Validity of silhouette showcards as a measure of body size and obesity in a population in the African region : a practical research tool for general-purpose surveys.

BACKGROUND: The purpose of this study is to validate the Pulvers silhouette showcard as a measure of weight status in a population in the African region. This tool is particularly beneficial when scarce resources do not allow for direct anthropometric measurements due to limited survey time or lack of measurement technology in face-to-face general-purpose surveys or in mailed, online, or mobile device-based surveys. METHODS: A cross-sectional study was conducted in the Republic of Seychelles with a sample of 1240 adults. We compared self-reported body sizes measured by Pulvers' silhouette showcards to four measurements of body size and adiposity: body mass index (BMI), body fat percent measured, waist circumference, and waist to height ratio. The accuracy of silhouettes as an obesity indicator was examined using sex-specific receiver operator curve (ROC) analysis and the reliability of this tool to detect socioeconomic gradients in obesity was compared to BMI-based measurements. RESULTS: Our study supports silhouette body size showcards as a valid and reliable survey tool to measure self-reported body size and adiposity in an African population. The mean correlation coefficients of self-reported silhouettes with measured BMI were 0.80 in men and 0.81 in women (P < 0.001). The silhouette showcards also showed high accuracy for detecting obesity as per a BMI ≥ 30 (Area under curve, AUC: 0.91/0.89, SE: 0.01), which was comparable to other measured adiposity indicators: fat percent (AUC: 0.94/0.94, SE: 0.01), waist circumference (AUC: 0.95/0.94, SE: 0.01), and waist to height ratio (AUC: 0.95/0.94, SE: 0.01) amongst men and women, respectively. The use of silhouettes in detecting obesity differences among different socioeconomic groups resulted in similar magnitude, direction, and significance of association between obesity and socioeconomic status as when using measured BMI. CONCLUSIONS: This study highlights the validity and reliability of silhouettes as a survey tool for measuring obesity in a population in the African region. The ease of use and cost-effectiveness of this tool makes it an attractive alternative to measured BMI in the design of non-face-to-face online- or mobile device-based surveys as well as in-person general-purpose surveys of obesity in social sciences, where limited resources do not allow for direct anthropometric measurements.

Vestibular Schwannoma: The Evolution of Hearing and Tumor Size in Natural Course and after Treatment by LINAC Stereotactic Radiosurgery.

OBJECTIVE: To review the natural course of tumor size and hearing during conservative management of 151 patients with unilateral vestibular schwannoma (VS), and to evaluate the same parameters for the part of the group (n = 84) who were treated by LINAC stereotactic radiosurgery (SRS). METHODS: In prospectively collected data, patients underwent MRI and complete audiovestibular tests at inclusion, during the conservative management period and after SRS. Hearing was graded according to the Gardner-Robertson (GR) scale and tumor size according to Koos. Statistics were performed using Kaplan-Meier survival analysis and multivariate analyses including linear and logistic regression. Specific insight was given to patients with serviceable hearing. RESULTS: During the conservative management period (mean follow-up time: 24 months, range: 6-96), the annual risk of GR class degradation was 6% for GRI and 15% for GR II patients. Hearing loss as an initial symptom was highly predictive of further hearing loss (p = 0.003). Tumor growth reached 25%. For SRS patients, functional hearing preservation was 51% at 1 year and 36% at 3 years. Tumor control was 94 and 91%, respectively. CONCLUSION: In VS patients, hearing loss at the time of diagnosis is a predictor of poorer hearing outcome. LINAC SRS is efficient for tumor control. Patients who preserved their pretreatment hearing presented less hearing loss per year after SRS than before treatment, suggesting a protective effect of SRS when cochlear function can be preserved.

Tipping the scales: Evolution of the allometric slope independent of average trait size.

The scaling of body parts is central to the expression of morphology across body sizes and to the generation of morphological diversity within and among species. Although patterns of scaling-relationship evolution have been well documented for over one hundred years, little is known regarding how selection acts to generate these patterns. In part, this is because it is unclear the extent to which the elements of log-linear scaling relationships-the intercept or mean trait size and the slope-can evolve independently. Here, using the wing-body size scaling relationship in Drosophila melanogaster as an empirical model, we use artificial selection to demonstrate that the slope of a morphological scaling relationship between an organ (the wing) and body size can evolve independently of mean organ or body size. We discuss our findings in the context of how selection likely operates on morphological scaling relationships in nature, the developmental basis for evolved changes in scaling, and the general approach of using individual-based selection experiments to study the expression and evolution of morphological scaling.

Cooperation in R&D, firm size and type of partnership: Evidence for the Spanish automotive industry

This paper aims to analyse cooperation in R&D in the automobile industry in Spain. It first examines to what extent firms cooperate with external actors in the field of technological innovation, and if so, with what type of cooperation partner, paying special attention to the differentiation according to the size of the firms. Second, it aims to study how the firm’s size may affect not only the decision of cooperating but also with which type of partner, while controlling for other determinants that have been considered in the literature as main drivers of collaborative activities in R&D. We use data provided by the Technological Innovation Panel in the 2006-2008 period for firms in the automotive sector. We estimate a bivariate probit model that takes into account the two types of cooperation mostly present in the automotive industry, vertical and institutional, explicitly considering the interdependencies that may arise in the simultaneous choice of both.

Ideal Body Size as a Mediator for the Gender-Specific Association Between Socioeconomic Status and Body Mass Index: Evidence From an Upper-Middle-Income Country in the African Region.

While obesity continues to rise globally, the associations between body size, gender, and socioeconomic status (SES) seem to vary in different populations, and little is known on the contribution of perceived ideal body size in the social disparity of obesity in African countries. We examined the gender and socioeconomic patterns of body mass index (BMI) and perceived ideal body size in the Seychelles, a middle-income small island state in the African region. We also assessed the potential role of perceived ideal body size as a mediator for the gender-specific association between SES and BMI. A population-based survey of 1,240 adults aged 25 to 64 years conducted in December 2013. Participants' BMI was calculated based on measured weight and height; ideal body size was assessed using a nine-silhouette instrument. Three SES indicators were considered: income, education, and occupation. BMI and perceived ideal body size were both higher among men of higher versus lower SES (p< .001) but lower among women of higher versus lower SES (p< .001), irrespective of the SES indicator used. Multivariate analysis showed a strong and direct association between perceived ideal body size and BMI in both men and women (p< .001) and was consistent with a potential mediating role of perceived ideal body size in the gender-specific associations between SES and BMI. Our study emphasizes the importance of gender and socioeconomic differences in BMI and ideal body size and suggests that public health interventions that promote perception of healthy weight could help mitigate SES-related disparities in BMI.

Cooperation in R&D, firm size and type of partnership: Evidence for the Spanish automotive industry

This paper aims to analyse cooperation in R&D in the automobile industry in Spain. It first examines to what extent firms cooperate with external actors in the field of technological innovation, and if so, with what type of cooperation partner, paying special attention to the differentiation according to the size of the firms. Second, it aims to study how the firm’s size may affect not only the decision of cooperating but also with which type of partner, while controlling for other determinants that have been considered in the literature as main drivers of collaborative activities in R&D. We use data provided by the Technological Innovation Panel in the 2006-2008 period for firms in the automotive sector. We estimate a bivariate probit model that takes into account the two types of cooperation mostly present in the automotive industry, vertical and institutional, explicitly considering the interdependencies that may arise in the simultaneous choice of both.

A nonparametric method for the measurement of size diversity with emphasis on data standardization

The most suitable method for estimation of size diversity is investigated. Size diversity is computed on the basis of the Shannon diversity expression adapted for continuous variables, such as size. It takes the form of an integral involving the probability density function (pdf) of the size of the individuals. Different approaches for the estimation of pdf are compared: parametric methods, assuming that data come from a determinate family of pdfs, and nonparametric methods, where pdf is estimated using some kind of local evaluation. Exponential, generalized Pareto, normal, and log-normal distributions have been used to generate simulated samples using estimated parameters from real samples. Nonparametric methods include discrete computation of data histograms based on size intervals and continuous kernel estimation of pdf. Kernel approach gives accurate estimation of size diversity, whilst parametric methods are only useful when the reference distribution have similar shape to the real one. Special attention is given for data standardization. The division of data by the sample geometric mean is proposedas the most suitable standardization method, which shows additional advantages: the same size diversity value is obtained when using original size or log-transformed data, and size measurements with different dimensionality (longitudes, areas, volumes or biomasses) may be immediately compared with the simple addition of ln k where kis the dimensionality (1, 2, or 3, respectively). Thus, the kernel estimation, after data standardization by division of sample geometric mean, arises as the most reliable and generalizable method of size diversity evaluation

Vestibular schwannoma : the evolution of hearing and tumor size in natural course and after treatment by Linac stereotactic radiosurgery

Objectif : D'analyser l'évolution naturelle de la taille de la tumeur et de l'audition chez 151 patients avec schwannome vestibulaire (VS) en suivi et d'évaluer les mêmes paramètres pour une partie du group traité par Radiochirurgie Stéréotaxique Linac (SRS). Méthodes: Etude prospective des patients bilantés par IRM et tests audio-vestibulaires à l'inclusion, pendant la période du suivi et après SRS. L'audition a été gradé selon l'échelle de Gardner-Robertson (GR) et la taille tumorale selon l'échelle de Koos. L'analyse statistique inclut l'analyse de survie de Kaplan-Meier, analyse multivariée avec régression linéaire et logistique. Les patients avec une audition utile ont étés spécifiquement analysés. Résultats: Pendant la période du suivi (moyenne 24 mois, déviation 6-96), le risqué annuel de dégradation de la classe GR était 6% pour les patients GRI et 15% pour les GRII. La perte auditive comme symptôme initial était un facteur signifïcativement prédictif pour une aggravation auditive ultérieure (p=0.003). La croissance tumorale était de 25% à la dernière observation pendant le suivi. Pour les patients traités par Linac, la préservation d'une audition utile était 51% à 1 an et 36% à 3 ans. Le contrôle tumoral était 94 % and 91% respectivement. Conclusion: Chez les patients avec VS, la perte auditive déjà présente au diagnostique est un facteur prédictif négatif pour l'évolution de l'audition. La Radiochirurgie Stéréotaxique Linac est efficace pour le contrôle tumoral. Les patients ayant préservés leur status auditif prétraitement présentent un rythme annuel de perte auditive diminué après SRS compare à celle-ci avant le traitement. Cette constatation suggère un effet protectif potentiel de la SRS, à condition que la fonction cochléaire soit préservée.

A Computer program for estimating population size by the removal method

A BASIC computer program (REMOVAL) was developed to compute in a VAXNMS environment all the calculations of the removal method for population size estimation (catch-effort method for closed populations with constant sampling effort). The program follows the maximum likelihood methodology,checks the failure conditions, applies the appropriate formula, and displays the estimates of population size and catchability, with their standard deviations and coefficients of variation, and two goodness-of-fit statistics with their significance levels. Data of removal experiments for the cyprinodontid fish Aphanius iberus in the Alt Emporda wetlands are used to exemplify the use of the program

Characterization of Mechanically Alloyed Nanocrystalline Fe(Al): Crystallite Size and Dislocation Density

A nanostructured disordered Fe(Al) solid solution was obtained from elemental powders of Fe and Al using a high-energy ball mill. The transformations occurring in the material during milling were studied with the use of X-ray diffraction. In addition lattice microstrain, average crystallite size, dislocation density, and the lattice parameter were determined. Scanning electron microscopy (SEM) was employed to examine the morphology of the samples as a function of milling times. Thermal behaviour of the milled powders was examined by differential scanning calorimetry (DSC). The results, as well as dissimilarity between calorimetric curves of the powders after 2 and 20 h of milling, indicated the formation of a nanostructured Fe(Al) solid solution

Effect of diet composition and ration size on key enzyme activities of glycolysis-gluconeogenesis, pentose phosphate pathway and amino acid metabolism in liver of Sparus aurata

The effects of diet composition and ration size on the activities of key enzymes involved in intermediary metabolism were studied in the liver of gilthead sea bream (Sparus aurata). Highcarbohydrate, low-protein diets stimulated 6-phosphofructo 1-kinase (EC 2.7.1.11), pyruvate kinase (EC 2.7.1.40), glucose-6-phosphate dehydrogenase (EC 1.1.1.49) and 6-phosphogluconate dehydrogenase (EC 1.1.1.44) enzyme activities, while they decreased alanine aminotransferase (EC 2.6.1.2) activity. A high degree of correlation was found between food ration size and the activity of the enzymes 6-phosphofructo 1-kinase, pyruvate kinase, glucose-6-phosphate dehydrogenase (positive correlations) and fructose-1,6-bisphosphatase (EC 3.1.3.11) (negative correlation). These correlations matched well with the high correlation also found between ration size and growth rate in starved fish refed for 22 d. Limited feeding (5 g/kg body weight) for 22 d decreased the activities of the key enzymes for glycolysis and lipogenesis, and alanine aminotransferase activity. The findings presented here indicate a high level of metabolic adaptation to both diet type and ration size. In particular, adaptation of enzyme activities to the consumption of a diet with a high carbohydrate level suggests that a carnivorous fish like Sparus aurata can tolerate partial replacement of protein by carbohydrate in the commercial diets supplied in culture. The relationship between enzyme activities, ration size and fish growth indicates that the enzymes quickly respond to dietary manipulations of cultured fish.

Effect of diet composition and ration size on key enzyme activities of glycolysis-gluconeogenesis, pentose phosphate pathway and amino acid metabolism in liver of Sparus aurata

The effects of diet composition and ration size on the activities of key enzymes involved in intermediary metabolism were studied in the liver of gilthead sea bream (Sparus aurata). Highcarbohydrate, low-protein diets stimulated 6-phosphofructo 1-kinase (EC 2.7.1.11), pyruvate kinase (EC 2.7.1.40), glucose-6-phosphate dehydrogenase (EC 1.1.1.49) and 6-phosphogluconate dehydrogenase (EC 1.1.1.44) enzyme activities, while they decreased alanine aminotransferase (EC 2.6.1.2) activity. A high degree of correlation was found between food ration size and the activity of the enzymes 6-phosphofructo 1-kinase, pyruvate kinase, glucose-6-phosphate dehydrogenase (positive correlations) and fructose-1,6-bisphosphatase (EC 3.1.3.11) (negative correlation). These correlations matched well with the high correlation also found between ration size and growth rate in starved fish refed for 22 d. Limited feeding (5 g/kg body weight) for 22 d decreased the activities of the key enzymes for glycolysis and lipogenesis, and alanine aminotransferase activity. The findings presented here indicate a high level of metabolic adaptation to both diet type and ration size. In particular, adaptation of enzyme activities to the consumption of a diet with a high carbohydrate level suggests that a carnivorous fish like Sparus aurata can tolerate partial replacement of protein by carbohydrate in the commercial diets supplied in culture. The relationship between enzyme activities, ration size and fish growth indicates that the enzymes quickly respond to dietary manipulations of cultured fish.

The Role of Firm Size in Training Provision Decisions: evidence from Spain

The level of training provided by small firms to their employees is below that provided by their larger counterparts. The provision of firm-related training is believed to be associated to certain characteristics of the firm. In this paper we argue that small firms provide fewer training opportunities as they are less likely to be associated with these characteristics than large firms. The suitability of estimating training decisions as a double-decision process is examined here: first, a firm has to decide whether to provide training or not and, second, having decided to do so, the amount of training to provide. The differences in training provision between small and large firms are decomposed in order to analyse the individual contribution of these characteristics to explaining the gap. The results show that small firms face greater obstacles in accessing training and that the main reasons for that are related to their technological activity and the geographical scope of the market in which they operate.

Decomposing differences in total factor productivity across firm size

This paper investigates the extent to which the gap in total factor productivity between small and large firms is due to differences in the endowment of factors determining productivity and to the returns associated with these factors. We place particular emphasis on the contribution of differences in the propensity to innovate and in the use of skilled labor across firms of different size. Empirical evidence from a representative sample of Spanish manufacturing firms corroborates that both differences in endowments and returns to innovation and skilled labor significantly contribute to the productivity gap between small and large firms. In addition, it is observed that the contribution of innovation to this gap is caused only by differences in quantity, while differences in returns have no effect; in the case of human capital, however, most of the effect can be attributed to increasing differences in returns between small and large firms.