963 resultados para UNIFORMITY


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Purpose: To determine differences in overall tumor responses measured by volumetric assessment and bioluminescence imaging (BLI) following exposure to uniform and non-uniform radiation fields in an ectopic prostate tumor model.

Materials and methods: Bioluminescent human prostate tumor xenografts were established by subcutaneous implantation into male mice. Tumors were irradiated with uniform or non-uniform field configurations using conventional in vivo irradiation procedures performed using a 225 kVp generator with custom lead shielding. Tumor responses were measured using Vernier calipers and by BLI using an in vivo imaging system. Survival was defined as the time to quadroupling of pre-treatment tumor volume. 

Results: The correlation between BLI and tumor volume measurements was found to be different for un-irradiated (R = 0.61), uniformly irradiated (R = 0.34) and partially irradiated (R = 0.30) tumors. Uniformly irradiated tumors resulted in an average tumor growth delay of 60 days with median survival of 75 days, compared to partially irradiated tumors which showed an average growth delay of 24 days and median survival of 38 days. 

Conclusions: Correlation between BLI and tumor volume measurements is lower for partially irradiated tumors than those exposed to uniform dose distributions. The response of partially irradiated tumors suggests non-uniformity in response beyond physical dose distribution within the target volume. Dosimetric uncertainty associated with conventional in vivo irradiation procedures prohibits their ability to accurately determine tumor response to non-uniform radiation fields and stresses the need for image guided small animal radiation research platforms.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The equiprobability bias (EB) is a tendency to believe that every process in which randomness is involved corresponds to a fair distribution, with equal probabilities for any possible outcome. The EB is known to affect both children and adults, and to increase with probability education. Because it results in probability errors resistant to pedagogical interventions, it has been described as a deep misconception about randomness: the erroneous belief that randomness implies uniformity. In the present paper, we show that the EB is actually not the result of a conceptual error about the definition of randomness. On the contrary, the mathematical theory of randomness does imply uniformity. However, the EB is still a bias, because people tend to assume uniformity even in the case of events that are not random. The pervasiveness of the EB reveals a paradox: The combination of random processes is not necessarily random. The link between the EB and this paradox is discussed, and suggestions are made regarding educational design to overcome difficulties encountered by students as a consequence of the EB.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Biases in preservation shape the fossil record, and therefore impact on our reconstructions of past environments and biodiversity. Given the intensive recent research in the general fields of taphonomy and exceptional preservation, surprisingly, fundamental questions remain unanswered about species-level variation in skeletal preservation potential at low taxonomic levels (e.g. between genera from the same family, or between taxa from related families) across myriad groups with multi-element skeletons. Polyplacophoran molluscs (chitons sensu lato) are known from the late Cambrian to Recent, and possess a distinctive articulated scleritome consisting of eight overlapping calcareous valves. The apparent uniformity of living chitons presents an ideal model to test the potential for taphonomic biases at the alpha-taxon level. The vast majority of fossil chitons are preserved as single valves; few exhibit body preservation or even an articulated shell series. An experimental taphonomic programme was conducted using the Recent polyplacophorans Lepidochitona cinerea and Tonicella marmorea (suborder Chitonina) and Acanthochitona crinita (Acanthochitonina). Experiments in a rock tumbler on disarticulated valves found differential resistance to abrasion between taxa; in one experiment 53.8-61.5% of Lepidochitona valves were recovered but 92% of those from Tonicella and 100% of elements from Acanthochitona. Chiton valves and even partly decayed carcasses are more resistant to transportation than their limited fossil record implies. Different species of living chitons have distinctly different preservation potential. This, problematically, does not correlate with obvious differences in gross valve morphology; some, but not all, of the differences correlate with phylogeny. Decay alone is sufficient to exacerbate differences in preservation potential of multi-element skeletons; some, but not all, of the variation that results is due to specimen size and the fidelity of the fossil record will thus vary intra-specifically (e.g. between ontogenetic stages) as well as inter-specifically. 

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Article 4(2) TEU requires that the European Union (EU) respect the Member States’ national identities, creating a legal obligation enforceable before the CJEU and valuable in political negotiations. However, the concept of national identities is unclear, leaving open questions about the scope or parameters of the provision and its applicability. The CJEU appears likely to take a relatively flexible approach in light of Article 4(2) TEU’s relationship with national constitutional courts’ reserves. This flexible approach would enable Member States to rely upon a range of aspects as part of their national identity, including ones that were previously unidentified. This is a crucial feature if one considers that national identities may evolve gradually or even dramatically, including where Member States purposefully attempt to develop their national identities further. This possibility of an evolved national identity is exemplified by the French Charte de l’Environnement. It may thereby be possible for Member States to stretch the scope and application of Article 4(2) TEU through reference to these evolving national identities. This potential raises significant challenges for the EU regarding the management of Article 4(2) TEU, which it will need to address if it wishes to ensure harmonisation and uniformity in the relevant areas.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Context. The jets of compact accreting objects are composed of electrons and a mixture of positrons and ions. These outflows impinge on the interstellar or intergalactic medium and both plasmas interact via collisionless processes. Filamentation (beam-Weibel) instabilities give rise to the growth of strong electromagnetic fields. These fields thermalize the interpenetrating plasmas. 

Aims. Hitherto, the effects imposed by a spatial non-uniformity on filamentation instabilities have remained unexplored. We examine the interaction between spatially uniform background electrons and a minuscule cloud of electrons and positrons. The cloud size is comparable to that created in recent laboratory experiments and such clouds may exist close to internal and external shocks of leptonic jets. The purpose of our study is to determine the prevalent instabilities, their ability to generate electromagnetic fields and the mechanism, by which the lepton micro-cloud transfers energy to the background plasma. 

Methods. A square micro-cloud of equally dense electrons and positrons impinges in our particle-in-cell (PIC) simulation on a spatially uniform plasma at rest. The latter consists of electrons with a temperature of 1 keV and immobile ions. The initially charge- and current neutral micro-cloud has a temperature of 100 keV and a side length of 2.5 plasma skin depths of the micro-cloud. The side length is given in the reference frame of the background plasma. The mean speed of the micro-cloud corresponds to a relativistic factor of 15, which is relevant for laboratory experiments and for relativistic astrophysical outflows. The spatial distributions of the leptons and of the electromagnetic fields are examined at several times. 

Results. A filamentation instability develops between the magnetic field carried by the micro-cloud and the background electrons. The electromagnetic fields, which grow from noise levels, redistribute the electrons and positrons within the cloud, which boosts the peak magnetic field amplitude. The current density and the moduli of the electromagnetic fields grow aperiodically in time and steadily along the direction that is anti-parallel to the cloud's velocity vector. The micro-cloud remains conjoined during the simulation. The instability induces an electrostatic wakefield in the background plasma. 

Conclusions. Relativistic clouds of leptons can generate and amplify magnetic fields even if they have a microscopic size, which implies that the underlying processes can be studied in the laboratory. The interaction of the localized magnetic field and high-energy leptons will give rise to synchrotron jitter radiation. The wakefield in the background plasma dissipates the kinetic energy of the lepton cloud. Even the fastest lepton micro-clouds can be slowed down by this collisionless mechanism. Moderately fast charge- and current neutralized lepton micro-clouds will deposit their energy close to relativistic shocks and hence they do not constitute an energy loss mechanism for the shock.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Polymer extrusion is fundamental to the processing of polymeric materials and melt flow temperature homogeneity is a major factor which influences product quality. Undesirable thermal conditions can cause problems such as melt degradation, dimensional instability, weaknesses in mechanical/optical/geometrical properties, and so forth. It has been revealed that melt temperature varies with time and with radial position across the die. However, the majority of polymer processes use only single-point techniques whose thermal measurements are limited to the single point at which they are fixed. Therefore, it is impossible for such techniques to determine thermal homogeneity across the melt flow. In this work, an extensive investigation was carried out into melt flow thermal behavior of the output of a single extruder with different polymers and screw geometries over a wide range of processing conditions. Melt temperature profiles of the process output were observed using a thermocouple mesh placed in the flow and results confirmed that the melt flow thermal behavior is different at different radial positions. The uniformity of temperature across the melt flow deteriorated considerably with increase in screw rotational speed while it was also shown to be dependent on process settings, screw geometry, and material properties. Moreover, it appears that the effects of the material, machine, and process settings on the quantity and quality of the process output are heavily coupled with each other and this may cause the process to be difficult to predict and variable in nature

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Perfect information is seldom available to man or machines due to uncertainties inherent in real world problems. Uncertainties in geographic information systems (GIS) stem from either vague/ambiguous or imprecise/inaccurate/incomplete information and it is necessary for GIS to develop tools and techniques to manage these uncertainties. There is a widespread agreement in the GIS community that although GIS has the potential to support a wide range of spatial data analysis problems, this potential is often hindered by the lack of consistency and uniformity. Uncertainties come in many shapes and forms, and processing uncertain spatial data requires a practical taxonomy to aid decision makers in choosing the most suitable data modeling and analysis method. In this paper, we: (1) review important developments in handling uncertainties when working with spatial data and GIS applications; (2) propose a taxonomy of models for dealing with uncertainties in GIS; and (3) identify current challenges and future research directions in spatial data analysis and GIS for managing uncertainties.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Bone tissue engineering may provide an alternative to autograft, however scaffold optimisation is required to maximize bone ingrowth. In designing scaffolds, pore architecture is important and there is evidence that cells prefer a degree of non-uniformity. The aim of this study was to compare scaffolds derived from a natural porous marine sponge (Spongia agaricina) with unique architecture to those derived from a synthetic polyurethane foam. Hydroxyapatite scaffolds of 1 cm3 were prepared via ceramic infiltration of a marine sponge and a polyurethane (PU) foam. Human foetal osteoblasts (hFOB) were seeded at 1x105 cells/scaffold for up to 14 days. Cytotoxicity, cell number, morphology and differentiation were investigated. PU-derived scaffolds had 84-91% porosity and 99.99% pore interconnectivity. In comparison marine sponge-derived scaffolds had 56-61% porosity and 99.9% pore interconnectivity. hFOB studies showed that a greater number of cells were found on marine sponge-derived scaffolds at than on the PU scaffold but there was no significant difference in cell differentiation. X-ray diffraction (XRD) and inductively coupled plasma mass spectrometry (ICP-MS) showed that Si ions were released from the marine-derived scaffold. In summary, three dimensional porous constructs have been manufactured that support cell attachment, proliferation and differentiation but significantly more cells were seen on marine-derived scaffolds. This could be due both to the chemistry and pore architecture of the scaffolds with an additional biological stimulus from presence of Si ions. Further in vivo tests in orthotopic models are required but this marine-derived scaffold shows promise for applications in bone tissue engineering.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Pretendemos com este estudo caracterizar os sem abrigo, as suas redes e relações sociais, bem como os modelos de intervenção, de forma a que se possa ter um maior conhecimento acerca desta problemática. Para a consecução destes propósitos, foram delineados os seguintes objectivos: caracterizar a população sem abrigo em termos de variáveis sócio-demográficas; identificar a sua rede social de apoio; caracterizar as dimensões sociais associadas à vinculação adulta nos sem abrigo; caracterizar a incidência de psicopatologia nesta população; analisar o seu bem estar psicológico; caracterizar os acontecimentos de vida stressantes que contribuem para a emergência desta problemática. Para atingir estes objectivos foram realizados dois estudos, um de carácter quantitativo e um segundo de carácter qualitativo. Participaram 225 indivíduos (105 sem abrigo e 120 pessoas carenciadas) garantindo a homogeneidade nas variáveis sexo e idade. A média de idades da amostra total (n= 225) é de 38 anos, sendo que a maioria dos sujeitos desta investigação pertence ao sexo masculino (78,5%). O grupo dos sem abrigo foi recolhido em duas comunidades de inserção, na zona centro do país, sendo importante destacar que todos nesta fase têm apoio residencial, satisfação das necessidades básicas, acompanhamento social e psicológico, bem como, projectos de inserção em curso. O protocolo de recolha de informação inclui dados pessoais, a versão portuguesa da (ASQ)-Questionário de Estilos de Vinculação nos Sem Abrigo (QEVSA), da escala de ocorrência de acontecimentos de vida stressantes relacionados com o surgimento do primeiro episódio de sem abrigo (EAVSSA), do Questionário de Morbilidade Psiquiátrica em Adultos (QMPA), do Medical Outcomes Study’s social support scale (MOS-SSS-P), a escala de medida de manifestação de bem-estar psicológico (EMMBEP), o programa de intervenção da CINO e uma entrevista estruturada utilizada no estudo qualitativo. Os principais resultados são: a) o perfil de sem abrigo encontrado é maioritariamente homem, em média com 39 anos, solteiro ou divorciado, com 1 filho, 2.º ciclo de escolaridade, desempregado e português; b) maioria viveu na rua mais de um ano, está na instituição há menos de meio ano, não teve nos últimos seis meses consumo de substâncias (álcool e drogas), frequenta consultas (saúde mental e toxicodependência), toma medicação (terapêutica de substituição e neurolépticos), afirma não ter comportamentos de risco, e na maioria têm patologia infecciosa (HIV ou hepatite c), tendo cerca de 40% estado detidos; c) a problemática dos sem abrigo é um fenómeno multicausal apontando como principais factores o conflito familiar, o desemprego e problemas de saúde; d) em termos de vinculação população sem abrigo parece corresponder a indivíduos com vinculação insegura, denotando uma falta de confiança generalizada; e) em termos de bem estar psicológico a média foi significativamente superior no grupo de pessoas carenciadas, quando comparado com o grupo dos sem abrigo; f) no que toca à saúde mental constatamos que 80% dos sem abrigo e 42.5% das pessoas carenciadas são portadores de transtorno mental; g) no que concerne ao apoio social os sem abrigo referem menor suporte social (apoio emocional, afectivo, instrumental e menor interacção social positiva) que as pessoas carenciadas; h) os sem abrigo têm menos familiares e amigos íntimos; i) os resultados do estudo qualitativo indicam que o programa de intervenção da CINO, parece contribuir para a emergência de uma rede social estável, activa, acessível e integrada que se constitui como um sistema salutogénico para o indivíduo, diminuindo o uso dos serviços. Parece ainda eficaz aos olhos dos próprios e destacam como factor fundamental a sua participação activa no mesmo, a importância de rotinas organizadoras, de espaços de terapia de grupo e a existência de equipa multidisciplinar. Destacam ainda como positivo o facto de existir um primeiro período de regime fechado como estratégia de prevenção de recaída, um programa faseado de aquisição de responsabilidades e autonomia, acesso a emprego no exterior da comunidade e o follow-up pós autonomização. Como implicação deste trabalho salienta-se a produção de conhecimentos acerca da realidade dos sem abrigo na região centro do país e de estratégias de intervenção.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The development of a compact gamma camera with high spatial resolution is of great interest in Nuclear Medicine as a means to increase the sensitivity of scintigraphy exams and thus allow the early detection of small tumours. Following the introduction of the wavelength-shifting fibre (WSF) gamma camera by Soares et al. and evolution of photodiodes into highly sensitive silicon photomultipliers (SiPMs), this thesis explores the development of a WSF gamma camera using SiPMs to obtain the position information of scintillation events in a continuous CsI(Na) crystal. The design is highly flexible, allowing the coverage of different areas and the development of compact cameras, with very small dead areas at the edges. After initial studies which confirmed the feasibility of applying SiPMs, a prototype with 5 5 cm2 was assembled and tested at room temperature, in an active field-of-view of 10 10 mm2. Calibration and characterisation of intrinsic properties of this prototype were done using 57Co, while extrinsic measurements were performed using a high-resolution parallel-hole collimator and 99mTc. In addition, a small mouse injected with a radiopharmaceutical was imaged with the developed prototype. Results confirm the great potential of SiPMs when applied in a WSF gamma camera, achieving spatial resolution performance superior to the traditional Anger camera. Furthermore, performance can be improved by an optimisation of experimental conditions, in order to minimise and control the undesirable effects of thermal noise and non-uniformity of response of multiple SiPMs. The development and partial characterisation of a larger SiPM WSF gamma camera with 10 10 cm2 for clinical application are also presented.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

When developmental vernacular practice is telescoped into industrial activity, the role played by construction workers in the honing of a craft is rapidly bypassed. An almost political act is required to maintain the contribution that the hand makes to the uniformity of result that is demanded by the standard classification of typologies of building and technique. Research into fabric formwork techniques conducted by Alan Chandler utilises the flexibility of the concrete mould to explore the meaning of the making ‘process’ and the workers’ role in relation to the formal ‘result’. Chandler’s ‘Wall One’ exemplifies the exploratory prototype and its potential for variety and the trace of the hand in making. The shift to a mass production typology involved in realising the 325,000 square-metre Heatherwick studio project in Shanghai, presented the problem of how to orchestrate the fabric into a fully industrialised process. Part of the research then became how to make the shift from play to profit - and can anything of craft survive the transition into the international development marketplace? Through managing the inherent variety available to the fabric itself, a fabric based formwork solution for realising a building at the scale of a landscape offered the Chinese form work maker the opportunity to be present within the results of a fully industrialised process – a ghost in the machine.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Tese de mestrado integrado em Engenharia Biomédica e Biofísica, apresentada à Universidade de Lisboa, através da Faculdade de Ciências, 2014

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This paper is a contribution for the assessment and comparison of magnet properties based on magnetic field characteristics particularly concerning the magnetic induction uniformity in the air gaps. For this aim, a solver was developed and implemented to determine the magnetic field of a magnetic core to be used in Fast Field Cycling (FFC) Nuclear Magnetic Resonance (NMR) relaxometry. The electromagnetic field computation is based on a 2D finite-element method (FEM) using both the scalar and the vector potential formulation. Results for the magnetic field lines and the magnetic induction vector in the air gap are presented. The target magnetic induction is 0.2 T, which is a typical requirement of the FFC NMR technique, which can be achieved with a magnetic core based on permanent magnets or coils. In addition, this application requires high magnetic induction uniformity. To achieve this goal, a solution including superconducting pieces is analyzed. Results are compared with a different FEM program.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Mestrado em Computação e Instrumentação Médica

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Química