Role of IFN-gamma in immune responses to Candida albicans infections

Candida albicans is the most frequent etiologic agent that causes opportunistic fungal infections called candidiasis, a disease whose systemic manifestation could prove fatal and whose incidence is increasing as a result of an expanding immunocompromised population. Here we review the role of interferon-gamma (IFN-��) in host protection against invasive candidiasis. This cytokine plays an essential role in both the innate and adaptive arms of the immune response to candidiasis. We focus on recent progress on host-pathogen interactions leading to the production of IFN-�� by host cells. IFN-�� is produced by CD4 Th1, CD8, ���� T, and natural killer (NK) cells, essentially in response to both IL-12 and/or IL-18; more recently, a subset of C. albicans-specific Th17 cells have been described to produce both IL-17 and IFN-��. IFN-�� plays an important role in the regulation of the immune system as well as in the control of the infectious process, as it is required for optimal activation of phagocytes, collaborates in the generation of protective antibody response, and favors the development of a Th1 protective response.

Electrochemical behaviour of activated carbons obtained via hydrothermal carbonization

Activated carbons were prepared by chemical activation of hydrochars, obtained by hydrothermal carbonisation (HTC) using low cost and abundant precursors such as rye straw and cellulose, with KOH. Hydrochars derived from rye straw were chemically activated using different KOH/precursor ratios, in order to assess the effect of this parameter on their electrochemical behaviour. In the case of cellulose, the influence of the hydrothermal carbonisation temperature was studied by fixing the activating agent/cellulose ratio. Furthermore, N-doped activated carbons were synthesised by KOH activation of hydrochars prepared by HTC from a mixture of glucose with melamine or glucosamine. In this way, N-doped activated carbons were prepared in order to evaluate the influence of nitrogen groups on their electrochemical behaviour in acidic medium. The results showed that parameters such as chemical activation or carbonisation temperature clearly affect the capacitance, since these parameters play a key role in the textural properties of activated carbons. Finally, symmetric capacitors based on activated carbon and N-doped activated carbon were tested at 1.3 V in a two-electrode cell configuration and the results revealed that N-groups improved the capacitance at high current density.

O tr��ptico da paix��o de Cristo do Pal��cio Nacional da Ajuda: hist��ria, estudo material, iconografia e filia����o est��listica

O objeto de estudo desta disserta����o �� um pequeno tr��ptico do Pal��cio Nacional da Ajuda, provavelmente dos finais do s��c. XV, sobre o qual existe pouca informa����o. A obra pertence ao acervo de pintura antiga deste pal��cio/museu (inv. 3540) e encontra-se exposta no ���Atelier de Pintura de D. Lu��s���. Trata-se de uma pintura sobre t��bua de carvalho, em mau estado de conserva����o, representando cinco epis��dios relativos �� Paix��o de Cristo: a Flagela����o, a Coroa����o de Espinhos, o Caminho do Calv��rio e duas cenas relativas �� Ressurrei����o. Apresenta uma iconografia singular, mas as suas caracter��sticas gerais indicam tratar-se de uma pintura tardo-g��tica do Norte da Europa, nomeadamente da Alemanha. O objetivo desta tese de mestrado em Hist��ria da Arte, Patrim��nio e Teoria do Restauro, consiste na investiga����o hist��rica e material desta obra, sobre a qual existe pouca informa����o. Por ser desconhecida a sua cronologia, autoria e local de produ����o, al��m de n��o haver qualquer documenta����o ou bibliografia sobre a mesma, iremos estudar esta obra a partir da sua materialidade, iconografia e estilo, na medida em que a obra �� um ���documento vivo���. Tendo sido agora encontrada a ��nica e a mais antiga refer��ncia documental relativa a esta obra, nos arrolamentos de 1913 do pal��cio (Invent��rio Judicial), este tr��ptico consta na "Galeria de Quadros���, indicando ter pertencido �� cole����o de pintura de D. Lu��s I. Interessa, ent��o, focar a pol��tica de aquisi����es de pintura antiga n��rdica desenvolvida pelo monarca, tentando perceber porque �� que o tr��ptico n��o consta nos cat��logos das exposi����es (duas edi����es dos cat��logos, 1869 e 1872) da ���Galeria de Pintura no Real Pa��o da Ajuda���, aberta ao p��blico em1869. Porque a interdisciplinaridade entre arte e ci��ncia �� fundamental para um conhecimento mais profundo da Hist��ria da Arte, esta obra foi objeto de um estudo material que consistiu no levantamento in situ da pintura (exames de ��rea e de ponto), na an��lise laboratorial (estratigrafia, pigmentos e aglutinantes) e na integra����o dos resultados, para compreender a t��cnica pict��rica, que se articula com a an��lise iconogr��fica e de filia����o estil��stica, contribuindo para a integra����o da obra no seu contexto hist��rico-cultural de origem, como pintura devocional germ��nica.

Greater TTIP Ambition in Chemicals: Why and how. CEPS Special Report, 28 July 2015. Paper No. 10 in the CEPS-CTR project ���TTIP in the Balance��� and CEPS Special Report No. 114/July 2015.

To date, the negotiations over chemicals in the Translatlantic Trade and Investment Partnership (TTIP) have not shown sufficient ambition. The talks have focused too much on the differences in the two ���systems���, rather than on the actual levels of health and environmental protection for substances regulated by both the US and the EU. Given the accomplishments within the OECD and the UN Globally Harmonised System of Classification and Labelling of Chemicals (GHS), the question is whether TTIP can be any more ambitious in the area of chemicals? We find that there is no detailed or systematic knowledge about how the two levels of protection in chemicals compare, although caricatures and stereotypes abound. This is partly due to an obsessive focus on a single US federal law, the Toxic Subtances Control Act (TSCA), whereas in practice US protection depends on many statutes and regulations, as well as on voluntary withdrawals (under pressure from the Environmental Protection Agency) and severe common law liability. This paper makes the economic case for firmly addressing the regulatory barriers, discusses the EU���s proposals, finds that the European Parliament���s Resolution on TTIP of July 2015 lacks a rationale (for chemicals), argues that both TSCA and REACH ought to be improved (based on ���better regulation���), discusses the link with a global regime, advocates significant improvement of market access where equivalence of health and environmental objectives is agreed and, finally, proposes to lower the costs for companies selling in both markets by allowing them to opt into the other party���s more stringent rules, thereby avoiding duplication while racing-to-the-top. The ���living agreement��� on chemicals ought to be led by a new TTIP institution authorised to establish the level of health and environmental protection on both sides of the Atlantic for substances regulated on both sides. These findings will lay the foundation for a highly beneficial lowering of trading costs without in any way affecting the level of protection. Indeed, this is exactly what TTIP is, or should be, all about.This paper is the 10th in a series produced in the context of the ���TTIP in the Balance��� project, jointly organised by CEPS and the Center for Transatlantic Relations (CTR) in Washington, D.C. It is published simultaneously on the CEPS (www.ceps.eu) and CTR websites (http://transatlantic.sais-jhu.edu).

The Problem Sensitization Robotic Complex Drilling and Milling of Sandwich Shells of Polymer Composites

In clause is given robotic a complex for drilling and milling sandwich shells from polymeric composites. The machining of polymeric composite materials has technological problems. At drilling sandwich shells there is a probability of destruction of a drill from hit of the tool in a partition. The system sensibilization robotic complex for increase of reliability of work of the cutting tool of the small size is offered.

Algorithm for Estimation of Electricity Consumption Reduction by Using Variable Frequency Drive of Main Line Pumps

The article is about using of variable frequency drives for reduction oil pumping main line pumps energy consumption. Block diagram of developed computer program is shown in the article. The computer program allows to determine the reduction of energy consumption and to estimate payback period of variable frequency drives.

Connection Establishment Algorithm for Multidestination Protocol

Connection establishment is a fundamental function for any connection-oriented network protocol and the efficiency of this function defines the flexibility and responsiveness of the protocol. This process initializes data transmission and performs transmission parameters negotiation, what makes it mandatory process and integral part of entire transmission. Thus, the duration of the connection establishment will affect the transmission process duration. This paper describes an implementation of a handshake algorithm, designed for connection with multiple peers, that is used in Reliable Multi-Destination Transport(RMDT) protocol, its optimization and testing.

Relox universal de pendola, y en el Nueva idea de la estructura del universo : se declara la colocacion del globo terraque, y su movimiento de oscilacion en el centro del universo, y el movimiento del Sol al rededor del globo en circulo perfecto, sin declinacion /

Mode of access: Internet.

Enarrationes in collectanea primi libri Magistri Sententiarum /

Mode of access: Internet.

The role of morphine-6-glucuronide (M6G) in pain control

Morphine-6beta-D-glucuronide (M6G) is an analgesically active metabolite of morphine, accounting for approximate to10% of the morphine dose when administered by systemic routes to humans. Although M6G is more hydrophilic than morphine, it crosses the blood-brain barrier, albeit relatively slowly. For this reason, it is generally thought that, after chronic dosing, M6G contributes significantly to the analgesic effects of systemically administered morphine. Owing to its polar nature, M6G is cleared from the systemic circulation primarily via renal elimination. As M6G accumulates in patients with renal impairment, there is an increased risk of M6G-induced respiratory depression in renal failure patients who are being dosed chronically with systemic morphine. Consistent with its analgesic and respiratory depressant properties, M6G binds to the p-opioid receptor in a naloxone-reversible manner. Although the affinity of M6G for the mu-opioid receptor is similar to or slightly less than that of morphine, preclinical studies in rodents show that M6G is one to two orders of magnitude more potent than morphine when administered by central routes. This major discrepancy between the markedly higher intrinsic antinociceptive potency of M6G relative to morphine, despite their similar p-opioid receptor binding affinities, is difficult to reconcile. It has been proposed that M6G mediates its pain-relieving effects through a novel 'M6G opioid receptor', while others have argued that M6G may have higher efficacy than morphine for transduction of intracellular events. When administered by parenteral routes to rodents, M6G's antinociceptive potency is no more than twofold higher than morphine. In humans, the analgesic efficacy and respiratory depressant potency of M6G relative to morphine have been assessed in a number of short-term studies involving the intrathecal or intravenous routes of administration. For example, in hip replacement patients, intrathecal M6G provided excellent postoperative analgesia but the occurrence of late respiratory depression in 10% of these patients raised serious concern about safety. In postoperative patients, intravenous M6G administered by means of patient-controlled analgesia (PCA), or bolus plus PCA, produced no analgesia in one study and limited analgesia in another. Similarly, there was a lack of significant analgesia in healthy volunteers who received intravenous M6G for the alleviation of experimental pain (carbon dioxide applied to the nasal mucosa). In contrast, satisfactory analgesia was produced by bolus doses of intravenous M6G administered to patients with cancer pain, and to healthy volunteers with experimentally-induced ischaemic, electrical or thermal (ice water) pain. Studies to date in healthy volunteers suggest that intravenous M6G may be a less potent respiratory depressant and have a lower propensity for producing nausea and vomiting than morphine. However, it is unclear whether equi-analgesic doses of M6G and morphine were compared. Clearly, more extensive short-term trials, together with studies involving chronic M6G administration, are necessary before the potential clinical utility of M6G as an analgesic drug in its own right can be determined.

The impact of market forces on the sustainability of the biotechnology industry

his paper contains a warning for investors, executives, analysts and scientists about the sustainability of the biotechnology industry. The study upon which the paper is based examines the impact of market forces on the biotechnology industry and argues that the short-term focus of market driven policies and practices impacts on the sustainability of firms operating in the industry. The market is represented by the National Association of Securities Dealers, Automated Quotations Market (NASDAQ), considered to be one of the vehicles of the promotion of ''new economy'' companies and principles. Through the application of bibliometric data (using both refereed and non-refereed papers), matched with the long term tracking of the NASDAQ Biotechnology Index, the authors provide a clear indication that the short-term investment thinking is leading an industry that is characterised by long R&D cycles. There is an incompatibility between the shorter-term investment considerations and the long-term scientific developments the biotechnology industry is attempting to achieve. Graphs and illustrations are provided to portray the comparative data.

An FDTD model for calculation of gradient-induced eddy currents in MRI system

In most magnetic resonance imaging (MRI) systems, pulsed magnetic gradient fields induce eddy currents in the conducting structures of the superconducting magnet. The eddy currents induced in structures within the cryostat are particularly problematic as they are characterized by long time constants by virtue of the low resistivity of the conductors. This paper presents a three-dimensional (3-D) finite-difference time-domain (FDTD) scheme in cylindrical coordinates for eddy-current calculation in conductors. This model is intended to be part of a complete FDTD model of an MRI system including all RF and low-frequency field generating units and electrical models of the patient. The singularity apparent in the governing equations is removed by using a series expansion method and the conductor-air boundary condition is handled using a variant of the surface impedance concept. The numerical difficulty due to the asymmetry of Maxwell equations for low-frequency eddy-current problems is circumvented by taking advantage of the known penetration behavior of the eddy-current fields. A perfectly matched layer absorbing boundary condition in 3-D cylindrical coordinates is also incorporated. The numerical method has been verified against analytical solutions for simple cases. Finally, the algorithm is illustrated by modeling a pulsed field gradient coil system within an MRI magnet system. The results demonstrate that the proposed FDTD scheme can be used to calculate large-scale eddy-current problems in materials with high conductivity at low frequencies.

Evolutionary dynamics of wAu-Like Wolbachia variants in neotropical Drosophila spp.

Wolbachia bacteria are common intracellular symbionts of arthropods and have been extensively studied in Drosophila. Most research focuses on two Old Word hosts, Drosophila melanogaster and Drosophila simulans, and does not take into account that some of the Wolbachia associations in these species may have evolved only after their fast global expansion and after the exposure to Wolbachia of previously isolated habitats. Here we looked at Wolbachia of Neotropical Drosophila species. Seventy-one lines of 16 Neotropical Drosophild species sampled in different regions and at different time points were analyzed. Wolbachia is absent in lines of Drosophild willistoni collected before the 1970s, but more recent samples are infected with a strain designated wWiL Wolbachia is absent in all other species of the willistoni group. Polymorphic wWil-related strains were detected in some saltans group species, with D. septentriosaltans being coinfected with at least four variants. Based on wsp and ftsZ sequence data, wWil of D. willistoni is identical to wAu, a strain isolated from D. simulans, but can be discriminated when using a polymorphic minisatellite marker. In contrast to wAu, which infects both germ line and somatic tissues of D. simulans, wWil is found exclusively in the primordial germ line cells of D. willistoni embryos. We report on a pool of closely related Wolbachia strains in Neotropical Drosophila species as a potential source for the wAu strain in D. simulans. Possible evolutionary scenarios reconstructing the infection history of wAu-like Wolbachia in Neotropical Drosophild species and the Old World species D. simulans are discussed.

Antibacterial dosing in intensive care: Pharmacokinetics, degree of disease and pharmacodynamics of sepsis

Treatment of sepsis remains a significant challenge with persisting high mortality and morbidity. Early and appropriate antibacterial therapy remains an important intervention for such patients. To optimise antibacterial therapy, the clinician must possess knowledge of the pharmacokinetic and pharmacodynamic properties of commonly used antibacterials and how these parameters may be affected by the constellation of pathophysiological changes occurring during sepsis. Sepsis, and the treatment thereof, increases renal preload and, via capillary permeability, leads to 'third-spacing', both resulting in higher antibacterial clearances. Alternatively, sepsis can induce multiple organ dysfunction, including renal and/or hepatic dysfunction, causing a decrease in antibacterial clearance. Aminoglycosides are concentration-dependent antibacterials and they display an increased volume of distribution (V-d) in sepsis, resulting in decreased peak serum concentrations. Reduced clearance from renal dysfunction would increase the likelihood of toxicity. Individualised dosing using extended interval dosing, which maximises the peak serum drug concentration (C-max)/minimum inhibitory concentration ratio is recommended. beta-Lactams and carbapenems are time-dependent antibacterials. An increase in Vd and renal clearance will require increased dosing or administration by continuous infusion. If renal impairment occurs a corresponding dose reduction may be required. Vancomycin displays predominantly time-dependent pharmacodynamic properties and probably requires higher than conventionally recommended doses because of an increased V-d and clearance during sepsis without organ dysfunction. However, optimal dosing regimens remain unresolved. The poor penetration of vancomycin into solid organs may require alternative therapies when sepsis involves solid organs (e.g. lung). Ciprofloxacin displays largely concentration-dependent kill characteristics, but also exerts some time-dependent effects. The V-d of ciprofloxacin is not altered with fluid shifts or over time, and thus no alterations of standard doses are required unless renal dysfunction occurs. In order to optimise antibacterial regimens in patients with sepsis, the pathophysiological effects of systemic inflammatory response syndrome need consideration, in conjunction with knowledge of the different kill characteristics of the various antibacterial classes. In conclusion, certain antibacterials can have a very high V-d, therefore leading to a low C-max and if a high peak is needed, then this would lead to underdosing. The Vd of certain antibacterials, namely aminoglycosides and vancomycin, changes over time, which means dosing may need to be altered over time. Some patients with serum creatinine values within the normal range can have very high drug clearances, thereby producing low serum drug levels and again leading to underdosing. Copyright �� 2010 Elsevier Inc. All rights reserved.

An investigation of the mechanics of wire drawing with the superposition of an oscillatory drawing stress

A number of investigators have studied the application of oscillatory energy to a metal undergoing plastic deformation. Their results have shown that oscillatory stresses reduce both the stress required to initiate plastic deformation and the friction forces between the tool and workpiece. The first two sections in this thesis discuss historically and technically the devolopment of the use of oscillatory energy techniques to aid metal forming with particular reference to wire drawing. The remainder of the thesis discusses the research undertaken to study the effect of applying longitudinal oscillations to wire drawing. Oscillations were supplied from an electric hydraulic vibrator at frequencies in the range 25 to 500 c/s., and drawing tests were performed at drawing speeds up to 50 ft/m. on a 2000 lbf. bull-block. Equipment was designed to measure the drawing force, drawing torque, amplitude of die and drum oscillation and drawing speed. Reasons are given for selecting mild steel, pure and hard aluminium, stainless steel and hard copper as the materials to be drawn, and the experimental procedure and calibration of measuring equipment arc described. Results show that when oscillatory stresses are applied at frequencies within the range investigated : (a) There is no reduction in the maximum drawing load. (b) Using sodium stearate lubricant there is a negligible reduction in the coefficient of friction between the die and wire. (c) Pure aluminium does not absorb sufficient oscillatory energy to ease the movement of dislocations. (d) Hard aluminium is not softened by oscillatory energy accelerating the diffusion process. (e) Hard copper is not cyclically softened. A vibration analysis of the bull-block and wire showed that oscillatory drawiing in this frequency range, is a mechanical process of straining; and unstraining the drawn wire, and is dependent upon the stiffness of the material being drawn and the drawing machine. Directions which further work should take are suggested.