Huoltoasemakiinteistöjen arviointiprosessi ja arviointimenetelmät: Case-huoltamokiinteistön arvonmääritys

The purpose of this research is to examine the appraisal of service station real estate. This is a case research and the case service station is located in Kanta-Häme region in Finland. In the empirical part data consisted of national land survey of Finland’s data, Case corporations financial statements and Haahtela-Kehitys Oy: real estate appraisal 2013 instructions. The aim of this research was to find out whether there is a most suitable method for the appraisal of service station real estate. In this research it was not possible to conclude that one of the appraisal methods was more suitable than the other for service station real estate appraisal. It can be pointed out that selection of the appraisal method depends on several factors such as purpose of the appraisal, available information and the evaluator’s point of view.

Simulation of the Interaction Mean Free Path between Neutrons and TRISO Particles

The interaction mean free path between neutrons and TRISO particles is simulated using scripts written in MATLAB to solve the increasing error present with an increase in the packing factor in the reactor physics code Serpent. Their movement is tracked both in an unbounded and in a bounded space. Their track is calculated, depending on the program, linearly directly using the position vectors of the neutrons and the surface equations of all the fuel particles; by dividing the space in multiple subspaces, each of which contain a fraction of the total number of particles, and choosing the particles from those subspaces through which the neutron passes through; or by choosing the particles that lie within an infinite cylinder formed on the movement axis of the neutron. The estimate from the current analytical model, based on an exponential distribution, for the mean free path, utilized by Serpent, is used as a reference result. The results from the implicit model in Serpent imply a too long mean free path with high packing factors. The received results support this observation by producing, with a packing factor of 17 %, approximately 2.46 % shorter mean free path compared to the reference model. This is supported by the packing factor experienced by the neutron, the simulation of which resulted in a 17.29 % packing factor. It was also observed that the neutrons leaving from the surfaces of the fuel particles, in contrast to those starting inside the moderator, do not follow the exponential distribution. The current model, as it is, is thus not valid in the determination of the free path lengths of the neutrons.

Do retail investors use technical analysis? Evidence from Stuttgart stock exchange.

Tutkielma käyttää automaattista kuviontunnistusalgoritmia ja yleisiä kahden liukuvan keskiarvon leikkauspiste –sääntöjä selittääkseen Stuttgartin pörssissä toimivien yksityissijoittajien myynti-osto –epätasapainoa ja siten vastatakseen kysymykseen ”käyttävätkö yksityissijoittajat teknisen analyysin menetelmiä kaupankäyntipäätöstensä perustana?” Perusolettama sijoittajien käyttäytymisestä ja teknisen analyysin tuottavuudesta tehtyjen tutkimusten perusteella oli, että yksityissijoittajat käyttäisivät teknisen analyysin metodeja. Empiirinen tutkimus, jonka aineistona on DAX30 yhtiöiden data vuosilta 2009 – 2013, ei tuottanut riittävän selkeää vastausta tutkimuskysymykseen. Heikko todistusaineisto näyttää kuitenkin osoittavan, että yksityissijoittajat muuttavat kaupankäyntikäyttäytymistänsä eräiden kuvioiden ja leikkauspistesääntöjen ohjastamaan suuntaan.

Development of an HTR-10 model in the Serpent reactor physics code

The use of exact coordinates of pebbles and fuel particles of pebble bed reactor modelling becoming possible in Monte Carlo reactor physics calculations is an important development step. This allows exact modelling of pebble bed reactors with realistic pebble beds without the placing of pebbles in regular lattices. In this study the multiplication coefficient of the HTR-10 pebble bed reactor is calculated with the Serpent reactor physics code and, using this multiplication coefficient, the amount of pebbles required for the critical load of the reactor. The multiplication coefficient is calculated using pebble beds produced with the discrete element method and three different material libraries in order to compare the results. The received results are lower than those from measured at the experimental reactor and somewhat lower than those gained with other codes in earlier studies.

Esikasvin vaikutus viljojen, öljykasvien ja perunan viljelyyn

Tässä oppaassa käsitellään viljelykierrolla saatavia hyötyjä. Viljelykierrolla on suotuisa vaikutus maan rakenteeseen ja se vähentää kasvitautien, rikkakasvien ja tuhoeläinten määrää kasvustoissa. Tarkastelussa kevätöljykasvit, syysviljat, kevätvehnä ja peruna ovat parhaita esikasveja muille viljelyskasveille. Näiden jälkeen viljeltävien kasvien hehtaarisadot nousivat parhaimmillaan yli 500 kg. Öljykasvi esikasvina saattaa parantaa kevätvehnän ja ohran laatua. Säästä johtuvien epävarmuustekijöiden takia on vaikeaa antaa yksiselitteistä ohjeistusta typpilannoituksen vähentämiseksi muiden kuin palkokasvien jälkeen. Tämä opas on osa TEHO Plus -hankkeen tuottamaa materiaalia viljelijöiden ja neuvojien käyttöön, mikä täydentää hankkeen laatimaa Maatilan ympäristökäsikirjaa.

Relander presidentinlinnassa

Kirjallisuusarvostelu

Tuotannon make or buy– päätöksentekoprosessi kansainvälisessä teknologiayrityksessä Case: Yritys X

Tutkimuksen tarkoituksena tutkia millaisia make or buy- työkaluja on olemassa ja millaiset teoriat vaikuttavat make or buy- päätösten taustalla. Tutkimuksessa tutkittiin myös miten nämä ilmiöt ja mallit vaikuttavat ja toteutuvat käytännössä teknologia-alalla

Surface studies of limestones and dolostones : characterisation using various techniques and batch dissolution experiments with hydrochloric acid solutions

In this thesis, stepwise titration with hydrochloric acid was used to obtain chemical reactivities and dissolution rates of ground limestones and dolostones of varying geological backgrounds (sedimentary, metamorphic or magmatic). Two different ways of conducting the calculations were used: 1) a first order mathematical model was used to calculate extrapolated initial reactivities (and dissolution rates) at pH 4, and 2) a second order mathematical model was used to acquire integrated mean specific chemical reaction constants (and dissolution rates) at pH 5. The calculations of the reactivities and dissolution rates were based on rate of change of pH and particle size distributions of the sample powders obtained by laser diffraction. The initial dissolution rates at pH 4 were repeatedly higher than previously reported literature values, whereas the dissolution rates at pH 5 were consistent with former observations. Reactivities and dissolution rates varied substantially for dolostones, whereas for limestones and calcareous rocks, the variation can be primarily explained by relatively large sample standard deviations. A list of the dolostone samples in a decreasing order of initial reactivity at pH 4 is: 1) metamorphic dolostones with calcite/dolomite ratio higher than about 6% 2) sedimentary dolostones without calcite 3) metamorphic dolostones with calcite/dolomite ratio lower than about 6% The reactivities and dissolution rates were accompanied by a wide range of experimental techniques to characterise the samples, to reveal how different rocks changed during the dissolution process, and to find out which factors had an influence on their chemical reactivities. An emphasis was put on chemical and morphological changes taking place at the surfaces of the particles via X-ray Photoelectron Spectroscopy (XPS) and Scanning Electron Microscopy (SEM). Supporting chemical information was obtained with X-Ray Fluorescence (XRF) measurements of the samples, and Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) and Inductively Coupled Plasma-Optical Emission Spectrometry (ICP-OES) measurements of the solutions used in the reactivity experiments. Information on mineral (modal) compositions and their occurrence was provided by X-Ray Diffraction (XRD), Energy Dispersive X-ray analysis (EDX) and studying thin sections with a petrographic microscope. BET (Brunauer, Emmet, Teller) surface areas were determined from nitrogen physisorption data. Factors increasing chemical reactivity of dolostones and calcareous rocks were found to be sedimentary origin, higher calcite concentration and smaller quartz concentration. Also, it is assumed that finer grain size and larger BET surface areas increase the reactivity although no certain correlation was found in this thesis. Atomic concentrations did not correlate with the reactivities. Sedimentary dolostones, unlike metamorphic ones, were found to have porous surface structures after dissolution. In addition, conventional (XPS) and synchrotron based (HRXPS) X-ray Photoelectron Spectroscopy were used to study bonding environments on calcite and dolomite surfaces. Both samples are insulators, which is why neutralisation measures such as electron flood gun and a conductive mask were used. Surface core level shifts of 0.7 ± 0.1 eV for Ca 2p spectrum of calcite and 0.75 ± 0.05 eV for Mg 2p and Ca 3s spectra of dolomite were obtained. Some satellite features of Ca 2p, C 1s and O 1s spectra have been suggested to be bulk plasmons. The origin of carbide bonds was suggested to be beam assisted interaction with hydrocarbons found on the surface. The results presented in this thesis are of particular importance for choosing raw materials for wet Flue Gas Desulphurisation (FGD) and construction industry. Wet FGD benefits from high reactivity, whereas construction industry can take advantage of slow reactivity of carbonate rocks often used in the facades of fine buildings. Information on chemical bonding environments may help to create more accurate models for water-rock interactions of carbonates.

Elinkaarilaskentamallit ja niiden kritiikki

Tässä työssä tarkastellaan elinkaarilaskentamalleja ja niihin liittyvää kritiikkiä. Työn tarkoitus on kartoittaa olemassa olevia malleja ja niiden erityispiirteitä. Toisena tutkimustavoitteena pohditaan elinkaarilaskentaan liittyvää kritiikkiä ja epäkohtia. Työssä esitellään elinkaarilaskennan käsitteitä, teoriaa, taustaa ja malleja. Työhön on valittu käsiteltäväksi 10 erilaista elinkaarilaskentamallia, joiden ominaisuuksia tarkastellaan. Kritiikkiä elinkaarilaskentaa kohtaan tarkastellaan omana kokonaisuutenaan. Päähavaintoina elinkaarilaskentamallit ovat spesifejä ja soveltuvat pitkälti vain niiden alkuperäiseen laskentakohteeseen. Valituista malleista on havaittavissa kolme keskeistä pääsuuntausta, joihin laskenta keskittyy. Nämä suuntaukset ovat ympäristökeskeiset, huoltokeskeiset ja optimointikeskeiset LCC-mallit.