Use of electronic portal imaging devices for electron treatment verification

This study aims to help broaden the use of electronic portal imaging devices (EPIDs) for pre-treatment patient positioning verification, from photon-beam radiotherapy to photon- and electron-beam radiotherapy, by proposing and testing a method for acquiring clinicallyuseful EPID images of patient anatomy using electron beams, with a view to enabling and encouraging further research in this area. EPID images used in this study were acquired using all available beams from a linac configured to deliver electron beams with nominal energies of 6, 9, 12, 16 and 20 MeV, as well as photon beams with nominal energies of 6 and 10 MV. A widely-available heterogeneous, approximately-humanoid, thorax phantom was used, to provide an indication of the contrast and noise produced when imaging different types of tissue with comparatively realistic thicknesses. The acquired images were automatically calibrated, corrected for the effects of variations in the sensitivity of individual photodiodes, using a flood field image. For electron beam imaging, flood field EPID calibration images were acquired with and without the placement of blocks of water-equivalent plastic (with thicknesses approximately equal to the practical range of electrons in the plastic) placed upstream of the EPID, to filter out the primary electron beam, leaving only the bremsstrahlung photon signal. While the electron beam images acquired using a standard (unfiltered) flood field calibration were observed to be noisy and difficult to interpret, the electron beam images acquired using the filtered flood field calibration showed tissues and bony anatomy with levels of contrast and noise that were similar to the contrast and noise levels seen in the clinically acceptable photon beam EPID images. The best electron beam imaging results (highest contrast, signal-to-noise and contrast-to-noise ratios) were achieved when the images were acquired using the higher energy electron beams (16 and 20 MeV) when the EPID was calibrated using an intermediate (12 MeV) electron beam energy. These results demonstrate the feasibility of acquiring clinically-useful EPID images of patient anatomy using electron beams and suggest important avenues for future investigation, thus enabling and encouraging further research in this area. There is manifest potential for the EPID imaging method proposed in this work to lead to the clinical use of electron beam imaging for geometric verification of electron treatments in the future.

The use of a synthetic prostaglandin-E1 analog (misoprostol) as an adjunct to pancreatic-enzyme replacement in cystic-fibrosis

Eleven cystic fibrosis children (mean age, 9.6 years) were chosen at random to participate in a study to observe the effects of concurrently stimulating gastric/duodenal bicarbonate secretion and inhibiting gastric acid secretion, using a methylated prostaglandin E1 analogue in patients with pancreatic insufficiency and taking pancreatic enzymes. Percentage fat absorption in 3-day stool collections were calculated before and after commencing therapy with misoprostol, 400 μg/day in divided doses. We found a significant reduction in fat output (14.7 ± 11.7 versus 7.5 ± 3.5 g/day, p < 0.05) in the study group as a whole and a significant reduction in steatorrhoeic level as a percentage of fat intake in all of the patients with abnormal base-line collections (23.1% versus 9.2%, p < 0.002). We conclude that misoprostol should be considered in cystic fibrosis patients with steatorrhoea as a means of improving nutrient absorption.

The use of animation to promote student learning about the importance of mental well-being for tertiary study success

It is now widely acknowledged that student mental well-being is a critical factor in the tertiary student learning experience and is important to student learning success. The issue of student mental well-being also has implications for effective student transition out of university and into the world of work. It is therefore vital that intentional strategies are adopted by universities both within the formal curriculum, and outside it, to promote student well-being and to work proactively and preventatively to avoid a decline in student psychological well-being. This paper describes how the Queensland University of Technology Law School is using animation to teach students about the importance for their learning success of the protection of their mental well-being. Mayer and Moreno (2002) define an animation as an external representation with three main characteristics: (1) it is a pictorial representation, (2) it depicts apparent movement, and (3) it consists of objects that are artificially created through drawing or some other modelling technique. Research into the effectiveness of animation as a tool for tertiary student learning engagement is relatively new and growing field of enquiry. Nash argues, for example, that animations provide a “rich, immersive environment [that] encourages action and interactivity, which overcome an often dehumanizing learning management system approach” (Nash, 2009, 25). Nicholas states that contemporary millennial students in universities today, have been immersed in animated multimedia since their birth and in fact need multimedia to learn and communicate effectively (2008). However, it has also been established, for example through the work of Lowe (2003, 2004, 2008) that animations can place additional perceptual, attentional, and cognitive demands on students that they are not always equipped to cope with. There are many different genres of animation. The dominant style of animation used in the university learning environment is expository animation. This approach is a useful tool for visualising dynamic processes and is used to support student understanding of subjects and themes that might otherwise be perceived as theoretically difficult and disengaging. It is also a form of animation that can be constructed to avoid any potential negative impact on cognitive load that the animated genre might have. However, the nature of expository animation has limitations for engaging students, and can present as clinical and static. For this reason, the project applied Kombartzky, Ploetzner, Schlag, and Metz’s (2010) cognitive strategy for effective student learning from expository animation, and developed a hybrid form of animation that takes advantage of the best elements of expository animation techniques along with more engaging short narrative techniques. First, the paper examines the existing literature on the use of animation in tertiary educational contexts. Second, the paper describes how animation was used at QUT Law School to teach students about the issue of mental well-being and its importance to their learning success. Finally, the paper analyses the potential of the use of animation, and of the cognitive strategy and animation approach trialled in the project, as a teaching tool for the promotion of student learning about the importance of mental well-being.

Use of 45° pulse pair as a filter for pure-phase two-dimensional NMR spectroscopy

Conventionally two-dimensional NMR spectra are recorded in the absolute-intensity mode (1-4). It has recently been demonstrated that absorption-mode 2D spectra have much higher resolution and are the preferred mode of presentation, especially for 2D spectra of biomolecules (5-7). Indeed, any experimental scheme which yields phasemixed lineshapes is subject to modification to yield pure-phase spectra, even at the expense of intensity and anomalous multiplet structure (8-10). For this purpose two types of filters are already known: the z filter (9, 20) and the purging pulse (8, 10). In this note, we propose a 45” pulse pair as a filter for obtaining pure-phase 2D spectra, mainly for experiments in which the above filters do not yield pure-phase spectra.

Promoting articulated action from diverse stakeholders in response to public policy scenarios: A case analysis of the use of ‘scenario improvisation’ method

In this paper we present a novel application of scenario methods to engage a diverse constituency of senior stakeholders, with limited time availability, in debate to inform planning and policy development. Our case study project explores post-carbon futures for the Latrobe Valley region of the Australian state of Victoria. Our approach involved initial deductive development of two ‘extreme scenarios’ by a multi-disciplinary research team, based upon an extensive research programme. Over four workshops with the stakeholder constituency, these initial scenarios were discussed, challenged, refined and expanded through an inductive process, whereby participants took ‘ownership’ of a final set of three scenarios. These were both comfortable and challenging to them. The outcomes of this process subsequently informed public policy development for the region. Whilst this process did not follow a single extant structured, multi-stage scenario approach, neither was it devoid of form. Here, we seek to theorise and codify elements of our process – which we term ‘scenario improvisation’ – such that others may adopt it.

The use of F-specific coliphages to assess effluent treatment and reuse schemes

This study reports on the use of naturally occurring F-specific coliphages, as well as spiked MS-2 phage, to evaluate a land-based effluent treatment/reuse system and an effluent irrigation scheme. Both the natural phages and the spiked MS-2 phage indicated that the effluent treatment/reuse system (FILTER - Filtration and Irrigated cropping for Land Treatment and Effluent Reuse) achieved a reduction in phage levels over the treatment system by one to two log10. FILTER reduced natural F-specific phage numbers from around 103 to below 102 100-ml-1 and the spiked phage from 105 to around 104 100-ml-1 (incoming compared with outgoing water). In the effluent irrigation scheme, phage spiked into the holding ponds dropped from 106 to 102 100-ml-1 after 168 h (with no detectable levels of natural F-specific phage being found prior to spiking). Only low levels of the spiked phage (102 gm-1) could be recovered from soil irrigated with phage-spiked effluent (at 106 phage 100 ml-1) or from fruits (around 102 phage per fruit) that had direct contact with soil which had been freshly irrigated with the same phage-spiked effluent.

A study of the use of the Edinburgh postnatal depression scale with parent groups outside the postpartum period

The Edinburgh Postnatal Depression Scale (EPDS) was sent by post to 206 mothers and 201 fathers of toddlers (aged between 19 and 22 months). At the same time these parents also completed subscales of the Crown—Crisp Experiential Index (CCEI). The responses were used to assess the feasibility of postal completion of the EPDS and its acceptability to parents outside the postpartum year, particularly fathers for whom there have been no previous reports of its use. On a small sub-group, the sensitivity, specificity and predictive values of the measures were assessed using the Present. State Examination. Answers to the depression subscale of the CCEI to the EPDS and to the Present State Examination were compared to assess validity. Completion of the postally-administered EPDS was satisfactory, though some difficulties were experienced in a second postal administration to a subsample. The scale was completed without obvious error or omission and this, combined with positive comments from parents, suggests the acceptability of the scale to both mothers and fathers. The mean scores were higher for mothers than for fathers, but the pattern of distribution was similar with a marked positive skew and a distinct decline in scores above 10. Because the subsample of parents interviewed was small the calculation of sensitivity and specificity has to be treated with caution. However, the results for mothers suggest that the EPDS has satisfactory validity for this group and one superior to the depression subscale of the CCEI. Among the fathers interviewed there were insufficient cases to enable calculation of sensitivity and specificity. Other results were encouraging, however, and suggest the merit of further studies of the application and validity of the EPDS with fathers.

Laughing with the lecturer: The use of humour in shaping university teaching

This paper addresses the ways in which humour is used by university academics to shape teaching personas. Based upon the work of Mauss and Foucault, and employing semi-structured, in-depth interviews with a range of university teachers, this research suggests that most tertiary teachers deliberately fashion various kinds of teaching persona, which they then perform in lectures and tutorials. The use of humour is widely seen as an important component within this form of self-shaping, as it fits within dominant frameworks of expectation regarding contemporary models of “edutainment”. This research demonstrates that a wide range of practices of the self—including physical, verbal, and relational elements—are employed by academics as part of shaping various humorous teaching personas. Some boundaries exist limiting the use of these pedagogic characters; for example, arguments about natural ability with humour prefigure who is most likely to deploy humour as a practice of professional self-formation. Also, professional concerns regarding seniority and job security are also factored into decision-making regarding those humorous personas likely to be considered appropriate within particular tertiary teaching contexts.

Re-use of fluoride contaminated bone char sludge in concrete

Managing sludge generated by treating groundwater contaminated with geogenic contaminants (fluoride, arsenic, and iron) is a major issue in developing nations. Their re-use in civil engineering applications is a possible pathway for reducing the impact on the geo-environment. This paper examines the re-use of one such sludge material, namely, fluoride contaminated bone char sludge, as partial replacement for fine aggregate (river-sand) in the manufacture of dense concrete specimens. Bone char sludge is being produced by defluoridation of contaminated groundwater in Nalagonda District, Andhra Pradesh, India. The impact of admixing 1.5-9% sludge contents on the compression strength and fluoride leaching potential of the sludge admixed concrete (SAC) specimens are examined. The compression strengths of the SAC specimensa re examined with respect to strength criteria for manufacture of dense, load-bearing concrete blocks. The fluoride release potential of the SAC specimens is examined with respect to standards specific to disposal of treated leachate into inland surface water.

The use of high resolution melting (HRM) to map single nucleotide polymorphism markers linked to a covered smut resistance gene in barley

Using an established genetic map, a single gene conditioning covered smut resistance, Ruh.7H, was mapped to the telomere region of chromosome 7HS in an Alexis/Sloop doubled haploid barley population. The closest marker to Ruh.7H, abg704 was 7.5 cM away. Thirteen loci on the distal end of 7HS with potential to contain single nucleotide polymorphisms (SNPs) were identified by applying a comparative genomics approach using rice sequence data. Of these, one locus produced polymorphic co-dominant bands of different size while two further loci contained SNPs that were identified using the recently developed high resolution melting (HRM) technique. Two of these markers flanked Ruh.7H with the proximal marker located 3.8 cM and the distal marker 2.7 cM away. This is the first report on the application of the HRM technique to SNP detection and to rapid scoring of known cleaved amplified polymorphic sequence (CAPS) markers in plants. This simple, precise post-PCR technique should find widespread use in the fine-mapping of genetic regions of interest in complex cereal and other plant genomes.

Use of optical density as a measure of Claviceps africana conidial suspension concentration

Sorghum ergot, caused by Claviceps africana, has remained a major disease problem in Australia since it was first recorded in 1996, and is the focus of a range of biological and integrated management research. Artificial inoculation using conidial suspensions is an important tool in this research. Ergot infection is greatly influenced by environmental factors, so it is important to reduce controllable sources of variation such as inoculum concentration. The use of optical density was tested as a method of quantifying conidial suspensions of C. africana, as an alternative to haemocytometer counts. This method was found to be accurate and time efficient, with possible applications in other disease systems.

Use of part records in Merino breeding programs - The inheritance of wool growth and fibre traits during different times of the year to determine their value in Merino breeding programs

Fibre diameter can vary dramatically along a wool staple, especially in the Mediterranean environment of southern Australia with its dry summers and abundance of green feed in spring. Other research results have shown a very low phenotypic correlation between fibre diameter grown between seasons. Many breeders use short staples to measure fibre diameter for breeding purposes and also to promote animals for sale. The effectiveness of this practice is determined by the relative response to selection by measuring fibre traits on a full 12 months wool staple as compared to measuring them only on part of a staple. If a high genetic correlation exists between the part record and the full record, then using part records may be acceptable to identify genetically superior animals. No information is available on the effectiveness of part records. This paper investigated whether wool growth and fibre diameter traits of Merino wool grown at different times of the year in a Mediterranean environment, are genetically the same trait, respectively. The work was carried out on about 7 dyebanded wool sections/animal.year, on ewes from weaning to hogget age, in the Katanning Merino resource flocks over 6 years. Relative clean wool growth of the different sections had very low heritability estimates of less than 0.10, and they were phenotypically and genetically poorly correlated with 6 or 12 months wool growth. This indicates that part record measurement of clean wool growth of these sections will be ineffective as indirect selection criteria to improve wool growth genetically. Staple length growth as measured by the length between dyebands, would be more effective with heritability estimates of between 0.20 and 0.30. However, these measurements were shown to have a low genetic correlation with wool grown for 12 months which implies that these staple length measurements would only be half as efficient as the wool weight for 6 or 12 months to improve total clean wool weight. Heritability estimates of fibre diameter, coefficient of variation of fibre diameter and fibre curvature were relatively high and were genetically and phenotypically highly correlated across sections. High positive phenotypic and genetic correlations were also found between fibre diameter, coefficient of variation of fibre diameter and fibre curvature of the different sections and similar measurements for wool grown over 6 or 12 months. Coefficient of variation of fibre diameter of the sections also had a moderate negative phenotypic and genetic correlation with staple strength of wool staples grown over 6 months indicating that coefficient of variation of fibre diameter of any section would be as good an indirect selection criterion to improve stable strength as coefficient of variation of fibre diameter for wool grown over 6 or 12 months. The results indicate that fibre diameter, coefficient of variation of fibre diameter and fibre curvature of wool grown over short periods of time have virtually the same heritability as that of wool grown over 12 months, and that the genetic correlation between fibre diameter, coefficient of variation of fibre diameter and fibre curvature on part and on full records is very high (rg > 0.85). This indicates that fibre diameter, coefficient of variation of fibre diameter and fibre curvature on part records can be used as selection criteria to improve these traits. However, part records of greasy and clean wool growth would be much less efficient than fleece weight for wool grown over 6 or 12 months because of the low heritability of part records and the low genetic correlation between these traits on part records and on wool grown for 12 months.

Strategic use of crutching and dicyclanil to protect unmulesed sheep against breech strike

Objective To test strategies for the application of dicyclanil and mid-season crutching to maximise protection of unmulesed sheep against breech strike. Procedure Three hundred and eighty unmulesed Merino weaners were randomly allocated to four groups either left untreated or treated by different strategies with 50 g/L dicyclanil. Treatments included breech treatment alone and breech plus body treatment, with two application times, immediately after shearing and 6 weeks after crutching or shearing. To assess protection, larval implants with newly hatched Lucilia cuprina larvae were applied to 10 different sheep from each group at 3, 4, 5 and 6 months after crutching and shearing and assessed for the development of strike at 48 hours. The concentration of dicyclanil was measured in wool samples clipped from the breeches of the test sheep. Results All dicyclanil treatments gave significant reduction in strike in comparison to controls up until 4 months after crutching but protection in the sheep treated immediately after shearing had waned at 5 months. Treating at 6 weeks after crutching provided significant reduction (P < 0.05) in strike for 6 months. Results for strike incidence immediately after shearing and concentration of dicyclanil in the breech wool also suggested improvements in protection by delaying treatment for 6 weeks. Conclusion In most environments it should be possible to protect unmulesed sheep against breech strike with a carefully planned integrated control program incorporating strategically timed crutching, shearing and dicyclanil application. Delaying treatment with dicyclanil to at least 6 weeks after shearing or crutching increased the protection provided in comparison to treatment immediately after shearing.

Use of CLIMEX modelling to identify prospective areas for exploration to find new biological control agents for prickly acacia

Selection of biocontrol agents that are adapted to the climates in areas of intended release demands a thorough analysis of the climates of the source and release sites. We present a case study that demonstrates how use of the CLIMEX software can improve decision making in relation to the identification of prospective areas for exploration for agents to control the woody weed, prickly acacia Acacia nilotica ssp. indica in the arid areas of north Queensland.

Detection and use of QTL for complex traits in multiple environments.

QTL mapping methods for complex traits are challenged by new developments in marker technology, phenotyping platforms, and breeding methods. In meeting these challenges, QTL mapping approaches will need to also acknowledge the central roles of QTL by environment interactions (QEI) and QTL by trait interactions in the expression of complex traits like yield. This paper presents an overview of mixed model QTL methodology that is suitable for many types of populations and that allows predictive modeling of QEI, both for environmental and developmental gradients. Attention is also given to multi-trait QTL models which are essential to interpret the genetic basis of trait correlations. Biophysical (crop growth) model simulations are proposed as a complement to statistical QTL mapping for the interpretation of the nature of QEI and to investigate better methods for the dissection of complex traits into component traits and their genetic controls.