Influence of irradiant energy on degree of conversion, polymerization rate and shrinkage stress in an experimental resin composite system

Objective. This study evaluated the degree of conversion (DC), maximum rate of cure (R(p)(max)), and polymerization stress (PS) developed by an experimental dental composite subjected to different irradiant energies (3,6,12, 24, or 48J/cm(2)) under constant irradiance (500 mw/cm(2)). Methods. DC and R(p)(max) were monitored for 10 min on the bottom surface of 2-mm thick disks and on 150-mu m thick films (representing the top of the specimen) using ATR-FTIR. PS was monitored for 10 min in 2-mm thick disks bonded to two glass rods (O = 5 mm) attached to a universal testing machine. One-way ANOVA/Tukey tests were used and differences in DC and R(p)(max) between top and bottom surfaces were examined using Student`s t-test. Statistical testing was performed at a pre-set alpha of 0.05. Results. For a given surface, DC showed differences among all groups, except at the top between 24 and 48 J/cm(2). R(p)(max) was similar among all groups at the same surface and statistically higher at the top surface. PS also showed significant differences among all groups. Data for 48 J/cm(2) were not obtained due to specimen failure at the glass/composite interface. Significance. Increases in irradiant exposure led to significant increases in DC and PS, but had no effect on R(p)(max) (c) 2008 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Constructing Cultural Policies in Romania. A possible model for communicating the national value system

The premise of this paper is that a model for communicating the national value system must start from a strategy aimed at the identification, the cultivation and communication of values that give consistency to the value system. The analysis concentrates on the elements of such strategies and on the implications of applying a value communication program on the identity architecture of the community. The paper will also discuss the role of the national value system in the context of the emerging global culture, where the individual has the power to create his/her own hybrid cultural model.

Dpws middleware to support agent-based manufacturing control and simulation

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia Electrotécnica e de Computadores

An Enhanced WLAN Security System With FPGA Implementation for Multimedia Applications

Maintaining a high level of data security with a low impact on system performance is more challenging in wireless multimedia applications. Protocols that are used for wireless local area network (WLAN) security are known to significantly degrade performance. In this paper, we propose an enhanced security system for a WLAN. Our new design aims to decrease the processing delay and increase both the speed and throughput of the system, thereby making it more efficient for multimedia applications. Our design is based on the idea of offloading computationally intensive encryption and authentication services to the end systems’ CPUs. The security operations are performed by the hosts’ central processor (which is usually a powerful processor) before delivering the data to a wireless card (which usually has a low-performance processor). By adopting this design, we show that both the delay and the jitter are significantly reduced. At the access point, we improve the performance of network processing hardware for real-time cryptographic processing by using a specialized processor implemented with field-programmable gate array technology. Furthermore, we use enhanced techniques to implement the Counter (CTR) Mode with Cipher Block Chaining Message Authentication Code Protocol (CCMP) and the CTR protocol. Our experiments show that it requires timing in the range of 20–40 μs to perform data encryption and authentication on different end-host CPUs (e.g., Intel Core i5, i7, and AMD 6-Core) as compared with 10–50 ms when performed using the wireless card. Furthermore, when compared with the standard WiFi protected access II (WPA2), results show that our proposed security system improved the speed to up to 3.7 times.

Criação e atualização de aplicações para área de retalho por MDA

Nos últimos anos tem-se verificado a constante evolução dos mercados em plataformas na Internet como forma de melhoria não só dos serviços prestados, mas também para o aumento de vendas de produtos e respetiva internacionalização dos mesmos. Este aumento da procura por este tipo de softwares, assim como a constante evolução e atualização dos mesmos tem contribuído para que estas aplicações evoluam em termos de funcionalidades e complexidade. Isto contribui cada vez para a dificuldade de formar equipas capazes de manter e desenvolver estes sistemas sem que comprometa em grandes custos para as organizações. Neste sentido surgiram diversas ferramentas que permitem criar soluções pré desenvolvidas de aplicações na Internet denominadas de "E-commerce applications". Estas plataformas, apesar do utilizador não ter obrigatoriamente que deter conhecimentos de programação para proceder à sua instalação, são bastante restritas tanto aos serviços que podem ser usados, e na sua escalabilidade, visto que normalmente correm em servidores específicos e por vezes as configurações necessárias para instalação tornam-se bastante complexas de ser efetuadas. Pretende-se no âmbito desta dissertação de mestrado propor um modelo de uma arquitetura de um sistema baseado em mecanismos MDA para a área de retalho, particularmente em ambientes de e-commerce. Serão inicialmente sistematizados os principais tipos de ecommerce numa perspetiva de evolução histórica. Será igualmente enquadrado o MDA no desenvolvimento de um sistema de e-commerce. Neste sentido, serão equacionadas as diferenças entre o modelo típico de desenvolvimento de software e o desenvolvimento de software orientado pelas metodologias do MDA. No processo de especificação e desenvolvimento do modelo proposto será realizada uma análise de requisitos, assim como, a proposta do modelo da arquitetura de um sistema baseado em mecanismos MDA, tendo como orientação os requisitos e arquitetura definida na fase de análise. Finalmente no sentido de analisar o resultado esperado para um sistema orientado por metodologias definidas por MDA, serão realizado alguns testes no sistema desenvolvido de forma a analisar o seu desempenho e validar a sua adequabilidade no âmbito do processo de desenvolvimento de sistemas e-commerce

Development and implementation of an integrated technical management system

Quality Management, Integrated Technical Management Systems, ITMS, Technical Elements, Environment, Occupational Health and safety, OH&S, Standards, ISO, General Regulations, Integration, Management Functions, Computer Centre, Suc-cess Concepts, Documentation, PCT, QMS, EMS, OH&S-MS, Portioning, Evaluation, Technical Cycle, Technical Compliance, Framework

Ambulatory healthcare information system: a conceptual framework

Despite the tremendous amount of data collected in the field of ambulatory care, political authorities still lack synthetic indicators to provide them with a global view of health services utilization and costs related to various types of diseases. Moreover, public health indicators fail to provide useful information for physicians' accountability purposes. The approach is based on the Swiss context, which is characterized by the greatest frequency of medical visits in Europe, the highest rate of growth for care expenditure, poor public information but a lot of structured data (new fee system introduced in 2004). The proposed conceptual framework is universal and based on descriptors of six entities: general population, people with poor health, patients, services, resources and effects. We show that most conceptual shortcomings can be overcome and that the proposed indicators can be achieved without threatening privacy protection, using modern cryptographic techniques. Twelve indicators are suggested for the surveillance of the ambulatory care system, almost all based on routinely available data: morbidity, accessibility, relevancy, adequacy, productivity, efficacy (from the points of view of the population, people with poor health, and patients), effectiveness, efficiency, health services coverage and financing. The additional costs of this surveillance system should not exceed Euro 2 million per year (Euro 0.3 per capita).

VLSI architecture for an Underwater Robot Vision System

It is well known that image processing requires a huge amount of computation, mainly at low level processing where the algorithms are dealing with a great number of data-pixel. One of the solutions to estimate motions involves detection of the correspondences between two images. For normalised correlation criteria, previous experiments shown that the result is not altered in presence of nonuniform illumination. Usually, hardware for motion estimation has been limited to simple correlation criteria. The main goal of this paper is to propose a VLSI architecture for motion estimation using a matching criteria more complex than Sum of Absolute Differences (SAD) criteria. Today hardware devices provide many facilities for the integration of more and more complex designs as well as the possibility to easily communicate with general purpose processors

Dynamic bandwidth management as part of an integrated network management system based on distributed agents

We present a system for dynamic network resource configuration in environments with bandwidth reservation and path restoration mechanisms. Our focus is on the dynamic bandwidth management results, although the main goal of the system is the integration of the different mechanisms that manage the reserved paths (bandwidth, restoration, and spare capacity planning). The objective is to avoid conflicts between these mechanisms. The system is able to dynamically manage a logical network such as a virtual path network in ATM or a label switch path network in MPLS. This system has been designed to be modular in the sense that in can be activated or deactivated, and it can be applied only in a sub-network. The system design and implementation is based on a multi-agent system (MAS). We also included details of its architecture and implementation

Black Hawk County Criminal Justice Information System, June 30, 2002

Other Audit Reports

Report of Recommendations to the Iowa Department of Transportation on the Review of Selected General and Application Controls over the Human Resource Information System, May 27, 2003 - June 30, 2003

State Agency Audit Report

Black Hawk County Criminal Justice Information System, June 30, 2003

Other Audit Report - 28E Organization

Report of Recommendations to the University of Northern Iowa on a Review of Selected General and Application Controls over the Modern Executive Management Financial Information System, June 7, 2004 through July 29, 2004

State University Audit Report

Report of Recommendations to the State University of Iowa on the Review of Selected General and Application Controls over the University's Human Resources Information System, June 7, 2005-July 29, 2005

Other Audit Reports - Regent Institutions

Black Hawk County Criminal Justice Information System, Independent Auditor's Reports, Financial Statement and Required Supplementary Information, Schedule of Findings, June 30, 2005

Other Audit Reports - 28E Organization