Finite element analysis of pectus carinatum surgical correction via a minimally invasive approach

Pectus carinatum (PC) is a chest deformity caused by a disproportionate growth of the costal cartilages compared to the bony thoracic skeleton, pulling the sternum towards, which leads to its protrusion. There has been a growing interest on using the ‘reversed Nuss’ technique as minimally invasive procedure for PC surgical correction. A corrective bar is introduced between the skin and the thoracic cage and positioned on top of the sternum highest protrusion area for continuous pressure. Then, it is fixed to the ribs and kept implanted for about 2–3 years. The purpose of this work was to (a) assess the stresses distribution on the thoracic cage that arise from the procedure, and (b) investigate the impact of different positioning of the corrective bar along the sternum. The higher stresses were generated on the 4th, 5th and 6th ribs backend, supporting the hypothesis of pectus deformities correction-induced scoliosis. The different bar positioning originated different stresses on the ribs’ backend. The bar position that led to lower stresses generated on the ribs backend was the one that also led to the smallest sternum displacement. However, this may be preferred, as the risk of induced scoliosis is lowered.

Success factors of regional airports: the case of Oporto airport

Oporto Airport (OPO) is a success story among European regional airports. This success is expressed, among other ways, in the rapid expansion of routes and the strong growth in demand, as well as in the recognition of the airport’s quality by its users. Over the past decade, the volume of traffic increased by almost 3.4 million passengers, from the 2.6 million recorded in 2002 to over 6 million in 2012. In this paper, we analyse some of the factors that influenced the success of Oporto Airport, namely the expansion of capacity and improvements to infrastructure, the increase in the number of routes and the increased demand in response to the new capacities of this airport-airlines set. Particular emphasis is given to the role of low cost carriers (LCC) in the growth of Oporto Airport and to strategies of attracting more traffic. Some of the main opportunities and challenges that this airport will face in the coming years are also discussed.

Determinant factors of the implementation of the balanced scorecard in Portugal: empirical evidence in public and private organizations

In this article we aim to identify and analyze a set of variables that can potentially influence the adoption of the Balanced Scorecard (BSC)in Portugal. Hypotheses were tested using data obtained from a questionnaire sent to 591 publicly-owned organizations (local governments, municipal corporations and hospitals) and 549 privately-owned organizations (large companies and small and medium enterprises) in Portugal, with an overall response rate of 31.3%. The results allow us to conclude that although the majority of respondents claimed to know the BSC, its use in Portugal is still limited and very recent, particularly in the public sector organizations. However, it should be noted that its use has increased in Portugal in recent years. Using as theoretical framework the contingency and institutional theories, we found that decentralization, vertical differentiation and the degree of higher education are associated with the implementation of the BSC.

Automatic prebent customized prosthesis for pectus excavatum minimally invasive surgery correction

Pectus excavatum is the most common deformity of the thorax. A minimally invasive surgical correction is commonly carried out to remodel the anterior chest wall by using an intrathoracic convex prosthesis in the substernal position. The process of prosthesis modeling and bending still remains an area of improvement. The authors developed a new system, i3DExcavatum, which can automatically model and bend the bar preoperatively based on a thoracic CT scan. This article presents a comparison between automatic and manual bending. The i3DExcavatum was used to personalize prostheses for 41 patients who underwent pectus excavatum surgical correction between 2007 and 2012. Regarding the anatomical variations, the soft-tissue thicknesses external to the ribs show that both symmetric and asymmetric patients always have asymmetric variations, by comparing the patients’ sides. It highlighted that the prosthesis bar should be modeled according to each patient’s rib positions and dimensions. The average differences between the skin and costal line curvature lengths were 84 ± 4 mm and 96 ± 11 mm, for male and female patients, respectively. On the other hand, the i3DExcavatum ensured a smooth curvature of the surgical prosthesis and was capable of predicting and simulating a virtual shape and size of the bar for asymmetric and symmetric patients. In conclusion, the i3DExcavatum allows preoperative personalization according to the thoracic morphology of each patient. It reduces surgery time and minimizes the margin error introduced by the manually bent bar, which only uses a template that copies the chest wall curvature.

Automatic modeling of an orthotic bracing for nonoperative correction of pectus carinatum

Pectus Carinatum is a deformity of the chest wall, characterized by an anterior protrusion of the sternum, often corrected surgically due to cosmetic motivation. This work presents an alternative approach to the current open surgery option, proposing a novel technique based on a personalized orthosis. Two different processes for the orthosis’ personalization are presented. One based on a 3D laser scan of the patient chest, followed by the reconstruction of the thoracic wall mesh using a radial basis function, and a second one, based on a computer tomography scan followed by a neighbouring cells algorithm. The axial position where the orthosis is to be located is automatically calculated using a Ray-Triangle intersection method, whose outcome is input to a pseudo Kochenek interpolating spline method to define the orthosis curvature. Results show that no significant differences exist between the patient chest physiognomy and the curvature angle and size of the orthosis, allowing a better cosmetic outcome and less initial discomfort.

An Electromagnetic Tracker System for the design of a dental superstructure

Nowadays, different techniques are available for manufacturing full-arch implant-supported prosthesis, many of them based on an impression procedure. Nevertheless, the long-term success of the prosthesis is highly influenced by the accuracy during such process, being affected by factors such as the impression material, implant position, angulation and depth. This paper investigates the feasibility of a 3D electromagnetic motion tracking system as an acquisition method for modeling such prosthesis. To this extent, we propose an implant acquisition method at the patient mouth, using a specific prototyped tool coupled with a tracker sensor, and a set of calibration procedures (for distortion correction and tool calibration), that ultimately obtains combined measurements of the implant’s position and angulation, and eliminating the use of any impression material. However, in the particular case of the evaluated tracking system, the order of magnitude of the obtained errors invalidates its use for this specific application.

INTEGRATED MANAGEMENT SYSTEMS: CRITICAL SUCCESS FACTORS

The purpose of this paper is to, in a holistic way, identify and explore the critical success factors (CSFs) that are considered in the context of the growing discussions, movements, proposed models, and case studies about the integration of management systems (MSs). This work is an investigation focused on the integration of MSs into an integrated management system (IMS) and the proposed approach takes into account the literature review as well as the experience gained by the authors on researches about Portuguese enterprises. This qualitative and empirical research, investigated the integration of MSs from existing scientific publications for the period 1999 to 2014, on-going case studies and one inquiry conducted by the authors. This research contributes to a better understanding of the CSFs regarding the integration of MSs and thus provides an insight on the preventive management. This research shows an evident lack of information regarding case studies on CSFs for integrated management systems (IMSs) and has identified a set of relevant CSFs, for MSs integration and associated guidelines that organizations should take as a priority, in order to be able to manage, on a preventive way, the implementation of IMSs, and consequently to become more competitive with added value for the stakeholders.

Gradual correction of phosphorus availability in the no-tillage system

ABSTRACT In areas cultivated under no-tillage system, the availability of phosphorus (P) can be raised by means of the gradual corrective fertilization, applying phosphorus into sowing furrows at doses higher than those required by the crops. The objective of this work was to establish the amount of P to be applied in soybean crop to increase content of P to pre-established values at the depth of 0.0 to 0.10 m. An experiment was carried out on a clayey Haplorthox soil with a randomized block experimental design distributed in split-split plot, with four replications. Two soybean crop systems (single or intercropped with Panicum maximum Jaca cv. Aruana) were evaluated in the plots. In addition, it was evaluated four P levels (0, 60, 120 and 180 kg ha-1 P2O5) applied in the first year in the split plots; and four P levels (0, 30, 60 and 90 kg ha-1 P2O5) applied in the two subsequent crops in the split-split plot. Contents of P were extracted by Mehlich-1 and Anion Exchange Resin methods from soil samples collected in the split-split plot. It was found that it is necessary to apply 19.4 or 11.1 kg ha-1 of P2O5, via triple superphosphate as source, to increase 1 mg dm-3 of P extracted by Mehlich-1 or Resin, respectively, in the 0.0 to 0.10 m layer of depth. The soil drain P character decreases as the amount of this nutrient supplied in the previous crops is increased.

Key factors in working capital management in the Brazilian market

Many studies have been conducted in corporate finance regarding long-term investment and financing decisions. However, short-term asset investments play a significant role in the balance sheet of companies. Moreover, financial managers dedicate significant amounts of time and effort to the subject of working capital management, balancing current assets and liabilities. This paper provides insights regarding the key factors of working capital management by exploring the internal variables of a number of companies. This study used data from 2,976 Brazilian public companies from 2001 to 2008, and found that debt level, size and growth rate can affect the working capital management of companies.

Dependence relationship between the critical quality factors and social impact

This paper shows the results of the empirical study conducted in 186 tourist accommodation businesses in Spain certified under the "Q for Tourist Quality", own System Quality Management. It was raised with the purpose of analyzing the structure of the relationship between critical quality factors and results-social impact, how they operate and the level of their influence on obtaining these results within the company. Starting from a deep theoretical revision we propose a theoretical model together with the hypotheses to be tested, and we proceed to validation using the technique of Structural Equation Models. The results obtained show that companies wishing to improve their social impact should take into account that leadership is the most important factor to achieve it. Leadership indirectly affects the social impact through its influence on alliances and resources, quality policy/planning, personnel management and learning.

Reported Use of Anabolic Steroids and Ergogenic Substances in Gym/Health Club Settings: Associations with Psychosocial and Exercise Behavior Factors

The industry of ergogenic supplements is increasing rapidly (Cole et al., 2003). Supplements may constitute an important aid for some vigourous exercise routines, but they may also be used as a hypothetical mean to achieve increases in muscular mass. This supposed effect of suplements can lead to its use by individuals who have high levels of drive for muscularity, a condition that is known to be associated with muscular dismorphy (or as it has been called recently vigorexia, Pope et al., 1997). Another psychological factor which can influence supplement consumption is exercise dependence, a borderline problem, as most studies present a prevalence of less than 10% in regular exercisers (Palmeira & Matos, 2006). Symptoms like tolerance or continuity could lead to the use of ergogenic aids to maintain the exercise levels. Also of interest for the understanding of the use of suplements are exercise frequency, volume and intensity, which could explain the ratesof consumption on a more physicological level.

What factors of satisfaction and motivation are affecting the development of the academic career in Portuguese higher education institutions?

An important constituent group and a key resource of higher education institutions (HEIs) is the faculty or academic staff. The centrality of the faculty role makes it a primary sculptor of institutional culture and has implications for the quality of the institution and therefore has a major role in achieving the objectives of the institution. Demand for academic staff in higher education has been increasing and may be expected to continue to increase. Moreover the performance of academic staff as teachers and researchers determines much of the student satisfaction and has an impact on student learning. There are many factors that serve to undermine the commitment of academics to their institutions and careers. Job satisfaction is important in revitalizing staff motivation and in keeping their enthusiasm alive. Well motivated academic staff can, with appropriate support, build a national and international reputation for themselves and the institution in the professional areas, in research and in publishing. This paper aims to identify the issues and their impacts on academic staff job satisfaction and motivation within Portuguese higher education institutions reporting an ongoing study financed by the European Union through the Portuguese Foundation for Science and Technology.

Parental predictors of poor visual outcome with occlusion treatment for unilateral amblyopia

Aim: Visual acuity outcome of amblyopia treatment depends on the compliance. This study aimed to determine parental predictors of poor visual outcome with occlusion treatment in unilateral amblyopia and identify the relationship between occlusion recommendations and the patient's actual dose of occlusion reported by the parents. Methods: This study comprised three phases: refractive adaptation for a period of 18 weeks after spectacle correction; occlusion of 3 to 6 hours per day during a period of 6 months; questionnaire administration and completion by parents. Visual acuity as assessed using the Sheridan-Gardiner singles or Snellen acuity chart was used as a measure of visual outcome. Correlation analysis was used to describe the strength and direction of two variables: prescribed occlusion reported by the doctor and actual dose reported by parents. A logistic binary model was adjusted using the following variables: severity, vulnerability, self-efficacy, behaviour intentions, perceived efficacy and treatment barriers, parents' and childrens' age, and parents' level of education. Results: The study included 100 parents (mean age 38.9 years, SD approx 9.2) of 100 children (mean age 6.3 years, SD approx 2.4) with amblyopia. Twenty-eight percent of children had no improvement in visual acuity. The results showed a positive mild correlation (kappa = 0.54) between the prescribed occlusion and actual dose reported by parents. Three predictors for poor visual outcome with occlusion were identified: parents' level of education (OR = 9.28; 95%CI 1.32-65.41); treatment barriers (OR = 2.75; 95%CI 1.22-6.20); interaction between severity and vulnerability (OR = 3.64; 95%CI 1.21-10.93). Severity (OR = 0.07; 95%CI 0.00-0.72) and vulnerability (OR = 0.06; 95%CI 0.05-0.74) when considered in isolation were identified as protective factors. Conclusions: Parents frequently do not use the correct dosage of occlusion as recommended. Parents' educational level and awareness of treatment barriers were predictors of poor visual outcome. Lower levels of education represented a 9-times higher risk of having a poor visual outcome with occlusion treatment.

Factors influencing amblyopia rehabilitation in occlusive therapy

Amblyopia develops in an early period and is a decrease of visual acuity (unilateral or bilateral) caused by a deprivation of vision or abnormal binocular interaction. Prognosis of Amblyopia is better when occlusive treatment is implemented in an early stage. Visual acuity of amblyopic eye does not improve without effective occlusive therapy. The aim of this study is to identify potential risk factors of noncompliance with treatment when it is implemented by parents in amblyopic children.

Risk factors for non compliance using occlusive therapy: a case study

Purpose: compliance with treatment is a common problem when treating amblyopic patients. Visual acuity of amblyopic eye does not improve without effective occlusive therapy. The aim of this study is to identify potential risk factors of non-compliance with treatment when it is implemented by family in amblyopic children. Setting: a quantitative transversal study was performed in a public hospital and in a private clinic in Lisbon.