Genetic analysis on accumulated productivity and calving intervals in Nelore cattle

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

A novel single-phase ZCS-PWM high power factor boost rectifier

This paper presents a novel single-phase high power factor PWM boost rectifier, featuring soft commutation of the active switches at zero-current (ZCS). It incorporates the most desirable properties of the conventional PWM and the soft-switching resonant techniques. The input current shaping is achieved with average current mode control, and continuous inductor current mode. This new PWM converter provides ZCS turn-on and turn-off of the active switches, and it is suitable for high power applications employing IGBTs. Principle of operation, theoretical analysis, a design example, and experimental results from a laboratory prototype rated at 1600 W with 400 Vdc output voltage are presented. The measured efficiency and power factor were 96.2% and 0.99 respectively, with an input current THD equal to 3.94%, for an input voltage THD equal to 3.8%, at rated load.

Ultra-precision face grinding with constant pressure, lapping kinematics, and SiC grinding wheels dressed with overlap factor

Several machining processes have been created and improved in order to achieve the best results ever accomplished in hard and difficult to machine materials. Some of these abrasive manufacturing processes emerging on the science frontier can be defined as ultra-precision grinding. For finishing flat surfaces, researchers have been putting together the main advantages of traditional abrasive processes such as face grinding with constant pressure, fixed abrasives for two-body removal mechanism, total contact of the part with the tool, and lapping kinematics as well as some specific operations to keep grinding wheel sharpness and form. In the present work, both U d-lap grinding process and its machine tool were studied aiming nanometric finishing on flat metallic surfaces. Such hypothesis was investigated on AISI 420 stainless steel workpieces U d-lap ground with different values of overlap factor on dressing (Ud=1, 3, and 5) and grit sizes of conventional grinding wheels (silicon carbide (SiC)=#800, #600, and #300) applying a new machine tool especially designed and built for such finishing. The best results, obtained after 10 min of machining, were average surface roughness (Ra) of 1.92 nm, 1.19-μm flatness deviation of 25.4-mm-diameter workpieces, and mirrored surface finishing. Given the surface quality achieved, the U d-lap grinding process can be included among the ultra-precision abrasive processes and, depending on the application, the chaining steps of grinding, lapping, and polishing can be replaced by the proposed abrasive process.

Reatividade e tolerância ao calor de fêmeas ovinas de diferentes grupos genéticos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Produtividade total dos fatores na agricultura: uma análise da região de Ribeirão Preto

O objetivo da seguinte pesquisa é analisar a diversidade e o desempenho do EDR (Escritório de Desenvolvimento Rural) da região de Ribeirão Preto nos períodos recentes, de 1995/1996 e 2007/2008, por meio do cálculo da PTF (Produtividade Total de Fatores), a partir dos dados obtidos no IEA (Instituto Econômico Agrícola) e no LUPA (Levantamento das Unidades de Produção Agropecuária)

Manejo de minimelancia cultivada em fibra da casca de coco, sob ambiente protegido

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Manejo de minimelancia cultivada em fibra da casca de coco, sob ambiente protegido

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

In Patients With Acute Myocardial Infarction, the Impact of Hyperglycemia as a Risk Factor for Mortality Is Not Homogeneous Across Age-Groups

OBJECTIVE To assess the impact of hyperglycemia in different age-groups of patients with acute myocardial infarction (AM I). RESEARCH DESIGN AND METHODS A total of 2,027 patients with AMI were categorized into one of five age-groups: <50 years (n = 301), >= 50 and <60 (n = 477),>= 60 and <70 (n = 545), >= 70 and <80 (n = 495), and years (n = 209). Hyperglycemia was defined as initial glucose >= 115 mg/dL. RESULTS The adjusted odds ratios for hyperglycemia predicting hospital mortality in groups 1-5 were, respectively, 7.57 (P = 0.004), 3.21 (P 0.046), 3.50 (P = 0.003), 3.20 (P < 0.001.), and 2.16 (P = 0.021). The adjusted P values for correlation between glucose level (as a continuous variable) and mortality were 0.007, <0.001, 0.043, <0.001, and 0.064. The areas under the ROC curves (AUCs) were 0.785, 0.709, 0.657, 0.648, and 0.613. The AUC in group 1 was significantly higher than those in groups 3-5. CONCLUSIONS The impact of hyperglycemia as a risk factor for hospital mortality in AMI is more pronounced in younger patients.

Arthrospira (Spirulina) platensis cultivation in tubular photobioreactor: Use of no-cost CO2 from ethanol fermentation

The present study aimed at evaluating the production of Arthrospira platensis in tubular photobioreactor using CO2 from ethanol fermentation. The results of these cultivations were compared to those obtained using CO2 from cylinder at different protocols of simultaneous ammonium sulfate and sodium nitrate feeding. Maximum cell concentration (X-m), cell productivity (P-x), nitrogen-to-cell conversion factor (Y-X/N), and biomass composition (total lipids and proteins) were selected as responses and evaluated by analysis of variance. The source of CO2 did not exert any significant statistical influence on these responses, which means that the flue gas from ethanol fermentation could successfully be used as a carbon source as well as to control the medium pH, thus contributing to reduce the greenhouse effect. The results taken as a whole demonstrated that the best combination of responses mean values (X-m = 4.543 g L-1; P-x = 0.460 g L-1 d(-1); Y-X/N = 15.6 g g(-1); total lipids = 8.39%; total proteins = 18.7%) was obtained using as nitrogen source a mixture of 25% NaNO3 and 75% (NH4)(2)SO4, both expressed as nitrogen. (C) 2011 Elsevier Ltd. All rights reserved.

Lyophilized bovine colostrum as a source of immunoglobulins and insulin-like growth factor for newborn goat kids

The objective of this study was to evaluate lyophilized bovine colostrum as an alternative source of passive immunity and insulin like growth factor I (IGF-I) for goat kids, considering newborns consuming non-maternal colostrum. Twenty-nine male newborns received 5% of body weight of lyophilized bovine (LBC) or goat colostrum (GC), both with 55 mg/mL of IgG, at 0, 7 and 14 h of life. Blood samples were collected at 0, 7, 14, 18, 24, 36, 48, 72 and 96 h of life to determine serum IgG, total protein (TP), IGF-I and apparent efficiency of IgG absorption at 7, 14, 18 and 24 h (AEA(7hr), AEA(14hr), AEA(18hr), AEA(total), respectively). In LBC, the values of serum IgG at 14, 18,24 and 48 h (13.1, 13.4, 14.1 and 14.6 mg/mL, respectively) were higher than the values at 0 and 7 h (0.04 and 6.9 mg/mL, respectively). In GC, the serum IgG at 18 h (9.3 mg/mL) was higher than the value at 7 h (5.5 mg/mL). AEA(7hr) and AEA(14hr) in LBC were the same (19.2 and 18.5%, respectively, P>0.05) and the values of AEA(18hr) and AEA(total), 9.3 and 9.5%, respectively, were equal and smaller than AEA(7hr), and AEA(14hr). In GC, AEA(7hr), 20.8%, was higher than AEA(14hr), 16.1% (P<0.05) and AEA(18hr), and AEA(total), 9.2 and 8.0%, respectively, were equal and smaller than AEA(7hr) and AEA(14hr). The serum TP and IGF-I were not affected by colostrum feeding. Considering the variables study in the present work, lyophilized bovine colostrum constitutes a promising alternative substitute to goat colostrum in newborn goat kids, since the supply of immunoglobulins and IGF-I was suitable for the kids. (c) 2012 Elsevier B.V. All rights reserved.

Is there a relationship between the total volume of load lifted in bench press exercise and the rating of perceived exertion?

Aim. The purpose of the study was to investigate the relationship between the total volume of load lifted (TVLL) and the rating of perceived exertion (RPE) measures during different resistance training (RT) schemes using the bench press exercise. Methods. The present study was divided into two experiments. In the first experiment, 18 healthy men performed three different RT schemes: a strength oriented scheme (SS), a muscular endurance oriented scheme (ES) and a hypertrophy oriented scheme (HS). TVLL was calculated for each scheme. Mean-RPE and session-RPE were assessed. In the second experiment, 23 men performed two resistance exercise bouts at different intensities (50 %-1RM and 75%-1RM) with matched TVLL. Mean-RPE and session-RPE were also assessed. Results. SS and HS showed higher TVLL and greater RPE scores as compared to ES (P<0.05). No significant difference was observed between SS and HS. It was verified significant positive correlations between TVLL and session-RPE (SS r=0.63, HS r=0.64, ES r=0.56; P<0.05), and between mean-RPE and TVLL (SS r=0.55, HS r=0.52, ES r=0.47; P<0.05) for all schemes. No differences were observed for mean-RPE, session-RPE and TVLL between the 50%-1RM and 75%1RM. Significant positive relationships between TVLL and session-RPE (50 %-1RM r=0.61, 75 %-1RM r=0.66; p<0.05) and between TVLL and mean-RPE (50 %-1RM r=0.51, 75%1RM r=0.49; P<0.05) were observed. Conclusion. The results of this study have shown that the TVLL in RT influences RPE measures. These findings corroborates the existence of a relationship between total work performed (external training load) and perception of effort (internal training load).

Kinetic and growth parameters of Arthrospira (Spirulina) platensis cultivated in tubular photobioreactor under different cell circulation systems

Arthrospira platensis was cultivated in tubular photobioreactor in order to evaluate growth and biomass production at variable photosynthetic photon flux density (PPFD?=?60, 120, and 240?mu mol photons m-2?s-1) and employing three different systems for cell circulation, specifically an airlift, a motor-driven pumping and a pressurized system. The influence of these two independents variables on the maximum cell concentration (Xm), cell productivity (Px), nitrogen-to-cell conversion factor (YX/N), photosynthetic efficiency (PE), and biomass composition (total lipids and proteins), taken as responses, was evaluated by analysis of variance. The statistical analysis revealed that the best combination of responses' mean values (Xm?=?4,055?mg?L-1, Px?=?406?mg?L-1?day-1, YX/N?=?5.07?mg?mg-1, total lipids?=?8.94%, total proteins?=?30.3%, PE?=?2.04%) was obtained at PPFD?=?120?mu mol photons m-2?s-1; therefore, this light intensity should be considered as the most well-suited for A. platensis cultivation in this photobioreactor configuration. The airlift system did not exert any significant positive statistical influence on the responses, which suggests that this traditional cell circulation system could successfully be substituted by the others tested in this work. Biotechnol. Bioeng. 2012; 109:444450. (c) 2011 Wiley Periodicals, Inc.

Stand-level patterns of carbon fluxes and partitioning in a Eucalyptus grandis plantation across a gradient of productivity, in Sao Paulo State, Brazil

Wood production represents a large but variable fraction of gross primary production (GPP) in highly productive Eucalyptus plantations. Assessing patterns of carbon (C) partitioning (C flux as a fraction of GPP) between above- and belowground components is essential to understand mechanisms driving the C budget of these plantations. Better knowledge of fluxes and partitioning to woody and non-woody tissues in response to site characteristics and resource availability could provide opportunities to increase forest productivity. Our study aimed at investigating how C allocation varied within one apparently homogeneous 90 ha stand of Eucalyptus grandis (W. Hill ex Maiden) in Southeastern Brazil. We assessed annual above-ground net primary production (ANPP: stem, leaf, and branch production) and total belowground C flux (TBCF: the sum of root production and respiration and mycorrhizal production and respiration), GPP (computed as the sum of ANPP, TBCF and estimated aboveground respiration) on 12 plots representing the gradient of productivity found within the stand. The spatial heterogeneity of topography and associated soil attributes across the stand likely explained this fertility gradient. Component fluxes of GPP and C partitioning were found to vary among plots. Stem NPP ranged from 554 g C m(-2) year(-1) on the plot with lowest GPP to 923 g C m(-2) year(-1) on the plot with highest GPP. Total belowground carbon flux ranged from 497 to 1235 g C m(-2) year(-1) and showed no relationship with ANPP or GPP. Carbon partitioning to stem NPP increased from 0.19 to 0.23, showing a positive trend of increase with GPP (R-2 = 0.29, P = 0.07). Variations in stem wood production across the gradient of productivity observed at our experimental site were a result of the variability in C partitioning to different forest system components.

Relationship between connectivity and academic productivity

A relevant factor in the growth of academic productivity in the second half of 20th century is the implementation of the internet, particularly in developing countries. One of the first networks in Brazil is the Academic Network at Sao Paulo (ANSP), a regional network implemented in the state of Sao Paulo, which contains the largest concentration of researchers in the country. This study presents a unique metric for analyzing the impact of ANSP in academic productivity in the state of Sao Paulo. We correlate academic production and available bandwidth using Fisher ideal price index with suitable variables to evaluate the impact of the internet on research centers and universities. We find that the members of ANSP show a steady growth in academic productivity compared with other institutions outside of the ANSP network. These results suggest that policies which increase available bandwidth can positively affect academic productivity.

Glucocorticoid: Major Factor for Reduced Immunogenicity of 2009 Influenza A (H1N1) Vaccine in Patients with Juvenile Autoimmune Rheumatic Disease

Objective. To assess the immunogenicity and safety of non-adjuvanted influenza A H1N1/2009 vaccine in patients with juvenile autoimmune rheumatic disease (ARD) and healthy controls, because data are limited to the adult rheumatologic population. Method's. A total of 237 patients with juvenile ARD [juvenile systemic lupus erythematosus (JSLE), juvenile idiopathic arthritis (JIA), juvenile dermatomyositis (JDM), juvenile scleroderma, and vasculitis] and 91 healthy controls were vaccinated. Serology for anti-H1N1 was performed by hemagglutination inhibition assay. Seroprotection rate, seroconversion rate, and factor-increase in geometric mean titer (GMT) were calculated. Adverse events were evaluated. Results. Age was comparable in patients and controls (14.8 +/- 3.0 vs 14.6 +/- 3.7 years, respectively; p = 0.47). Three weeks after immunization, seroprotection rate (81.4% vs 95.6%; p = 0.0007), seroconversion rate (74.3 vs 95.6%; p < 0.0001), and the factor-increase in GMT (12.9 vs 20.3; p = 0.012) were significantly lower in patients with juvenile ARD versus controls. Subgroup analysis revealed reduced seroconversion rates in JSLE (p < 0.0001), JIA (p = 0.008), JDM (p = 0.025), and vasculitis (p = 0.017). Seroprotection (p < 0.0001) and GMT (p < 0.0001) were decreased only in JSLE. Glucocorticoid use and lymphopenia were associated with lower seroconversion rates (60.4 vs 82.9%; p = 0.0001; and 55.6 vs 77.2%; p = 0.012). Multivariate logistic regression including diseases, lymphopenia, glucocorticoid, and immunosuppressants demonstrated that only glucocorticoid use (p = 0.012) remained significant. Conclusion. This is the largest study to demonstrate a reduced but adequate immune response to H1N1 vaccine in patients with juvenile ARD. It identified current glucocorticoid use as the major factor for decreased antibody production. The short-term safety results support its routine recommendation for patients with juvenile ARD. ClinicalTrials.gov; NCT01151644. (First Release Nov 15 2011; J Rheumatol 2012;39:167-73; doi:10.3899/jrheum.110721)