Toward a scholarly edition of Beckett's critical writings

This essay outlines the case for a new, scholarly edition of Beckett's critical writings, one that would be complete and with critical annotation. For the most part these texts (critical writings, tributes, in memoria and epigraphs) have been published in a range of places. As well as in the magazines, newspapers, books and special-issue publications in which pieces originally appeared, a number were collected in Disjecta (Calder 1983 & Grove 1984). This volume, however, is not exhaustive; it misses out a number of important texts (not least Proust) and contains some textual inaccuracies. Furthermore, Beckett's critical writings are currently not available from the UK publishers Faber and the Grove Press Centenary Edition of Beckett's works, the fourth volume of which contains a section entitled ‘Criticism’, presents only three works of criticism by Beckett (Proust, ‘Dante … Bruno . Vico . . Joyce’ and ‘Three Dialogues’). In this essay, we give a brief (and far from exhaustive) overview of the publication history of Beckett's non-fiction prose texts, before outlining some of the editorial challenges they pose. Although Beckett tended to be dismissive of these works, they form an integral part of his canon.

Technical note: how accurate can stalagmite formation temperatures be determined using vapour bubble radius measurements in fluid inclusions?

Stalagmites are natural archives containing detailed information on continental climate variability of the past. Microthermometric measurements of fluid inclusion homogenisation temperatures allow determination of stalagmite formation temperatures by measuring the radius of stable laser-induced vapour bubbles inside the inclusions. A reliable method for precisely measuring the radius of vapour bubbles is presented. The method is applied to stalagmite samples for which the formation temperature is known. An assessment of the bubble radius measurement accuracy and how this error influences the uncertainty in determining the formation temperature is provided. We demonstrate that the nominal homogenisation temperature of a single inclusion can be determined with an accuracy of ±0.25 °C, if the volume of the inclusion is larger than 105 μm3. With this method, we could measure in a proof-of-principle investigation that the formation temperature of 10–20 yr old inclusions in a stalagmite taken from the Milandre cave is 9.87 ± 0.80 °C, while the mean annual surface temperature, that in the case of the Milandre cave correlates well with the cave temperature, was 9.6 ± 0.15 °C, calculated from actual measurements at that time, showing a very good agreement. Formation temperatures of inclusions formed during the last 450 yr are found in a temperature range between 8.4 and 9.6 °C, which corresponds to the calculated average surface temperature. Paleotemperatures can thus be determined within ±1.0 °C.

Optimizing the nipple-areola sparing mastectomy with double concentric periareolar incision and biodimensional expander-implant reconstruction: Aesthetic and technical refinements

Although the biodimensional anatomical expander-implant system (BEIS) is a reliable technique, little information has been available regarding outcome following nipple-areola sparing mastectomy (NSM). To perform the resection of glandular tissue, while improving the surgical access and maintaining the nipple-areola vascularization we have developed a new approach for NSM based on the double concentric periareolar incision (DCPI). The purpose of this study is to analyze the feasibility, surgical planning and its outcome following NSM. 18 patients underwent NSM reconstructions. Mean time of follow-up was 29 months. The technique was indicated in patients with small/moderate volume breasts. Flap complications were evaluated and information on aesthetic results and patient satisfaction were collected. 83.3% had tumors measuring 2 cm or less (T1) and 72.1% were stage 0 and 1. All patients presented peripherally tumors located (at least 5 cm from the nipple). Skin complications occurred in 11.1%. One patient (5.5%) presented small skin necrosis and a wound dehiscence was observed in one patient (5.5%). The aesthetic result was good/very good in 94.4 percent and the majority of patients were very satisfied/satisfied. No local recurrences were observed. All complications except one were treated by a conservative approach. DCPI-BEIS is a simple and reliable technique for NSM reconstruction. The success depends on patient selection, coordinated planning with the oncologic surgeon and careful intra-operative and post-operative management. (C) 2009 Elsevier Ltd. All rights reserved.

Technical variation in a sample of high level judo players

Technical actions performed by two groups of judokas who won medals at World Championships and Olympic Games during the period 1995-2001 were analyzed. In the Super Elite group (n = 17) were the best athletes in each weight category. The Elite group (n = 16) were medal winners who were not champions and did not win more than three medals. Super Elite judokas used a greater number of throwing techniques which resulted in scores, even when expressed relative to the total number of matches performed, and these techniques were applied in more directions than those of Elite judokas. Further, the number of different throwing techniques and the variability of directions in which techniques were applied were significantly correlated with number of wins and the number of points and ippon scored. Thus, a greater number of throwing techniques and use of directions for attack seem to be important in increasing unpredictability during judo matches.

Öppna arenor och slutna rum : några kommunikationskonsulter i Dalarna ser på opinionsbildning

Syftet med denna uppsats är att ta reda på hur lokala kommunikationskonsulter i Falun/Borlänge-regionen ser på opinionsbildning via professionella konsulter. De centrala begrepp som avhandlas är PR, opinionsbildning och lobbying.Den teoretiska ram som omger undersökningen består av de teoribyggen som skapats av Jürgen Habermas, James E. Grunig och Larsåke Larsson. Habermas ställer sig tveksam till den demokratiska nyttan av professionell opinionsbildning, Grunig är mer positiv och Larsson ser både för- och nackdelar med PR-verksamheten. Larssons undersökning av opinionskonsulter från 2005 refereras också.Undersökningen bygger på intervjuer med ett antal kommunikationskonsulter verksamma i Falun och Borlänge. Den lokala marknaden för opinionsbildande uppdrag diskuteras, men också huruvida politiska uppdrag förser byråerna med politisk färg. Huruvida medarbetarnas engagemang är viktigt och hur hög statusen på opinionsbildande uppdrag är ventileras, samt vilka arbetsmetoder som används. Intervjuerna behandlar också förekomsten av lobbying på lokal nivå. Till slut redogör de intervjuade för sin syn på hur opinionsbildning, PR och lobbying via konsulter påverkar demokratin.Under slutsatser diskuteras resultatet i relation till den teoretiska ramen. Att PR- och reklambranscherna alltmer växer samman och att opinionsbildning är ett vanligt inslag i många projekt är ett faktum som också skymtat fram i den teoretiska ramen. Men reklam- och PR-metoder integreras också i politiken, på gott och ont. Följaktligen växer den gråzon som finns mellan de olika typerna av kommunikation och mellan opinionsbildande och icke-opinionsbildande uppdrag. Det försvårar gränsdragning och tydlighet, men skapar nya kreativa möjligheter.Att den ökade användningen av kommunikationskonsulter kanske kan bidra till en orättvis fördel för resursstarka organisationer diskuteras. Ny teknik, t.ex. Internet, kan dock eventuellt vara den motvikt som gör det möjligt även för resurssvaga grupper att höras i det offentliga samtalet. Kommunikation som maktfaktor tas även upp utifrån termer som lobbying och medias dagordningsfunktion.Några aspekter av den outnyttjade potential som PR har ventileras också. PR som metod är en outnyttjad resurs på det lokala planet, något som kan bero både på okunskap hos de lokala kunderna och ett traditionellt arbetssätt hos byråerna. Utifrån intervjusvaren framkommer att både byråerna, deras kunder och media på landsorten skulle gynnas av ett större samarbete.Resultaten av intervjuerna stöder mycket i den teoretiska ramen, medan somligt förkastas. Som sammanfattning kan sägas att opinionsbildning via konsulter kan användas för både gott och ont. Vilket som blir resultatet handlar som oftast om etik, ansvar, öppenhet och professionalitet.ABSTRACTThe primary target for this report is to find out how communication consultants in the region of Falun and Borlänge views the practice of establishing public opinions by using professional public relations consultants. The concepts in focus are PR, the moulding of public opinion and lobbying.The theoretical framework surrounding this report is the writings by Jürgen Habermas, James E. Grunig and Larsåke Larsson. Habermas has doubts as to the democratic use of professional consultants working with public opinions, Grunig has a somewhat more positive approach and Larsson sees both advantages and disadvantages in a democratic sense with the PR industry. Larssons research concerning consultants working with the moulding of public opinions from 2005 is also reviewed. The research is carried out by interviewing some communication consultants working in the Falun /Borlänge- area. The local market for commissions concerning public opinions is discussed, but also if and how political commissions are forcing a political stamp upon the firms engaging in such commissions. The importance of personal commitment in the consultants and the level of prominence commissions concerning public opinion has in the business is discussed, but also which methods is used and preferred. The interviews also deal with the practice of lobbying in the local arena. Finally the participants state their views on how the moulding of public opinion, PR and lobbying effects the democracy. Conclusively, the result is put in relation to the theories earlier mentioned. The public relations market is merging with the advertising business, that is a fact, and establishing public opinion is a common element in a lot of projects. But methods used for advertising and PR are also integrated in the political sphere, for good and bad. That has made the distinction between different kinds of communication harder, thereby enhancing the difficulties of establishing boundaries and achieving clarity. Yet at the same time it facilitates new creative opportunities.The growing use of communication consultants may contribute to unfair advantages for organisations with large economic resources. New technical development though, such as the Internet for example, may prove to simplify communication for groups with lesser economic power. Communication as an aspect of power is being discussed in terms of lobbying and the agenda setting power of media.Some aspects of the unused potential that lies within PR are also in focus in this report. PR as a method is an unused resource in the local market, which can be due to the local clients lack of knowledge but also to the traditional work carried out by the communication firms. The findings of the interviews show that both communication firms, their clients and the local media would benefit from greater cooperation.The theoretical base in this work is mostly supported by the interviews, though a few of the findings does not agree. The moulding of public opinions by professional consultants can be used for both good and bad. What the result will be is, not surprisingly, a question of ethics, responsibility, openness and professionalism.

Travel Report from the first field trip within the SIDA supported project "Mini-grids supplied by renewable energy - improving technical and social feasibility : Including visits to Ihushi Development Center, Tweyambe Secondary School and Mavuno Project in Tanzania. Conducted in April 2011

This report describes the outcome of the first visit to Tanzania, within the project "Mini-grids supplied by renewable energy - improving technical and social feasibility". The trip included visits to three different organizations; Ihushi Development Center (IDC) near Mwanza, TIDESO near Bukoba, and Mavuno Project in Karagwe. At IDC, a brief evaluation of the current power system was done and measuring equipment for long term measurements were installed. At all three locations investigations regarding the current and future electricity demand were conducted and connections to people relevant to the study were established. The report is including as well some technical specifications as some observations regarding organization and management of the technical systems. The trip was including only short visits and therefore only brief introductions to the different organizations, based on observations done by the author. The report is hence describing the author’s understanding of the technical system and social structures after only short visits to each of the organizations, and may differ from observations done at another point in time, over a different time period, or by some other person.This report describes the outcome of the first visit to Tanzania, within the project "Mini-grids supplied by renewable energy - improving technical and social feasibility". The trip included visits to three different organizations; Ihushi Development Center (IDC) near Mwanza, TIDESO near Bukoba, and Mavuno Project in Karagwe. At IDC, a brief evaluation of the current power system was done and measuring equipment for long term measurements were installed. At all three locations investigations regarding the current and future electricity demand were conducted and connections to people relevant to the study were established. The report is including as well some technical specifications as some observations regarding organization and management of the technical systems. The trip was including only short visits and therefore only brief introductions to the different organizations, based on observations done by the author. The report is hence describing the author’s understanding of the technical system and social structures after only short visits to each of the organizations, and may differ from observations done at another point in time, over a different time period, or by some other person.

Modified Fixed Effects Estimation of Technical Inefficiency

We consider method of moment fixed effects (FE) estimation of technical inefficiency. When N, the number of cross sectional observations, is large it ispossible to obtain consistent central moments of the population distribution of the inefficiencies. It is well-known that the traditional FE estimator may be seriously upward biased when N is large and T, the number of time observations, is small. Based on the second central moment and a single parameter distributional assumption on the inefficiencies, we obtain unbiased technical inefficiencies in large N settings. The proposed methodology bridges traditional FE and maximum likelihood estimation – bias is reduced without the random effects assumption.

A finite sample improvement of the fixed effects estimator : applied to technical infficiency

The FE ('fixed effects') estimator of technical inefficiency performs poorly when N ('number of firms') is large and T ('number of time observations') is small. We propose estimators of both the firm effects and the inefficiencies, which have small sample gains compared to the traditional FE estimator. The estimators are based on nonparametric kernel regression of unordered variables, which includes the FE estimator as a special case. In terms of global conditional MSE ('mean square error') criterions, it is proved that there are kernel estimators which are efficient to the FE estimators of firm effects and inefficiencies, in finite samples. Monte Carlo simulations supports our theoretical findings and in an empirical example it is shown how the traditional FE estimator and the proposed kernel FE estimator lead to very different conclusions about inefficiency of Indonesian rice farmers.

Booth of the Lithographic Technical Foundation, Inc. at the Lithographic Technical Forum

This photo of the Lithographic Technical Forum shows the booth of the Lithographic Technical Foundation, Inc. The foundation was founded in 1924 to foster research and education in the lithography industry. The slogan "Research to improve lithography . . . Education to improve craft skill" can be seen at the very top of the booth. A group of people are depicted looking at the range of educational material about lithography on display. Black and white photograph.

Crowd at the Lithographic Technical Forum

Several people are looking at sample prints in this photograph of the Lithographic Technical Forum. In the background the booth for the Lithographic Technical Foundation, Inc. can be seen. Black and white photograph.

Lithographic Technical Foundation, Inc. booth at the Lithographic Technical Forum

Three people are posed in front of the Lithographic Technical Foundation, Inc. booth at the Lithographic Technical Forum. The Lithographic Technical Foundation was founded in 1924 as an industry organization to promote research and education. In the 1960s the foundation changed its name to the Graphic Arts Technical Foundation and in the late 1990s merged with Printing Industry America. The organization ha a number of educational materials about lithography on display. Black and white photograph.