Global Rates of Free Hydrogen (H2) Production by Serpentinization and other Abiogenic Processes within Young Ocean Crust

The main conclusion of this dissertation is that global H2 production within young ocean crust (<10 Mya) is higher than currently recognized, in part because current estimates of H2 production accompanying the serpentinization of peridotite may be too low (Chapter 2) and in part because a number of abiogenic H2-producing processes have heretofore gone unquantified (Chapter 3). The importance of free H2 to a range of geochemical processes makes the quantitative understanding of H2 production advanced in this dissertation pertinent to an array of open research questions across the geosciences (e.g. the origin and evolution of life and the oxidation of the Earth’s atmosphere and oceans).

The first component of this dissertation (Chapter 2) examines H2 produced within young ocean crust [e.g. near the mid-ocean ridge (MOR)] by serpentinization. In the presence of water, olivine-rich rocks (peridotites) undergo serpentinization (hydration) at temperatures of up to ~500°C but only produce H2 at temperatures up to ~350°C. A simple analytical model is presented that mechanistically ties the process to seafloor spreading and explicitly accounts for the importance of temperature in H2 formation. The model suggests that H2 production increases with the rate of seafloor spreading and the net thickness of serpentinized peridotite (S-P) in a column of lithosphere. The model is applied globally to the MOR using conservative estimates for the net thickness of lithospheric S-P, our least certain model input. Despite the large uncertainties surrounding the amount of serpentinized peridotite within oceanic crust, conservative model parameters suggest a magnitude of H2 production (~1012 moles H2/y) that is larger than the most widely cited previous estimates (~1011 although previous estimates range from 1010-1012 moles H2/y). Certain model relationships are also consistent with what has been established through field studies, for example that the highest H2 fluxes (moles H2/km2 seafloor) are produced near slower-spreading ridges (<20 mm/y). Other modeled relationships are new and represent testable predictions. Principal among these is that about half of the H2 produced globally is produced off-axis beneath faster-spreading seafloor (>20 mm/y), a region where only one measurement of H2 has been made thus far and is ripe for future investigation.

In the second part of this dissertation (Chapter 3), I construct the first budget for free H2 in young ocean crust that quantifies and compares all currently recognized H2 sources and H2 sinks. First global estimates of budget components are proposed in instances where previous estimate(s) could not be located provided that the literature on that specific budget component was not too sparse to do so. Results suggest that the nine known H2 sources, listed in order of quantitative importance, are: Crystallization (6x1012 moles H2/y or 61% of total H2 production), serpentinization (2x1012 moles H2/y or 21%), magmatic degassing (7x1011 moles H2/y or 7%), lava-seawater interaction (5x1011 moles H2/y or 5%), low-temperature alteration of basalt (5x1011 moles H2/y or 5%), high-temperature alteration of basalt (3x1010 moles H2/y or <1%), catalysis (3x108 moles H2/y or <<1%), radiolysis (2x108 moles H2/y or <<1%), and pyrite formation (3x106 moles H2/y or <<1%). Next we consider two well-known H2 sinks, H2 lost to the ocean and H2 occluded within rock minerals, and our analysis suggests that both are of similar size (both are 6x1011 moles H2/y). Budgeting results suggest a large difference between H2 sources (total production = 1x1013 moles H2/y) and H2 sinks (total losses = 1x1011 moles H2/y). Assuming this large difference represents H2 consumed by microbes (total consumption = 9x1011 moles H2/y), we explore rates of primary production by the chemosynthetic, sub-seafloor biosphere. Although the numbers presented require further examination and future modifications, the analysis suggests that the sub-seafloor H2 budget is similar to the sub-seafloor CH4 budget in the sense that globally significant quantities of both of these reduced gases are produced beneath the seafloor but never escape the seafloor due to microbial consumption.

The third and final component of this dissertation (Chapter 4) explores the self-organization of barchan sand dune fields. In nature, barchan dunes typically exist as members of larger dune fields that display striking, enigmatic structures that cannot be readily explained by examining the dynamics at the scale of single dunes, or by appealing to patterns in external forcing. To explore the possibility that observed structures emerge spontaneously as a collective result of many dunes interacting with each other, we built a numerical model that treats barchans as discrete entities that interact with one another according to simplified rules derived from theoretical and numerical work, and from field observations: Dunes exchange sand through the fluxes that leak from the downwind side of each dune and are captured on their upstream sides; when dunes become sufficiently large, small dunes are born on their downwind sides (“calving”); and when dunes collide directly enough, they merge. Results show that these relatively simple interactions provide potential explanations for a range of field-scale phenomena including isolated patches of dunes and heterogeneous arrangements of similarly sized dunes in denser fields. The results also suggest that (1) dune field characteristics depend on the sand flux fed into the upwind boundary, although (2) moving downwind, the system approaches a common attracting state in which the memory of the upwind conditions vanishes. This work supports the hypothesis that calving exerts a first order control on field-scale phenomena; it prevents individual dunes from growing without bound, as single-dune analyses suggest, and allows the formation of roughly realistic, persistent dune field patterns.

Laminar Free Convection from a Vertically-Oriented Concentrated Photovoltaic Cell with Uniform Surface Heat Flux

This research project uses field measurements to investigate the cooling of a triple-junction, photovoltaic cell under natural convection when subjected to various amounts of insolation. The team built an experimental apparatus consisting of a mirror and Fresnel lens to concentrate light onto a triple-junction photovoltaic cell, mounted vertically on a copper heat sink. Measurements were taken year-round to provide a wide range of ambient conditions. A surface was then generated, in MATLAB, using Sparrow’s model for natural convection on a vertical plate under constant heat flux. This surface can be used to find the expected operating temperature of a cell at any location, given the ambient temperature and insolation. This research is an important contribution to the industry because it utilizes field data that represents how a cell would react under normal operation. It also extends the use of a well-known model from a one-sun environment to a multi-sun one.

NAFTA and uneven development in the North American apparel industry

The various contributions to this book have documented how NAFTA-inspired firm strategies are changing the geography of apparel production in North America. The authors show in myriad ways how companies at different positions along the apparel commodity chain are responding to the new institutional and regulatory environment that NAFTA creates. By making it easier for U.S. companies to take advantage of Mexico as a nearby low-cost site for export-oriented apparel production, NAFTA is deepening the regional division of labor within North America, and this process has consequences for firms and workers in each of the signatory countries. In the introduction to this book we alluded to the obvious implications of shifting investment and trade patterns in the North American apparel industry for employment in the different countries. In this concluding chapter we focus on Mexico in the NAFTA era, specifically the extent to which Mexico's role in the North American economy facilitates or inhibits its economic development. W e begin with a discussion of the contemporary debate about Mexico's development, which turns on the question of how to assess the implications of Mexico's rapid and pro-found process of economic reform. Second, we focus on the textile and apparel industries as sectors that have been significantly affected by changes in regulatory environments at both the global and regional levels. Third, we examine the evidence regarding Mexico's NAFTA-era export dynamism, and in particular we emphasize the importance of interfirm networks, both for making sense of Mexico's meteoric rise among apparel exporters and for evaluating the implications of this dynamism for development. Fourth, we turn to a consideration of the national political-economic environment that shapes developmental outcomes for all Mexicans. Although regional disparities within Mexico are profound, aspects of government policy, such as management of the national currency, and characteristics of the institutional environment, such as industrial relations, have nationwide effects, and critics of NAFTA charge that these factors are contributing to a process of economic and social polarization that is ever more evident (Morales 1999; Dussel Peters 2000). Finally, we suggest that the mixed consequences of Mexico's NAFTA-era growth can be taken as emblematic of the contradictions that the process of globalization poses for economic and social development. The anti-sweatshop campaign in North America is one example of transnational or crossborder movements that are emerging to address the negative consequences of this process. In bringing attention to the problem of sweatshop production in North America, activists are developing strategies that rely on a network logic that is not dissimilar to the approaches reflected in the various chapters of this book. © 2009 by Temple University Press. All rights reserved.

An investigation of assessment policy and practices in terms of broad social and educational purposes

Based upon relevant literature, this study investigated the assessment policy and practices for the BSc (Hons) Computing Science programme at the University of Greenwich (UOG), contextualising these in terms of broad social and educational purposes. It discusses Assessment, and then proceeds to give a critical evaluation of the assessment policy and practices at the UOG. Although this is one case study, because any of the features of the programme are generic to other programmes and institutions, it is of wider value and has further implications. The study was concluded in the summer of 2002. It concludes that overall, the programme's assessment policy and practices are well considered in terms of broad social and educational purposes, although it identifies and outlines several possible improvements, as well as raising some major issues still to be addressed which go beyond assessment practices.

Thermal-mechanical analysis of flexible substrates during lead-free solder reflow

This paper presents modeling results about the performance of flexible substrates when subjected to higher lead-free reflow temperatures. Both adhesiveless and adhesive types of polyimide substrates were studied. Finite element (FE) models of flex substrates were built, two copper tracks located in the centre of the substrate was considered. The thermal induced shear stress in the flex substrate during the lead-free reflow process was studied and the effect of the design changes including the track thickness, flex thickness, and copper width were studied. For both types of flexes, the one of most important variables for minimizing damage to the substrate is the height of the copper tracks. The height of flex and the width of copper track show less impact. Beside of the geometry effects, the increase in reflow peak temperature can also result in a significant increase in the interfacial stress between the copper track and flex. Higher stresses were identified within the adhesive flex due to the big CTE mismatch between the copper and adhesive/dielectric

Effect of reflow profile and thermal cycle ageing on the intermetallic formation and growth in lead-free soldering

The formation and growth of intermetallic compound layer thickness is one of the important issues in search for reliable electronic and electrical connections. Intermetallic compounds (IMCs) are an essential part of solder joints. At low levels, they have a strengthening effect on the joint; but at higher levels, they tend to make solder joints more brittle. If the solder joint is subjected to long-standing exposure of high temperature, this could result in continuous growth of intermetallic compound layer. The brittle intermetallic compound layer formed in this way is very much prone to fracture and cold therefore lead to mechanical and electrical failure of the joint. Therefore, the primary aim of this study is to investigate the growth of intermetallic compound layer thickness subjected to five different reflow profiles. The study also looks at the effect of three different temperature cycles (with maximum cycle temperature of 25 0C, 40 0C and 60 0C) on intermetallic compound formation and their growth behaviour.. Two different Sn-Ag-Cu solder pastes (namely paste P1 and paste P2) which were different in flux medium, were used for the study. The result showed that the growth of intermetallic compound layer thickness was a function of ageing temperature. It was found that the rate of growth of intermetallic compound layer thickness of paste P1 was higher than paste P2 at the same temperature condition. This behaviour could be related to the differences in flux mediums of solder paste samples used.

International perspectives on energy policy and the role of nuclear power

In this book, expert energy economists assess the energy policy of thirty-one countries and the role of nuclear power. For many years the shock of Chernobyl took nuclear power off the agenda in most countries. Intense public relations activities by the industry, increasing evidence of climate change and failures to effectively reduce greenhouse gas emissions, have brought nuclear power issues back to the forefront of policy discussion in the nuclear renaissance countries. But some countries are just not prepared to go in that direction and, indeed, are still divesting themselves of their nuclear legacy, the nuclear phase-out countries. And how are nuclear issues being approached in the industrializing countries? An in-depth country-by-country analysis is presented within this framework. Out of such an analysis emerge thematic discussions on, among others, strategy in energy policy; nuclear plant safety, the impacts of nuclear accidents; the adequacy of nuclear power expertise. [Source: publisher's product description].

Redefining knowledge in an information world – a polemic

This paper looks at knowledge and information as different forms of the same ideas or "memes". Very different, for knowledge is live, and information is dead. Knowledge is personal, difficult to acquire; information is plentiful, a commodity. Dawkins coined the term meme to refer to a "unit of cultural transmission". I distinguish between forms of the meme that are live knowledge – the internal idea, or imago, and the external transient representation of it, the ephemeron – and those which are permanent information (artefact and permaphemeron). It is a mistake to talk of a "content-free" learning experience, as though content were "just information". Content is knowledge. The point of education is not just to regenerate live knowledge from one generation to the next, it is to extend and add to it through knowledge creation. And knowledge creativity does not operate in a knowledge vacuum. You need ideas to breed ideas.

Two steps forward, one step back: developing the curriculum for training teachers for technical and further education England 1945-1956

This paper discusses the development of provision for the training of teachers in English further and technical education from 1945 to 1956. While these years saw little growth in this provision, they were formative in that the institutional and curricular patterns of teacher training for the diverse fields of technical and further education were developed at this time. The work of the three national centres in Bolton, London and Huddersfield, during the period of the Emergency Training Scheme (ETS) is summarised with particular reference to the influence of the Ministry of Education‟s conditions for ETS colleges and courses. With the ending of the ETS in 1951 the three centres were given permanent status as teacher training colleges which in turn brought them into association with their local universities as constituent colleges of their Area Training Organisations. The consequences of this transfer to the universities for the curriculum and assessment of technical teacher training and the 'policy dichotomy' of teacher training for secondary and technical education are examined.

Female frequent internet gamblers: a qualitative study of their gambling, its impact and their views on treatment and policy

Aims: to study the gambling history and stories of participants, motivations, impact and helpseeking. Method: Details were advertised on websites and newspapers. 30 frequent gamblers were interviewed over the telephone for approximately one hour. Verbatim transcriptions were analysed using NVIVO and grounded theory. Results/conclusions: Not all women had gambled before. However, internet accessibility meant prolonged periods were spent gambling to the neglect of other life areas. Some were originally motivated by excitement but others gambled to escape from current difficulties. Depression, anxiety, panic attacks and suicide ideation were common. The women were ambivalent towards their gambling and receiving help.

In-situ non-destructive ultrasonic rheology technique for monitoring different lead-free solder pastes for surface mount applications

This paper investigates the application of a non-destructive ultrasonic technique for characterising the rheological properties of solder paste through the use of through-mode microsecond ultrasonic pulses for evaluation of viscoelastic properties of lead-free solder paste containing different types of flux. Ultrasonic techniques offer a robust and reliable form of non-destructive testing of materials where access to the sample is restricted or when sample handling can interfere with the monitoring or analysis process due to externally incorporated changes to the material’s physical state or accidental contamination during the removal or testing process. Ultrasonic based techniques are increasingly used for quality control and production monitoring functions which requires evaluation of changes in material properties for a wide range of industrial applications such as cement paste quality, plastic/polymer extrusion process, dough and even sugar content in beverage drinks. In addition, ultrasound techniques are of great interest for their capability to take rapid measurements in systems which are optically opaque. The conventional industry approach for characterising the rheological properties of suspensions during processing/packaging stage is mainly through the use of viscometer and some through the use of rheometer. One of the potential limitations of viscometer and rheometer based measurements is that the collection and preparation of the solder paste samples can irreversibly alter the structure and flow behaviour of the sample. Hence the measurement may not represent the actual quality of the whole production batch. Secondly, rheological measurements and the interpretation of rheological data is a very technical and time consuming process, which requires professionally trained R&D personnel. The ultrasound technique being proposed provides simple, yet accurate and easy to use solution for the in-situ rheological characterisation of solder pastes which will benefit the materials suppliers (who formulate and produce solder pastes) and solder paste consumers (especially, contract electronics manufacturers). The results from the work show that the technique can be used by R&D personnel involved in paste formulation and manufacture to monitor the batch-to-batch quality and consistency.

The evaluation of time series: their scientific value and contribution to policy needs. Occasional Publication of the Marine Biological Association 22

In 2000 a Review of Current Marine Observations in relation to present and future needs was undertaken by the Inter-Agency Committee for Marine Science and Technology (IACMST). The Marine Environmental Change Network (MECN) was initiated in 2002 as a direct response to the recommendations of the report. A key part of the current phase of the MECN is to ensure that information from the network is provided to policy makers and other end-users to enable them to produce more accurate assessments of ecosystem state and gain a clearer understanding of factors influencing change in marine ecosystems. The MECN holds workshops on an annual basis, bringing together partners maintaining time-series and long-term datasets as well as end-users interested in outputs from the network. It was decided that the first workshop of the MECN continuation phase should consist of an evaluation of the time series and data sets maintained by partners in the MECN with regard to their ‘fit for purpose’ for answering key science questions and informing policy development. This report is based on the outcomes of the workshop. Section one of the report contains a brief introduction to monitoring, time series and long-term datasets. The various terms are defined and the need for MECN type data to complement compliance monitoring programmes is discussed. Outlines are also given of initiatives such as the United Kingdom Marine Monitoring and Assessment Strategy (UKMMAS) and Oceans 2025. Section two contains detailed information for each of the MECN time series / long-term datasets including information on scientific outputs and current objectives. This information is mainly based on the presentations given at the workshop and therefore follows a format whereby the following headings are addressed: Origin of time series including original objectives; current objectives; policy relevance; products (advice, publications, science and society). Section three consists of comments made by the review panel concerning all the time series and the network. Needs or issues highlighted by the panel with regard to the future of long-term datasets and time-series in the UK are shown along with advice and potential solutions where offered. The recommendations are divided into 4 categories; ‘The MECN and end-user requirements’; ‘Procedures & protocols’; ‘Securing data series’ and ‘Future developments’. Ever since marine environmental protection issues really came to the fore in the 1960s, it has been recognised that there is a requirement for a suitable evidence base on environmental change in order to support policy and management for UK waters. Section four gives a brief summary of the development of marine policy in the UK along with comments on the availability and necessity of long-term marine observations for the implementation of this policy. Policy relating to three main areas is discussed; Marine Conservation (protecting biodiversity and marine ecosystems); Marine Pollution and Fisheries. The conclusion of this section is that there has always been a specific requirement for information on long-term change in marine ecosystems around the UK in order to address concerns over pollution, fishing and general conservation. It is now imperative that this need is addressed in order for the UK to be able to fulfil its policy commitments and manage marine ecosystems in the light of climate change and other factors.

REDUCING DIESEL DEPENDENCE IN NUNAVUT: INTEGRATING RENEWABLE ENERGY TECHNOLOGIES THROUGH POLICY ACTIONS

In the last fifty years, Nunavut has developed a deep dependence on diesel for virtually all of its energy needs, including electricity. This dependence has created a number of economic, environmental and health related challenges in the territory, with an estimated 20% of the territory’s annual budget being spent on energy, thereby limiting the Government of Nunavut’s ability to address other essential infrastructure and societal needs, such as education, nutrition and health care and housing. One solution to address this diesel dependency is the use of renewable energy technologies (RETs), such as wind, solar and hydropower. As such, this thesis explores energy alternatives in Nunavut, and through RETScreen renewable energy simulations, found that solar power and wind power are technically viable options for Nunavut communities and a potentially successful means to offset diesel-generated electricity in Nunavut. However, through this analysis it was also discovered that accurate data or renewable resources are often unavailable for most Nunavut communities. Moreover, through qualitative open-ended interviews, the perspectives of Nunavut residents with regards to developing RETs in Nunavut were explored, and it was found that respondents generally supported the use of renewable energy in their communities, while acknowledging that there still remains a knowledge gap among residents regarding renewable energy, stemming from a lack of communication between the communities, government and the utility company. In addition, the perceived challenges, opportunities and gaps that exist with regards to renewable energy policy and program development were discussed with government policy-makers through further interviews, and it was discovered that often government departments work largely independently of each other rather than collaboratively, creating gaps and oversights in renewable energy policy in Nunavut. Combined, the results of this thesis were used to develop a number of recommended policy actions that could be undertaken by the territorial and federal government to support a shift towards renewable energy in order to develop a sustainable and self-sufficient energy plan in Nunavut. They include: gathering accurate renewable resource data in Nunavut; increasing community consultations on the subject of renewable energy; building strong partnerships with universities, colleges and industry; developing a knowledge sharing network; and finally increasing accessibility to renewable energy programs and policies in Nunavut.

Short reflections on the history of African communication

This article aims to propose a chronological subdivision in the history of African communication. African communication today is one of the most important axes for implementing development strategies, sustaining education, health, and schooling programmes, and so on. However, many of these programmes fail due to a lack of or ineffective communication between international organisations, local elite and lay people. The reasons for this situation must be found in Africa’s history of communication, which has undergone radical transformations in its different phases. Using the functionalist analysis drawn up by Jakobson, this article proposes a new chronological subdivision of Africa’s history of communication, reflecting on the current contradictions in contemporary communication in Africa.

EU Environmental Policy under Pressure: Chemicals Policy Change between Antagonistic Goals?

Until now, chemicals policy was unable to find a method to establish a sound balance between the benefits and risks of chemical substances. Policy learning within the European Union (EU) resulted in the formulation of an alternative approach to future chemicals policy in some quarters. The Commission's proposal for new chemicals legislation - presented as 'paradigmatic' policy change - led to a highly controversial lobbying debate. This paper deals in particular with the influence of structures, policy networks, multi-level governance and the influence of new modes of governance on chemicals policy-making. It argues that future policy will not represent the paradigmatic change announced by the Commission but only one incremental, cost-effective step towards such a reform. The final proposal is criticised as a neo-liberal interpretation of the Lisbon strategy which includes a dangerous shift in environmental policy making.