pt, 0.22 eV for Pt_2ML/Os core-shell). We found that Pt_2ML/Os has the highest activity (compared to pure Pt and to the Pt₃Os alloy) because the 0.37 eV barrier decreases to 0.23 eV. To understand what aspects of the core shell structure lead to this improved performance, we considered the effect on ORR of compressing the alloy slab to the dimensions of pure Pt. However this had little effect, with the same RDS barrier 0.37 eV. This shows that the ligand effect (the electronic structure modification resulting from the Os substrate) plays a more important role than the strain effect, and is responsible for the improved activity of the core- shell catalyst. Experimental materials characterization proves the core-shell feature of our catalyst. The electrochemical experiment for Pt_2ML/Os/C showed 3.5 to 5 times better ORR activity at 0.9V (vs. NHE) in 0.1M HClO₄ solution at 25 degrees C as compared to those of commercially available Pt/C. The excellent correlation between experimental half potential and the OH binding energies and RDS barriers validate the feasibility of predicting catalyst activity using QM calculation and a simple Langmuir–Hinshelwood model.

In part II, we used QM calculations to study methane stream reforming on a Ni-alloy catalyst surfaces for solid oxide fuel cell (SOFC) application. SOFC has wide fuel adaptability but the coking and sulfur poisoning will reduce its stability. Experimental results suggested that the Ni4Fe alloy improves both its activity and stability compared to pure Ni. To understand the atomistic origin of this, we carried out QM calculations on surface segregation and found that the most stable configuration for Ni₄Fe has a Fe atom distribution of (0%, 50%, 25%, 25%, 0%) starting at the bottom layer. We calculated that the binding of C atoms on the Ni4Fe surface is 142.9 Kcal/mol, which is about 10 Kcal/mol weaker compared to the pure Ni surface. This weaker C binding energy is expected to make coke formation less favorable, explaining why Ni₄Fe has better coking resistance. This result confirms the experimental observation. The reaction energy barriers for CHx decomposition and C binding on various alloy surface, Ni₄X (X=Fe, Co, Mn, and Mo), showed Ni₄Fe, Ni₄Co, and Fe₄Mn all have better coking resistance than pure Ni, but that only Ni₄Fe and Fe₄Mn have (slightly) improved activity compared to pure Ni.

In part III, we used QM to examine the proton transport in doped perovskite-ceramics. Here we used a 2x2x2 supercell of perovskite with composition Ba₈X₇M₁(OH)₁O₂₃ where X=Ce or Zr and M=Y, Gd, or Dy. Thus in each case a 4⁺ X is replace by a 3⁺ M plus a proton on one O. Here we predicted the barriers for proton diffusion allowing both includes intra-octahedron and inter-octahedra proton transfer. Without any restriction, we only observed the inter-octahedra proton transfer with similar energy barrier as previous computational work but 0.2 eV higher than experimental result for Y doped zirconate. For one restriction in our calculations is that the O_donor-O_acceptor atoms were kept at fixed distances, we found that the barrier difference between cerates/zirconates with various dopants are only 0.02~0.03 eV. To fully address performance one would need to examine proton transfer at grain boundaries, which will require larger scale ReaxFF reactive dynamics for systems with millions of atoms. The QM calculations used here will be used to train the ReaxFF force field.

Optimization of nonvolatile holographic recording by application of an external electric field

The dependences of the recording properties of LiNbO3:Fe:Mn crystals on an external electric field (applied in the recording or fixing phase of the nonvolatile holographic recording process) are numerically investigated and the optimal conditions for applying an external electric field in this two-step process of nonvolatile holographic recording are discussed in detail. Significant improvement of the photorefractive performance has been found and experimental verifications using a small external electric field are described. Moreover, direct measures relating to the dominant photovoltaic mechanism in the doubly doped LiNbO3 crystals and the unconventional grating-enhanced fixing are revealed by applying an external electric field in the recording and the fixing phases, respectively.

Improvement in refractive-index change in LiNbO3 : Ce : Cu by applying an external electric field

By jointly solving two-centre material equations with a nonzero external electric field and coupled-wave equations, we have numerically studied the dependence of the non-volatile holographic recording in LiNbO3:Ce:Cu crystals on the external electric field. The dominative photovoltaic effect of the non-volatile holographic recording in doubly doped LiNbO3 crystals is directly verified. And an external electric field that is applied in the positive direction along the c-axis (or a large one in the negative direction of the c-axis) in the recording phase and another one that is applied in the negative direction of the c-axis in the fixing phase are both proved to benefit strong photorefractive performances. Experimental verifications are given with a small electric field applied externally.