HBsAg seroclearance or seroconversion induced by peg-interferon alpha and lamivudine or adefovir combination therapy in chronic hepatitis B treatment: a meta-analysis and systematic review

Background and aims: Seroclearance or seroconversion of hepatitis B surface antigen (HBsAg) is generally considered as a clinical endpoint. The purpose of the present meta-analysis was to evaluate the effect of combined therapy with pegylated interferon alpha (PEG-IFNα) with or without lamivudine (LAM) or adefovir (ADV) on HBsAg seroclearance or seroconversion in subjects with chronic hepatitis B (CHB). Methods: Randomized controlled trials performed through May 30th 2015 in adults with CHB receiving PEG-IFNα and LAM or ADV combination therapy or monotherapy for 48-52 weeks were included. The Review Manager Software 5.2.0 was used for the meta-analysis. Results: No statistical differences in HBsAg seroclearance (9.9% vs. 7.1%, OR = 1.47, 95% CI: 0.75, 2.90; p = 0.26) or HBsAg seroconversion (4.2% vs. 3.7%, OR = 1.17, 95% CI: 0.57, 2.37; p = 0.67) rates were noticed between PEG-IFNα + LAM and PEG-IFN α + placebo during post-treatment follow-up for 24-26-weeks in subjects with hepatitis Be antigen (HBeAg)-positive CHB. No statistical differences in HBsAg clearance (10.5% vs. 6.4%, OR = 1.68, 95% CI: 0.75, 3.76; p = 0.21) were seen, but statistical differences in HBsAg seroconversion (6.3% vs. 0%, OR = 7.22, 95% CI: 1.23, 42.40; p = 0.03) were observed, between PEG-IFNα + ADV and PEG-IFNα for 48-52 weeks of treatment in subjects with HBeAg-positive CHB. A systematic evaluation showed no differences in HBsAg disappearance and seroconversion rates between PEG-IFNα + placebo and PEG-IFNα + LAM for 48-52 weeks in subjects with HBeAg-positive CHB. A systematic assessment found no differences in HBsAg disappearance and seroconversion rates between PEG-IFNα + placebo and PEG-IFNα + LAM during 24 weeks' to 3 years' follow-up after treatment in subjects with HBeAg-negative CHB. Conclusion: Combined therapy with PEG-IFNα and LAM or ADV was not superior to monotherapy with PEG-IFNα in terms of HBsAg seroclearance or seroconversion.

Pronóstico a largo plazo del trastorno bipolar con episodios mixtos.

122 p.

O tratamento do doente bipolar na consulta de medicina dentária: um caso clínico

Dissertação para obtenção do grau de Mestre no Instituto Superior de Ciências da Saúde Egas Moniz

Ligand-Free Palladium-Catalyzed Oxyarylation of Dihydronaphthal­enes and Chromenequinone with o-Iodophenols and 3-Iodolawsone in PEG-400: An Efficient Synthesis of 5-Carbapterocarpans and Pterocarpanquinones

Dihydronaphthalenes were oxyarylated with o-iodophenols, in PEG-400 at 140 or 170 °C, leading regio- and stereoselectively to 5-carbapterocarpans. By using Pd(OAc)2 (5–10 mol%) as precatalyst and Ag2CO3 (1.1 equiv) as base (conditions A), products were obtained in good to excellent chemical yields, in 5–30 minutes, irrespective of the pattern of substitution the starting materials. Alternatively, when p-hydroxyacetophenone oxime derived palladacycle (1 mol%) was used as precatalyst, and dicyclohexylamine (2 equiv) was used as base (silver-free, conditions B), the corresponding adducts were obtained in moderate to good yields, in 0.5 to 4 hours. Finally, the oxyarylation of dihydronaphthalenes­ and chromenquinone with o-iodophenols and 3-iodolawsone in PEG-400 under conditions A led regio- and stereoselectively to the formation of carbapterocarpanquinones and pterocarpanquinones in moderate yield.

CHARACTERIZATION OF THERMAL AND MECHANICAL PROPERTIES OF POLYPROPYLENE–BASED COMPOSITES FOR FUEL CELL BIPOLAR PLATES AND DEVELOPMENT OF EDUCATIONAL TOOLS IN HYDROGEN AND FUEL CELL TECHNOLOGIES

In this project we developed conductive thermoplastic resins by adding varying amounts of three different carbon fillers: carbon black (CB), synthetic graphite (SG) and multi–walled carbon nanotubes (CNT) to a polypropylene matrix for application as fuel cell bipolar plates. This component of fuel cells provides mechanical support to the stack, circulates the gases that participate in the electrochemical reaction within the fuel cell and allows for removal of the excess heat from the system. The materials fabricated in this work were tested to determine their mechanical and thermal properties. These materials were produced by adding varying amounts of single carbon fillers to a polypropylene matrix (2.5 to 15 wt.% Ketjenblack EC-600 JD carbon black, 10 to 80 wt.% Asbury Carbons’ Thermocarb TC-300 synthetic graphite, and 2.5 to 15 wt.% of Hyperion Catalysis International’s FIBRILTM multi-walled carbon nanotubes) In addition, composite materials containing combinations of these three fillers were produced. The thermal conductivity results showed an increase in both through–plane and in–plane thermal conductivities, with the largest increase observed for synthetic graphite. The Department of Energy (DOE) had previously set a thermal conductivity goal of 20 W/m·K, which was surpassed by formulations containing 75 wt.% and 80 wt.% SG, yielding in–plane thermal conductivity values of 24.4 W/m·K and 33.6 W/m·K, respectively. In addition, composites containing 2.5 wt.% CB, 65 wt.% SG, and 6 wt.% CNT in PP had an in–plane thermal conductivity of 37 W/m·K. Flexural and tensile tests were conducted. All composite formulations exceeded the flexural strength target of 25 MPa set by DOE. The tensile and flexural modulus of the composites increased with higher concentration of carbon fillers. Carbon black and synthetic graphite caused a decrease in the tensile and flexural strengths of the composites. However, carbon nanotubes increased the composite tensile and flexural strengths. Mathematical models were applied to estimate through–plane and in–plane thermal conductivities of single and multiple filler formulations, and tensile modulus of single–filler formulations. For thermal conductivity, Nielsen’s model yielded accurate thermal conductivity values when compared to experimental results obtained through the Flash method. For prediction of tensile modulus Nielsen’s model yielded the smallest error between the predicted and experimental values. The second part of this project consisted of the development of a curriculum in Fuel Cell and Hydrogen Technologies to address different educational barriers identified by the Department of Energy. By the creation of new courses and enterprise programs in the areas of fuel cells and the use of hydrogen as an energy carrier, we introduced engineering students to the new technologies, policies and challenges present with this alternative energy. Feedback provided by students participating in these courses and enterprise programs indicate positive acceptance of the different educational tools. Results obtained from a survey applied to students after participating in these courses showed an increase in the knowledge and awareness of energy fundamentals, which indicates the modules developed in this project are effective in introducing students to alternative energy sources.

Towards person-centered neuroimaging markers for resilience and vulnerability in Bipolar Disorder

Improved clinical care for Bipolar Disorder (BD) relies on the identification of diagnostic markers that can reliably detect disease-related signals in clinically heterogeneous populations. At the very least, diagnostic markers should be able to differentiate patients with BD from healthy individuals and from individuals at familial risk for BD who either remain well or develop other psychopathology, most commonly Major Depressive Disorder (MDD). These issues are particularly pertinent to the development of translational applications of neuroimaging as they represent challenges for which clinical observation alone is insufficient. We therefore applied pattern classification to task-based functional magnetic resonance imaging (fMRI) data of the n-back working memory task, to test their predictive value in differentiating patients with BD (n=30) from healthy individuals (n=30) and from patients' relatives who were either diagnosed with MDD (n=30) or were free of any personal lifetime history of psychopathology (n=30). Diagnostic stability in these groups was confirmed with 4-year prospective follow-up. Task-based activation patterns from the fMRI data were analyzed with Gaussian Process Classifiers (GPC), a machine learning approach to detecting multivariate patterns in neuroimaging datasets. Consistent significant classification results were only obtained using data from the 3-back versus 0-back contrast. Using contrast, patients with BD were correctly classified compared to unrelated healthy individuals with an accuracy of 83.5%, sensitivity of 84.6% and specificity of 92.3%. Classification accuracy, sensitivity and specificity when comparing patients with BD to their relatives with MDD, were respectively 73.1%, 53.9% and 94.5%. Classification accuracy, sensitivity and specificity when comparing patients with BD to their healthy relatives were respectively 81.8%, 72.7% and 90.9%. We show that significant individual classification can be achieved using whole brain pattern analysis of task-based working memory fMRI data. The high accuracy and specificity achieved by all three classifiers suggest that multivariate pattern recognition analyses can aid clinicians in the clinical care of BD in situations of true clinical uncertainty regarding the diagnosis and prognosis.

Pelvic-Floor Rehabilitation, Part 1 : Comparison of Two Surface Electrode Placements During Stimulation of the Pelvic-Floor Musculature in Women Who Are Continent Using Bipolar Interferential Currents

Background and Purpose. Electrical stimulation of the pelvic floor is used as an adjunct in the conservative treatment of urinary incontinence. No consensus exists, however, regarding electrode placements for optimal stimulation of the pelvic-floor musculature. The purpose of this study was to compare two different bipolar electrode placements, one suggested by Laycock and Green (L2) the other by Dumoulin (D2), during electrical stimulation with interferential currents of the pelvic-floor musculature in continent women, using a two-group crossover design. Subjects. Ten continent female volunteers, ranging in age from 20 to 39 years (X̅=27.3, SD=5.6), were randomly assigned to one of two study groups. Methods. Each study group received neuromuscular electrical stimulation (NMES) of the pelvic-floor musculature using both electrode placements, the order of application being reversed for each group. Force of contraction was measured as pressure (in centimeters of water [cm H2O]) exerted on a vaginal pressure probe attached to a manometer. Data were analyzed using a two-way, mixed-model analysis of variance. Results. No difference in pressure was observed between the two electrode placements. Differences in current amplitude were observed, with the D2 electrode placement requiring less current amplitude to produce a maximum recorded pressure on the manometer. Subjective assessment by the subjects revealed a preference for the D2 electrode placement (7 of 10 subjects). Conclusion and Discussion. The lower current amplitudes required with the D2 placement to obtain recordings comparable to those obtained with the L2 technique suggest a more comfortable stimulation of the pelvic-floor muscles. The lower current amplitudes required also suggest that greater increases in pressure might be obtained with the D2 placement by increasing the current amplitude while remaining within the comfort threshold. These results will help to define treatment guidelines for a planned clinical study investigating the effects of NMES and exercise in the treatment of urinary stress incontinence in women postpartum.

Pelvic-Floor Rehabilitation, Part 1 : Comparison of Two Surface Electrode Placements During Stimulation of the Pelvic-Floor Musculature in Women Who Are Continent Using Bipolar Interferential Currents

Background and Purpose. Electrical stimulation of the pelvic floor is used as an adjunct in the conservative treatment of urinary incontinence. No consensus exists, however, regarding electrode placements for optimal stimulation of the pelvic-floor musculature. The purpose of this study was to compare two different bipolar electrode placements, one suggested by Laycock and Green (L2) the other by Dumoulin (D2), during electrical stimulation with interferential currents of the pelvic-floor musculature in continent women, using a two-group crossover design. Subjects. Ten continent female volunteers, ranging in age from 20 to 39 years (X̅=27.3, SD=5.6), were randomly assigned to one of two study groups. Methods. Each study group received neuromuscular electrical stimulation (NMES) of the pelvic-floor musculature using both electrode placements, the order of application being reversed for each group. Force of contraction was measured as pressure (in centimeters of water [cm H2O]) exerted on a vaginal pressure probe attached to a manometer. Data were analyzed using a two-way, mixed-model analysis of variance. Results. No difference in pressure was observed between the two electrode placements. Differences in current amplitude were observed, with the D2 electrode placement requiring less current amplitude to produce a maximum recorded pressure on the manometer. Subjective assessment by the subjects revealed a preference for the D2 electrode placement (7 of 10 subjects). Conclusion and Discussion. The lower current amplitudes required with the D2 placement to obtain recordings comparable to those obtained with the L2 technique suggest a more comfortable stimulation of the pelvic-floor muscles. The lower current amplitudes required also suggest that greater increases in pressure might be obtained with the D2 placement by increasing the current amplitude while remaining within the comfort threshold. These results will help to define treatment guidelines for a planned clinical study investigating the effects of NMES and exercise in the treatment of urinary stress incontinence in women postpartum.

Novel dual D3R/GSK-3β modulators: an innovative multitarget strategy for bipolar disorder

Among the psychiatric diseases, bipolar disorder (BD) is the sixth leading cause of disability with a prevalence up to 4 % worldwide. BD is a complex neuropsychiatric condition which alternates episodes of mania with symptoms of depression. Although the neurobiological pathways are not completely clarified, the dopamine (DA) hypothesis, recognized as the leading theory explaining the pathophysiology of the malady, states that the dramatically compromised homeostatic regulation of dopaminergic circuits leads to alternated changes in DA neurotransmission. Modulation of D2 and D3 receptors (D2/3R) through partial agonists represents the first-line therapeutic strategy for psychiatric diseases. Moreover, a deregulation of the enzyme glycogen synthase kinase-3β (GSK-3β) has been reported as peculiar feature of BD. In this scenario, the concomitant modulation of D3R and GSK-3β, by employing multitarget compounds, could offer promises to achieve an effective cure of this illness. In the light of these findings, we rationally envisaged the pharmacophoric model at the basis of the design of several D3R partial agonists, suitable to be exploited for the dual D3R/GSK-3β ligand design. Thus, synthetic efforts were addressed to develop a first set of hybrid molecules able to concurrently modulate the selected targets. For a chemical structure point of view, we employed different spacers to combine a substituted aryl-piperazine moiety, reported in previously discovered D3R modulators, with a pyrazole-based fragment, already identified in GSK-3β inhibitors. A fluorescent and a cellular functional assays were carried out to assess the activity of all synthetized compounds against GSK-3β and on D3R, respectively. Most of the derivatives proved to effectively modulate both GSK-3β and D3R with potencies in the low-µM and low-nM range, respectively. The consistent biological data allowed us to identify some lead candidates worth to be further modified with the aim to optimize their biological profile and to perform a structure-activity relationship (SAR) study.

Nuovo copoliestere multiblocco a base di acido 2,5-furandicarbossilico contenente sequenze PEG-like per la realizzazione di film compostabili per il packaging flessibile ecosostenibile

La società civile pone oggi particolare attenzione al tema della sostenibilità ambientale, di qui la crescente necessità di progettare e sviluppare imballaggi ecosostenibili e/o biodegradabili con elevate prestazioni. I materiali polimerici, in particolare i poliesteri, presentano sicuramente una valida soluzione. Un monomero proveniente da fonti rinnovabili che consente la realizzazione di polimeri dalle eccellenti proprietà meccaniche e barriera è l'acido 2,5-furandicarbossilico. Tuttavia, i poliesteri furan-based non possiedono le caratteristiche di biodegradabilità desiderate, inoltre sono materiali duri e fragili e quindi non idonei per l’imballaggio flessibile. In tale contesto si inserisce il presente lavoro di tesi che ha come scopo la realizzazione di un nuovo poli(estere uretano) multiblocco a base di acido 2,5-furandicarbossilico, caratterizzato da proprietà migliorate rispetto all’omopolimero di partenza (poli(esametilene 2,5-furanoato)), il quale presenti una maggiore velocità di degradazione, combinata con un comportamento meccanico elastomerico, e eccellenti proprietà barriera. Per questo sono state prese in considerazione due diverse unità copolimeriche: una cosiddetta “hard” il poli(esametilene 2,5-furanoato) e l’altra “soft” il poli(trietilene 2,5-furanoato). L’alternanza di queste due porzioni ha permesso di realizzare un copolimero tenace, con un’elevata temperatura di fusione (dovuta all’elevato grado di cristallinità del segmento hard), e con un basso modulo elastico ed un elevato allungamento a rottura (tipici invece del segmento soft). I risultati ottenuti hanno evidenziato come la copolimerizzazione abbia aumentato la flessibilità del materiale, la velocità di degradazione, entrambi grazie al ridotto grado di cristallinità. Infine il copolimero presenta eccellenti proprietà barriera, grazie alla presenza di una fase bidimensionale ordinata (mesofase).

Transtorno do humor: transtorno depressivo maior e bipolar

Este objeto aponta de início dois transtornos, Transtorno Depressivo Maior e Transtorno Bipolar 1, e explica que ambos lidam com perda do senso de controle sobre os humores e afetos associada a uma experiência subjetiva de grande sofrimento. Segue abordando a depressão, inclusive em crianças e idosos, e detalha o TDM, inclui a mania como um dos transtornos do humor e esclarece alguns pontos sobre ela. Termina declarando que o tratamento dos transtornos do humor visa principalmente à segurança do usuário, sobretudo nos riscos de suicídio e que a combinação de farmacoterapia e psicoterapia é vista como a terapêutica mais adequada. Unidade 3 do módulo 9 que compõe o Curso de Especialização em Saúde da Família.

Curso EaD sobre saúde mental na Atenção Primária à Saúde para médicos: transtorno bipolar, abordagem inicial

Este vídeo integra o "Curso EaD sobre saúde mental na Atenção Primária à Saúde para médicos”, desenvolvido pelo TelessaúdeRS/UFRGS. O curso foi elaborado com o objetivo de qualificar médicos que atuam em unidades básicas de saúde do Brasil para o diagnóstico, a abordagem e o acompanhamento de pacientes com transtornos mentais. O vídeo reúne informações básicas sobre abordagem inicial, na Atenção Primária à Saúde, de pacientes com transtorno bipolar.

Curso EaD sobre saúde mental na Atenção Primária à Saúde para médicos: transtorno bipolar, diagnóstico

Este vídeo integra o "Curso EaD sobre saúde mental na Atenção Primária à Saúde para médicos”, desenvolvido pelo TelessaúdeRS/UFRGS. O curso foi elaborado com o objetivo de qualificar médicos que atuam em unidades básicas de saúde do Brasil para o diagnóstico, a abordagem e o acompanhamento de pacientes com transtornos mentais. O vídeo reúne informações básicas sobre diagnóstico, na Atenção Primária à Saúde, de pacientes com transtorno bipolar.

Curso EaD sobre saúde mental na Atenção Primária à Saúde para médicos: transtorno bipolar, tratamento

Este vídeo integra o curso de EaD sobre "saúde mental na Atenção Primária à Saúde para médicos”, desenvolvido pelo TelessaúdeRS/UFRGS. O curso foi elaborado com o objetivo de qualificar médicos que atuam em unidades básicas de saúde do Brasil para o diagnóstico, a abordagem e o acompanhamento de pacientes com transtornos mentais. O vídeo reúne informações básicas sobre tratamento, na Atenção Primária à Saúde, de pacientes com transtorno bipolar.

Efeito da temperatura e do teor de umidade na iniciação e desenvolvimento do rizoma de Kohleria eriantha (Benth.) Hanst. (Gesneriaceae)

Kohleria eriantha (Benth.) Hanst is a plant belonging to the family Gesneriaceae, with an underground organ, which is associated with vegetative reproduction. This organ is a rhizome, whose stem bears buds covered with modified leaves that store up starch. In small sections of this rhizome, containing six buds (1.5 to 2.0cm long), only one bud sprouted. The sprouted bud could be differentiated into two morphological pattern: aerial part or rhizome. Sprouting of the rhizome pattern occurred in sections kept on substrate with low water content (1mL of water), or lacking water, whereas sprouting of the aerial part pattern occurred in sections on substrate with high water content (12mL of water). Temperature at 20ºC also stimulated sprouting of the rhizome pattern, regardless of the water volume in the substrate. Sprouting of the rhizome pattern occurred still in sections on substrate to which polyethylene glycol 6000 (PEG) solution was added at the concentrations of 161.2, 235.2 and 340.0g/L, resulting in potentials of -3, -6 and -12 MPa, respectively. Sections kept on substrate with low water content (1 ml of water) showed a reduction in the dry matter content and high osmotic concentration in comparison with those on substrate with high water content. The results obtained revealed that forming of the rhizome pattern was influenced by water content and temperature. It is suggested that sprouting of the rhizome pattern was induced by the low water potential in the sections, when kept on substrate with low water content. Moreover, it was observed that the rhizome buds of Kohleria eriantha showed a high degree of plasticity.