854 resultados para experience design
Resumo:
Treatment for cancer often involves combination therapies used both in medical practice and clinical trials. Korn and Simon listed three reasons for the utility of combinations: 1) biochemical synergism, 2) differential susceptibility of tumor cells to different agents, and 3) higher achievable dose intensity by exploiting non-overlapping toxicities to the host. Even if the toxicity profile of each agent of a given combination is known, the toxicity profile of the agents used in combination must be established. Thus, caution is required when designing and evaluating trials with combination therapies. Traditional clinical design is based on the consideration of a single drug. However, a trial of drugs in combination requires a dose-selection procedure that is vastly different than that needed for a single-drug trial. When two drugs are combined in a phase I trial, an important trial objective is to determine the maximum tolerated dose (MTD). The MTD is defined as the dose level below the dose at which two of six patients experience drug-related dose-limiting toxicity (DLT). In phase I trials that combine two agents, more than one MTD generally exists, although all are rarely determined. For example, there may be an MTD that includes high doses of drug A with lower doses of drug B, another one for high doses of drug B with lower doses of drug A, and yet another for intermediate doses of both drugs administered together. With classic phase I trial designs, only one MTD is identified. Our new trial design allows identification of more than one MTD efficiently, within the context of a single protocol. The two drugs combined in our phase I trial are temsirolimus and bevacizumab. Bevacizumab is a monoclonal antibody targeting the vascular endothelial growth factor (VEGF) pathway which is fundamental for tumor growth and metastasis. One mechanism of tumor resistance to antiangiogenic therapy is upregulation of hypoxia inducible factor 1α (HIF-1α) which mediates responses to hypoxic conditions. Temsirolimus has resulted in reduced levels of HIF-1α making this an ideal combination therapy. Dr. Donald Berry developed a trial design schema for evaluating low, intermediate and high dose levels of two drugs given in combination as illustrated in a recently published paper in Biometrics entitled “A Parallel Phase I/II Clinical Trial Design for Combination Therapies.” His trial design utilized cytotoxic chemotherapy. We adapted this design schema by incorporating greater numbers of dose levels for each drug. Additional dose levels are being examined because it has been the experience of phase I trials that targeted agents, when given in combination, are often effective at dosing levels lower than the FDA-approved dose of said drugs. A total of thirteen dose levels including representative high, intermediate and low dose levels of temsirolimus with representative high, intermediate, and low dose levels of bevacizumab will be evaluated. We hypothesize that our new trial design will facilitate identification of more than one MTD, if they exist, efficiently and within the context of a single protocol. Doses gleaned from this approach could potentially allow for a more personalized approach in dose selection from among the MTDs obtained that can be based upon a patient’s specific co-morbid conditions or anticipated toxicities.
Resumo:
Purpose/objectives. A grounded theory design was used to identify, describe, and generate a theoretical analysis of the pain experience of elderly hospice patients with cancer. ^ Sample. Eleven participants over the age of 65, receiving services from a for-profit hospice were interviewed in their homes. ^ Methods. Broad unstructured face to face audio-taped interviews were transcribed verbatim and analyzed using constant-comparative method of analysis. ^ Findings. Pain was described as a hierarchy of chronic, acute, and psychological pain with psychological pain as the worst. Suffering was the basic social problem of pain. Participants dealt with suffering by the basic social process of enduring. Enduring had two sub-processes, maintaining hope and adjusting. Trusting in a higher being and finding meaning were mechanisms of maintaining hope. Mechanisms of adjusting were dealing with uncertainty, accepting, and minimizing pain. ^ Implications for nursing practice. Nurses need to recognize and value the hard work of enduring to deal with suffering. Assisting elderly hospice patients with cancer to address the sub-processes of enduring and their mechanisms can foster enduring. ^
Resumo:
1. Predation is a prime force of natural selection. Vulnerability to predation is typically highest early in life, hence effective antipredator defences should work already shortly after birth. Such early defences may be innate, transmitted through non-genetic parental effects or acquired by own early experience. 2. To understand potential joint effects of these sources of antipredator defences on pheno- typic expression, they should be manipulated within the same experiment. We investigated innate, parental and individual experience effects within a single experiment. Females of the African cichlid Simochromis pleurospilus were exposed to the offspring predator Ctenochromis horei or a benign species until spawning. Eggs and larvae were hand-reared, and larvae were then exposed to odour cues signalling the presence or absence of predators in a split-brood design. 3. Shortly after independence of maternal care, S. pleurospilus undergo a habitat shift from a deeper, adult habitat to a shallow juvenile habitat, a phase where young are thought to be par- ticularly exposed to predation risk. Thus, maternal effects induced by offspring predators pres- ent in the adult habitat should take effect mainly shortly after independence, whereas own experience and innate antipredator responses should shape behaviour and life history of S. pleurospilus during the later juvenile period. 4. We found that the manipulated environmental components independently affected different offspring traits. (i) Offspring of predator-exposed mothers grew faster during the first month of life and were thus larger at termination of maternal care, when the young migrate from the adult to the juvenile habitat. (ii) The offspring’s own experience shortly after hatching exerted lasting effects on predator avoidance behaviour. (iii) Finally, our results suggest that S. pleuro- spilus possess a genetically inherited ability to distinguish dangerous from benign species. 5. In S. pleurospilus, maternal effects were limited to a short but critical time window, when young undergo a niche shift. Instead, own environmental sampling of predation risk combined with an innate predisposition to correctly identify predators appears to prepare the young best for the environment, in which they grow up as juveniles.
Resumo:
OBJECTIVE To determine the prevalence of methicillin-resistant Staphylococcus aureus (MRSA) nasal colonization in hemodialysis patients and to analyze the cost-effectiveness of our screening approach compared with an alternative strategy. DESIGN Screening study and cost-effectiveness analysis. METHODS Analysis of twice-yearly MRSA prevalence studies conducted in the hemodialysis unit of a 950-bed tertiary care hospital from January 1, 2004, through December 31, 2013. For this purpose, nasal swab samples were cultured on MRSA screening agar (mannitol-oxacillin biplate). RESULTS There were 20 mass screenings during the 10-year study period. We identified 415 patients participating in at least 1 screening, with an average of 4.5 screenings per patient. Of 415 screened patients, 15 (3.6%) were found to be MRSA carriers. The first mass screening in 2004 yielded the highest percentage of MRSA (6/101 [6%]). Only 7 subsequent screenings revealed new MRSA carriers, whereas 4 screenings confirmed previously known carriers, and 8 remained negative. None of the carriers developed MRSA bacteremia during the study period. The total cost of our screening approach, that is, screening and isolation costs, was US $93,930. The total cost of an alternative strategy (ie, no mass screening administered) would be equivalent to costs of isolation of index cases and contact tracing was estimated to be US $5,382 (difference, US $88,548). CONCLUSIONS In an area of low MRSA endemicity (<5%), regular nasal screenings of a high-risk population yielded a low rate of MRSA carriers. Twice-yearly MRSA screening of dialysis patients is unlikely to be cost-effective if MRSA prevalence is low. Infect. Control Hosp. Epidemiol. 2015;00(0):1-4.
Resumo:
We tested the assumption that ego depletion would affect the sprint start in a sample of N = 38 athletes without track and field experience in an experiment by applying a mixed between- (depletion vs. non-depletion) within- (T1: before manipulation of ego depletion vs. T2: after manipulation of ego depletion) subjects design. We assumed that ego depletion would increase the possibility for a false start, as regulating the impulse to initiate the sprinting movement too soon before the starting signal requires self-control. In line with our assumption, we found a significant interaction as there was only a significant increase in the number of false starts from T1 to T2 for the depletion group while this was not the case for the non-depletion group. We conclude that ego depletion has a detrimental influence on the sprint start in athletes without track and field experience.
Resumo:
BACKGROUND In recent years, the scientific discussion has focused on new strategies to enable a torn anterior cruciate ligament (ACL) to heal into mechanically stable scar tissue. Dynamic intraligamentary stabilization (DIS) was first performed in a pilot study of 10 patients. The purpose of the current study was to evaluate whether DIS would lead to similarly sufficient stability and good clinical function in a larger case series. METHODS Acute ACL ruptures were treated by using an internal stabilizer, combined with anatomical repositioning of torn bundles and microfracturing to promote self-healing. Clinical assessment (Tegner, Lysholm, IKDC, and visual analogue scale [VAS] for patient satisfaction scores) and assessment of knee laxity was performed at 3, 6, 12, and 24 months. A one-sample design with a non-inferiority margin was chosen to compare the preoperative and postoperative IKDS and Lysholm scores. RESULTS 278 patients with a 6:4 male to female ratio were included. Average patient age was 31 years. Preoperative mean IKDC, Lysholm, and Tegner scores were 98.8, 99.3, and 5.1 points, respectively. The mean anteroposterior (AP) translation difference from the healthy contralateral knee was 4.7 mm preoperatively. After DIS treatment, the mean 12-month IKDC, Lysholm, and Tegner scores were 93.6, 96.2, and 4.9 points, respectively, and the mean AP translation difference was 2.3 mm. All these outcomes were significantly non-inferior to the preoperative or healthy contralateral values (p < 0.0001). Mean patient satisfaction was 8.8 (VAS 0-10). Eight ACL reruptures occurred and 3 patients reported insufficient subjective stability of the knee at the end of the study period. CONCLUSIONS Anatomical repositioning, along with DIS and microfracturing, leads to clinically stable healing of the torn ACL in the large majority of patients. Most patients exhibited almost normal knee function, reported excellent satisfaction, and were able to return to their previous levels of sporting activity. Moreover, this strategy resulted in stable healing of all sutured menisci, which could lower the rate of osteoarthritic changes in future. The present findings support the discussion of a new paradigm in ACL treatment based on preservation and self-healing of the torn ligament.
Resumo:
Objectives. The objectives of this report were to describe current best standards in online education, class competencies, class objectives, class activities and to compare the class competencies, objectives and activities undertaken with the current best practices in online teaching and to provide a list of recommendations based on the most efficacious practices. ^ Methods. Utilizing the key words- online teaching, national standards, quality, online courses, I: (1) conducted a search on Google to find the best standard for quality online courses; the search yielded National Standards for Quality Online Teaching as the gold standard in online course quality; (2) specified class objectives and competencies as well as major activities undertaken as a part of the class. Utilizing the Southern Regional Education Board evaluation checklist for online courses, I: (1) performed an analysis comparing the class activities, objectives, and competencies with the current best standards; (2) utilized the information obtained from the analysis and class experiences to develop recommendations for the most efficacious online teaching practices. ^ Results. The class met the criteria set by the Southern Regional Education Board for evaluating online classes completely in 75%, partially in 16% and did not meet the criteria in 9% cases. The majority of the parameters in which the class did not meet the standards (4 of 5) were due to technological reasons beyond the scope of the class instructor, teaching assistant and instructional design. ^ Discussion. Successful online teaching requires awareness of technology, good communication, methods, collaboration, reflection and flexibility. Creation of an online community, engaging online learners and utilizing different learning styles and assessment methods promote learning. My report proposes that online teaching should actively engage the students and teachers with multiple interactive strategies as evidenced from current best standards of online education and my “hands-on” work experience. ^ Conclusion. The report and the ideas presented are intended to create a foundation for efficacious practice on the online teaching platform. By following many of the efficacious online practices described in the report and adding from their own experiences, online instructors and teaching assistants can contribute to effective online learning. ^
Resumo:
Purpose. The focus of maternal role development, historically, has been on the tasks and processes during pregnancy as they relate to postpartum role transition. The purpose of this study was to investigate how women hospitalized with high-risk pregnancy cognitively construct pregnancy and impending motherhood. ^ Design. The study employed a triangulation design using a convergence model with a dominant focused ethnographic approach. ^ Setting. The antepartum units of two tertiary care centers in a large metropolitan city in southeast Texas. ^ Sample. Data saturation was determined with thirteen (13) primigravid women who had been hospitalized more than 72 hours with preterm labor (PTL) or preterm premature rupture of membranes (PPROM) who subsequently delivered seventeen (17) infants which included 4 sets of twins. ^ Methods. Open-ended, semi-structured interviews and field work were used to explore the development of maternal role in this population. After collecting descriptive data, long individual interviews were conducted and the Prenatal Self Evaluation Questionnaire (PSEQ), an instrument to measure prenatal adaptation to pregnancy, was administered. The interview focused on exploring the woman's experiences of pregnancy and impending motherhood while hospitalized. Interview data and field notes were coded and analyzed using qualitative thematic analytic techniques. The PSEQ was scored and the findings of the qualitative data and PSEQ data were compared. ^ Findings. Thematic analysis of the qualitative data provided an understanding of the cognitive process that occurs as the pregnant woman builds a relationship with the fetus. Thematic analysis resulted in a conceptual model with two complementary components that occur throughout the pregnancy: Establishing a Relationship and Dynamic Equilibrium. Establishing a Relationship includes subthemes of: Courting, Building a Connection, and Engagement. Dynamic equilibrium is the balance between expectations and reality and exists regardless of pregnancy complications. The negotiation of this potential imbalance is triggered by uncertainty, loss of autonomy and control, and isolation and is exacerbated by the high-risk pregnancy and subsequent hospitalization. These triggers can serve as obstacles to maternal role development, but may be mediated by external support from friends and family or health care providers. Support from others may come in the form of anticipatory guidance, presence, or activities that promote self-agency. PSEQ scores were similar to previous reports, but due to the small sample, scores were used primarily for comparison to qualitative data. The qualitative findings were congruent with the PSEQ findings in all of the subscales except in the concern for the well-being of the baby. Interview reports included comments demonstrating significant concern for the well-being of the infant, yet the related subscale did not demonstrate such concern. ^ Conclusions. An understanding of the cognitive process involved in establishing a relationship with the developing fetus related to impending motherhood and the importance of dynamic equilibrium can allow healthcare providers and those who interact with pregnant women to support development of the maternal role and anticipate those barriers that may impede that process. Findings from this study identify those triggers and mediators that influence development of the maternal role and suggest potential intervening strategies for those involved in the care of childbearing families. ^
Resumo:
In November 2010, nearly 110,000 people in the United States were waiting for organs for transplantation. Despite the fact that the organ donor registration rate has doubled in the last year, Texas has the lowest registration rate in the nation. Due to the need for improved registration rates in Texas, this practice-based culminating experience was to write an application for federal funding for the central Texas organ procurement organization, Texas Organ Sharing Alliance. The culminating experience has two levels of significance for public health – (1) to engage in an activity to promote organ donation registration, and (2) to provide professional experience in grant writing. ^ The process began with a literature review. The review was to identify successful intervention activities in motivating organ donation registration that could be used in intervention design for the grant application. Conclusions derived from the literature review included (1) the need to specifically encourage family discussions, (2) religious and community leaders can be leveraged to facilitate organ donation conversations in families, (3) communication content must be culturally sensitive and (4) ethnic disparities in transplantation must be acknowledged and discussed.^ Post the literature review; the experience followed a five step process of developing the grant application. The steps included securing permission to proceed, assembling a project team, creation of a project plan and timeline, writing each element of the grant application including the design of proposed intervention activities, and completion of the federal grant application. ^ After the grant application was written, an evaluation of the grant writing process was conducted. Opportunities for improvement were identified. The first opportunity was the need for better timeline management to allow for review of the application by an independent party, iterative development of the budget proposal, and development of collaborative partnerships. Another improvement opportunity was the management of conflict regarding the design of the intervention that stemmed from marketing versus evidence-based approaches. The most important improvement opportunity was the need to develop a more exhaustive evaluation plan.^ Eight supplementary files are attached to appendices: Feasibility Discussion in Appendix 1, Grant Guidance and Workshop Notes in Appendix 2, Presentation to Texas Organ Sharing Alliance in Appendix 3, Team Recruitment Presentation in Appendix 5, Grant Project Narrative in Appendix 7, Federal Application Form in Appendix 8, and Budget Workbook with Budget Narrative in Appendix 9.^
Resumo:
TSEP-RLI was a technical cooperation project jointly conducted by GOP thru DA-Agricultural Training Institute (ATI) and GOJ thru JICA aimed at institutionalizing the training program for Rural Life Improvement (RLI) at the (ATI). As expected, farmers, fisherfolk, women, youth and extension agents were provided with efficient and effective training services from ATI leading to the improvement of quality of life in the rural areas through efforts of human resource development. The ATI- Bohol was chosen as the model center where participatory trials and various activities of the project were undertaken for five years. These activities were participatory surveys and data collection of on-farm and off-farm productive activities; planning workshop for RLI; feedbacking of survey results and action plans to the community and the Local Government Units (LGUs), and signing of Memorandum of Agreement between the Project and participating LGUs. The above activities were done to facilitate the planning and development of most effective and necessary rural life improvement activities, to confirm the willingness of the people to support and participate and to formalize the partnership between the Project and the LGUs. Since the concept of rural life covers a vast range of activities, a consensus had been reached that the total aspects of rural life be grasped in three spheres, namely, Production & Livelihood (P/L), Rural Living Condition (RLC) and Community Environment (C/E). The RLI for Ubi (Yam) Growers was one of the pilot activities undertaken in two pilot barangays and the target beneficiaries were members of the Rural Improvement Club (RIC- a group of organized women) with the LGU of the Municipality of Corella as the implementing partner. During the planning workshop, the barangay residents articulated their desire to promote production and processing of ubi (sphere on P/L - as the entry point), lack of nutritious food was one of the identified problem (sphere on RLC- expansion point) and environmental degradation such as deforestation, and soil erosion was another problem articulated by the community people (sphere on C/E- expansion point). Major activities that were undertaken namely, Ubi cooking contest, cooking/processing seminar, training courses on entrepreneurial development, ubi production and storage technology, packaging and product design, human resource development and simplified bookkeeping motivated the beneficiaries as well as developed and enhanced their skills & capabilities while strengthening their associations. Their participation to the 5 ubi festivals and other related activities had brought some impacts on their economic and rural life improvement activities. The seven principles of TSEP-RLI include the participatory process, holistic approach, dialogical approach, bottom -up training needs assessment, demand-driven approach, cost sharing approach and collaborative implementation with other agencies including LGUs and the community.
Resumo:
This Doctoral Thesis entitled Contribution to the analysis, design and assessment of compact antenna test ranges at millimeter wavelengths aims to deepen the knowledge of a particular antenna measurement system: the compact range, operating in the frequency bands of millimeter wavelengths. The thesis has been developed at Radiation Group (GR), an antenna laboratory which belongs to the Signals, Systems and Radiocommunications department (SSR), from Technical University of Madrid (UPM). The Radiation Group owns an extensive experience on antenna measurements, running at present four facilities which operate in different configurations: Gregorian compact antenna test range, spherical near field, planar near field and semianechoic arch system. The research work performed in line with this thesis contributes the knowledge of the first measurement configuration at higher frequencies, beyond the microwaves region where Radiation Group features customer-level performance. To reach this high level purpose, a set of scientific tasks were sequentially carried out. Those are succinctly described in the subsequent paragraphs. A first step dealed with the State of Art review. The study of scientific literature dealed with the analysis of measurement practices in compact antenna test ranges in addition with the particularities of millimeter wavelength technologies. Joint study of both fields of knowledge converged, when this measurement facilities are of interest, in a series of technological challenges which become serious bottlenecks at different stages: analysis, design and assessment. Thirdly after the overview study, focus was set on Electromagnetic analysis algorithms. These formulations allow to approach certain electromagnetic features of interest, such as field distribution phase or stray signal analysis of particular structures when they interact with electromagnetic waves sources. Properly operated, a CATR facility features electromagnetic waves collimation optics which are large, in terms of wavelengths. Accordingly, the electromagnetic analysis tasks introduce an extense number of mathematic unknowns which grow with frequency, following different polynomic order laws depending on the used algorithmia. In particular, the optics configuration which was of our interest consisted on the reflection type serrated edge collimator. The analysis of these devices requires a flexible handling of almost arbitrary scattering geometries, becoming this flexibility the nucleus of the algorithmia’s ability to perform the subsequent design tasks. This thesis’ contribution to this field of knowledge consisted on reaching a formulation which was powerful at the same time when dealing with various analysis geometries and computationally speaking. Two algorithmia were developed. While based on the same principle of hybridization, they reached different order Physics performance at the cost of the computational efficiency. Inter-comparison of their CATR design capabilities was performed, reaching both qualitative as well as quantitative conclusions on their scope. In third place, interest was shifted from analysis - design tasks towards range assessment. Millimetre wavelengths imply strict mechanical tolerances and fine setup adjustment. In addition, the large number of unknowns issue already faced in the analysis stage appears as well in the on chamber field probing stage. Natural decrease of dynamic range available by semiconductor millimeter waves sources requires in addition larger integration times at each probing point. These peculiarities increase exponentially the difficulty of performing assessment processes in CATR facilities beyond microwaves. The bottleneck becomes so tight that it compromises the range characterization beyond a certain limit frequency which typically lies on the lowest segment of millimeter wavelength frequencies. However the value of range assessment moves, on the contrary, towards the highest segment. This thesis contributes this technological scenario developing quiet zone probing techniques which achieves substantial data reduction ratii. Collaterally, it increases the robustness of the results to noise, which is a virtual rise of the setup’s available dynamic range. In fourth place, the environmental sensitivity of millimeter wavelengths issue was approached. It is well known the drifts of electromagnetic experiments due to the dependance of the re sults with respect to the surrounding environment. This feature relegates many industrial practices of microwave frequencies to the experimental stage, at millimeter wavelengths. In particular, evolution of the atmosphere within acceptable conditioning bounds redounds in drift phenomena which completely mask the experimental results. The contribution of this thesis on this aspect consists on modeling electrically the indoor atmosphere existing in a CATR, as a function of environmental variables which affect the range’s performance. A simple model was developed, being able to handle high level phenomena, such as feed - probe phase drift as a function of low level magnitudes easy to be sampled: relative humidity and temperature. With this model, environmental compensation can be performed and chamber conditioning is automatically extended towards higher frequencies. Therefore, the purpose of this thesis is to go further into the knowledge of millimetre wavelengths involving compact antenna test ranges. This knowledge is dosified through the sequential stages of a CATR conception, form early low level electromagnetic analysis towards the assessment of an operative facility, stages for each one of which nowadays bottleneck phenomena exist and seriously compromise the antenna measurement practices at millimeter wavelengths.
Resumo:
Facilitating general access to data from sensor networks (including traffic, hydrology and other domains) increases their utility. In this paper we argue that the journalistic metaphor can be effectively used to automatically generate multimedia presentations that help non-expert users analyze and understand sensor data. The journalistic layout and style are familiar to most users. Furthermore, the journalistic approach of ordering information from most general to most specific helps users obtain a high-level understanding while providing them the freedom to choose the depth of analysis to which they want to go. We describe the general characteristics and architectural requirements for an interactive intelligent user interface for exploring sensor data that uses the journalistic metaphor. We also describe our experience in developing this interface in real-world domains (e.g., hydrology).
Resumo:
In overhead conductor rail lines, aluminium beams are usually mounted with support spacing between 8 and 12 meters, to limit the maximum vertical deflection in the center of the span. This small support spacing limits the use of overhead conductor rail to tunnels, therefore it has been used almost exclusively in metropolitan networks, with operation speeds below 110 km/h. Nevertheless, due to the lower cost of maintenance required for this electrification system, some railway administrations are beginning to install it in some tunnels on long-distance lines, requesting higher operation speeds [1]. Some examples are the Barcelona and Madrid suburban networks (Spain), and recent lines in Turkey and Malaysia. In order to adapt the design of the overhead conductor for higher speeds (V > 160 km/h), particular attention must be paid to the geometry of the conductor rail in critical zones as overlaps, crossings and, especially, transitions between conductor rail and conventional catenary, since the use of overhead conductor rail is limited to tunnels, as already mentioned. This paper describes simulation techniques developed in order to take into account these critical zones. Furthermore, some specific simulations results are presented that have been used to analyze and optimizes the geometry of this special zones to get a better current collection quality, in a real suburban network. This paper presents the work undertaken by the Railways Technology Research Centre (CITEF), having over 10 years of experience in railways research [1-4].
Resumo:
An experience developed by the authors in the design of educational tools, funded on multimedia support for using in teaching, will be presented. These tools have been used on the subject of Helicopters, http://ocw.upm.es/ingenieriaaeroespacial/ helicopteros at the Universidad Politécnica de Madrid (E.U.I.T. Aeronáutica). Throughout more than ten years, these didactical and educational elements have been defined and developed. It has the singularity that most of them have been designed for undergraduate students, as a part of their end of degree projectwork. This peculiarity has led to a wide range of proposals and solutions, as well as an appropriate approach. depending on the level of knowledge. The evolution of tools for developing these materials will be presented, discussing advantages and disadvantages. Finally, we will advance the new materials which are being prepared at present.
Resumo:
Systems integration is the origin of most major difficulties found in the engineering design of aeronautical vehicles. The whole design team must assure that each subsystem accomplishes its particular goals and that, together with the rest of the systems, they all meet the general aircraft requirements.Design and building of UAS is a field of actuation to which leading Universities, research Centers and Aeronautical designers have dedicated a lot of effort. In recent years, a team of students, lecturers and professors at the Escuela Universitaria de Ingeniería Técnica Aeronáutica (EUITA) have been working on the design and building of a UAS for civil observation. The design of multi-mission Unmanned Aerial Vehicles (UAVs) has seen a rapid progress in the last years. A wide variety of designs and applications, some of them really ingenious, have been proposed. The project, which has been going on as a teamwork experience for the last ten years, consists of the design and building of a UAV, and its peculiarity is that it has been carried out entirely by undergraduate students, as part of their Final Research Project. The students face a challenge that includes all the features and stages of an authentic engineering project. We present the current moment of evolution in the process, together with a description of the main difficulties the project has undergone, as a global experience in engineering design and development.