Festivals, games and amusements. Ancient and modern.

At head of title: Harper's stereotype edition.

Skiing the National Forests, America's playgrounds /

Cover title.

Skiing : the National Forests, America's playgrounds /

Cover title.

Diving behaviour of a reptile (Crocodylus johnstoni) in the wild: Interactions with heart rate and body temperature

The differences in physical properties of air and water pose unique behavioural and physiological demands on semiaquatic animals. The aim of this study was to describe the diving behaviour of the freshwater crocodile Crocodylus johnstoni in the wild and to assess the relationships between diving, body temperature, and heart rate. Time-depth recorders, temperature-sensitive radio transmitters, and heart rate transmitters were deployed on each of six C. johnstoni (4.0-26.5 kg), and data were obtained from five animals. Crocodiles showed the greatest diving activity in the morning (0600-1200 hours) and were least active at night, remaining at the water surface. Surprisingly, activity pattern was asynchronous with thermoregulation, and activity was correlated to light rather than to body temperature. Nonetheless, crocodiles thermoregulated and showed a typical heart rate hysteresis pattern (heart rate during heating greater than heart rate during cooling) in response to heating and cooling. Additionally, dive length decreased with increasing body temperature. Maximum diving length was 119.6 min, but the greatest proportion of diving time was spent on relatively short (

Heat-induced and other chemical changes in commercial UHT milks

The properties of commercial directly and indirectly heated UHT milks, both after heating and during storage at room temperature for 24 weeks, were studied. Thermally induced changes were examined by changes in lactulose, furosine and acid-soluble whey proteins. The results confirmed previous reports that directly heated UHT milks suffer less heat damage than indirectly heated milk. During storage, furosine increased and bovine serum albumin in directly heat-treated milks decreased significantly. The changes in lactulose, alpha-lactalbumin and beta-lactoglobulin were not statistically significant. The data suggest that heat treatment indicators should be measured as soon as possible after processing to avoid any misinterpretations of the intensity of the heat treatment.

Double-heater-wire circuits and heat-and-moisture exchangers and the risk of ventilator-associated pneumonia

Objective: To compare the incidence of ventilator-associated pneumonia (VAP) in patients ventilated in intensive care by means of circuits humidified with a hygroscopic heat-and-moisture exchanger with a bacterial viral filter (HME) or hot-water humidification with a heater wire in both inspiratory and expiratory circuit limbs (DHW) or the inspiratory limb only (SHW). Design: A prospective, randomized trial. Setting: A metropolitan teaching hospital's general intensive care unit. Patients: Three hundred eighty-one patients requiring a minimum period of mechanical ventilation of 48 hrs. Interventions: Patients were randomized to humidification with use of an HME (n = 190), SHW (n = 94), or DHW (n = 97). Measurements and Main Results. Study end points were VAP diagnosed on the basis of Clinical Pulmonary Infection Score (CPIS) (1), HME resistance after 24 hrs of use, endotracheal tube resistance, and HME use per patient. VAP occurred with similar frequency in all groups (13%, HME; 14%, DHW; 10%, SHW; p = 0.61) and was predicted only by current smoking (adjusted odds ratio [AOR], 2.1; 95% confidence interval [CI], 1.1-3.9; p =.03) and ventilation days (AOR, 1.05; 95% Cl, 1.0-1.2; p =.001); VAP was less likely for patients with an admission diagnosis of pneumonia (AOR, 0.40; 95% Cl, 0.4-0.2; p =.04). HME resistance after 24 hrs of use measured at a gas flow of 50 L/min was 0.9 cm H2O (0.4-2.9). Endotracheal tube resistance was similar for all three groups (16-19 cm H2O min/L; p =.2), as were suction frequency, secretion thickness, and blood on suctioning (p =.32, p =.06, and p =.34, respectively). The HME use per patient per day was 1.13. Conclusions: Humidification technique does not influence either VAP incidence or secretion characteristics, but HMEs may have air-flow resistance higher than manufacturer specifications after 24 hrs of use.

Accessibility, deprivation and rural planning policies.

Since the Second World War a range of policies have been implemented by central and local government agencies, with a view to improving accessibility to facilities, housing and employment opportunities within rural areas. It has been suggested that a lack of reasonable access to a range of such facilities and opportunities constitutes a key aspect of deprivation or disadvantage for rural residents. Despite considerable interest, very few attempts have been made to assess the nature and incidence of this disadvantage or the reaction of different sections of the population of rural areas to it. Moreover, almost all previous assessments have relied on so-called 'objective' measures of accessibility and disadvantage and failed to consider the relationship between such measures and 'subjective' measures such as individual perceptions. It is this gap in knowledge that the research described in this thesis has addressed. Following a critical review of relevant literature the thesis describes the way in which data on 'objective' and 'subjective' indicators of accessibility and behavioural responses to accessibility problems was collected, in six case study areas in Shropshire. Analysis of this data indicates that planning and other government policies have failed to significantly improve rural resident's accessibility to their basic requirements, and may in some cases have exacerbated it, and that as a result certain sections of the rural population are relatively disadvantaged. Moreover, analysis shows that .certain aspects of individual subjective' assessments of such accessibility disadvantage are significantly associated with more easily-obtained 'objective' measures. By using discriminant analysis the research demonstrates that it is possible to predict the likely levels of satisfaction with access to facilities from a range of 'objective' measures. The research concludes by highlighting the potential practical applications of such indicators in policy formulation, policy appraisal and policy evaluation.

Melting and solidification of Zinc-Aluminium alloys

Following a scene-setting introduction are detailed reviews of the relevant scientific principles, thermal analysis as a research tool and the development of the zinc-aluminium family of alloys. A recently introduced simultaneous thermal analyser, the STA 1500, its use for differential thermal analysis (DTA) being central to the investigation, is described, together with the sources of support information, chemical analysis, scanning electron microscopy, ingot cooling curves and fluidity spiral castings. The compositions of alloys tested were from the binary zinc-aluminium system, the ternary zinc-aluminium-silicon system at 30%, 50% and 70% aluminium levels, binary and ternary alloys with additions of copper and magnesium to simulate commercial alloys and five widely used commercial alloys. Each alloy was shotted to provide the smaller, 100mg, representative sample required for DTA. The STA 1500 was characterised and calibrated with commercially pure zinc, and an experimental procedure established for the determination of DTA heating curves at 10°C per minute and cooling curves at 2°C per minute. Phase change temperatures were taken from DTA traces, most importantly, liquidus from a cooling curve and solidus from both heating and cooling curves. The accepted zinc-aluminium binary phase diagram was endorsed with the added detail that the eutectic is at 5.2% aluminium rather than 5.0%. The ternary eutectic trough was found to run through the points, 70% Al, 7.1% Si, 545°C; 50% Al, 3.9% Si, 520°C; 30% Al, 1.4% Si, 482°C. The dendrite arm spacing in samples after DTA increased with increasing aluminium content from 130m at 30% to 220m at 70%. The smallest dendrite arm spacing of 60m was in the 30% aluminium 2% silicon alloy. A 1kg ingot of the 10% aluminium binary alloy, insulated with Kaowool, solidified at the same 2°C per minute rate as the DTA samples. A similar sized sand casting was solidified at 3°C per minute and a chill casting at 27°C per minute. During metallographic examination the following features were observed: heavily cored phase which decomposed into ' and '' on cooling; needles of the intermetallic phase FeAl4; copper containing ternary eutectic and copper rich T phase.

Sustainable development, shock and awe? London 2012 and Civil Society

There is a disconnection between the top-down, elite, nature of sports mega-events and the ostensible redistributive and participatory sustainable development agendas staked out by BINGOs (Business-based International Non-Governmental Organizations) such as the contemporary International Olympic Committee (IOC). Focusing specifically on the London 2012 Summer Olympic and Paralympic Games, we argue that, for all the environmental technology advances offered by sports mega-events, their dominant model remains one of a hollowed-out form of sustainable development. Despite significant technical and methodological innovations in environmental stewardship, the development model of the London Olympics remains predicated on the satisfaction of transnational investment flows. We discuss what this means for claims about the staging of a ‘green’ Olympic Games.