Hedwig and The Angry Inch: Plato at the Sundance Film Festival

The aim of this article is to show how an ancient myth, that of the three genres, also known as the myth of the androgynous by Aristophanes in Plato¿s Symposium, becomes for John Cameron Mitchell the suitable image in order to explain the peculiar personality of a man, Hedwig, who by means of a surgical operation becomes in his turn an imperfect androgynous but symbolises the need of a sole mankind or the unity of different worlds, just as he belonged to both Berlins divided by an already fallen wall, which permitted their inhabitants to recover their lost unity and identity.

Low temperature amorphous and nanocrystalline silicon thin film transistors deposited by Hot-Wire CVD on glass substrate

Amorphous and nanocrystalline silicon films obtained by Hot-Wire Chemical Vapor Deposition have been incorporated as active layers in n-type coplanar top gate thin film transistors deposited on glass substrates covered with SiO 2. Amorphous silicon devices exhibited mobility values of 1.3 cm 2 V - 1 s - 1, which are very high taking into account the amorphous nature of the material. Nanocrystalline transistors presented mobility values as high as 11.5 cm 2 V - 1 s - 1 and resulted in low threshold voltage shift (∼ 0.5 V).

Film-free laser forward printing of transparent and weakly absorbing liquids

A laser-based technique for printing transparent and weakly absorbing liquids is developed. Its principle of operation relies in the tight focusing of short laser pulses inside the liquid and close to its free surface, in such a way that the laser radiation is absorbed in a tiny volume around the beam waist, with practically no absorption in any other location along the beam path. If the absorbed energy overcomes the optical breakdown threshold, a cavitation bubble is generated, and its expansion results in the propulsion of a small fraction of liquid which can be collected on a substrate, leading to the printing of a microdroplet for each laser pulse. The technique does not require the preparation of the liquid in thin film form, and its forward mode of operation imposes no restriction concerning the optical properties of the substrate. These characteristics make it well suited for printing a wide variety of materials of interest in diverse applications. We demonstrate that the film-free laser forward printing technique is capable of printing microdroplets with good resolution, reproducibility and control, and analyze the influence of the main process parameter, laser pulse energy. The mechanisms of liquid printing are also investigated: time-resolved imaging provides a clear picture of the dynamics of liquid transfer which allows understanding the main features observed in the printed droplets.

A fully automated hot-wall multiplasma-monochamber reactor for thin film deposition

We present a study on the development and the evaluation of a fully automated radio-frequency glow discharge system devoted to the deposition of amorphous thin film semiconductors and insulators. The following aspects were carefully addressed in the design of the reactor: (1) cross contamination by dopants and unstable gases, (2) capability of a fully automated operation, (3) precise control of the discharge parameters, particularly the substrate temperature, and (4) high chemical purity. The new reactor, named ARCAM, is a multiplasma-monochamber system consisting of three separated plasma chambers located inside the same isothermal vacuum vessel. Thus, the system benefits from the advantages of multichamber systems but keeps the simplicity and low cost of monochamber systems. The evaluation of the reactor performances showed that the oven-like structure combined with a differential dynamic pumping provides a high chemical purity in the deposition chamber. Moreover, the studies of the effects associated with the plasma recycling of material from the walls and of the thermal decomposition of diborane showed that the multiplasma-monochamber design is efficient for the production of abrupt interfaces in hydrogenated amorphous silicon (a-Si:H) based devices. Also, special attention was paid to the optimization of plasma conditions for the deposition of low density of states a-Si:H. Hence, we also present the results concerning the effects of the geometry, the substrate temperature, the radio frequency power and the silane pressure on the properties of the a-Si:H films. In particular, we found that a low density of states a-Si:H can be deposited at a wide range of substrate temperatures (100°C

Threading dislocation lines in two-sided flux-array decorations

Two-sided flux decoration experiments indicate that threading dislocation lines (TDLs), which cross the entire film, are sometimes trapped in metastable states. We calculate the elastic energy associated with the meanderings of a TDL. The TDL behaves as an anisotropic and dispersive string with thermal fluctuations largely along its Burgers vector. These fluctuations also modify the structure factor of the vortex solid. Both effects can, in principle, be used to estimate the elastic moduli of the material.

Proposed gravitational wave observatory based on solid elastic spheres

Spherical gravitational wave (GW) detectors offer a wealth of so far unexplored possibilities to detect gravitational radiation. We find that a sphere can be used as a powerful testbed for any metric theory of gravity, not only general relativity as considered so far, by making use of a deconvolution procedure for all the electric components of the Riemann tensor. We also find that the spheres cross section is large at two frequencies, and advantageous at higher frequencies in the sense that a single antenna constitutes a real xylophone in its own. Proposed GW networks will greatly benefit from this. The main features of a two large sphere observatory are reported.

Audit report on the Delaware County Solid Waste Disposal Commission for the year ended June 30, 2011

Audit report on the Delaware County Solid Waste Disposal Commission for the year ended June 30, 2011

Prevalence of patients' difficulties in swallowing solid oral dosage forms

Introduction Swallowing difficulties, or dysphagia, can occur in anyage group, although it is most common among elderly people. It canaffect patients' ability to take solid oral dosage forms, thus compromisingmedication adherence. Although literature is poor, availabledata show that prevalence in the general population ranges from 25 to60%. Prevalence in community pharmacies needs to be explored.Materials & Methods Community pharmacies were recruited from arandom selection in three Swiss states: Basel-Stadt (BS), Basel-Landschaft (BL) and Lausanne (LA). Patients' ability to swallowsolid oral medications was enquired with a semi-structured interview;the interviewer spent 4 h in each included pharmacy. Each consecutivepatient (18 years and older) entering the pharmacy with aprescription for at least 3 different solid oral forms was enrolled.Study was approved by the Lausanne ethics committee.Results Sixty pharmacies took part in the study (20 in BS, 10 in BL,30 in LA) between March and May 2010. Patient inclusion rate was77.8% (410/527). Prevalence of swallowing disorders was 22.4% (92/410). Patients with swallowing disorders were older (mean age: 67.5± 16 years vs. 63.0 ± 14 years, range 19-96; p = 0.03) and moreoften women (69.6% vs. 59.1%; Chi2 = 3.3, p = 0.04) than patientswithout swallowing disorders. They had on average 4.6 ± 2.7 drugswith a mean number of 5.5 ± 3.3 tablets or capsules to take daily,which didn't differ from the number of drugs taken by patientswithout swallowing difficulties (4.9 ± 2.5 drugs and 5.9 ± 3.5 tablets;n.s.). The difficulty was mainly related to the big size (63%) orthe quality of pill coating (rough, sticky, 14%). Twenty-one patients(37.5%) stated that their swallowing disorders resulted in nonadherence, rated as rarely (12 patients), sometimes (6 patients), veryoften (1 patient) or always (2 patients). According to patients, nopharmacist and only 2 physicians enquired about patients' swallowingissue.Discussion & Conclusion Swallowing difficulties are frequent amongpatients in community pharmacies in Switzerland with an estimatedprevalence of 22%. The problem resulted in non adherence or partialadherence in at least 35% of these patients. However, pharmacists andphysicians did not routinely inquire about the disorder. Guidelinesshould be developed for promoting systematic approaches of patientsin community pharmacies.

Audit report on the Crawford County Area Solid Waste Agency Commission for the year ended June 30, 2011

Audit report on the Crawford County Area Solid Waste Agency Commission for the year ended June 30, 2011

Three-dimensional aspects of fluid flows in channels. II. Effects of meniscus and thin film regimes on viscous fingers

We perform a three-dimensional study of steady state viscous fingers that develop in linear channels. By means of a three-dimensional lattice-Boltzmann scheme that mimics the full macroscopic equations of motion of the fluid momentum and order parameter, we study the effect of the thickness of the channel in two cases. First, for total displacement of the fluids in the channel thickness direction, we find that the steady state finger is effectively two-dimensional and that previous two-dimensional results can be recovered by taking into account the effect of a curved meniscus across the channel thickness as a contribution to surface stresses. Second, when a thin film develops in the channel thickness direction, the finger narrows with increasing channel aspect ratio in agreement with experimental results. The effect of the thin film renders the problem three-dimensional and results deviate from the two-dimensional prediction.

Audit report on the Rathbun Area Solid Waste Commission for the year ended June 30, 2012

Audit report on the Rathbun Area Solid Waste Commission for the year ended June 30, 2012

Audit report on the Hamilton County Solid Waste Commission for the year ended June 30, 2011

Audit report on the Hamilton County Solid Waste Commission for the year ended June 30, 2011

Audit report on the Shelby County Area Solid Waste Agency for the year ended June 30, 2012

Audit report on the Shelby County Area Solid Waste Agency for the year ended June 30, 2012