Oligonucleotide N3'-->P5' phosphoramidates.

Synthetic oligonucleotides and their analogs have attracted considerable interest recently. These compounds may lead to highly specific therapeutic agents, as well as to powerful diagnostic tools. Here, we present the synthesis of uniformly modified oligodeoxyribonucleotide N3'-->P5' phosphoramidates containing 3'-NHP(O)(O-)O-5' internucleoside linkages and the study of their hybridization properties. Thermal dissociation experiments show that these compounds form very stable duplexes with single-stranded DNA, RNA, and with themselves following Watson-Crick base pairing. The duplex thermal stability was enhanced by 2.2-2.6 degrees C per modified linkage compared with phosphodiesters. The structure of complexes formed by phosphoramidates closely resembles that of RNA oligomers and corresponds to an A form, as judged by CD spectroscopy. N3'-->P5' phosphoramidates also form stable triplexes with double-stranded DNA under near-physiological conditions when natural phosphodiesters fail to do so. Physicochemical characteristics of the amidates are similar to those of RNA oligomers, even though they are composed of 2'-deoxyfuranose-based nucleosides.

The benzene metabolite p-benzoquinone forms adducts with DNA bases that are excised by a repair activity from human cells that differs from an ethenoadenine glycosylase.

Benzene is a ubitiquous human environment mental carcinogen. One of the major metabolites is hydroquinone, which is oxidized in vivo to give p-benzoquinone (p-BQ). Both metabolites are toxic to human cells. p-BQ reacts with DNA to form benzetheno adducts with deoxycytidine, deoxyadenosine, and deoxyguanosine. In this study we have synthesized the exocyclic compounds 3-hydroxy-3-N4-benzetheno-2'-deoxycytidine (p-BQ-dCyd) and 9-hydroxy-1,N6-benzetheno-2'-deoxyadenosine (p-BQ-dAdo), respectively, by reacting deoxycytidine and deoxyadenosine with p-BQ. These were converted to the phosphoamidites, which were then used to prepare site-specific oligonucleotides with either the p-BQ-dCyd or p-BQ-dAdo adduct (pbqC or pbqA in sequences) at two different defined positions. These oligonucleotides were efficiently nicked 5' to the adduct by partially purified HeLa cell extracts--the pbqC-containing oligomer more rapidly than the pbqA-containing oligomer. In contrast to the enzyme binding to derivatives produced by the vinyl chloride metabolite chloroacetaldehyde, the oligonucleotides up to 60-mer containing p-BQ adducts did not bind measurably to the same enzyme preparation in a gel retardation assay. Furthermore, there was no competition for the binding observed between oligonucleotides containing 1,N6-etheno A deoxyadenosine (1,N6-etheno-dAdo; epsilon A in sequences) and these oligomers containing either of the p-BQ adducts, even at 120-fold excess. When highly purified fast protein liquid chromatography (FPLC) enzyme fractions were obtained, there appeared to be two closely eluting nicking activities. One of these enzymes bound and cleaved the epsilon A-containing deoxyoligonucleotide. The other enzyme cleaved the pbqA- and pbqC-containing deoxyoligonucleotides. One additional unexpected fact was that bulk p-BQ-treated salmon sperm DNA did compete effectively with the epsilon A-containing oligonucleotide for protein binding. This raises the possibility that such DNA contains other, as-yet-uncharacterized adducts that are recognized by the same enzyme that recognizes the etheno adducts. In summary, we describe a previously undescribed human DNA repair activity, possibly a glycosylase, that excises from DNA pbqC and pbqA, exocyclic adducts resulting from reaction of deoxycytidine and deoxyadenosine with the benzene metabolite, p-BQ. This glycosylase activity is not identical to the one previously reported from this laboratory as excising the four etheno bases from DNA.

Basis for selection of improved carbohydrate-binding single-chain antibodies from synthetic gene libraries.

A technique is described for the simultaneous and controlled random mutation of all three heavy or light chain complementarity-determining regions (CDRs) in a single-chain Fv specific for the O polysaccharide of Salmonella serogroup B. Sense oligonucleotides were synthesized such that the central bases encoding a CDR were randomized by equimolar spiking with A, G, C, and T at a level of 10% while the antisense strands contained inosine in the spiked regions. Phage display of libraries assembled from the spiked oligonucleotides by a synthetic ligase chain reaction demonstrated a bias for selection of mutants that formed dimers and higher oligomers. Kinetic analyses showed that oligomerization increased association rates in addition to slowing dissociation rates. In combination with some contribution from reduced steric clashes with residues in heavy-chain CDR2, oligomerization resulted in functional affinities that were much higher than that of the monomeric form of the wild-type single-chain Fv.

Interações moleculares no mecanismo de ação da galectina-4 humana

A galectina-4 humana (HGal-4), pertencente à família das galectinas, possui dois domínios de reconhecimento de carboidratos (CRDs) com alta afinidade para β-galactosídeos e se encontra amplamente distribuída em células normais e neoplásicas de diferentes organismos. Suas funções snglobam uma grande variedade de eventos celulares, tais como processos inflamatórios, neoplásicos, progressão tumoral e metástase. Entretanto, muitas perguntas sobre suas interações com diferentes carboidratos, a especificidade destas interações e o papel específico das galectinas permanecem ainda sem resposta. No presente trabalho, propomos a investigação das interações galectina-glicano da galectina-4 humana e de seus domínios CRDs independentes (CRD-I e CRD-II) através de um conjunto de métodos biofísicos. Através do método de dicroísmo circular (CD), usando várias regiões espectrais, e fluorescência fomos capazes de entender mudanças ocorrentes na estrutura secundária e terciária das protéinas quando da interação com lactose/sacarose. Estes dados, juntamente com testes de hemaglutinação, mostraram que a glectina-4 e os CRDs respondem de forma distinta à ligação com açúcar. Por diferentes técnicas (fluorescência, ITC e MST) determinamos as constantes de dissociação para os domínios CRDs (Kd ~0,5 mM) e para HGal-4 e, de forma qualitativa, os valores obtidos indicaram possíveis estados oligoméricos dessas proteínas. A investigação da interação proteína-membrana da HGal-4 foi feita, primeiramente, com miméticos de membranas e monitorada pela técnica de RPE em crescente complexidade de composição de tais miméticos, indo desde composições mais simples, passando por lipid rafts na presença de diferentes glicolipídeos (GM1, LPS) e chegando-se à interação com células tumorais (U87MG, T98G e HT-29). Tais experimentos mostraram que galectina-4 reconhece e se liga naqueles modelos onde existem glicanos complexos na superfície. Investigamos também a participação de HGal-4 endógena e exógena no tratamento quimioterápico de células tumorais e verificamos um papel importante de HGal-4 para células HT-29. Finalizando esta tese, apresentamos o trabalho realizado em um ano de estágio na University of Oxford, durante o qual, investigamos a estrutura da região C-terminal de um receptor da família GPCR, qual seja o receptor de neurotensina NTS1. Aqui, mais uma vez, foi empregada a técnica de RPE que aliada à produção/marcação de mutantes do receptor, permitiu determinar que a hélice H8 se estabiliza quando em proteolipossomos.

Uma nova metodologia para a síntese de modelos de lignina a partir de reações de inserção O-H entre fenóis de α-aril diazocetonas

A biomassa lignicelulósica tem sua estrutura composta por celulose, hemicelulose e lignina. Dentre essas, a lignina tem se mostrado interessante por ser uma fonte precursora sustentável de fragmentos aromáticos antes obtidos apenas de combustíveis fósseis. Sua estrutura é composta por resíduos de fenilpropanóides p-hidroxibenzeno (H), guaiacil (G) e siringil (S) unidas por ligações C–C e C–O–C em que a ligação β–O–4 é a predominante (mais de 50%). Devido à sua complexidade estrutural e conformacional, a clivagem de suas ligações é pouco seletiva e a caracterização dos fragmentos resultantes é complexa. Uma estratégia comumente empregada para evitar esses desafios é o uso de modelos mais simples. Entretanto, poucas metodologias são reportadas na literatura para a sua síntese e a maioria delas envolve o emprego de halocetonas. O presente trabalho desenvolveu duas novas metodologias promissoras para síntese desses oligômeros, contendo ligação β–O–4 por meio da química de diazo: (a) reação de inserção O–H entre fenol e α–aril diazocetonas, e (b) compostos α–diazo β-cetoéster. Ademais, a utilização de monômeros contendo a função fenol e diazocetona no mesmo anel permitiria a síntese de cadeias de diversos tamanhos em uma única etapa. Como ponto de partida para o estudo, limitou-se à síntese de dímeros, visando entender a reação de inserção O–H. Os produtos desejados foram obtidos em rendimentos de 27–51% após catálise com Cu(hfac)2. Por fim, os modelos de lignina propriamente ditos foram sintetizados após simples adição aldólica e redução em rendimentos globais de 51–78%. Os estudos envolvendo a inserção de fenol em α–diazo β-cetoéster mostraram resultados promissores, corroborando para uma nova estratégia sintética para a obtenção de modelos de lignina. Novos estudos em nosso laboratório estão sendo desenvolvidos para se obter resultados mais conclusivos.

Adsorption and first stages of polymerization of aniline on platinum single crystal electrodes

The present communication studies the adsorption of aniline on platinum single crystal electrodes and the electrochemical properties of the first layers of polyaniline(PANI) grown on those platinum surfaces. The adsorption process was studied in aqueous acidic solution (0.1 M HClO4) and the electrochemical properties of thin films of PANI in both aqueous (1 M HClO4) and non-aqueous media (tetrabutyl ammonium hexafluorophosphate (TBAPF6) with additions of methanesulphonic acid in acetonitrile). First of all, it was found that the adsorption of aniline on platinum single crystal surfaces is a surface sensitive process, and even more important that the adsorption features found at low concentrations (5 × 10−5 M) can be directly correlated to the electrochemical properties of thin films of PANI in the very early stages of polymerization. The Pt(1 1 0) surface was found to be more suitable to obtain polymers with more reversible redox transitions when studied in aqueous media (1 M HClO4). This is in good agreement with the higher polymerization rates found on this surface compared to Pt(1 0 0) and Pt(1 1 1). Finally the differences in ionic exchange rate were greatly enhanced when they were studied in organic media. The AC 250 Hz response in the case of the thin films synthesized on Pt(1 1 0) is about twice greater than that obtained in the other basal planes using polymer layers with the same thickness.

Bio-based PLA_PHB plasticized blend films: Processing and structural characterization

Bio-based films formed by poly(lactic acid) (PLA) and poly(3-hydroxybutyrate) (PHB) plasticized with an oligomer of the lactic acid (OLA) were used as supporting matrices for an antibacterial agent (carvacrol). This paper reports the main features of the processing and physico-chemical characterization of these innovative biodegradable material based films, which were extruded and further submitted to filmature process. The effect of the addition of carvacrol and OLA on their microstructure, chemical, thermal and mechanical properties was assessed. The presence of these additives did not affect the thermal stability of PLA_PHB films, but resulted in a decrease in their crystallinity and in the elastic modulus for the active formulations. The obtained results showed the effective presence of additives in the PLA or the PLA_PHB matrix after processing at high temperatures, making them able to be used in active and bio-based formulations with antioxidant/antimicrobial performance.

Processing and characterization of plasticized PLA/PHB blends for biodegradable multiphase systems

Blends of poly(lactic acid) (PLA) and poly(3-hydroxybutyrate) (PHB) plasticized with a lactic acid oligomer (OLA) added at three different concentrations (15, 20 and 30 wt% by weight), were prepared by an optimized extrusion process to improve the processability and mechanical properties of these biopolymers for flexible film manufacturing. Morphological, chemical, thermal, mechanical, barrier and migration properties were investigated and formulations with desired performance in eco-friendly films were selected. The efficiency of OLA as plasticizer for PLA_PHB blends was demonstrated by the significant decrease of their glass transition temperatures and a considerable improvement of their ductile properties. The measured improvements in the barrier properties are related to the higher crystallinity of the plasticized PLA_PHB blends, while the overall migration test underlined that all the proposed formulations maintained migration levels below admitted levels. The PLA_PHB blend with 30 wt% OLA was selected as the optimum formulation for food packaging, since it offered the best compromise between ductility and oxygen and water vapor barrier properties with practically no migration.

Presence of Siloxanes in the Biogas of a Wastewater Treatment Plant Separation in Condensates and Influence of the Dose of Iron Chloride on its Elimination

The siloxanes present in the biogas produced during anaerobic digestion damage the mechanism of cogeneration equipment and, consequently, negatively affect the energy valorization process. For this reason, the detection and elimination of these silicon-derived chemical compounds are a priority in the management of cogeneration facilities. In this regard, the objectives of this paper are, firstly, to characterize the siloxanes in the biogas and, secondly, to qualitatively evaluate the influence of the dose of iron chloride on its elimination. The research was performed at the Rincón de León Wastewater Treatment Plant (Alicante, Spain). The outflow biogas of the digesters and of the pressurized gasometers was sampled and analyzed. The results obtained made it possible to demonstrate, firstly, the absence of linear siloxanes and that, of the cyclic siloxanes, the predominant type was decamethylcyclopentasiloxane, and, secondly, that the addition of iron chloride in the digesters significantly reduces the siloxane content in the biogas. Additionally, it was demonstrated that the process of compression of the biogas, with the elimination of condensates, also produces significant reductions in the concentration of siloxanes in the biogas.

On the prospective detection of polyoxymethylene in comet 67P/Churyumov–Gerasimenko with the COSIMA instrument onboard Rosetta

The presence of polyoxymethylene (POM) in cometary grains has been debated years ago. Although never proven, its presence can not be excluded. Rosetta, the ESA mission to comet 67P/Churyumov–Gerasimenko, may answer this question. On board the spacecraft, COSIMA (COmetary Secondary Ion Mass Analyzer) will analyze the grains ejected from the nucleus using a Time Of Flight Secondary Ion Mass Spectrometer (TOF-SIMS). In this paper we report the extent to which COSIMA will be able to detect POM if this compound is present on cometary grains. We have analyzed two kinds of POM polymers with a laboratory model of COSIMA. Positive mass spectra display alternating sequence of peaks with a separation of 30.011 Da between 1 and 600 Da related to formaldehyde and its oligomers but also to the fragmentation of these oligomers. The separation of 30.011 Da of numbers peaks, corresponding to the fragmentation into H2CO is characteristic of POM and we show that it could be highlight by mathematical treatment. POM lifetime on COSIMA targets have also been studied as POM is thermally instable. It can be concluded that the cometary grains analysis have to be planned not too long after their collection in order to maximize the chances to detect POM. This work was supported by the Centre National d'Etudes Spatiales (CNES).

Cryo-EM structure of aerolysin variants reveals a novel protein fold and the pore-formation process

Owing to their pathogenical role and unique ability to exist both as soluble proteins and transmembrane complexes, pore-forming toxins (PFTs) have been a focus of microbiologists and structural biologists for decades. PFTs are generally secreted as water-soluble monomers and subsequently bind the membrane of target cells. Then, they assemble into circular oligomers, which undergo conformational changes that allow membrane insertion leading to pore formation and potentially cell death. Aerolysin, produced by the human pathogen Aeromonas hydrophila, is the founding member of a major PFT family found throughout all kingdoms of life. We report cryo-electron microscopy structures of three conformational intermediates and of the final aerolysin pore, jointly providing insight into the conformational changes that allow pore formation. Moreover, the structures reveal a protein fold consisting of two concentric β-barrels, tightly kept together by hydrophobic interactions. This fold suggests a basis for the prion-like ultrastability of aerolysin pore and its stoichiometry.

Improving the Manufacturability of Active Microfluidic Devices using Stereolithography (SL)

Thesis (Master's)--University of Washington, 2016-06

Designing biostable polyurethane elastomers for biomedical implants

The chemical structure, synthesis, morphology, and properties of polyurethane elastomers are briefly discussed. The current understanding of the effect of chemical structure and the associated morphology on the stability of polyurethanes in the biological environments is reviewed. The degradation of conventional polyurethanes appears as surface or deep cracking, stiffening, and deterioration of mechanical properties, such as flex-fatigue resistance. Polyester and poly( tetramethylene oxide) based polyurethanes degrade by hydrolytic and oxidative degradation of ester and ether functional groups, respectively. The recent approaches to develop polyurethanes with improved long-term biostability are based on developing novel polyether, hydrocarbon, polycarbonate, and siloxane macrodiols to replace degradation-prone polyester and polyether macrodiols in polyurethane formulations. The new approaches are discussed with respect to synthesis, properties and biostability based on reported in vivo studies. Among the newly developed materials, siloxane-based polyurethanes have exhibited excellent biostability and are expected to find many applications in biomedical implants.

Self-assembly of a charge-neutral molecular square

Complexation of cadmium(II) by the ditopic (bis-tridentate) thiocarbazone ligand 1,5-bis(6-methyl-2-pyridylmethylene) thiocarbonohydrazide, H2L1, results in the self-assembly of a charge-neutral 2 x 2 molecular grid, [Cd-4(L-1)(4)], comprising four metals and four ligands in an interlocked cyclic array. The solid-state structure of this tetramer has been established by X-ray crystallography and in solution by H-1 NMR spectroscopy. The presence of lower molecular weight oligomers was identified by both NMR and ESI-MS.

Three distinct molecular surfaces in ephrin-A5 are essential for a functional interaction with EphA3

Eph receptor tyrosine kinases (Ephs) function as molecular relays that interact with cell surface-bound ephrin ligands to direct the position of migrating cells. Structural studies revealed that, through two distinct contact surfaces on opposite sites of each protein, Eph and ephrin binding domains assemble into symmetric, circular heterotetramers. However, Eph signal initiation requires the assembly of higher order oligomers, suggesting additional points of contact. By screening a random library of EphA3 binding-compromised ephrin-A5 mutants, we have now determined ephrin-A5 residues that are essential for the assembly of high affinity EphA3 signaling complexes. In addition to the two interfaces predicted from the crystal structure of the homologous EphB2 center dot ephrin-B2 complex, we identified a cluster of 10 residues on the ephrin-A5 E alpha-helix, the E-F loop, the underlying H beta-strand, as well as the nearby B - C loop, which define a distinct third surface required for oligomerization and activation of EphA3 signaling. Together with a corresponding third surface region identified recently outside of the minimal ephrin binding domain of EphA3, our findings provide experimental evidence for the essential contribution of three distinct protein-interaction interfaces to assemble functional EphA3 signaling complexes.