893 resultados para electronic paper display
Resumo:
The use of diamond as a semiconductor for the realization of transistor structures, which can operate at high temperatures (>700 K), is of increasing interest. In terms of bipolar devices, the growth of n-type phosphorus doped diamond is more efficient on the (111) growth plane; p-type boron-doped diamond growth has been most usually grown in the (100) direction and, hence, this study into the electronic properties, at high temperatures, of boron-doped diamond (111) homoepitaxial layers. It is shown that highly doped layers (hole carrier concentrations as high as 2×1020 cm-3) can be produced without promoting the onset of (unwanted) hopping conduction. The persistence of valance-band conduction in these films enables relatively high mobility values to be measured ( ~ 20 cm2/V?s) and, intriguingly, these values are not significantly reduced at high temperatures. The layers also display very low compensation levels, a fact that may explain the high mobility values since compensation is required for hopping conduction. The results are discussed in terms of the potential of these types of layers for use with high temperature compatible diamond transistors.
Resumo:
Despite the proliferation of e-commerce adoption by SMEs and the world-wide growth of e-commerce, in general there is a paucity of empirical studies that examine the adoption of e-commerce by SMEs in the Middle East. In this paper, the authors provide insights into the salient e-commerce adoption issues by focusing on Saudi Arabian SMEs. This research was designed using a qualitative approach through in-depth case studies selected from firms in Saudi Arabia. The findings contribute toward a better conceptual and practical understanding of the main factors driving SMEs to adopt e-commerce. The authors find that the level of e-commerce implementation has yet to mature and customer readiness for Internet shopping must improve before e-commerce reaches the levels of maturity seen in other regions of the world. This study highlights directions for future inquiry and implications for information and technology managers and policymakers in developing Arab nations.
Resumo:
I was recently part of a small committee looking at higher qualifications in contact lens practice and the discussion turned to future technologies. There was mention of different materials and different applications of contact lenses. Drug delivery with contact lenses was discussed as this has been talked about in the literature for a while. The first paper I could find that talked about using contact lenses for drug delivery dates back over 40 years. There was a review paper in CLAE in 2008 that looked specifically at this too [1]. However, where are these products? Why are we not seeing them in the market place? Maybe the technology is not quite there yet, or maybe patents are prohibiting usage or maybe the market is not big enough to develop such products? We do have lenses on the market with slow release of lubricating agents but not therapeutic agents used for ocular or systemic conditions. Contact lenses with pathogen detectors may be part of our contact lens armoury of the future and again we can already see papers in the literature that have trialled this technology for glucose monitoring in diabetics or lactate concentration in the tear film. Future contact lenses may incorporate better optics based on aberration control and we see this starting to emerge with aspheric designs designed to minimise spherical aberration. Irregular corneas can be fitted with topography based designs and again this technology exists and is being used by some manufacturers in their designs already. Moreover, the topography based fitting of irregular corneas is certainly something we see a lot of today and CLAE has seen many articles related to this over the last decade or so. What about further into the future? Well one interesting area must the 3-dimensional contact lenses, or contact lenses with electronic devices built in that simulate a display screen. A little like the virtual display spectacles that are already sold by electronics companies. It does not take much of a stretch of the imagination to see a large electronic company taking this technology on and making it viable. Will we see people on the train watching movies on these electronic virtual reality contact lenses? I think we will, but when is harder to know.
Resumo:
A proposal to increase the existing residential LV grid voltage from 230 V to 300 V has been made in order to increase existing network capacity. A power-electronic AC-AC converter is then used to provide 230 V at each property. The equipment can also provide power-quality improvements to the network and load. Several constraints such as temperature rise at the converter location lead to a converter design requiring very high efficiency. In this paper different AC/AC converter topologies are presented which compares the power quality benefits, size and efficiency of each converter. The design and the control technique of the most suitable topology are verified using simulation and preliminary experimentally results of prototype hardware are also included. © 2013 IEEE.
Resumo:
The Electronic Patient Record (EPR) is being developed by many hospitals in the UK and across the globe. We class an EPR system as a type of Knowledge Management System (KMS), in that it is a technological tool developed to support the process of knowledge management (KM). Healthcare organisations aim to use these systems to provide a vehicle for more informed and improved clinical decision making thereby delivering reduced errors and risks, enhanced quality and consequently offering enhanced patient safety. Finding an effective way for a healthcare organisation to practically implement these systems is essential. In this study we use the concept of the business process approach to KM as a theoretical lens to analyse and explore how a large NHS teaching hospital developed, executed and practically implemented an EPR system. This theory advocates the importance of taking into account all organizational activities - the business processes - in considering any KM initiatives. Approaching KM through business processes allows for a more holistic view of the requirements across a process: emphasis is placed on how particular activities are performed, how they are structured and what knowledge demanded and not just supplied across each process. This falls in line with the increased emphasis in healthcare on patient-centred approaches to care delivery. We have found in previous research that hospitals are happy with the delivery of patient care being referred to as their 'business'. A qualitative study was conducted over a two and half year period with data collected from semi-structured interviews with eight members of the strategic management team, 12 clinical users and 20 patients in addition to non- participant observation of meetings and documentary data. We believe that the inclusion of patients within the study may well be the first time this has been done in examining the implementation of a KMS. The theoretical propositions strategy was used as the overarching approach for data analysis. Here Initial theoretical research themes and propositions were used to help shape and organise the case study analysis. This paper will present preliminary findings about the hospital's business strategy and its links to the KMS strategy and process.
Resumo:
Magnification can be provided to assist those with visual impairment to make the best use of remaining vision. Electronic transverse magnification of an object was first conceived for use in low vision in the late 1950s, but has developed slowly and is not extensively prescribed because of its relatively high cost and lack of portability. Electronic devices providing transverse magnification have been termed closed-circuit televisions (CCTVs) because of the direct cable link between the camera imaging system and monitor viewing system, but this description generally refers to surveillance devices and does not indicate the provision of features such as magnification and contrast enhancement. Therefore, the term Electronic Vision Enhancement Systems (EVES) is proposed to better distinguish and describe such devices. This paper reviews current knowledge on EVES for the visually impaired in terms of: classification; hardware and software (development of technology, magnification and field-of-view, contrast and image enhancement); user aspects (users and usage, reading speed and duration, and training); and potential future development of EVES. © 2003 The College of Optometrists.
Resumo:
PURPOSE: To examine whether objective performance of near tasks is improved with various electronic vision enhancement systems (EVES) compared with the subject's own optical magnifier. DESIGN: Experimental study, randomized, within-patient design. METHODS: This was a prospective study, conducted in a hospital ophthalmology low-vision clinic. The patient population comprised 70 sequential visually impaired subjects. The magnifying devices examined were: patient's optimum optical magnifier; magnification and field-of-view matched mouse EVES with monitor or head-mounted display (HMD) viewing; and stand EVES with monitor viewing. The tasks performed were: reading speed and acuity; time taken to track from one column of print to the next; follow a route map, and locate a specific feature; and identification of specific information from a medicine label. RESULTS: Mouse EVES with HMD viewing caused lower reading speeds than stand EVES with monitor viewing (F = 38.7, P < .001). Reading with the optical magnifier was slower than with the mouse or stand EVES with monitor viewing at smaller print sizes (P < .05). The column location task was faster with the optical magnifier than with any of the EVES (F = 10.3, P < .001). The map tracking and medicine label identification task was slower with the mouse EVES with HMD viewing than with the other magnifiers (P < .01). Previous EVES experience had no effect on task performance (P > .05), but subjects with previous optical magnifier experience were significantly slower at performing the medicine label identification task with all of the EVES (P < .05). CONCLUSIONS: Although EVES provide objective benefits to the visually impaired in reading speed and acuity, together with some specific near tasks, some can be performed just as fast using optical magnification. © 2003 by Elsevier Inc. All rights reserved.
Resumo:
This paper is part of a project which aims to research the opportunities for the re-use of batteries after their primary use in low and ultra low carbon vehicles on the electricity grid system. One potential revenue stream is to provide primary/secondary/high frequency response to National Grid through market mechanisms via DNO's or Energy service providers. Some commercial battery energy storage systems (BESS) already exist on the grid system, but these tend to use costly new or high performance batteries. Second life batteries should be available at lower cost than new batteries but reliability becomes an important issue as individual batteries may suffer from degraded performance or failure. Therefore converter topology design could be used to influence the overall system reliability. A detailed reliability calculation of different single phase battery-to-grid converter interfacing schemes is presented. A suitable converter topology for robust and reliable BESS is recommended.
Resumo:
The paper presents an ongoing effort aimed at building an electronic archive of documents issued by the Bulgarian Ministry of Education in the 40ies and 50ies of the 20th century. These funds are stored in the Archive of the Ministry of the People’s Education within the State Archival Fund of the General Department of Archives at the Council of Ministers of Bulgaria. Our basic concern is not the digitization process per se, but the subsequent organization of the archive in a clear and easily-searchable way which would allow various types of users to get access to the documents of interest to them. Here we present the variety of the documents which are stored in the archival collection, and suggestions on their electronic organization. We suggest using ontologies- based presentation of the archive. The basic benefit of this approach is the possibility to search the collection according to the stored content categories.
Resumo:
The paper informs about the history of manuscript digitization in the National Library of the Czech Republic as well as about other issues concerning processing of manuscripts. The main consequence of the massive digitization and record and/or full text processing is a paradigm shift leading to the digital history.
Resumo:
This paper deals with the classification of news items in ePaper, a prototype system of a future personalized newspaper service on a mobile reading device. The ePaper system aggregates news items from various news providers and delivers to each subscribed user (reader) a personalized electronic newspaper, utilizing content-based and collaborative filtering methods. The ePaper can also provide users "standard" (i.e., not personalized) editions of selected newspapers, as well as browsing capabilities in the repository of news items. This paper concentrates on the automatic classification of incoming news using hierarchical news ontology. Based on this classification on one hand, and on the users' profiles on the other hand, the personalization engine of the system is able to provide a personalized paper to each user onto her mobile reading device.
Resumo:
The purpose of this paper is to investigate the technological development of electronic inventory solutions from perspective of patent analysis. We first applied the international patent classification to classify the top categories of data processing technologies and their corresponding top patenting countries. Then we identified the core technologies by the calculation of patent citation strength and standard deviation criterion for each patent. To eliminate those core innovations having no reference relationships with the other core patents, relevance strengths between core technologies were evaluated also. Our findings provide market intelligence not only for the research and development community, but for the decision making of advanced inventory solutions.
Resumo:
This paper looks at potential distribution network stability problems under the Smart Grid scenario. This is to consider distributed energy resources (DERs) e.g. renewable power generations and intelligent loads with power-electronic controlled converters. The background of this topic is introduced and potential problems are defined from conventional power system stability and power electronic system stability theories. Challenges are identified with possible solutions from steady-state limits, small-signal, and large-signal stability indexes and criteria. Parallel computation techniques might be included for simulation or simplification approaches are required for a largescale distribution network analysis.
Resumo:
This paper discusses the variety of the digitized content of an electronic encyclopedia on the veneration of saints according to Bulgarian sources. The emphasis is on medieval Slavonic Church manuscripts and on present-day records of Bulgarian folklore narratives and songs. The combination of these sources provokes discussion of the so-called folklore Christianity and adds new dimensions to the understanding of the role of the cults of saints for culture and of the religiosity of the Bulgarians.
Resumo:
Local Government Authorities (LGAs) are mainly characterised as information-intensive organisations. To satisfy their information requirements, effective information sharing within and among LGAs is necessary. Nevertheless, the dilemma of Inter-Organisational Information Sharing (IOIS) has been regarded as an inevitable issue for the public sector. Despite a decade of active research and practice, the field lacks a comprehensive framework to examine the factors influencing Electronic Information Sharing (EIS) among LGAs. The research presented in this paper contributes towards resolving this problem by developing a conceptual framework of factors influencing EIS in Government-to-Government (G2G) collaboration. By presenting this model, we attempt to clarify that EIS in LGAs is affected by a combination of environmental, organisational, business process, and technological factors and that it should not be scrutinised merely from a technical perspective. To validate the conceptual rationale, multiple case study based research strategy was selected. From an analysis of the empirical data from two case organisations, this paper exemplifies the importance (i.e. prioritisation) of these factors in influencing EIS by utilising the Analytical Hierarchy Process (AHP) technique. The intent herein is to offer LGA decision-makers with a systematic decision-making process in realising the importance (i.e. from most important to least important) of EIS influential factors. This systematic process will also assist LGA decision-makers in better interpreting EIS and its underlying problems. The research reported herein should be of interest to both academics and practitioners who are involved in IOIS, in general, and collaborative e-Government, in particular. © 2013 Elsevier Ltd. All rights reserved.