A multimodality vascular imaging phantom with fiducial markers visible in DSA, CTA, MRA, and ultrasound.

The objective was to design a vascular phantom compatible with digital subtraction angiography, computerized tomography angiography, ultrasound and magnetic resonance angiography (MRA). Fiducial markers were implanted at precise known locations in the phantom to facilitate identification and orientation of plane views from three-dimensional (3-D) reconstructed images. A vascular conduit connected to tubing at the extremities of the phantom ran through an agar-based gel filling it. A vessel wall in latex was included around the conduit to avoid diffusion of contrast agents. Using a lost-material casting technique based on a low melting point metal, geometries of pathological vessels were modeled. During the experimental testing, fiducial markers were detectable in all modalities without distortion. No leak of gadolinium through the vascular wall was observed on MRA after 5 hours. Moreover, no significant deformation of the vascular conduit was noted during the fabrication process (confirmed by microtome slicing along the vessel). The potential use of the phantom for calibration, rescaling, and fusion of 3-D images obtained from the different modalities as well as its use for the evaluation of intra- and inter-modality comparative studies of imaging systems are discussed. In conclusion, the vascular phantom can allow accurate calibration of radiological imaging devices based on x-ray, magnetic resonance and ultrasound and quantitative comparisons of the geometric accuracy of the vessel lumen obtained with each of these methods on a given well defined 3-D geometry.

Selective ablation of photovoltaic materials with UV laser sources for monolithic interconnection of devices based on a-Si:H

Lasers are essential tools for cell isolation and monolithic interconnection in thin-film-silicon photovoltaic technologies. Laser ablation of transparent conductive oxides (TCOs), amorphous silicon structures and back contact removal are standard processes in industry for monolithic device interconnection. However, material ablation with minimum debris and small heat affected zone is one of the main difficulty is to achieve, to reduce costs and to improve device efficiency. In this paper we present recent results in laser ablation of photovoltaic materials using excimer and UV wavelengths of diode-pumped solid-state (DPSS) laser sources. We discuss results concerning UV ablation of different TCO and thin-film silicon (a-Si:H and nc-Si:H), focussing our study on ablation threshold measurements and process-quality assessment using advanced optical microscopy techniques. In that way we show the advantages of using UV wavelengths for minimizing the characteristic material thermal affection of laser irradiation in the ns regime at higher wavelengths. Additionally we include preliminary results of selective ablation of film on film structures irradiating from the film side (direct writing configuration) including the problem of selective ablation of ZnO films on a-Si:H layers. In that way we demonstrate the potential use of UV wavelengths of fully commercial laser sources as an alternative to standard backscribing process in device fabrication.

Glucocorticoid-induced tumor necrosis factor receptor is a p21Cip1/WAF1 transcriptional target conferring resistance of keratinocytes to UV light-induced apoptosis.

Glucocorticoid-induced tumor necrosis factor receptor (GITR) is a member of the tumor necrosis factor receptor superfamily, is expressed in T lymphocytes, and exerts an anti-apoptotic function in these cells. We reported that GITR is also highly expressed in the skin, specifically in keratinocytes, and that it is under negative transcriptional control of p21(Cip1/WAF1), independently from the cell cycle. Although GITR expression is higher in p21-deficient keratinocytes and skin, it is down-modulated with differentiation and in response to UVB. The combined analysis of keratinocytes with increased GITR expression versus normal keratinocytes and skin of mice with a disruption of the GITR gene indicates that this protein protects keratinocytes from UVB-induced apoptosis both in vitro and in vivo.

UV irradiation of human keratinocytes activates the inflammasome

Human keratinocytes represent a potent source of the pro-inflammatory cytokines pro-interleukin(IL)-1α and -β. ProIL-1β requires processing by caspase-1 (IL-1β-converting enzyme, ICE) for activation and receptor binding. ProIL-1α and -β lack a signal peptide and leave the cell via the alternative secretion pathway, which is independent of the classical ER/Golgi pathway. Both cytokines are stored in the cytoplasm and can be activated and released upon UV irradiation. In macrophages maturation of proIL-1β requires the activation of inflammasomes, innate multiprotein immune complexes, which are essential for the activation of caspase-1 and thereby for processing of proIL-1β. However, the intracellular pathways, which are responsible for activation of proIL-1β and secretion of IL-1β in keratinocytes, are unknown. We show that human keratinocytes express inflammasome proteins in vitro and in vivo. UVB irradiation of keratinocytes results in an increase of cytoplasmic Ca2+ from intracellular stores. This shift is required for inflammasome-dependent activation of caspase-1 and subsequent processing of proIL-1β and secretion of IL-1β. In contrast to macrophages, caspase-1 cannot activate proIL-18 in keratinocytes, although secretion of this cytokine is also induced by UVB irradiation. In vivo, caspase-1 is also essential for UVB-induced inflammation in the skin, since caspase-1 knockout mice showed a strongly reduced inflammatory response after UVB irradiation. Our results suggest that keratinocytes are important immuno-competent cells under physiological and pathological conditions.

Água aquecida e radiação UV-C no controle pós-colheita de Cryptosporiopsis perennans em maçãs

O objetivo deste trabalho foi avaliar a colonização de Cryptosporiopsis perennans na epiderme de maçãs e a eficiência da aplicação de água aquecida e radiação UV-C no controle desse patógeno. Em maçãs submetidas à inoculação de C. perennans, a colonização de lenticelas e das áreas adjacentes pelo patógeno foi avaliada por microscopia eletrônica de varredura. A sensibilidade dos conídios de C. perennans aos tratamentos foi avaliada em suspensão aquosa, às temperaturas de 28, 45, 50 e 55ºC, por 15 e 30 s, e às doses de radiação UV-C de 0,018, 0,037, 0,075, 0,150, 0,375, 0,750, 1,500 e 3,000 kJ m-2. Em maçãs submetidas à inoculação de C. perennans, foram avaliados os efeitos de 0,375, 0,750 e 1,500 kJ m-2 de radiação UV-C e da aspersão de água aquecida à 50ºC, por 15 e 30 s no controle do patógeno. O fungo produziu abundante micélio e conídios nas lenticelas e nas áreas adjacentes, na epiderme das maçãs. A água aquecida a 50ºC por 15 s e à dose de radiação de UV-C de 0,750 kJ m-2 reduzem em mais de 99% a sobrevivência de conídios. A aspersão de água aquecida a 50ºC por 15 s e à dose de radiação de UV-C de 0,375 kJ m-2, controlam C. perennans em maçãs.

Sulpun kuvantaminen painelajittelussa

Painelajittelussa sellusta poistetaan epäpuhtauksia. Painelajittimien suunnittelussa on tärkeää ymmärtää lajittimessa tapahtuvia ilmiöitä. Työn tavoitteena oli kehittää kuvaamiseen perustuva mittausjärjestelmä kuitujen liikkeiden mittaamista varten. Mittauksen kohteena ovat sellusulpun kuitujen ja epäpuhtauksien nopeudet. Kuvaamisessa käytetyllä kaksoisvalotuksella pystytään mittaamaan kuitujen ja roskien nopeuksia. Nopeuksien mittaamiseen kuvista kehitettiin järjestelmä ja tutkittiin mahdollisuutta automatisoida mittaaminen. Yksittäisten kuitujen havaitsemiseen sellumassasta käytettiin optisella kirkasteella kirkastettuja kuituja ja UV-valoa. Kuituja värjättiin myös mustiksi ja kuvattiin näkyvällä valolla. Kaksoisvalotukseen käytettiin kahta stroboskooppia. Prosessin kuvaamisessa käytettiin ulkoisella herätteellä ohjattavaa kameraa. Kuvan tuomiseen kameralle ja kohteen valaistukseen käytettiin boroskooppia. Saatujen kuvien käsittelyä ja nopeuksien mittausta varten tehtiin tietokoneohjelma. Käytetyn boroskoopin valovoima ei ollut riittävä kuvausten suorittamiseen, mutta muilta osin laitteisto havaittiin toimivaksi. Kuitujen ja roskien nopeuksia pystyttiin laskemaan ohjelmalla kuvista, joita otettiin ilman boroskooppia. Mittaustiedon hankinnan automatisointi näyttää mahdolliselta tekemällä muutoksia kuvauslaitteistoon.

Occupational UV exposure in French outdoor workers.

OBJECTIVES: Occupational ultraviolet (UV) exposure was evaluated in a population-based sample in France. METHODS: A random survey was conducted in 2012 in individuals aged 25 to 69 years. The median daily standard erythemal UV dose (SED) was estimated from exposure time and place and matched to satellite UV records. RESULTS: A total of 889 individuals were exposed to solar UV with highest doses observed among gardeners (1.19 SED), construction workers (1.13 SED), agricultural workers (0.95 SED), and culture/art/social science workers (0.92 SED). Information and communication technology, industry, and transport workers were highly exposed (>0.70 SED). Significant factors associated with high occupational UV exposure were sex (P < 0.0001), phototype (P = 0.0003), and taking lunch outdoors (P < 0.0001). CONCLUSIONS: This study identified not only expected occupations with high UV exposure but also unexpected occupations with high exposures. This could serve as a basis for future prevention.

Tratamentos hidrotérmico e com radiação UV-C no controle pós-colheita da podridão olho-de-boi em uma linha comercial de seleção de maçãs

Avaliaram-se os efeitos da aspersão hidrotérmica e da radiação UV-C no controle pós-colheita da podridão olho-de-boi (POB) em maçãs 'Fuji', após um e oito meses de armazenamento, e 'Gala', após cinco meses de armazenamento, ambas sob condição de atmosfera controlada (AC). Esses frutos foram inoculados ou mantidos com infecção natural de Cryptosporiopsis perennans. As maçãs 'Fuji' foram submetidas aos seguintes tratamentos, aplicados em uma linha comercial de seleção: sem tratamento (testemunha); aspersão hidrotérmica (água a 50ºC por 12 segundos); radiação UV-C (0,0069 kJ m-2); e aspersão hidrotérmica + radiação UV-C. As maçãs 'Gala' também foram submetidas a estes tratamentos utilizados em 'Fuji', exceto ao tratamento com aspersão hidrotérmica + radiação UV-C. Após os tratamentos, as maçãs foram incubadas a 22ºC por 15 dias e avaliadas quanto à incidência da doença. Nas maçãs 'Fuji', os tratamentos de aspersão hidrotérmica e/ou radiação UV-C reduziram a incidência da POB nos frutos inoculados e com infecção natural, proporcionando controle superior a 56% e 54%, em relação à testemunha, respectivamente. Em maçãs 'Gala' inoculadas, os tratamentos com aspersão hidrotérmica e radiação UV-C também reduziram o número de unidades formadoras de colônias (UFC) nos frutos, com controle superior a 70%, e a incidência da POB, com controle superior a 69% em relação à testemunha. Em maçãs 'Gala', com infecção natural, estes tratamentos apresentaram controle da POB superior a 85% em relação à testemunha. Os resultados obtidos mostram que os tratamentos com aspersão hidrotérmica e/ou radiação UV-C reduzem a incidência da POB em maçãs 'Fuji' e 'Gala', em linha comercial de seleção. Todavia, o uso da radiação UV-C, em ambas as cultivares, foi o tratamento que apresentou maior benefício e retorno econômico.

ZnO nanorods for efficient third harmonic UV generation.

ZnO nanorods grown by both high temperature vapour phase transport and low temperature chemical bath deposition are very promising sources for UV third harmonic generation. Material grown by both methods show comparable efficiencies, in both cases an order of magnitude higher than surface third harmonic generation at the quartz-air interface of a bare quartz substrate. This result is in stark contrast to the linear optical properties of ZnO nanorods grown by these two methods, which show vastly different PL efficiencies. The third harmonic generated signal is analysed using intensity dependent measurements and interferometric frequency resolved optical gating, allowing extraction of the laser pulse parameters. The comparable levels of efficiency of ZnO grown by these very different methods as sources for third harmonic UV generation provides a broad suite of possible growth methods to suit various substrates, coverage and scalability requirements. Potential application areas range from interferometric frequency resolved optical gating characterization of few cycle fs pulses to single cell UV irradiation for biophysical studies.

Fenólicos totais, polifenoloxidade e coloração em abacate 'Hass' submetido a radiação UV-C

Avaliou-se o efeito da radiação UV-C em abacates Hass, quanto ao conteúdo de fenólicos totais, atividade da enzima polifenoloxidase (PPO) e coloração. Os frutos selecionados foram submetidos à radiação em luz UV-C durante 5; 10; 15 e 20 minutos, sendo mantidos sob refrigeração (10 ± 1 ºC e 90±5% UR), e avaliados durante 15 dias. Para o teor fenólicos totais e PPO, não se observou diferença entre os tratamentos dos frutos nos diferentes tempos de exposição à luz UV-C. Os teores fenólicos totais e PPO diminuíram durante o período experimental. Os valores de luminosidade mantiveram-se elevados (85,4 a 88,5) no armazenamento. Os valores de cor a* e b* diminuíram com o armazenamento de forma mais intensa para os frutos submetidos à radiação UV-C. Não houve correlação significativa para a PPO, conteúdo de fenólicos totais e coloração.

Painatuksen UV-stabiilisuuden optimointi fenolihartsatussa paperissa

Tässä diplomityössä tutkittiin painetun paperin ja siitä fenoliformaldehydihartsilla impregnoimalla valmistetun pinnoituskalvon UV-stabiilisuuden parantamis-mahdollisuuksia. Työn kirjallisuusosassa käsitellään painetun pinnoituskalvon valmistusprosessia ja painatuksen UV-valonkestoon vaikuttavia tekijöitä. Painovärin pigmentti, sen määrä ja käsittely, painovärin sideaine sekä fenoliformaldehydihartsi ja sen lisäaineet vaikuttavat pinnoitetun betonoimisvanerin säänkesto-ominaisuuksiin. Erilaisilla epäorgaanisilla valkoisilla pigmenteillä ja kidemuodoilla on erilainen UV-valonkesto ja taitekerroin. Päällystämällä titaanidioksidi esimerkiksi alumiini- tai zirkoniumoksideilla sen UV-valonkestoa voidaan parantaa merkittävästi. UV-hajoaminen voidaan havaita painetun pinnoitteen liituuntumisena. Liituuntumista voidaan pitää veden ja hapen välisenä reaktiona, jota titaanidioksidi ja UV-säteily katalysoivat. Sen takia myös muiden valkoisten epäorgaanisten pigmenttien ominaisuuksia ja käyttöä selvitettiin. Kokeissa käytettiin yhdeksää eri painoväriä, kahta eri paksuista paperia ja kahta eri tyyppistä hartsia. Painovärejä ohennettiin vedellä ja paperin painopuolta vaihdeltiin. Kaikissa painatuksissa käytettiin kolmea eri rasterointiasteen laattaa, jolloin painovärin määrää paperissa saatiin vähennettyä. Painetuista papereista mitattiin densiteetti, värimäärä, pisara-absorptio vedellä ja kontaktikulma hartsilla. Myös painovärin tunkeumaa selvitettiin paperin poikkileikeistä tehtyjen SEM-kuvien avulla. Painetut paperit impregnoitiin fenoliformaldehydihartsilla kalvoksi. Pinnoituskalvot puristettiin vanerin pinnalle laboratoriopuristimella. Koekappaleet altistettiin UV-valolle, sateelle ja pakkaselle sääkaapissa 400 h ajan, mikä vastaa noin 1,5 vuotta ulkona Suomen oloissa. Kappaleista mitattiin kiilto, värinmuutos ja liituuntuminen. Pinnoitteen liituuntumista tapahtui vähiten niissä koepisteissä, joissa painatus oli tehty 30 % rasteroidulla laatallaSäänkestävä TiO2 osoittautui hyväksi, mutta myös ZnO-pigmentillä saatiin hyviä tuloksia. ZnO-koepisteessä liituuntumisreaktio ei ole niin voimakkaasti katalysoitu kuin TiO2-koepisteissä. Paksun paperin painatuspuolella näytti olevan merkitystä säänkestoon. Huopapuolelle painettuna pinnoitteen liituuntuminen oli vähäisempää

Photocontrolled DNA Binding of a Receptor-Targeted Organometallic Ruthenium(II) Complex

A photoactivated ruthenium(II) arene complex has been conjugated to two receptor-binding peptides, a dicarba analogue of octreotide and the Arg-Gly-Asp (RGD) tripeptide. These peptides can act as"tumor-targeting devices" since their receptors are overexpressed on the membranes of tumor cells. Both ruthenium-peptide conjugates are stable in aqueous solution in the dark, but upon irradiation with visible light, the pyridyl-derivatized peptides were selectively photodissociated from the ruthenium complex, as inferred by UV-vis and NMR spectroscopy. Importantly, the reactive aqua species generated from the conjugates, [(η6-p-cym)Ru(bpm)(H2O)]2+, reacted with the model DNA nucleobase 9-ethylguanine as well as with guanines of two DNA sequences, 5′dCATGGCT and 5′dAGCCATG. Interestingly, when irradiation was performed in the presence of the oligonucleotides, a new ruthenium adduct involving both guanines was formed as a consequence of the photodriven loss of p-cymene from the two monofunctional adducts. The release of the arene ligand and the formation of a ruthenated product with a multidentate binding mode might have important implications for the biological activity of such photoactivated ruthenium(II) arene complexes. Finally, photoreactions with the peptide-oligonucleotide hybrid, Phac-His-Gly-Met-linker-p5′dCATGGCT, also led to arene release and to guanine adducts, including a GG chelate. The lack of interaction with the peptide fragment confirms the preference of such organometallic ruthenium(II) complexes for guanine over other potential biological ligands, such as histidine or methionine amino acids.