Microestrutura e resistência à corrosão do Ti c.p. soldado a laser utilizando em prótese sobre implantes

Foram realizados estudos para avaliar a microestrutura, a dureza e a resistência à corrosão do titânio comercialmente puro-Ti c.p. soldado por laser e utilizado na confecção de prótese sobre implantes. Verificou-se que na soldagem a laser a microestrutura apresentou três regiões distintas: o cordão de solda, a zona afetada pelo calor - ZAC e o metal base. O Ti c.p. possui microestrutura granular, a microestrutura do cordão de solda é mais refinada e de maior dureza do que o metal base. A ZAC obtida por este processo de soldagem foi relativamente pequena quando comparada com o processo de soldagem por brasagem. Os ensaios eletroquímicos mostraram que a região da solda apresentou menor resistência à corrosão em meio de NaCl 0,15 molL-1 à temperatura ambiente.

Estudo microestrutural e resistência à corrosão de uma liga de Au soldada a laser, empregada em prótese sobre implantes

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

O uso da prótese na correção das hérnias da parede abdominal é um avanço, mas o seu uso indiscriminado, um abuso

The objective is to alert the surgeon about the indiscriminate use of synthetic prosthesis in the correction of inguinal and incisional hernias. The authors provide a brief history of surgery on hernias and a review of the literature, showing the importance of classifying inguinal hernias to fit the type of surgical correction with the defect found, abstaining from treating all hernias, with the same type of surgical procedure. In our opinion, small indirect inguinal hernias (type 1 and 2 of Gilbert) and hernias in women must not, in general, be treated with prostheses. The synthetic material should be reserved for direct and large indirect hernias. Even so, this attitude, besides determining a higher cost for the procedure, can lead to important complications such as infection, rejection, fistula formation, chronic pain, alterations in spermatogenesis and the possibility of carcinogenesis, according to more recent reports. The physiology and anatomy of the abdominal wall should be considered when dealing with incisional hernia corrections, where the surgeon can choose among many techniques to correct those defects, and in selected cases, utilize synthetic material. We conclude that although the use of biomaterials has constituted a great advance in surgery for abdominal wall hernia corrections because they decrease recurrences, and permit treatment of large abdominal hernias, the indiscriminate prosthesis usage is an abuse, and it can determine many serious complications, certainly avoidable with a well indicated non mesh technique .

Prótese intra-ocular de resina acrílica em cães e gatos

Foram atendidos no Hospital Veterinário da Faculdade de Medicina Veterinária e Zootecnia da Unesp - Campus de Botucatu, 11 animais (oito cães e três gatos), com alterações oftálmicas unilaterais graves que levaram à perda total da função ocular (protrusão de globo com injúria nervosa e estrutural, perfurações de córnea com perda de conteúdo intra-ocular e endoftalmites, entre outras). Os animais, com idades entre dois meses e 10 anos, foram submetidos à evisceração e posterior inclusão de esfera de resina acrílica (metilmetacrilato) na capa córneo-escleral ou escleral. As esferas foram previamente confeccionadas e esterilizadas por autoclavagem. No pós-operatório foram utilizados antiinflamatórios e antibioticoterapia tópica combinada ou não a sistêmica. O período de observação variou de 2 meses a 3 anos e os aspectos avaliados foram secreção ocular, blefarospasmo, sinais de desconforto e estética. Obtiveram-se resultados satisfatórios em oito casos. Concluiu-se que a resina acrílica pode ser uma alternativa para uso como inclusão em cavidade anoftálmica.

Jogo da Minoria: um modelo baseado em agentes aplicado ao mercado financeiro

Nos últimos anos houve uma contribuição significativa dos físicos para a construção de um tipo de modelo baseado em agentes que busca reproduzir, em simulação computacional, o comportamento do mercado financeiro. Esse modelo, chamado Jogo da Minoria consiste de um grupo de agentes que vão ao mercado comprar ou vender ativos. Eles tomam decisões com base em estratégias e, por meio delas, os agentes estabelecem um intrincado jogo de competição e coordenação pela distribuição da riqueza. O modelo tem demonstrado resultados bastante ricos e surpreendentes, tanto na dinâmica do sistema como na capacidade de reproduzir características estatísticas e comportamentais do mercado financeiro. Neste artigo, são apresentadas a estrutura e a dinâmica do Jogo da Minoria, bem como as contribuições recentes relacionadas ao Jogo da Minoria denominado de Grande Canônico, que é um modelo mais bem ajustado às características do mercado financeiro e reproduz as regularidades estatísticas do preço dos ativos chamadas fatos estilizados.

Ação de antibióticos e quimioterápicos sobre alguns agentes baxterianos da mastite bovina, isolados da água utilizada no processo de obtenção do leite

Three strains of Staphylococcus aureus, 73 coagulase negative Staphylococcus and 28 Escherichia coli strains,isolated from water samples from 10 dairy farms, were tested for ''in vitro'' sensitivity to antibiotics and chemotherapeutics. The results showed that all samples isolated presented resistance to at least one active drug tested. The percentage of S. aureus, coagulase negative Staphylococcus and E. coli strains that exhibited resistance to the three active drugs were 100.00%, 84.93% and 71.43%, respectively. These results are important mainly due to the role of water as a vehicle for transmission of mastitis bacterial agents during the milking process.

Estudo Comparativo de Juntas Soldadas a TIG e Laser Empregando-se Ti com Pureza Comercial Utilizado em Prótese sobre Implantes

Welding in the dentistry has been used for great part of the specialized dentist-surgeons in the implants area to solve prosthesis supported by implant adaptation problems. The development of new equipments Laser and TIG allowed a larger use of these processes in the prosthesis production. In this work, it was studied welded joints made by Laser and TIG, using commercial purity titanium, cpTi, applied in prosthesis supported by implants. The weld characterizations were carried out by light microscopy, EDS_elementary mapping, microhardness and tensile test. Through metallographic characterization, the weld bead presented a martensitic microstructure in the Laser welding process, originated from shear provoked by deformations in the lattice. This caused structural changes of the transformed area, which determines a fine plate-like morphology. In the weld bead from TIG, besides presenting higher hardness, was observed formation of Widmansttaten structure, which is characteristic of a geometric model, resulted of new phase formation along of the crystallographic plans. The martensitic structure is more refined than Widmansttaten structure, due to the high-speed cooling (10(3)degrees C/s) imposed by the Laser process.

Estudo da penetração de agentes ácidos para o condicionamento do esmalte dental em cimentos à base de hidróxido de cálcio.

It was verified the penetration of phosphoric acid into 3 commercial calcium hydroxide-based cements (Life, Renew and Prisma VLC Dycal). The colorimetric method employed permitted the identidication of phosphorus amount in representative samples of 6 successive layers 0.1 mm thick of each material. The acid etching used were the commercial products Scotchbond Etching Gel--3M at 36.114% by weight and Solução Condicionadora--Johnson & Johnson at 36.054% by weight. The contact time was 60 seconds. The result showed that layers 0.1 mm tick for Life and Prisma VLC Dycal and 0.2 mm thick for Renew were able to block the penetration of phosphoric acid solution whereas layers 0.1 mm thick for the 3 cements were able to block the penetration of phosphoric acid gel.

Influência de diferentes agentes de fixação na resistência de união, por tração, de ligas metálicas fixadas à dentina.

They were casted pieces using three kinds of alloy (Ni-Cr, Ag-Sn and Cu-Al) with circular and smooth surface. They were cemented to human teeth, on occlusal surface, grounded at dentin level, through three different materials kind (zinc polycarboxylate cement, glassionomer cement and composite). After 24 hours storing, the samples were subjected to the tensile test. The results showed that the samples cemented with composite and the casts made with Ag-Sn alloy had higher bond strength.

Fadiga de grampos de retenção em prótese parcial removível. Efeito de ligas, espessuras e técnicas de fusão. Parte I.

The authors looked for the verification of the fatigue of retentive clasps utilized on the removable partial denture. According to this, it was idealized and built on assay machine, that through movements, simulate the insertion and removal of the clasp for a pattern tooth, manufactured on cobalt-chromium which has all the preparation normally utilized to the correct confection of this type of prosthesis. It was utilized three different commercial alloys based on cobalt-chromium: L1-Biosil; L2-Steldent; L3-Duracron. It was utilized the T clasp of Roach, with was tested upon three different proportions among width and thickness: E1-1.7;E2-2.0 and E3-2.3 and was casted through two casting techniques: F1-oxygen-gas and F2-oxygen-acetylene. The clasps were tested on the machine, which allowed the reading of the number of insertion and removal cycles made until fatigue appeared. The obtained results were submitted to the statistic analysis and the authors concluded that: a) L3 (Duracrom) obtained the best results followed by L1 (Biosil) and finally L3 (Steldent); b) among the analyzed thickness, the best results were obtained by E3, followed by E2 and after this E1; c) form the casting techniques, F2 gave us the best results.

Fadiga de grampos de retenção em prótese parcial removível. Efeito de ligas, espessuras e técnicas de fusão. Parte II.

The authors tested the T clasp of Roach in three differents proportions among width and thickness: E1-1.7; E2-2.0 and E3-2.3, with a constant length of 15 mm. These clasps were casted with three cobalt-chromium alloys (L1-Biosil; L2-Steldent and L3-Duracrom), through two casting techniques (F1-oxygen-gas and F2-oxygen-acetylene). The fatigue of the clasps were verified by using and assay machine, that through movements, simulate the insertion and removal of the clasps for a pattern which were obtained from a premolar, prepared in a surveyor. This machine detect the fatigue of the clasps and count the number of cycles of insertion and removal realized. The obtained results of the interaction between the analysed factors, were submitted to the statistic analysis and the authors concluded that: a) the interaction of factors, Alloy x Thickness, Alloy x Casting Technique and Thickness x Casting Technique did not change the order of effects that the factors showed separately but gave rise to effects of different magnitude for any observed sense; b) the simultaneous interaction of the factors Alloy x Thickness x Casting Technique confirmed the superiority of the L3 alloy, the thickness E3 and the F2 casting technique.

Formulário do perfil psicossocial do paciente anoftálmico com indicação de prótese ocular

The patient with anophthalmia may present feelings of inferiority and rejection. Knowing his/her needs and expectations contribute to a better technical intervention. Purpose: To elaborate a questionnaire of the psychosocial profile of the patient with anophthalmia with indication of ocular prosthesis. Methods: An exploratory research was used to elaborate the questionnaire, by means of a guided interview followed by writing down what was said by the interviewees, who were adult patients of the Bucco-Maxillo-Facial Prosthesis Center of FOSJC - UNESP. The guided interview was made up of 14 items directly related to the future outline of the profile. Each item of the interview resulted in questions of the questionnaire, which was pretested twice before reaching its final version. Results: The patients reported, in the exploratory research, unpleasant feelings with the loss of the eye; relationship shyness; expectations regarding surgery and prosthesis use; a wish to receive explanations and to hold their opinion about the treatment. The questionnaire of the psychosocial profile of the patient with anophthalmia with indication of ocular prosthesis is, therefore, made of 43 questions divided into 5 blocks in order to aid the comprehension of the inquired aspects and to facilitate both the computation of data and discussion, and also to improve the selection of questions according to the objective of the researcher or professional. Conclusions: It was concluded that the questionnaire was viable, can be used in full or by selecting blocks and provide a panorama of the patient's history related to the problem he/she faces, from the loss of the ocular globe to the confection of the prosthesis.

Aspectos toxicológicos do bissulfito e outros agentes tóxicos sobre a síntese de glicerol-3-fosfato desidrogenase citoplasmá tica de levedura de panificação

The synthesis of intracellular glycerol-3-phosphate dehydrogenase (EC 1.1.1.8) in baker's yeast was investigated in submerged culture supplied with glucose or glycerol as sole carbon sources. Inhibitors of the glycolytic pathway, Krebs cycle and respiratory chain did not stimulate glycerol-3-phosphate dehydrogenase synthesis when added in low concentrations in up 7.5 × 10 -5 mol/L. The repression exercised by glucose on the synthesis of glycerol-3-phosphate dehydrogenase in YP-glucose medium was reduced by the addition of fermentation products and of sodium bisulfite. Synthesis of the enzyme was raised 22-110%. However, in YP-glycerol medium, the addition of 0.06% (w/v) sodium bisulfite reduced (29%) the synthesis of the enzyme, while 0.012% (v/v) acetaldehyde stimulated the synthesis of glycerol-3-phosphate dehydrogenase by 12%.

Espectro de agentes etiológicos associados a surtos de doenças transmitidas por alimentos em núcleos receptores turísticos de três regiões geográficas do Estado de São Paulo

Foodborne and waterborne diseases are spread by the consumption of food or water contaminated with bacteria and/or their toxins, viruses, parasites or chemicals. The aim of the research reported here was to establish the spectrum of etiologic agents of foodborne outbreaks at 15 tourist resorts in three geographic regions of the State of Sao Paulo (Brazil). The study was based on the cases reported to the Epidemic Surveillance Center (CVE) of the Public Health Authority of the State of São Paulo (SES), from 2002 to 2005. The tourist centers were chosen at random in three regions of the state (Capital, Interior and Coast) and offered the following attractions: events, agribusiness, cultural history, shopping, town center, gastronomy, health and leisure, sun and sea. Among the bacteria, the results showed that Salmonella spp. were most frequently associated with outbreaks, followed by Shigella spp., enterotoxigenic Escherichia coli, Staphylococcus aureus, Clostridium perfringens, Bacillus cereus and Campylobacter spp. Viruses (Rotavirus and Hepatitis A) played a part in many of the cases, while the frequency of parasites and worm infestations was low in the foodborne disease outbreaks at these resorts. The mixed foods (rice, beans, liver, potatoes, barbecue, juice), fish and poultry were the three commonest vehicles implicated in the outbreaks.