Platinum–rhodium–tin/carbon electrocatalysts for ethanol oxidation in acid media: effect of the precursor addition order and the amount of tin

Carbon-supported Pt x –Rh y –Sn z catalysts (x:y:z = 3:1:4, 6:2:4, 9:3:4) are prepared by Pt, Rh, and Sn precursors reduction in different addition order. The materials are characterized by X-ray diffraction, transmission electron microscopy, and X-ray photoelectron spectroscopy techniques and are evaluated for the electrooxidation of ethanol in acidic media by cyclic voltammetry, chronoamperometry, and anode potentiostatic polarization. The influence of both the order in which the precursors are added and the composition of metals in the catalysts on the electrocatalytic activity and physico-chemical characteristics of Pt x –Rh y –Sn z /C catalysts is evaluated. Oxidized Rh species prevail on the surface of catalysts synthesized by simultaneous co-precipitation, thus demonstrating the influence of synthesis method on the oxidation state of catalysts. Furthermore, high amounts of Sn in composites synthesized by co-precipitation result in very active catalysts at low potentials (bifunctional effect), while medium Sn load is needed for sequentially deposited catalysts when the electronic effect is most important (high potentials), since more exposed Pt and Rh sites are needed on the catalyst surface to alcohol oxidation. The Pt3–Rh1–Sn4/C catalyst prepared by co-precipitation is the most active at potentials lower than 0.55 V (related to bifunctional effect), while the Pt6–Rh2–Sn4/C catalyst, prepared by sequential precipitation (first Rh and, after drying, Pt + Sn), is the most active above 0.55 V.

ELECTROCATALYTIC PROCESSING OF RENEWABLE BIOMASS-DERIVED COMPOUNDS FOR PRODUCTION OF CHEMICALS, FUELS AND ELECTRICITY

The dual problems of sustaining the fast growth of human society and preserving the environment for future generations urge us to shift our focus from exploiting fossil oils to researching and developing more affordable, reliable and clean energy sources. Human beings had a long history that depended on meeting our energy demands with plant biomass, and the modern biorefinery technologies realize the effective conversion of biomass to production of transportation fuels, bulk and fine chemicals so to alleviate our reliance on fossil fuel resources of declining supply. With the aim of replacing as much non-renewable carbon from fossil oils with renewable carbon from biomass as possible, innovative R&D activities must strive to enhance the current biorefinery process and secure our energy future. Much of my Ph.D. research effort is centered on the study of electrocatalytic conversion of biomass-derived compounds to produce value-added chemicals, biofuels and electrical energy on model electrocatalysts in AEM/PEM-based continuous flow electrolysis cell and fuel cell reactors. High electricity generation performance was obtained when glycerol or crude glycerol was employed as fuels in AEMFCs. The study on selective electrocatalytic oxidation of glycerol shows an electrode potential-regulated product distribution where tartronate and mesoxalate can be selectively produced with electrode potential switch. This finding then led to the development of AEMFCs with selective production of valuable tartronate or mesoxalate with high selectivity and yield and cogeneration of electricity. Reaction mechanisms of electrocatalytic oxidation of ethylene glycol and 1,2-propanediol were further elucidated by means of an on-line sample collection technique and DFT modeling. Besides electro-oxidation of biorenewable alcohols to chemicals and electricity, electrocatalytic reduction of keto acids (e.g. levulinic acid) was also studied for upgrading biomass-based feedstock to biofuels while achieving renewable electricity storage. Meanwhile, ORR that is often coupled in AEMFCs on the cathode was investigated on non-PGM electrocatalyst with comparable activity to commercial Pt/C. The electro-biorefinery process could be coupled with traditional biorefinery operation and will play a significant role in our energy and chemical landscape.

Ab Initio Quantum Chemical Studies on Neutral-Radical Reactions of Ethynyl (C2H) and Cyano (CN) with Unsaturated Hydrocarbons

An Ab Initio/RRKM study of the reaction mechanism and product branching ratios of neutral-radical ethynyl (C2H) and cyano (CN) radical species with unsaturated hydrocarbons is performed. The reactions studied apply to cold conditions such as planetary atmospheres including Titan, the Interstellar Medium (ISM), icy bodies and molecular clouds. The reactions of C2H and CN additions to gaseous unsaturated hydrocarbons are an active area of study. NASA’s Cassini/Huygens mission found a high concentration of C2H and CN from photolysis of ethyne (C2H2) and hydrogen cyanide (HCN), respectively, in the organic haze layers of the atmosphere of Titan. The reactions involved in the atmospheric chemistry of Titan lead to a vast array of larger, more complex intermediates and products and may also serve as a chemical model of Earth’s primordial atmospheric conditions. The C2H and CN additions are rapid and exothermic, and often occur barrierlessly to various carbon sites of unsaturated hydrocarbons. The reaction mechanism is proposed on the basis of the resulting potential energy surface (PES) that includes all the possible intermediates and transition states that can occur, and all the products that lie on the surface. The B3LYP/6-311g(d,p) level of theory is employed to determine optimized electronic structures, moments of inertia, vibrational frequencies, and zero-point energy. They are followed by single point higher-level CCSD(T)/cc-vtz calculations, including extrapolations to complete basis sets (CBS) of the reactants and products. A microcanonical RRKM study predicts single-collision (zero-pressure limit) rate constants of all reaction paths on the potential energy surface, which is then used to compute the branching ratios of the products that result. These theoretical calculations are conducted either jointly or in parallel to experimental work to elucidate the chemical composition of Titan’s atmosphere, the ISM, and cold celestial bodies.

Mechanisms of Chloroperoxidase-catalyzed Enantioselective Reactions as Probed by Site-directed Mutagenesis and Isotopic Labeling

Chloroperoxidase (CPO) is a heme-containing glycoprotein secreted by the marine fungus Caldariomyces fumago. Chloroperoxidase contains one ferriprotoporphyrin IX prosthetic group per molecule and catalyzes a variety of reactions, such as halogenation, peroxidation and epoxidation. The versatile catalytic activities of CPO coupled with the increasing demands for chiral synthesis have attracted an escalating interest in understanding the mechanistic and structural properties of this enzyme. In order to better understand the mechanisms of CPO-catalyzed enantioselective reactions and to fine-tune the catalytic properties of chloroperoxidase, asparagine 74 (N74) located in the narrow substrate access channel of CPO was replaced by a bulky, nonpolar valine and a polar glutamine using site-directed mutagenesis. The CPO N74 mutants displayed significantly enhanced activity toward nonpolar substrates compared to wild-type CPO as a result of changes in space and polarity of the heme distal environment. More interestingly, N74 mutants showed dramatically decreased chlorination and catalase activity but significantly enhanced epoxidation activity as a consequence of improved kinetic perfection introduced by the mutation as reflected by the favorable changes in kcat and kcat/KM of these reactions. It is also noted that the N74V mutant is capable of decomposing cyanide, the most notorious poison for many hemoproteins, as judged by the unique binding behavior of N74V with potassium cyanide. Histidine 105 (H105) was replaced by a nonpolar amino acid alanine using site-directed mutagenesis. The CPO H105 mutant (H105A) displayed dramatically decreased chlorination and catalase activity possibly because of the decreased polarity in the heme distal environment and loss of the hydrogen bonds between histidine 105 and glutamic acid 183. However, significantly increased enantioselectivity was observed for the epoxidation of bulky styrene derivatives. Furthermore, my study provides strong evidence for the proposed histidine/cysteine ligand switch in chloroperoxidase, providing experimental support for the structure of the 420-nm absorption maximum for a number of carbon monoxide complexes of heme-thiolate proteins. For the NMR study, [dCPO(heme)] was produced using 90% deuterated growth medium with excess heme precursors and [dCPO(Phe)] was grown in the same highly deuterated medium that had been supplemented with excess natural phenylalanine. To make complete heme proton assignments, NMR spectroscopy has been performed for high-resolution structural characterization of [dCPO(heme)] and [dCPO(Phe)] to achieve unambiguous and complete heme proton assignments, which also allows important amino acids close to the heme active center to be determined.

Engineering design of an integrated sustainable process system for cassava biobased materials

Cassava contributes significantly to biobased material development. Conventional approaches for its bio-derivative-production and application cause significant wastes, tailored material development challenges, with negative environmental impact and application limitations. Transforming cassava into sustainable value-added resources requires redesigning new approaches. Harnessing unexplored material source, and downstream process innovations can mitigate challenges. The ultimate goal proposed an integrated sustainable process system for cassava biomaterial development and potential application. An improved simultaneous release recovery cyanogenesis (SRRC) methodology, incorporating intact bitter cassava, was developed and standardized. Films were formulated, characterised, their mass transport behaviour, simulating real-distribution-chain conditions quantified, and optimised for desirable properties. Integrated process design system, for sustainable waste-elimination and biomaterial development, was developed. Films and bioderivatives for desired MAP, fast-delivery nutraceutical excipients and antifungal active coating applications were demonstrated. SRRC-processed intact bitter cassava produced significantly higher yield safe bio-derivatives than peeled, guaranteeing 16% waste-elimination. Process standardization transformed entire root into higher yield and clarified colour bio-derivatives and efficient material balance at optimal global desirability. Solvent mass through temperature-humidity-stressed films induced structural changes, and influenced water vapour and oxygen permeability. Sevenunit integrated-process design led to cost-effectiveness, energy-efficient and green cassava processing and biomaterials with zero-environment footprints. Desirable optimised bio-derivatives and films demonstrated application in desirable in-package O2/CO2, mouldgrowth inhibition, faster tablet excipient nutraceutical dissolutions and releases, and thymolencapsulated smooth antifungal coatings. Novel material resources, non-root peeling, zero-waste-elimination, and desirable standardised methodology present promising process integration tools for sustainable cassava biobased system development. Emerging design outcomes have potential applications to mitigate cyanide challenges and provide bio-derivative development pathways. Process system leads to zero-waste, with potential to reshape current style one-way processes into circular designs modelled on nature's effective approaches. Indigenous cassava components as natural material reinforcements, and SRRC processing approach has initiated a process with potential wider deployment in broad product research development. This research contributes to scientific knowledge in material science and engineering process design.

Desenvolvimento de métodos electroquímicos de quantificação de fármacos em amostras de água contaminadas

Este trabalho teve como objectivo, o desenvolvimento de um método electroquímico, para quantificação do fármaco carbamazepina (CBZ) em águas contaminadas. Neste trabalho foram utilizados quatro métodos voltamétricos: a voltametria cíclica, a voltametria de varrimento linear, a voltametria de onda quadrada e a voltametria de impulso diferencial. Os eléctrodos de trabalho utilizados foram, o eléctrodo de mercúrio de gota suspensa, o eléctrodo de carbono vítreo clássico e um eléctrodo de carbono vítreo modificado com um filme de nanotubos de carbono de paredes múltiplas (MWCNTs). O eléctrodo de mercúrio de gota suspensa permitiu o estudo da redução da CBZ numa região de potencial mais catódico, e os eléctrodos de carbono vítreo, com e sem modificação, permitiram o estudo da oxidação da CBZ numa região de potencial mais anódico. Nas condições experimentais estudadas, o eléctrodo de mercúrio de gota suspensa revelou ser um sensor voltamétrico pouco eficaz na determinação quantitativa da carbamazepina, em amostras com uma matriz complexa. Entre os eléctrodos de carbono vítreo, o eléctrodo de carbono vítreo modificado com os MWCNTs revelou ser o sensor voltamétrico mais eficaz e sensível, na detecção e determinação da carbamazepina. Modificado com um filme de nanotubos de carbono de paredes múltiplas, que previamente foram dispersos em dihexadecilhidrogenofosfato (DHP) e água, este novo eléctrodo permitiu obter uma resposta electroquímica da CBZ, consideravelmente superior ao eléctrodo não modificado. Utilizando a voltametria de varrimento linear e as condições experimentais consideradas óptimas, o eléctrodo nanoestruturado permitiu obter uma relação linear entre o sinal medido e a concentração da CBZ no intervalo 0.13- 1.60 M (30.7- 378 g -1), com os limites de detecção e quantificação mais baixos, até à data reportados com métodos electroquímicos (0.04 e 0.14M, respectivamente). O eléctrodo modificado foi aplicado na quantificação da CBZ, em formulações farmacêuticas, em águas naturais tratadas e em amostras de águas residuais, ambas dopadas, obtendo-se taxas de recuperação consideravelmente elevadas (100.6%, 98.0%,95.8%, respectivamente). Os resultados obtidos, na análise da CBZ em amostras ambientais, com o eléctrodo modificado, foram comparados com resultados obtidos por HPLC-UV e LC­ ESI-MS/MS, validando o método electroquímico desenvolvido neste trabalho. ABSTRACT: The aim of this work was to develop a new electrochemical method for the quantification of carbamazepine (CBZ) in contaminated waters. ln this study, four voltammetric methods were used: cyclic voltammetry, linear sweep voltammetry, square wave voltammetry and differential pulse voltammetry. the working electrodes used were the hanging mercury drop electrode (HMDE), the classical glassy carbon electrode (GCE), and a glassy carbon electrode modified with a film of multi-walled carbon nanotubes (MWCNls). Using HMDE, the reduction of CBZ was studied in the cathodic potential region. the CGE sensors, with or without modification, allowed the study of CBZ oxidation in the anodic potential region. ln the tested conditions, the results obtained for the quantification of CBZ using the HMDE sensor were not very satisfactory, especially when more complex samples were analysed. When the MWCNls-dihexadecyl hydrogen phosphate (DHP) film­ coated GCE was used for the voltammetric determination of CBZ, the results obtained showed that this modified electrode exhibits excellent enhancement effects on the electrochemical oxidation of CBZ. the oxidation peak current of CBZ at this film­ modified electrode increased significantly, when compared with that at a bare glassy carbon electrode. The enhanced electrooxidation and voltammetry of CBZ at the surface of MWCNTs-DHP film coated GCE in phosphate buffer solution (pH 6.71) was attributed to the unique properties of MWCNTs such as large specific surface area and strong adsorptive properties providing more reaction sites. The proposed method was applied to the quantification of CBZ in pharmaceutical formulations, drinking water and wastewater samples with good recoveries and low limits of detection and quantification (0.04 and 0.14 M, respectively), and was positively compared with chromatographic techniques usually used in the quantification of pharmaceutical compounds in environmental samples. HPLC-UV and LC-ESI-MS/MS were also used in the quantification of CBZ in pharmaceutical formulations and wastewater samples to prove the importance and accuracy of his voltammetric method.

Caracteres morfo-agronômicos e bioquímicos de clones elite de mandioca de mesa com raízes de polpas amarelada e rosada.

A mandioca (Manihot esculenta Crantz) é considerada uma espécie relevante como fonte alimentícia para a população mundial, principalmente para os países subdesenvolvidos e emergentes. A mandioca é fornecedora de energia a partir do amido acumulado em suas raízes de reserva, mas é também importante destacar a presença dos carotenóides com atividade antioxidante. Nesse contexto, o presente trabalho teve como objetivo caracterizar, por meio de descritores morfológicos, agronômicos e bioquímicos, clones elite de mandioca de mesa de polpa aparelhada e rosada do programa de melhoramento genético de mandioca da Embrapa Cerrados. Foram caracterizados durante duas safras, 13 clones de mandioca de mesa com polpa amarelada e 8 clones com polpa rosada, em comparação com a variedade testemunha IAC 576-70 (BGMC 753). Para avaliar as características morfológicas foram obtidos 40 descritores qualitativos para cada clone. Tanto nos clones de polpas amarelada quanto naqueles de raízes de polpas rosada, houve diferenças morfológicas, demostrando que nenhum clone apresentou 100% de similaridade. O fator ano/safra não influenciou a expressão fenotípica dos caracteres aferidos. Com base no coeficiente cofenético, verificou-se elevado ajuste entre a representação gráfica via dendrograma de r = 0,80 nas raízes de polpa amarelada e r = 0,92 na rosada e a matriz de dissimilaridade genética. Entre os caracteres aferidos, os que apresentaram maior entropia nas raízes amarelada foram, a coloração da epiderme externa, forma do lóbulo central da folha e cor do córtex da raiz, ao passo que na rosada foi à cor do disco, forma do lóbulo central e cor do pecíolo. Foi realizada também a caracterização com base na altura da planta, altura da primeira ramificação, peso da parte aérea sem a cepa, produtividade em raízes, índices de amido nas raízes determinados por meio do método da balança hidrostática, tempo para a cocção e teor de ácido cianídrico nas raízes. Com base nos caracteres avaliados, os clones que se destacaram com polpa amarelada e rosada respectivamente, no caractere altura da primeira ramificação (273/08 e 259/08) e (390/08, 345/08 e a testemunha IAC 576-70), altura da planta (90/08, 272/08, 273/08, 497/08, 259/08 e 450/08) e (390/08, 345/08 e 378/08), peso da parte aérea sem a cepa (94/08 e 272/08) e (390/08, 406/08, 390/08, 378/08 e 341/08), porcentagem de amido nas raízes (26/08, 272/08, 259/08 e 450/08) e (378/08, 413/08, 390/08 e a testemunha IAC 576-70), produtividade de raízes (215/08) e (testemunha IAC 576-70, 341/08, 406/08, 390/08 e 387/08). Com relação ao tempo de cocção na safra 2011/2012, todos os clones necessitaram de tempo inferior a 30 minutos. Em relação ao teor de carotenóides totais nas raízes os clones de amarelada que se destacaram foram 91/08, 94/08, 215/08, 246/08, 272/08 e 497/08, e, naqueles de raízes rosada, os clones 406/08 e 341/08. Em relação ao teor de proteínas nas raízes amarelada, os clones 26/08, 90/08 e 91/08, foram os melhores enquanto nas raízes rosada se destacaram os clones 406/08 e a testemunha IAC 576-70. Os teores de HCN nas raízes de reserva de mandioca foram inferiores a 100 mg kg-1 em todos os clones avaliados. Diferenças significativas entre clones de mandioca de polpas amarelada e rosada foram verificadas para todas as características agronômicas, morfológicas e bioquímicas avaliadas. Os clones tiveram bom desempenho nas avaliações para o cultivo comercial na região do Cerrado e, alguns destes, têm potencial para utilização no melhoramento visando o incremento de carotenóides. ABSTRACT: Cassava (Manihot esculenta Crantz) is considered a relevant species as a food source for the world's population, particularly for developing and emerging countries. The cassava is a provider of energy from starch accumulated in their reserve roots, but it is also important to highlight the presence of carotenoids with antioxidant activity. In this context, this study aimed to characterize, using morphological, agronomic and biochemical, descriptors elite clones from sweet cassava of yellowish and pinkish pulps from the cassava breeding program at Embrapa Cerrados. They were characterized for two crops, 13 edible cassava clones with yellowish pulp and 8 clones with pinkish pulp, compared with the control variety IAC 576-70 (BGMC 753). To evaluate the morphological characteristics were obtained 40 qualitative descriptors for each clone. Both clones the yellowish pulp as those the roots the pinkish pulp, there was morphological differences among clones, showing that no clone showed 100% similarity. The year / crop factor did not influence the phenotypic expression of measured characters. Based on cofenetic coefficient, was found high fit between the graphical representation via dendrogram of r = 0.80 in the roots of yellowish pulp and r = 0.92 in the pinkish of genetic dissimilarity matrix. Among the measured characters, those with the highest entropy in the yellowish roots were, the color of the outer epidermis, the central lobe shape of the leaf and root cortex color, whereas the pinkish was the color to disc, central lobe shape and petiole color. We also performed the characterization based on plant height, the first branch point, and shoot weight without strain, productivity in roots, and index of starch in the roots determines by the method of hydrostatic balance, time for cooking and acid cyanide content in the roots. Based on the evaluated characters, clones stood out with pulps yellowish and pinkish respectively, characters height of the first branch (273/08 and 259/08) and (390/08, 345/08 and the witness IAC 576-70), plant height (90 / 08, 272/08, 273/08, 497/08, 259/08 and 450/08) and (390/08, 345/08 and 378/08), shoot weight without strain (94/08 and 272/08) and (390/08, 406/08, 390/08, 378/08 and 341/08), percentage of starch in the roots (26/08, 272/08, 259/08 and 450/08) and (378/08, 413/08, 390/08 and the witness IAC 576-70), roots of productivity (215/08) and (witnesses IAC 576-70, 341/08, 406/08, 390/08 and 387/08). Regarding the cooking time in the 2011/2012 harvest, all clones showed time less than 30 minutes. Regarding the total carotenoid content in the pulps clones of yellowish roots that stood out were 91/08, 94/08, 215/08, 246/08, 272/08 and 497/08, and, those the clones with pulp pinkish 406/08 and 341/08. Regarding the protein content in yellowish roots the clones 26/08, 90/08 and 91/08, was the best while the pinkish roots highlight clones 406/08 and witness IAC 576-70. The levels of HCN in reserve roots of cassava were less than 100 mg kg-1em all evaluated clones. Significant differences between yellowish and pinkish of pulps cassava clones were checked for all agronomic, morphological and biochemical characteristics evaluated. The clones had well in the ratings for commercial cultivation in the Cerrado region and some of these, clones has potential for use in breeding aimed at increase of carotenoids.