Studies on the anti-obesity activity of zinc-α2-glycoprotein in the rat

OBJECTIVE: To investigate the anti-obesity effect of the adipokine zinc-a(2)-glycoprotein (ZAG) in rats and the mechanism of this effect. SUBJECTS: Mature male Wistar rats (540 ± 83 g) were administered human recombinant ZAG (50 µg per 100 g body weight given intravenously daily) for 10 days, while control animals received an equal volume of phosphate-buffered saline (PBS). RESULTS: Animals treated with ZAG showed a progressive decrease in body weight, without a decrease in food and water intake, but with a 0.4 °C rise in body temperature. Body composition analysis showed loss of adipose tissue, but an increase in lean body mass. The loss of fat was due to an increase in lipolysis as shown by a 50% elevation of plasma glycerol, accompanied by increased utilization of non-esterified fatty acids, as evidenced by the 55% decrease in plasma levels. Plasma levels of glucose and triglycerides were also reduced by 36-37% and there was increased expression of the glucose transporter 4 in both skeletal muscle and adipose tissue. Expression of the lipolytic enzymes adipose triglyceride lipase and hormone-sensitive lipase in the white adipose tissue (WAT) were increased twofold after ZAG administration. There was almost a twofold increased expression of uncoupling proteins 1 and 3 in brown adipose tissue and WAT, which would contribute to increased substrate utilization. Administration of ZAG increased ZAG expression twofold in the gastrocnemius muscle, BAT and WAT, which was probably necessary for its biological effect. CONCLUSION: These results show that ZAG produces increased lipid mobilization and utilization in the rat.

The effect of care solutions on the bulk and surface properties of soft contact lenses

Purpose: Soft contact lenses for continuous wear require the use of cleaning regimes which utilise hydrogen peroxide systems or multipurpose cleaning solutions (MPS). The compositions of MPS are becoming increasingly complex and often include disinfectants, cleaning agents, preservatives, wetting agents, demulcents, chelating and buffering agents. Recent research on solution–lens interactions has focused on specific ocular parameters such as corneal staining. However the effect of a solution on the lens, particularly silicone hydrogel lenses, itself has received less attention. The purpose of this work was to establish and understand the effects that care solutions have on selected bulk and surface material properties. Methods: Selected bulk and surface properties of each material (etafilcon A, vifilcon A, balafilcon A, senofilcon A, lotrafilcon A and lotrafilcon B, galyfilcon A) were measured after a 24 h soak in a variety of care solutions. Additionally the lenses were soaked for 24 h in hyperosmolar (680 mOsm L-1) and hyposmolar (170 mOsm L-1) PBS. A bulk property parameter the total diameter (TD) was measured using an Optimec contact lens analyser. The surface property related CoF of soaked lenses was measured on a nano-tribometer with conditions of load 30 mN, at a distance of 20 mm and speed 30 mm/min. Results: In terms of bulk properties, change is related to the EWC of the lens, the higher the EWC of the lens the greater the TD changes. Silicone hydrogel lenses have EWCs of <47% and little or no TD changes were observed; lotrafilcon A exhibited no change irrespective of the cleaning solution. Conventional contact lenses have higher EWCs (58% for etafilcon A and 55% for vifilcon A) and the TD was seen to change to a greater extent, for example the etafilcon A material in ReNu MPS had an increase to 14.45± 0.07 mm from the cited 14.2 mm. Other lenses increased or decreased in TD depending on the solution used. The osmolarity of the solution although important is not the only factor governing change in the TD, for example soaking senofilcon A in hyperosmolar PBS (680 mOsm L-1) for 24 h increased the TD of the lens (+0.25 ± 0.07 mm), however when the same lens type was soaked for 24 h in a MPS with a lower osmolarity there was a similar effect. Biotribology measurements demonstrated that some solution–lens combinations can reduce the CoF by 55%, when compared with biotribology with the native packing solution. An increase in the CoF was observed for other solution–lens combinations. Conclusions: There is a dramatic difference in bulk and surface performance of specific lens materials with particular care solutions. Individual components of the care solutions have effects on the bulk and surface properties of contact lenses. The affects are not as great with the silicone hydrogel as compared with conventional hydrogels.

Ascorbate and α-tocopherol differentially modulate reactive oxygen species generation by neutrophils in response to FcγR and TLR agonists

Periodontitis, a ubiquitous chronic inflammatory disease, is associated with reduced antioxidant defences and neutrophil hyperactivity in terms of reactive oxygen species (ROS) generation. Its phenotype is thus characterized by oxidative stress. We have determined the effect of antioxidant micronutrients ascorbate and α-tocopherol on neutrophil ROS generation. Peripheral neutrophils from periodontally-healthy individuals (n = 20) were challenged with phorbol myristate acetate, IgG-opsonised Staphylococcus aureus, Fusobacterium nucleatum or PBS in the presence and absence of micronutrients (50 μM). Total and extracellular ROS were measured by luminol and isoluminol chemiluminescence respectively. Total and extracellular unstimulated, baseline ROS generation was unaffected by α-tocopherol, but inhibited by ascorbate and a combination of both micronutrients. Fcγ-receptor (Fcγ-R)-stimulated total or extracellular ROS generation was not affected by the presence of individual micronutrients. However, the combination significantly reduced extracellular FcγR-stimulated ROS release. Neither micronutrient inhibited TLR-stimulated total ROS, but the combination caused inhibition. Ascorbate and the micronutrient combination, but not α-tocopherol, inhibited extracellular ROS release by TLR-stimulated cells. Such micronutrient effects in vivo could be beneficial in reducing collateral tissue damage in chronic inflammatory diseases, such as periodontitis, while retaining immune-mediated neutrophil function. © The Author(s) 2012 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Precipitation casting of drug-loaded microporous PCL matrices:incorporation of progesterone by co-dissolution

Microporous, poly(ε-caprolactone) (PCL) matrices were loaded with progesterone by precipitation casting using co-solutions of PCL and progesterone in acetone. Progesterone loadings up to 32% w/w were readily achieved by increasing the drug content of the starting PCL solution. The kinetics of steroid release in PBS at 37°C over 10 days could be described effectively by a diffusional release model although the Korsmeyer-Peppas model indicated the involvement of multiple release phenomena. The diffusion rate constant (D) increased from 8 to 24 μg/mg matrix/day0.5 as the drug loading increased from 3.6 to 12.4% w/w. A total cumulative release of 75%-95% indicates the high efficiency of steroid delivery. Increasing the matrix density from 0.22 to 0.39 g/cm3, by increasing the starting PCL solution concentration, was less effective in changing drug release kinetics. Retention of anti-proliferative activity of released steroid was confirmed using cultures of breast cancer epithelial (MCF-7) cells. Progesterone released from PCL matrices into PBS at 37°C over 14 days retarded the growth of MCF-7 cells by a factor of at least 3.5 compared with progesterone-free controls. These findings recommend further investigation of precipitation-cast PCL matrices for delivery of bioactive molecules such as anti-proliferative agents from implanted, inserted or topical devices.

Delivery of the antibiotic gentamicin sulphate from precipitation cast matrices of polycaprolactone

Microporous, poly(ε-caprolactone) (PCL) matrices were loaded with the aminoglycoside antibiotic, gentamicin sulphate (GS) using the precipitation casting technique by suspension of powder in the PCL solution prior to casting. Improvements in drug loading from 1.8% to 6.7% w/w and distribution in the matrices were obtained by pre-cooling the suspension to 4°C. Gradual release of approximately 80% of the GS content occurred over 11 weeks in PBS at 37°C and low amounts of antibiotic were measured up to 20 weeks. The kinetics of release could be described effectively by the Higuchi model with the diffusion rate constant (D) increasing from of 1.7 to 5.1 μg/mg matrix/day0.5 as the drug loading increased from 1.4% to 8.3% w/w. GS-loaded PCL matrices retained anti-bacterial activity after immersion in PBS at 37°C over 14 days as demonstrated by inhibition of growth of S. epidermidis in culture. These findings recommend further investigation of precipitation-cast PCL matrices for delivery of hydrophilic molecules such as anti-bacterial agents from implanted, inserted or topical devices. © 2005 Elsevier B.V. All rights reserved.

Exploring the correlation between lipid packaging in lipoplexes and their transfection efficacy

Whilst there is a large body of evidence looking at the design of cationic liposomes as transfection agents, correlates of formulation to function remain elusive. In this research, we investigate if lipid packaging can give further insights into transfection efficacy. DNA lipoplexes composed of 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE) or 1,2-distearoyl-sn-glycero-3-phosphoethanolamine (DSPE) in combination with 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP) or 1,2-stearoyl-3-trimethylammonium-propane (DSTAP) were prepared by the lipid hydration method. Each of the formulations was prepared by hydration in dH2O or phosphate buffer saline (PBS) to investigate the effect of buffer salts on lipoplex physicochemical characteristics and in vitro transfection. In addition, Langmuir monolayer studies were performed to investigate any possible correlation between lipid packaging and liposome attributes. Using PBS, rather than dH2O, to prepare the lipoplexes increased the size of vesicles in most of formulations and resulted in variation in transfection efficacies. However, one combination of lipids (DSPE:DOTAP) could not form liposomes in PBS, whilst the DSPE:DSTAP combination could not form liposomes in either aqueous media. Monolayer studies demonstrated saturated lipid combinations offered dramatically closer molecular packing compared to the other combinations which could suggest why this lipid combination could not form vesicles. Of the lipoplexes prepared, those formulated with DSTAP showed higher transfection efficacy, however, the effect of buffer on transfection efficiency was formulation dependent. © 2011 by the authors; licensee MDPI, Basel, Switzerland.

Synergistic synthesis of quasi-monocrystal CdS nanoboxes with high-energy facets

Hollow nanostructures with a highly oriented lattice structure and active facets are promising for catalytic applications, while their preparation via traditional approaches contains multiple steps and is time and energy consuming. Here, we demonstrate a new one-step strategy involving two complementary reactions which promote each other; it is capable of producing unique hollow nanoparticles. Specifically, we apply synergic cooperation of cation exchange and chemical etching to attack PbS nanosized cubes (NCs) and produce CdS quasi-monocrystal nanoboxes (QMNBs) which possess the smallest dimensions reported so far, a metastable zinc-blende phase, a large specific surface area, and particularly high-energy {100} facets directly visualized by aberration-corrected scanning transmission electron microscopy. These properties in combination allow the nanoboxes to acquire exceptional photocatalytic activities. As an extension of the approach, we use the same strategy to prepare Co9S8 and Cu7.2S4 single-crystal hollow nanooctahedrons (SCHNOs) successfully. Hence, the synergic reaction synthesis strategy exhibits great potential in engineering unique nanostructures with superior properties.

Microporous polycaprolactone matrices for drug delivery and tissue engineering:the release behaviour of bioactives having extremes of aqueous solubility

Microporous polycaprolactone (PCL) matrices loaded with hydrophobic steroidal drugs or a hydrophilic drug - pilocarpine hydrochloride - were produced by precipitation casting using solutions of PCL in acetone. The efficiency of steroid incorporation in the final matrix (progesterone (56 %) testosterone (46 %) dexamethasone (80 %)) depended on the nature of the drug initially co-dissolved in the PCL solution. Approximately 90 % w/w of the initial load of progesterone, 85 % testosterone and 50 % dexamethasone was released from the matrices in PBS at 37°C over 8 days. Pilocarpine hydrochloride (PH)-loaded PCL matrices, prepared by dispersion of powder in PCL solution, released 70-90 % of the PH content over 12 days in PBS. Application of the Higuchi model revealed that the kinetics of steroid and PH release were consistent with a Fickian diffusion mechanism with corresponding diffusion coefficients of 5.8 × 10-9 (progesterone), 3.9 × 10 -9 (testosterone), 7.1 × 10-10 (dexamethasone) and 22 × 10-8 cm2/s (pilocarpine hydrochloride). The formulation techniques described are expected to be useful for production of implantable, insertable and topical devices for sustained delivery of a range of bioactive molecules of interest in drug delivery and tissue engineering.

Microspheres for liver radiomicrospheres therapy and planning

Liver cancer accounts for nearly 10% of all cancers in the US. Intrahepatic Arterial Radiomicrosphere Therapy (RMT), also known as Selective Internal Radiation Treatment (SIRT), is one of the evolving treatment modalities. Successful patient clinical outcomes require suitable treatment planning followed by delivery of the microspheres for therapy. The production and in vitro evaluation of various polymers (PGCD, CHS and CHSg) microspheres for a RMT and RMT planning are described. Microparticles with a 30±10 µm size distribution were prepared by emulsion method. The in vitro half-life of the particles was determined in PBS buffer and porcine plasma and their potential application (treatment or treatment planning) established. Further, the fast degrading microspheres (≤ 48 hours in vitro half-life) were labeled with 68Ga and/or 99mTc as they are suitable for the imaging component of treatment planning, which is the primary emphasis of this dissertation. Labeling kinetics demonstrated that 68Ga-PGCD, 68Ga-CHSg and 68Ga-NOTA-CHSg can be labeled with more than 95% yield in 15 minutes; 99mTc-PGCD and 99mTc-CHSg can also be labeled with high yield within 15-30 minutes. In vitro stability after four hours was more than 90% in saline and PBS buffer for all of them. Experiments in reconstituted hemoglobin lysate were also performed. Two successful imaging (RMT planning) agents were found: 99mTc-CHSg and 68Ga-NOTA-CHSg. For the 99mTc-PGCD a successful perfusion image was obtained after 10 minutes, however the in vivo degradation was very fast (half-life), releasing the 99mTc from the lungs. Slow degrading CHS microparticles (> 21 days half-life) were modified with p-SCN-b-DOTA and labeled with 90 Y for production of 90Y-DOTA-CHS. Radiochemical purity was evaluated in vitro and in vivo showing more than 90% stability after 72 and 24 hours respectively. All agents were compared to their respective gold standards (99mTc-MAA for 68Ga-NOTA-CHSg and 99m Tc-CHSg; 90Y-SirTEX for 90Y-DOTA-CHS) showing superior in vivo stability. RMT and RMT planning agents (Therapy, PET and SPECT imaging) were designed and successfully evaluated in vitro and in vivo.

Community structure of sulfate reducing bacteria in the sediment of the arctic Smeerenburgfjorden

The community structure of sulfate-reducing bacteria (SRB) of a marine Arctic sediment (Smeerenburgfjorden, Svalbard) was characterized by both fluorescence in situ hybridization (FISH) by using group- and genus-specific 16S rRNA-targeted oligonucleotide probes. Samples stored in PBS-ethanol were diluted and treated by mild sonication. A 10-ml aliquot of a 1:40 dilution was filtered onto a 0.2-mm-pore-size type GTTP polycarbonate filter (Millipore, Eschborn, Germany). Hybridization and microscopic counting of hybridized and 49,69-diamidino-2-phenylindole (DAPI)-stained cells were performed as described previously from Snaidr et al. (1997, http://aem.asm.org/content/63/7/2884.full.pdf). Details of probes and formamide concentrations which were used are listed in futher details.. Means were calculated by using 10 to 20 randomly chosen fields for each filter section, which corresponded to 800 to 1,000 DAPI-stained cells. Counting results were always corrected by subtracting signals observed with probe NON338. The SRB community was dominated by members of the Desulfosarcina-Desulfococcus group. This group accounted for up to 73% of the SRB detected. The predominance was shown to be a common feature for different stations along the coast of Svalbard. In a top-to-bottom approach we aimed to further resolve the composition of this large group of SRB by using probes for cultivated genera. While this approach failed, directed cloning of probe-targeted genes encoding 16S rRNA was successful and resulted in sequences which were all affiliated with the Desulfosarcina-Desulfococcus group. A group of clone sequences (group SVAL1) most closely related to Desulfosarcina variabilis (91.2% sequence similarity) was dominant and was shown to be most abundant in situ, accounting for up to 54.8% of the total SRB detected.

Swellable polymer films containing Au nanoparticles for point-of-care therapeutic drug monitoring using surface-enhanced Raman spectroscopy

Large (10 × 10 cm) sheets of surface-enhanced Raman spectroscopy (SERS) active polymer have been prepared by stabilising metal nanoparticle aggregates within dry hydroxyethylcellulose (HEC) films. In these films the aggregates are protected by the polymer matrix during storage but in use they are released when aqueous analyte droplets cause the films to swell to their gel form. The fact that these "Poly-SERS" films can be prepared in bulk but then cut to size and stored in air before use means that they provide a cost effective and convenient method for routine SERS analysis. Here we have tested both Ag and Au Poly-SERS films for use in point-of-care monitoring of therapeutic drugs, using phenytoin as the test compound. Phenytoin in water could readily be detected using Ag Poly-SERS films but dissolving the compound in phosphate buffered saline (PBS) to mimic body fluid samples caused loss of the drug signal due to competition for metal surface sites from Cl^- ions in the buffer solution. However, with Au Poly-SERS films there was no detectable interference from Cl^- and these materials allowed phenytoin to be detected at 1.8 mg L^-1, even in PBS. The target range of detection of phenytoin in therapeutic drug monitoring is 10-20 mg L^-1. With the Au Poly-SERS films, the absolute signal generated by a given concentration of phenytoin was lower for the films than for the parent colloid but the SERS signals were still high enough to be used for therapeutic monitoring, so the cost in sensitivity for moving from simple aqueous colloids to films is not so large that it outweighs the advantages which the films bring for practical applications, in particular their ease of use and long shelf life.

DISPERSÕES AQUOSAS DE POLIURETANO COMO MATERIAL BASE PARA O DESENVOLVIMENTO DE SISTEMAS DE LIBERTAÇÃO CONTROLADA DE CETOPROFENO

O cetoprofeno (ácido 2-(3-benzoilfenil) propiónico) é um anti-inflamatório não esteroidal (AINE) utilizado no tratamento de uma grande variedade de doenças inflamatórias agudas e crónicas incluindo a artrite reumatoide, osteoartrite e espondilite anquilosante. A sua administração oral prolongada está associada a diversas reações gastrointestinais, tais como irritações e ulcerações. Neste contexto, é importante desenvolver sistemas alternati-vos, nomeadamente sistemas de libertação controlada para administração oral, transdér-mica ou intradérmica. Este trabalho tem como objetivo testar a possibilidade de utilização de dispersões aquosas de poliuretano (PUDs) como material de suporte para a produção de sistemas de liberta-ção controlada de cetoprofeno. Numa primeira etapa, foram sintetizadas PUDs de base poliéster (policaprolactona, PCL) e poliéter (polipropileno-glicol, PPG) utilizando o méto-do de pré-polímero modificado. As dispersões obtidas foram caracterizadas em termos de pH, viscosidade, teor de sólidos e tamanho de partícula. Numa segunda etapa, foi testada a incorporação do cetoprofeno nas PDUs produzidas utilizando duas estratégias para incre-mentar a sua solubilidade em água: (i) utilização de um co-solvente (acetona, DMSO e HYD) e (ii) utilização de um surfactante não iónico (Tween 80). A incorporação foi testada para teores de 5% e 10% (razão fármaco/polímero, m/m). Os filmes produzidos pelo méto-do da evaporação do solvente foram avaliados quanto à sua homogeneidade e caracteriza-dos por FTIR e DSC. Numa terceira fase realizaram-se estudos de libertação em tampão de fosfato salino (PBS) de pH 7.5 tendo como objetivo avaliar a viabilidade de desenvolvimen-to de diferentes tipologias de dispositivos dependendo de um compromisso entre as pro-priedades dos filmes e o comportamento de libertação. Os resultados obtidos podem ajudar na seleção do material de base mais adequado para um determinado fim. Adicionalmente, e mais importante, comprovou-se a viabilidade de utilizar PUDs como material base para o desenvolvimento de sistemas de libertação con-trolada, utilizando como exemplo o cetoprofeno. A avaliação da toxicidade e da atividade anti-inflamatória dos filmes produzidos foi considerada estando em curso neste momento no grupo do Professor Armando Cunha Júnior.

LAPSEN TOIVOTTAVAN KÄYTTÄYTYMISEN EDISTÄMINEN PÄIVÄKOTI- JA ESIOPETUSRYHMÄSSÄ: Lastentarhanopettajien kokemuksia lasten käyttäytymisestä ja käyttäytymisen ohjaamisesta

Tutkimuksen tarkoituksena oli selvittää ja kuvailla, millaista toivottavaa ja ei-toivottua käyttäytymistä lastentarhanopettajat ovat havainneet päiväkoti- ja esiopetusryhmien ruokailu-, leikki- ja ohjatuissa tilanteissa. Lisäksi tutkimuksen tarkoituksena oli selvittää ja kuvailla, miten lastentarhanopettajat näissä tilanteissa pyrkivät edistämään lapsen toivottavaa käyttäytymistä. Tutkimuksen tavoitteena oli löytää toimivia menetelmiä käytännön työhön, tukea lastentarhanopettajien oman toiminnan reflektointia ja kasvatustietoisuutta sekä ylläpitää kasvattajatiimeissä pedagogista keskustelua. Tutkimukseen osallistui yhteensä seitsemän lastentarhanopettajaa erään eteläpohjalaisen kaupungin kahdesta eri päiväkodista. Aineistonkeruumenetelmänä tutkimuksessa käytettiin teemahaastattelua. Haastattelua ohjasi teemarunko, ja haastattelut nauhoitettiin. Puhemuotoinen nauhoitettu aineisto litteroitiin peruslitteroinnin periaatteita noudattaen. Analyysimenetelmänä tutkimuksessa käytettiin teemoittelua, ja sisällönanalyysi oli muodoltaan teoriasidonnaista eli teoriaohjaavaa. Haastatteluun osallistuneiden lastentarhanopettajien havaintojen mukaan ruokailu-, leikki- ja ohjatuissa tilanteissa esiintyy monenlaisia toivottavan ja ei-toivotun käyttäytymisen muotoja. Lastentarhanopettajat tukevat toivottavaa ja ennaltaehkäisevät ei-toivottua käyttäytymistä erilaisilla lapsen käyttäytymiseen, varhaiskasvatusympäristön fyysisiin, sosiaalisiin ja psyykkisiin tekijöihin sekä itseensä kohdistuvilla menetelmillä. Ei-toivottua käyttäytymistä lastentarhanopettajat ohjaavat toivottavaan suuntaan erilaisilla lapsen käyttäytymiseen kohdistuvilla pehmeillä, sovitteluun perustuvilla sekä kovilla ja ankarilla menetelmillä tai itseensä kohdistuvilla menetelmillä. Tämän tutkimuksen myötä varhaiskasvatusta toteuttavia kasvatus- ja opetusalan ammattilaisia kannustetaan pohtimaan kriittisesti, millaista käyttäytymistä he lapselta eri tilanteissa odottavat ja miksi. Lisäksi esimerkiksi PBS- ja ProKoulu-toimintamallien sekä tämän tutkimuksen tulosten pohjalta voitaisiin ryhtyä kehittämään suomalaiseen varhaiskasvatukseen soveltuvaa lapsen toivottavaa käyttäytymistä tukevaa toimintamallia. Yhteisen toimintamallin myötä varhaiskasvattajien ei jatkossa tarvitsisi ohjata lapsen käyttäytymistä kovilla ja ankarilla menetelmillä, sillä toimintamallissa keskityttäisiin toivottavan käyttäytymisen tukemiseen ja ei-toivotun käyttäytymisen ennaltaehkäisyyn tutkimusnäyttöön perustuvilla menetelmillä.

Avaliação da interação entre aflatoxina M1 e B1 com a fração proteica do leite

Dissertação composta por 02 artigos.

Transdermal delivery of cyclosporin A by electrically enhanced permeation techniques

Transdermal drug delivery has recently received increasing attention in the face of growing challenges to deliver peptide and protein drugs. Controlled transdermal delivery is an important route for the delivery of peptides and proteins that can maintain the therapeutic effectiveness of the drug by minimizing enzymatic degradation which is a major concern in other noninvasive routes of delivery such as the oral route. Although the advantages of transdermal delivery are very desirable, the natural obstacle to drug entry imposed by the skin's barrier function makes it one of the most difficult route of administration. Iontophoresis and electroporation have been reported to be useful as permeation enhancing techniques in the transdermal delivery of protein and peptide drugs. The objective of present study is to use the above enhancement techniques to deliver cyclosporin A (CSA) to treat psoriasis. The in vitro experiments were performed using hairless rat skin as the model with Franz diffusion cells for iontophoresis and custom made diffusion cells for electroporation. The donor drug solution of CSA consisted of an aqueous solution of CSA - polymer solid dispersion, coevaporate, and/or a hydroethanolic solution of CSA PBS was used as the receiver solution. ³H labelled CSA and ¹⁴C labelled ethanol were used to facilitate analysis using a liquid scintillation counter. The control experiment consisted of passive diffusion study. Silver/silver chloride electrodes were used in all studies. In the iontophoresis experiments a constant DC current (0.5 mA/cm²) was used. In the electroporation experiments different delivery parameters were studied: (1) applied electrode voltage (Uelectrode), (2) decay time constant (τ), (3) the number of pulses delivered - single or multiple, and { 4) the time of diffusive contact with drug after electroporation ('contact duration'). Compared to the passive diffusion, iontophoresis did not result in a significant increase in the amount of CSA delivered transdermally with both the CSA-polymer donor and hydroethanolic drug solutions. With the use of electroporation there was a significant increase in the transdermal delivery, compared to passive transport. With the CSA-polymer coevaporate donor solution the increase in delivery was only about 6 fold higher whereas with the hydroethanolic solution the increase was about 60 times higher compared to passive diffusion. The 'contact duration• was an important fader and a 4-hour 'contact duration' was found to be the optimum time period required for effective transdermal delivery. Use of single pulse (τ=5.6 ms) electroporation resulted in a significant increase {p<0.05) in the delivery of CSA in skin {CSA.n) and EtOH in receiver (EtOHreceiver). With multiple pulse (τ=10 ms. 25 pulses) the increase in CSAskin was more pronounced with a 60 fold increase than compared to the passive delivery. However there was no significant increase in the other two quantities viz. CSAreceiver, and EtCHreceiver.