Perifrasi verbali con εἰμί più participio nelle varianti del Pentateuco dei LXX

Nell’articolo sono raccolte e discusse le varianti con εἰμί più participio individuate nei testimoni della tradizione testuale del Pentateuco dei LXX; sono considerate anche le varianti con γίνομαι ma solo quelle concerneti il predicato nominale. La finalità è di osservare se vi siano tracce dell’affermazione della perifrasi nelle varianti, eventuali concentrazioni di frequenza insieme a sfumature d’uso, con particolare attenzione alla datazione dei testimoni dove appaiono. Un paragrafo è riservato anche alle varianti di costruzioni con predicato nominale (copula + aggettivo) rispetto a un verbo finito.

Obtenção de uma porcelana dielétrica a partir de matérias-primas do Rio Grande do Norte

The dielectric porcelain is usually obtained by mixing various raw materials proportions and is used in the production of electronic equipment for various applications, from capacitors of high and low Power to insulators for low, medium, high and extra high voltage, which are used in distribution lines and transmission of electricity.This work was directed to the s tudy of technological properties of technic porcelain, made from raw materials extracted from pegmatites found in the regions of Seridó and the Alto Oeste of Rio Grande do Norte, which are made of kaolin, quartz and feldspar, abundant and high quality in these regions. The technic ceramics were obtained by mixing in appropriate levels, kaolin, feldspar, quartz and clay, the last item from a pottery in the city of Sao Gonçalo do Amarante, Rio Grande do Norte. During the development the following characterizations correlated to raw materials were made: laser particle sizing, x-ray diffraction, DTA and TG. The compositions studied were formed by uniaxial pressing at a pressure of 50 MPa and sintered at temperatures ranging from 1150 to 1350ºC and levels (times) of sintering between 30, 60, 90 and 120 minutes. The characterization of the samples were taken from the analysis of weight loss, linear shrinkage, porosity, stoneware curve, bulk density, flexural strength of three points, SEM and X-ray diffraction, TMA, Dielectric and cross Resistivity. The studied materials can be employed in producing the objects used in electrical engineering such as: insulators for low, medium and high-voltage electrical systems, command devices, bushing insulation for transformers, power capacitors, spark plugs, receptacles for fluorescent and incandescent light bulbs and others

Efficient and secure attribute-based signature for monotone predicates

Attribute-based signature (ABS) is a novel cryptographic primitive, which can make the signing party sign a message with fine-grained control over identifying information. ABS only reveals the fact that the verified message must be signed by a user with a set of attributes satisfying a predicate. Thus, ABS can hide any identifying information and make fine-grained control on signing. Presently, many attribute-based signature schemes have been proposed, but most of them are not very efficient. Maji et al. recently presented a complete definition and construction about ABS for monotone predicates and showed three instantiations under their framework for ABS. Although the most practical one of their instantiations is efficient, the instantiation is constructed in the generic group model and has been proved to be insecure. Then, Okamoto et al. proposed an attribute-based signature scheme in the standard model, which can support generalized non-monotone predicates over access structure. However, their scheme is not efficient in practice. In this paper, we present a framework for ABS and show a detailed security model for ABS. Under our framework, we present an attribute-based signature scheme for monotone predicates in the standard model, where we choose the Waters’ signature scheme as the prototype of our attribute-based signature scheme. Compared with the Maji’s scheme in the generic group model, the proposed scheme is constructed in the standard model. Furthermore, compared with the Okamoto’s scheme, the proposed scheme is more efficient by decreasing the computation cost.

High Frequency Class DE Converter Using a Multilayer Coreless PCB Transformer

In modern power electronics equipment, it is desirable to design a low profile, high power density, and fast dynamic response converter. Increases in switching frequency reduce the size of the passive components such as transformers, inductors, and capacitors which results in compact size and less requirement for the energy storage. In addition, the fast dynamic response can be achieved by operating at high frequency. However, achieving high frequency operation while keeping the efficiency high, requires new advanced devices, higher performance magnetic components, and new circuit topology. These are required to absorb and utilize the parasitic components and also to mitigate the frequency dependent losses including switching loss, gating loss, and magnetic loss. Required performance improvements can be achieved through the use of Radio Frequency (RF) design techniques. To reduce switching losses, resonant converter topologies like resonant RF amplifiers (inverters) combined with a rectifier are the effective solution to maintain high efficiency at high switching frequencies through using the techniques such as device parasitic absorption, Zero Voltage Switching (ZVS), Zero Current Switching (ZCS), and a resonant gating. Gallium Nitride (GaN) device technologies are being broadly used in RF amplifiers due to their lower on- resistance and device capacitances compared with silicon (Si) devices. Therefore, this kind of semiconductor is well suited for high frequency power converters. The major problems involved with high frequency magnetics are skin and proximity effects, increased core and copper losses, unbalanced magnetic flux distribution generating localized hot spots, and reduced coupling coefficient. In order to eliminate the magnetic core losses which play a crucial role at higher operating frequencies, a coreless PCB transformer can be used. Compared to the conventional wire-wound transformer, a planar PCB transformer in which the windings are laid on the Printed Board Circuit (PCB) has a low profile structure, excellent thermal characteristics, and ease of manufacturing. Therefore, the work in this thesis demonstrates the design and analysis of an isolated low profile class DE resonant converter operating at 10 MHz switching frequency with a nominal output of 150 W. The power stage consists of a class DE inverter using GaN devices along with a sinusoidal gate drive circuit on the primary side and a class DE rectifier on the secondary side. For obtaining the stringent height converter, isolation is provided by a 10-layered coreless PCB transformer of 1:20 turn’s ratio. It is designed and optimized using 3D Finite Element Method (FEM) tools and radio frequency (RF) circuit design software. Simulation and experimental results are presented for a 10-layered coreless PCB transformer operating in 10 MHz.

Magnetic multilayer fabrication technology with selective activation of SU-8 films

Developing magnetic multilayers are essential for reducing the core eddy current losses in the integrated power magnetic components (inductors/transformers). PVD based processes are typically used to achieve the multilayers with thin dielectric spacers. However, those processes are costly, and can be difficult to integrate. It is evident that cost effective alternative is needed. In recent years, electrochemical processes have been investigated to address these issues. One such method would be to successive metallization of insulating photoresists acting as spacer layer (such as SU-8) with soft magnetic films (such as Ni-Fe-Co alloys). This paper describes an experimental procedure to fabricate magnetic multilayers with a thin variant of SU-8 2 (< 1.5 µm) as inter-layers for integrated micro-inductors/transformers for power conversion applications.

A Grammar of Tajio. A Language Spoken in Central Sulawesi

This work is a description of Tajio, a Western Malayo-Polynesian language spoken in Central Sulawesi, Indonesia. It covers the essential aspects of Tajio grammar without being exhaustive. Tajio has a medium sized phoneme inventory consisting of twenty consonants and five vowels. The language does not have lexical (word) stress; rather, it has a phrasal accent. This phrasal accent regularly occurs on the penultimate syllable of an intonational phrase, rendering this syllable auditorily prominent through a pitch rise. Possible syllable structures in Tajio are (C)V(C). CVN structures are allowed as closed syllables, but CVN syllables in word-medial position are not frequent. As in other languages in the area, the only sequence of consonants allowed in native Tajio words are sequences of nasals followed by a homorganic obstruent. The homorganic nasal-obstruent sequences found in Tajio can occur word-initially and word-medially but never in word-final position. As in many Austronesian languages, word class classification in Tajio is not straightforward. The classification of words in Tajio must be carried out on two levels: the morphosyntactic level and the lexical level. The open word classes in Tajio consist of nouns and verbs. Verbs are further divided into intransitive verbs (dynamic intransitive verbs and statives) and dynamic transitive verbs. Based on their morphological potential, lexical roots in Tajio fall into three classes: single-class roots, dual-class roots and multi-class roots. There are two basic transitive constructions in Tajio: Actor Voice and Undergoer Voice, where the actor or undergoer argument respectively serves as subjects. It shares many characteristics with symmetrical voice languages, yet it is not fully symmetric, as arguments in AV and UV are not equally marked. Neither subjects nor objects are marked in AV constructions. In UV constructions, however, subjects are unmarked while objects are marked either by prefixation or clitization. Evidence from relativization, control and raising constructions supports the analysis that AV and UV are in fact transitive, with subject arguments and object arguments behaving alike in both voices. Only the subject can be relativized, controlled, raised or function as the implicit subject of subjectless adverbial clauses. In contrast, the objects of AV and UV constructions do not exhibit these features. Tajio is a predominantly head-marking language with basic A-V-O constituent order. V and O form a constituent, and the subject can either precede or follow this complex. Thus, basic word order is S-V-O or V-O-S. Subject, as well as non-subject arguments, may be omitted when contextually specified. Verbs are marked for voice and mood, the latter of which is is obligatory. The two values distinguished are realis and non-realis. Depending on the type of predicate involved in clause formation, three clause types can be distinguished: verbal clauses, existential clauses and non-verbal clauses. Tajio has a small number of multi-verbal structures that appear to qualify as serial verb constructions. SVCs in Tajio always include a motion verb or a directional.

Screening a Case Base for Stroke Disease Detection

Stroke stands for one of the most frequent causes of death, without distinguishing age or genders. Despite representing an expressive mortality fig-ure, the disease also causes long-term disabilities with a huge recovery time, which goes in parallel with costs. However, stroke and health diseases may also be prevented considering illness evidence. Therefore, the present work will start with the development of a decision support system to assess stroke risk, centered on a formal framework based on Logic Programming for knowledge rep-resentation and reasoning, complemented with a Case Based Reasoning (CBR) approach to computing. Indeed, and in order to target practically the CBR cycle, a normalization and an optimization phases were introduced, and clustering methods were used, then reducing the search space and enhancing the cases re-trieval one. On the other hand, and aiming at an improvement of the CBR theo-retical basis, the predicates` attributes were normalized to the interval 0…1, and the extensions of the predicates that match the universe of discourse were re-written, and set not only in terms of an evaluation of its Quality-of-Information (QoI), but also in terms of an assessment of a Degree-of-Confidence (DoC), a measure of one`s confidence that they fit into a given interval, taking into account their domains, i.e., each predicate attribute will be given in terms of a pair (QoI, DoC), a simple and elegant way to represent data or knowledge of the type incomplete, self-contradictory, or even unknown.

The Branches of Large Electricity Companies in Portugal: From Trade to the Transfer and Adaptation of Technology (20th Century)

In the last decade of the 19th and first decades of the 20th century there was a movement of capital and engineers from the central and northern Europe to the countries of southern Europe and other continents. Large companies sought to obtain concessions and establish branches in Portugal, favouring the circulation of technical knowledge and transfer of technology for Portuguese industry. Among the various examples of the representatives of foreign companies in Portugal we find Jayme da Costa Ltd. established in 1916 in Lisbon, which was a branch of the Swedish company ASEA, as well as STAAL, ATLAS DIESEL (Sweden), Landis & GYR (Switzerland), Electro Helios, etc.. Another example is EFACEC a company founded in 1948 in Porto, that was a partnership between the Portuguese company CUF – Companhia União Fabril, and ACEC – Ateliers de Constructions Électriques de Charleroi and a small entreprise Electro-Moderna Ldª. This enterprise started the industrial production of electric motors and transformers, and later on acquired a substantial share of the national production of electrical equipment. Using Estatística das Instalações Elétricas em Portugal (Statistics on Electrical Installations in Portugal) from 1928 until 1950 we can identify the foreign enterprises acting in the Portuguese market: Siemens, B.B.C, ASEA, Oerlikon, etc. We can also establish a relationship between the development of the electric network and the growth of production and consumption of electricity in the principal urban centres. Finally we see how foreign firms were a stimulus to the creation of national enterprises, especially those of small scale, in Portugal.