Modelo Matemático para Predição da Acidose Metabólica no Nascimento em Gestações com Diástole Zero ou Reversa

Objetivos: elaborar modelo matemático baseado em parâmetros da cardiotocografia (CTG) anteparto de repouso para predição da acidose metabólica no nascimento, caracterizada por valores do excesso de bases (BE) inferiores a -10 mEq/L, em gestações com diagnóstico de diástole zero (DZ) ou reversa (DR) na dopplervelocimetria das artérias umbilicais. Métodos: foi estudada a última cardiotocografia de 127 gestantes de alto risco com diagnóstico de DZ ou DR, pela análise visual do traçado. Os parâmetros da CTG estudados foram a variabilidade da FCF, acelerações transitórias, desacelerações e padrão pseudo-sinusoidal. Entre as características da gravidez foram analisadas a idade gestacional, o intervalo em dias entre o diagnóstico da DZ ou DR e o parto. O modelo de regressão logística foi aplicado na determinação do melhor modelo matemático para predição da acidose. Resultados: a acidose metabólica ocorreu em 51 casos (40,2%). O modelo matemático para predição da acidose contemplou os seguintes parâmetros: intervalo em dias entre o diagnóstico da DZ ou DR e o parto (X1), idade gestacional em semanas (X2), variabilidade da FCF <5 bpm (X3) e variabilidade da FCF entre 5 e 9 bpm (X4). As variáveis de análise da variabilidade receberam valor 1 quando presente e valor 0 quando ausente. O coeficiente z foi calculado pela seguinte fórmula: z = 2,2348 + (-0,0117 X1) + (-0,09 X2) + (1,9552 X3) + (-0,4474 X4). Aplicando-se a expressão p = e z/(1 + e z), a probabilidade (p) foi calculada. Conclusões: o modelo matemático apresentado permite calcular a probabilidade da ocorrência de acidose metabólica no nascimento, em gestações com DZ ou DR, a partir da análise visual da cardiotocografia anteparto de repouso.

Acidic dissolution of iron oxides and regeneration of a ceramic filter medium

The dewatering of iron ore concentrates requires large capacity in addition to producing a cake with low moisture content. Such large processes are commonly energy intensive and means to lower the specific energy consumption are needed. Ceramic capillary action disc filters incorporate a novel filter medium enabling the harnessing of capillary action, which results in decreased energy consumption in comparison to traditional filtration technologies. As another benefit, the filter medium is mechanically and chemically more durable than, for example, filter cloths and can, thus, withstand harsh operating conditions and possible regeneration better than other types of filter media. In iron ore dewatering, the regeneration of the filter medium is done through a combination of several techniques: (1) backwashing, (2) ultrasonic cleaning, and (3) acid regeneration. Although it is commonly acknowledged that the filter medium is affected by slurry particles and extraneous compounds, published research, especially in the field of dewatering of mineral concentrates, is scarce. Whereas the regenerative effect of backwashing and ultrasound are more or less mechanical, regeneration with acids is based on chemistry. The chemistry behind the acid regeneration is, naturally, dissolution. The dissolution of iron oxide particles has been extensively studied over several decades but those studies may not necessarily be directly applicable in the regeneration of the filter medium which has undergone interactions with the slurry components. The aim of this thesis was to investigate if free particle dissolution indeed correlates with the regeneration of the filter medium. For this purpose, both free particle dissolution and dissolution of surface adhered particles were studied. The focus was on acidic dissolution of iron oxide particles and on the study of the ceramic filter medium used in the dewatering of iron ore concentrates. The free particle dissolution experiments show that the solubility of synthetic fine grained iron oxide particles in oxalic acid could be explained through linear models accounting for the effects of temperature and acid concentration, whereas the dissolution of a natural magnetite is not so easily explained by such models. In addition, the kinetic experiments performed both support and contradict the work of previous authors: the suitable kinetic model here supports previous research suggesting solid state reduction to be the reaction mechanism of hematite dissolution but the formation of a stable iron oxalate is not supported by the results of this research. Several other dissolution mechanisms have also been suggested for iron oxide dissolution in oxalic acid, indicating that the details of oxalate promoted reductive dissolution are not yet agreed and, in this respect, this research offers added value to the community. The results of the regeneration experiments with the ceramic filter media show that oxalic acid is highly effective in removing iron oxide particles from the surface of the filter medium. The dissolution of those particles did not, however, exhibit the expected behaviour, i.e. complete dissolution. The results of this thesis show that although the regeneration of the ceramic filter medium with acids incorporates the dissolution of slurry particles from the surface of the filter medium, the regeneration cannot be assessed purely based upon free particle dissolution. A steady state, dependent on temperature and on the acid concentration, was observed in the dissolution of particles from the surface even though the limit of solubility of free iron oxide particles had not been reached. Both the regeneration capacity and efficiency, with regards to the removal of iron oxide particles, was found to be temperature dependent, but was not affected by the acid concentration. This observation further suggests that the removal of the surface adhered particles does not follow the dissolution of free particles, which do exhibit a dependency on the acid concentration. In addition, changes in the permeability and in the pore structure of the filter medium were still observed after the bulk concentration of dissolved iron had reached a steady state. Consequently, the regeneration of the filter medium continued after the dissolution of particles from the surface had ceased. This observation suggests that internal changes take place at the final stages of regeneration. The regeneration process could, in theory, be divided into two, possibly overlapping, stages: (1) dissolution of surface-adhered particles, and (2) dissolution of extraneous compounds from within the pore structure. In addition to the fundamental knowledge generated during this thesis, tools to assess the effects of parameters on the regeneration of the ceramic filter medium are needed. It has become clear that the same tools used to estimate the dissolution of free particles cannot be used to estimate the regeneration of a filter medium unless only a robust characterisation of the order of regeneration efficiency is needed.

Fatores preditores para o óbito neonatal em gestações com diástole zero ou reversa na doplervelocimetria da artéria umbilical

OBJETIVO: avaliar os fatores de risco antenatais e pós-natais para o óbito neonatal em gestações com diástole zero (DZ) ou reversa (DR) na doplervelocimetria da artéria umbilical. MÉTODOS: estudo transversal, retrospectivo, inferencial, a partir de 48 prontuários de gestações únicas com DZ ou DR, idade gestacional entre 24 e 34 semanas, em uma maternidade no Nordeste do Brasil. A média de idade foi de 27,3 anos (DP: 7,9). Vinte (41,7%) eram primigestas. Síndromes hipertensivas foram observadas em 44 (91,7%) casos. Trinta e cinco (72,9%) apresentavam DZ e 13 (27,1%) DR. Procedeu-se inicialmente à análise univariada (teste t de Student e teste Exato de Fisher), relacionando os parâmetros com o desfecho avaliado (óbito neonatal). As variáveis que apresentaram associação significativa foram incluídas no modelo de regressão logística (Estatística de Wald). O nível de significância utilizado foi de 5%. RESULTADOS: a mortalidade perinatal foi de 64,6% (31/48). Ocorreram cinco óbitos fetais e 26 neonatais. A média de idade gestacional no momento do diagnóstico foi de 27,9 (DP: 2,8) semanas. A resolução da gestação antes de 24 horas após o diagnóstico ocorreu em 52,1% dos casos. Parto abdominal foi realizado em 85,4% dos casos. Os recém-nascidos pesaram em média 975,9 g (DP: 457,5). Vinte e quatro (57,1%) apresentaram Apgar menor que 7 no primeiro minuto e 21,4%, no quinto. A idade gestacional no momento do diagnóstico, o peso ao nascer e o Apgar de primeiro minuto revelaram-se variáveis significativamente relacionadas com o óbito neonatal (valores de p foram, respectivamente, 0,008; 0,004 e 0,020). As razões de chance foi de 6,6; 25,3 e 13,8 para o óbito neonatal, quando o diagnóstico foi estabelecido até a 28ª semana, peso <1000 g e Apgar < 7, respectivamente. CONCLUSÕES: idade gestacional no momento do diagnóstico, peso ao nascer e Apgar de primeiro minuto foram fatores capazes de predizer o óbito neonatal em gestações com DZ ou DR na doplervelocimetria da artéria umbilical.

CO2 sparging for improving the filtration properties of iron ore slurries

Iron ore treatment processes are usually continuous and high tonnage and filtration equipment has to meet these requirements. In magnetite (Fe3O4) treatment process continuous rotary disc filters are often used for filtration. Carbon dioxide (CO2) treatment is a fairly novel and un-known filtration enhancing process. The interest to use CO2 is quite high because CO2 is a greenhouse gas that is abundant, readily available and capture and use of CO2 would be environmentally beneficial. The focus of this thesis was to investigate if CO2 could be used to enhance the filtration of magnetite with ceramic disc filter. Previous studies have suggested that CO2 could be used to enhance the filtration properties of different iron ores thus increasing the filtration capacity. In the literature part, the basic theory of filtration and the particle properties affecting filtration were discussed. The basic steps of a typical ore treatment process were presented. The reasons why CO2 might enhance the filtration properties of different ores were investigated. A literature survey of earlier studies of CO2 addition as a filter aid was presented and the basic chemical properties and reactions of CO2 were also discussed. The experimental part was done at the LUT Laboratory of Separation Technology using different magnetite samples from the industry. The filtration experiments indicated that CO2 had a positive influence on the filtration properties of magnetite slurry. Zeta potential of untreated and CO2 treated magnetite was measured and CO2 treated magnetite had lower zeta potential values than the untreated magnetite. The filtration capacity was increased while the cake moisture levels were only slightly increased.

Development of an environmentally friendly method of starch oxidation by hydrogen peroxide and a complex water-soluble Iron catalyst

Oxidized starch is a key component in the paper industry, where it is used as both surfacing sizer and filler. Large quantities are annually used for this purpose; however, the methods for the oxidation are not environmentally friendly. In our research, we have studied the possibility to replace the harmful oxidation agents, such as hypochlorite or iodates and transition metal catalysts, with a more environmentally friendly oxidant, hydrogen peroxide (H2O2), and a special metal complex catalyst (FePcS), of which only a small amount is needed. The work comprised batch and semi-batch studies by H2O2, ultrasound studies of starch particles, determination of low-molecular by-products and determination of the decomposition kinetics of H2O2 in the presence of starch and the catalyst. This resulted in a waste-free oxidation method, which only produces water and oxygen as side products. The starch oxidation was studied in both semi-batch and batch modes in respective to the oxidant (H2O2) addition. The semi-batch mode proved to yield a sufficient degree of substitution (COOH groups) for industrial purposes. Treatment of starch granules by ultrasound was found to improve the reactivity of starch. The kinetic results were found out to have a rather complex pattern – several oxidation phases were observed, apparently due to the fact that the oxidation reaction in the beginning only took place on the surface, whereas after a prolonged reaction time, partial degradation of the solid starch granules allowed further reaction in the interior parts. Batch-mode experiments enabled a more detailed study of the mechanisms of starch in the presence of H2O2 and the catalyst, but yielded less oxidized starch due to rapid decomposition of H2O2 due to its high concentrations. The effect of the solid-liquid (S/L) ratio in the reaction system was studied in batch experiments. These studies revealed that the presence of the catalyst and the starch enhance the H2O2 decomposition.

Identification of Some Additional Loss Components in High-Power Low-Voltage Permanent Magnet Generators

Permanent magnet generators (PMG) represent the cutting edge technology in modern wind mills. The efficiency remains high (over 90%) at partial loads. To improve the machine efficiency even further, every aspect of machine losses has to be analyzed. Additional losses are often given as a certain percentage without providing any detailed information about the actual calculation process; meanwhile, there are many design-dependent losses that have an effect on the total amount of additional losses and that have to be taken into consideration. Additional losses are most often eddy current losses in different parts of the machine. These losses are usually difficult to calculate in the design process. In this doctoral thesis, some additional losses are identified and modeled. Further, suggestions on how to minimize the losses are given. Iron losses can differ significantly between the measured no-load values and the loss values under load. In addition, with embedded magnet rotors, the quadrature-axis armature reaction adds losses to the stator iron by manipulating the harmonic content of the flux. It was, therefore, re-evaluated that in salient pole machines, to minimize the losses and the loss difference between the no-load and load operation, the flux density has to be kept below 1.5 T in the stator yoke, which is the traditional guideline for machine designers. Eddy current losses may occur in the end-winding area and in the support structure of the machine, that is, in the finger plate and the clamping ring. With construction steel, these losses account for 0.08% of the input power of the machine. These losses can be reduced almost to zero by using nonmagnetic stainless steel. In addition, the machine housing may be subjected to eddy current losses if the flux density exceeds 1.5 T in the stator yoke. Winding losses can rise rapidly when high frequencies and 10–15 mm high conductors are used. In general, minimizing the winding losses is simple. For example, it can be done by dividing the conductor into transposed subconductors. However, this comes with the expense of an increase in the DC resistance. In the doctoral thesis, a new method is presented to minimize the winding losses by applying a litz wire with noninsulated strands. The construction is the same as in a normal litz wire but the insulation between the subconductors has been left out. The idea is that the connection is kept weak to prevent harmful eddy currents from flowing. Moreover, the analytical solution for calculating the AC resistance factor of the litz-wire is supplemented by including an end-winding resistance in the analytical solution. A simple measurement device is developed to measure the AC resistance in the windings. In the case of a litz-wire with originally noninsulated strands, vacuum pressure impregnation (VPI) is used to insulate the subconductors. In one of the two cases studied, the VPI affected the AC resistance factor, but in the other case, it did not have any effect. However, more research is needed to determine the effect of the VPI on litz-wire with noninsulated strands. An empirical model is developed to calculate the AC resistance factor of a single-layer formwound winding. The model includes the end-winding length and the number of strands and turns. The end winding includes the circulating current (eddy currents that are traveling through the whole winding between parallel strands) and the main current. The end-winding length also affects the total AC resistance factor.

Comparison of Biomass Gasification Technologies for Natural Gas Substitution in Iron Ore Pelletizing Plants

The iron ore pelletizing process consumes high amounts of energy, including nonrenewable sources, such as natural gas. Due to fossil fuels scarcity and increasing concerns regarding sustainability and global warming, at least partial substitution by renewable energy seems inevitable. Gasification projects are being successfully developed in Northern Europe, and large-scale circulating fluidized bed biomass gasifiers have been commissioned in e.g. Finland. As Brazil has abundant biomass resources, biomass gasification is a promising technology in the near future. Biomasses can be converted into product gas through gasification. This work compares different technologies, e.g. air, oxygen and steam gasification, focusing on the use of the product gas in the indurating machine. The use of biosynthetic natural gas is also evaluated. Main parameters utilized to assess the suitability of product gas were adiabatic flame temperature and volumetric flow rate. It was found that low energy content product gas could be utilized in the traveling grate, but it would require burner’s to be changed. On the other hand, bio-SGN could be utilized without any adaptions. Economical assessment showed that all gasification plants are feasible for sizes greater than 60 MW. Bio-SNG production is still more expensive than natural gas in any case.

Towards sustainable Iron- and steelmaking with economic optimization

The iron and steelmaking industry is among the major contributors to the anthropogenic emissions of carbon dioxide in the world. The rising levels of CO2 in the atmosphere and the global concern about the greenhouse effect and climate change have brought about considerable investigations on how to reduce the energy intensity and CO2 emissions of this industrial sector. In this thesis the problem is tackled by mathematical modeling and optimization using three different approaches. The possibility to use biomass in the integrated steel plant, particularly as an auxiliary reductant in the blast furnace, is investigated. By pre-processing the biomass its heating value and carbon content can be increased at the same time as the oxygen content is decreased. As the compression strength of the preprocessed biomass is lower than that of coke, it is not suitable for replacing a major part of the coke in the blast furnace burden. Therefore the biomass is assumed to be injected at the tuyere level of the blast furnace. Carbon capture and storage is, nowadays, mostly associated with power plants but it can also be used to reduce the CO2 emissions of an integrated steel plant. In the case of a blast furnace, the effect of CCS can be further increased by recycling the carbon dioxide stripped top gas back into the process. However, this affects the economy of the integrated steel plant, as the amount of top gases available, e.g., for power and heat production is decreased. High quality raw materials are a prerequisite for smooth blast furnace operation. High quality coal is especially needed to produce coke with sufficient properties to ensure proper gas permeability and smooth burden descent. Lower quality coals as well as natural gas, which some countries have in great volumes, can be utilized with various direct and smelting reduction processes. The DRI produced with a direct reduction process can be utilized as a feed material for blast furnace, basic oxygen furnace or electric arc furnace. The liquid hot metal from a smelting reduction process can in turn be used in basic oxygen furnace or electric arc furnace. The unit sizes and investment costs of an alternative ironmaking process are also lower than those of a blast furnace. In this study, the economy of an integrated steel plant is investigated by simulation and optimization. The studied system consists of linearly described unit processes from coke plant to steel making units, with a more detailed thermodynamical model of the blast furnace. The results from the blast furnace operation with biomass injection revealed the importance of proper pre-processing of the raw biomass as the composition of the biomass as well as the heating value and the yield are all affected by the pyrolysis temperature. As for recycling of CO2 stripped blast furnace top gas, substantial reductions in the emission rates are achieved if the stripped CO2 can be stored. However, the optimal recycling degree together with other operation conditions is heavily dependent on the cost structure of CO2 emissions and stripping/storage. The economical feasibility related to the use of DRI in the blast furnace depends on the price ratio between the DRI pellets and the BF pellets. The high amount of energy needed in the rotary hearth furnace to reduce the iron ore leads to increased CO2 emissions.

Effects of iron-ore particles on propagule release, growth and photosynthetic performance of Sargassum vulgare C. Agardh (Phaeophyta, Fucales)

The effect of iron-ore particles on the propagule release and growth of Sargassum vulgare C. Agardh was tested under treatments with different concentrations of iron-ore particles: 0.1, 1.0, 10.0 g.L-1 and a solution of 10.0 g.L-1 of filtered iron-ore. Filtered seawater was used as control. Photosynthesis vs. irradiance (P-I) curves were calculated for S. vulgare in the presence of iron-ore and in seawater. There was no significant difference in the number of propagules released by the receptacles or in the percentage of zygote formation among the treatments. The released propagules acted like aggregation centers for the particles, those more heavily coated with iron (10.0 g.L-1) exhibiting the highest sinking velocity (32.6 ± 9.8 mm.s-1). No difference in the percentage of embryo survival was detected during the first week in culture. After four weeks the embryos grew in all treatments. Maximum frond development (5.3 ± 0.8 mm) was observed in treatment of seawater enriched with Provasoli's medium (PES) while initial filoids did not develop in three treatments without PES and with iron-ore (0.1 g.L-1, 1.0 g.L-1 and 10.0 g.L-1). The values for Pmax, alpha and respiration showed no significant differences between the P-I curves. The calculated value for I K was 106.26 µmol.m-2.s-1 to the control curve and 981.49 µmol.m-2.s-1 to the iron-ore curve. The results indicate that the iron-ore particles in high concentration reduce the growth of S. vulgare as they recovered the embryos, juveniles and young plants. In contrast, the presence of the particles did not affect the release of gametes, percentage of zygote formation or the percentage of embryo survival.

Sementes recalcitrantes: intolerantes a baixas temperaturas? Embriões recalcitrantes de Inga vera Willd. subsp. affinis (DC.) T. D. Penn. toleram temperatura sub-zero

Sementes recalcitrantes são intolerantes à dessecação e a baixas temperaturas, que são as principais formas de conservação de sementes e, portanto, são de difícil armazenamento. Inga vera subsp. affinis produz sementes denominadas recalcitrantes, uma vez que não toleram redução do teor de água para valores inferiores a 35%. Neste trabalho é demonstrada a tolerância desses embriões a temperatura de -2 ºC. Embriões de I. vera de diferentes estádios de maturação foram armazenados por até 45 dias nas temperaturas de 8 ºC a -18 ºC, com ou sem secagens prévias até -4,0 e -6,0 MPa. Os resultados permitiram observar que, embora nenhum tratamento tenha proporcionado resistância à temperatura de -18 ºC, a secagem dos embriões maduros a -4 MPa proporcionou maior tolerância à redução de temperatura até níveis de congelamento da água (-2 ºC).

Inhibition of lipid peroxidation and iron (II)-dependent DNA damage by extracts of Pothomorphe peltata (L.) Miq

Leaves of Pothomorphe peltata (L.) Miq. (Piperaceae) are used locally as anti-inflammatory, antipyretic, hepatoprotective and diuretic infusions and to treat external ulcers and local infections in several parts of the Peruvian, Bolivian and Brazilian Amazon region. The antioxidant activity of different extracts of P. peltata was studied using the hydroperoxide-initiated chemiluminescence assay in liver homogenates, and the methanolic extract was found to have the highest antioxidant activity, with an IC50 = 4 µg/ml. Aqueous and dichloromethane extracts did not show antioxidant activity. The extracts were further evaluated using the thiobarbituric acid-reactive substances (TBARS) assay. Finally, an assay of DNA sugar damage induced by Fe (II) salt was used to determine the capacity of the extracts to suppress the oxidative degradation of DNA. All the extracts showed antioxidant activity in the latter two bioassays. The methanolic extract showed the highest activity in reducing oxidative damage to DNA, with an IC50 = 5 µg/ml. Since this extract was highly effective in reducing chemiluminescence and DNA damage, and because the latter activity could be due to the presence of compounds that bind to DNA, DNA-binding activity was studied using the DNA-methyl green (DNA-MG) bioassay. A 30% decrease in the initial absorbance of DNA-MG complex was observed in the methanolic extract at 1000 µg/ml, suggesting the presence of compounds that bind to genetic material. No DNA-binding activity was observed in the aqueous or dichloromethane extracts

Disaccharidase levels in normal epithelium of the small intestine of rats with iron-deficiency anemia

Iron-deficiency anemia is the nutritional deficiency most frequently occurring throughout the world, which manifests as a complex systemic disease involving all cells, affecting enzyme activities and modifying protein synthesis. In view of these considerations, the objective of the present study was to determine the effects of iron-deficiency anemia on disaccharidases and on the epithelial morphokinetics of the jejunal mucosa. Newly weaned male Wistar rats were divided into 4 groups of 10 animals each: C6w received a standard ration containing 36 mg elemental iron per kg ration for 6 weeks; E6w received an iron-poor ration (5-8 mg/kg ration) for 6 weeks; C10w received an iron-rich ration (36 mg/kg ration) for 10 weeks; E10w received an iron-poor ration for 6 weeks and then an iron-rich ration (36 mg/kg) for an additional 4 weeks. Jejunal fragments were used to measure disaccharidase content and to study cell proliferation. The following results were obtained: 1) a significant reduction (P<0.001) of animal weight, hemoglobin (Hb), serum iron and total iron-binding capacity (TIBC) in group E6w as compared to C6w; reversal of the alterations in Hb, serum iron and TIBC with iron repletion (E10w = C10w); animal weights continued to be significantly different in groups E10w and C10w. 2) Sucrase and maltase levels were unchanged; total and specific lactase levels were significantly lower in group E6w and this reduction was reversed by iron repletion (E10w = C10w). 3) The cell proliferation parameters did not differ between groups. On the basis of these results, we conclude that lactase production was influenced by iron deficiency and that this fact was not related to changes in cell population and proliferation in the intestinal mucosa

Lipid peroxidation, antioxidant enzymes and glutathione levels in human erythrocytes exposed to colloidal iron hydroxide in vitro

The free form of the iron ion is one of the strongest oxidizing agents in the cellular environment. The effect of iron at different concentrations (0, 1, 5, 10, 50, and 100 µM Fe3+) on the normal human red blood cell (RBC) antioxidant system was evaluated in vitro by measuring total (GSH) and oxidized (GSSG) glutathione levels, and superoxide dismutase (SOD), catalase, glutathione peroxidase (GSH-Px) and reductase (GSH-Rd) activities. Membrane lipid peroxidation was assessed by measuring thiobarbituric acid reactive substance (TBARS). The RBC were incubated with colloidal iron hydroxide and phosphate-buffered saline, pH 7.45, at 37oC, for 60 min. For each assay, the results for the control group were: a) GSH = 3.52 ± 0.27 µM/g Hb; b) GSSG = 0.17 ± 0.03 µM/g Hb; c) GSH-Px = 19.60 ± 1.96 IU/g Hb; d) GSH-Rd = 3.13 ± 0.17 IU/g Hb; e) catalase = 394.9 ± 22.8 IU/g Hb; f) SOD = 5981 ± 375 IU/g Hb. The addition of 1 to 100 µM Fe3+ had no effect on the parameters analyzed. No change in TBARS levels was detected at any of the iron concentrations studied. Oxidative stress, measured by GSH kinetics over time, occurs when the RBC are incubated with colloidal iron hydroxide at concentrations higher than 10 µM of Fe3+. Overall, these results show that the intact human RBC is prone to oxidative stress when exposed to Fe3+ and that the RBC has a potent antioxidant system that can minimize the potential damage caused by acute exposure to a colloidal iron hydroxide in vitro.

Relation of the disaccharidases in the small intestine of the rat to the degree of experimentally induced iron-deficiency anemia

Hypolactasia associated with severe iron-deficiency anemia has been reported in several studies. The objective of the present study was to determine whether hypolactasia is associated with the degree and duration of iron-deficiency anemia. Newly weaned male Wistar rats were divided into a control group receiving a diet supplemented with iron (C) and an experimental group (E) receiving a diet not supplemented with iron (iron-deficiency diet). The animals were studied on the 3rd, 5th, 7th, 14th, 21st, 28th and 35th days of the experiment, when overall and iron nutritional status and disaccharidase activity in the small intestine were determined by the Dahlqvist method. A reduction in weight occurred in the anemic animals starting on the 5th day of the study. Anemia was present in the experimental animals, with a progressive worsening up to the 14th day (hemoglobin: C = 13.27 and E = 5.37) and stabilizing thereafter. Saccharase and maltase activities did not differ significantly between groups, whereas lactase showed a significant reduction in total (TA) and specific activity (SA) in the anemic animals starting on the 21st day of the study. Median lactase TA for the C and E groups was 2.27 and 1.25 U on the 21st day, 2.87 and 1.88 U on the 28th day, and 4.20 and 1.59 U on the 35th day, respectively. Median lactase SA was 0.31 and 0.20 U/g wet weight on the 21st day, 0.39 and 0.24 U/g wet weight on the 28th day, and 0.42 and 0.23 U/g wet weight on the 35th day, respectively. These findings suggest a relationship between the enzymatic alterations observed and both the degree and duration of the anemic process. Analysis of other studies on intestinal disaccharidases in anemia suggests that the mechanism of these changes may be functional, i.e., that the enterocytes may suffer a reduction in their ability to synthesize these enzymes.