Non-invasive Ventilation of Patients with ARDS: Insights from the LUNG SAFE Study

Background: Non-invasive ventilation (NIV) is increasingly used in patients with Acute Respiratory Distress Syndrome (ARDS). Whether, during NIV, the categorization of ARDS severity based on the PaO2/FiO2 Berlin criteria is useful is unknown. The evidence supporting NIV use in patients with ARDS remains relatively sparse.

Methods: The Large observational study to UNderstand the Global impact of Severe Acute respiratory FailurE (LUNG SAFE) study described the management of patients with ARDS. This sub-study examines the current practice of NIV use in ARDS, the utility of the PaO2/FiO2 ratio in classifying patients receiving NIV and the impact of NIV on outcome.

Results: Of 2,813 patients with ARDS, 436 (15.5%) were managed with NIV on days 1 and 2 following fulfillment of diagnostic criteria. Classification of ARDS severity based on PaO2/FiO2 ratio was associated with an increase in intensity of ventilatory support, NIV failure, and Intensive Care Unit (ICU) mortality. NIV failure occurred in 22.2% of mild, 42.3% of moderate and 47.1% of patients with severe ARDS. Hospital mortality in patients with NIV success and failure was 16.1 % and 45.4%, respectively. NIV use was independently associated with increased ICU (HR 1.446; [1.159-1.805]), but not hospital mortality. In a propensity matched analysis, ICU mortality was higher in NIV than invasively ventilated patients with a PaO2/FiO2 lower than 150 mmHg.

Conclusions: NIV was used in 15% of patients with ARDS, irrespective of severity category. NIV appears to be associated with higher ICU mortality in patients with a PaO2/FiO2 lower than 150 mmHg.

Trial Registration: ClinicalTrials.gov NCT02010073

Generations and intention to leave current job : Belgian nurses in the workplace

This master thesis aims to identify work-related factors making Belgian nurses consider leaving their job voluntary and to compare the work-related factors across different generations. The purpose of this master thesis has a descriptive nature of research. The research approach chosen is a deductive approach and the research design chosen is a quantitative research design. Cluster sampling in combination with simple random sampling was used as sampling technique. 128 nurses were surveyed from April to May 2016. Nurses who reported to leave the organization due to retirement reasons, temporary employment contract or maternity leave were excluded from the study as this study investigates the voluntary turnover intention. A total of 68 nurses were included in the study which indicates an overall response rate of 53 %. Numerous of the findings in this master thesis are consistent with previous studies on turnover intention of different generations in other western-countries than Belgium. The work-related factor workload was most often reported by Belgian nurses with no intention to leave their job. Belgian nurses with an intention to leave their job indicated most often the work-related factor (non-)financial benefits. The generation-specific findings indicated both similarities and differences between the work-related factors selected. It was observed that Baby Boomers with an intention to leave their job selected most often variables related to the work-related factors (non-)financial benefits, supportive organization and workload. The variable lack of recognition appeared among Baby Boomers with an intention and no intention to leave their job. Surprisingly was the often selected variables lack of direct and/clear feedback on performances and unsupportive supervisor among Baby Boomers with professional turnover intention. Further, it was observed that Generation Xers with an intention to leave their job selected most often variables related to the work-related factors supportive organization, communication, (non-)financial benefits, work content and workload. The variables inadequate opportunity for advancement/professional growth and imbalance work-life appeared among Generation Xers with an intention and no intention to leave their job. Generation Yers with an intention to leave their job selected most frequently variables related to the work-related factors (non-)financial benefits, workload and commitment. The variables inadequate salary and opportunities elsewhere appeared among nurses with an intention and no intention to leave their job. Surprisingly was the often selected variable inadequate salary among Generation Yers with professional turnover intention.

Non-invasive diagnosis of pediatric tuberculosis

Thesis (Master's)--University of Washington, 2016-08

Muscle Dysmorphia: Current Insights

Since 1997, there has been increasing research focused on Muscle Dysmorphia, a condition underpinned by people’s beliefs they have insufficient muscularity, in both the Western and non-western medical and scientific communities. Much of this empirical interest has surveyed nonclinical samples, and there is limited understanding of people with the condition beyond knowledge about their characteristics. Much existing knowledge about people with the condition is unsurprising and inherent in the definition of the disorder, such as dissatisfaction with muscularity and adherence to muscle-building activities. Only recently have investigators started to explore questions beyond these limited tautological findings that may give rise to substantial knowledge advances, such as the examination of masculine and feminine norms. There is limited understanding of additional topics such as etiology, prevalence, nosology, prognosis, and treatment. Further, the evidence is largely based on a small number of unstandardized case reports and descriptive studies (involving small samples), largely confined to Western (North American, British, and Australian) males. Although much research has been undertaken since the term Muscle Dysmorphia entered the psychiatric lexicon in 1997, there remains tremendous scope for knowledge advancement. A primary task in the short term is for investigators to examine the extent that the condition exists among well-defined populations to help determine the justification for research funding relative to other public health issues. A greater variety of research questions and designs may contribute to a broader and more robust knowledge base than currently exists. Future work will help clinicians assist a group of people whose quality of life and health is placed at risk by their muscular preoccupation.

Exercise Prescription for Patients with Non-specific Chronic Low Back Pain: a Qualitative Study of Patients' Experiences in Decision Making

Background The culture of current clinical practice calls for collaboration between therapists and patients, sharing power and responsibility. This paper reports on the findings of a qualitative study of exercise prescription for patients with NSCLBP, taking into account issues such as decision making and how this accords with patient preferences and experiences. Objective To understand the treatment decision making experiences, information and decision support needs of patients with NSCLBP who have been offered exercise as part of their management plan. Design A qualitative study using a philosophical hermeneutic approach. Methods Semi-structured interviews with eight patients (including use of brief patient vignettes) was undertaken to explore their personal experiences of receiving exercise as part of the management of their NSCLBP, and their involvement in decisions regarding their care. Findings The findings provide a detailed insight into patients’ perceptions and experiences of receiving exercise-based management strategies. Four themes were formed from the texts: (1) patients’ expectations and patients’ needs are not synonymous, (2) information is necessary but often not sufficient, (3) not all decisions need to be shared, and (4) wanting to be treated as an individual. Conclusions Shared decision making did not appear to happen in physiotherapy clinical practice, but equally may not be what every patient wants. The overall feeling of the patients was that the therapist was dominant in structuring the interactions, leaving the patients feeling disempowered to question and contribute to the decision making.

Integrated Reporting in OMXS30 companies - An Analysis of Human Capital Disclosures

Background and Problem: Sustainability reporting is a growing interest in today’s organizations and it is essential to report on non-financial matters. Many of the existing frameworks have been criticized for being used only of symbolical reasons which is why the concept of integrated reporting and the <IR> framework have been developed. One of the cornerstones in the <IR> framework is human capital which is one of the most valuable assets in an organization. Traditionally, employee costs have only been treated as an expense and there have been limited disclosures in corporate reports. In the current business world it is instead seen as an investment in human resources. Since previous studies have shown an increase of human capital disclosures when corporate reports become integrated, integrated reporting might be the solution to this problem. Purpose: The purpose of this study is to examine if there are differences in human capital disclosures between integrated reports and separate annual and sustainability reports in companies listed at OMXS30. Delimitations: This study’s empirical examination is limited to include the companies listed at Stockholm OMX30. Only corporate reports issued for the year 2014 are treated. Methodology: For this study a self-constructed disclosure scoreboard with human capital- related items has been used to collect data from the companies’ corporate reports. Also additional information beyond the pre-determined items has been collected to extend the data collection. Empirical Results and Conclusion: The results show that human capital seems to be a subject that is relatively little reported about. The integrated reporting companies do not disclose more information compared to non-integrated reporting companies. However, the results show that integrated reporting companies seem to have a more future-oriented focus and that the disclosures are more dispersed throughout the reports. It can be concluded that company sector and size do not affect the amount or type of information. 

IntelliChair: a non-intrusive sitting posture and sitting activity recognition system

Current Ambient Intelligence and Intelligent Environment research focuses on the interpretation of a subject’s behaviour at the activity level by logging the Activity of Daily Living (ADL) such as eating, cooking, etc. In general, the sensors employed (e.g. PIR sensors, contact sensors) provide low resolution information. Meanwhile, the expansion of ubiquitous computing allows researchers to gather additional information from different types of sensor which is possible to improve activity analysis. Based on the previous research about sitting posture detection, this research attempts to further analyses human sitting activity. The aim of this research is to use non-intrusive low cost pressure sensor embedded chair system to recognize a subject’s activity by using their detected postures. There are three steps for this research, the first step is to find a hardware solution for low cost sitting posture detection, second step is to find a suitable strategy of sitting posture detection and the last step is to correlate the time-ordered sitting posture sequences with sitting activity. The author initiated a prototype type of sensing system called IntelliChair for sitting posture detection. Two experiments are proceeded in order to determine the hardware architecture of IntelliChair system. The prototype looks at the sensor selection and integration of various sensor and indicates the best for a low cost, non-intrusive system. Subsequently, this research implements signal process theory to explore the frequency feature of sitting posture, for the purpose of determining a suitable sampling rate for IntelliChair system. For second and third step, ten subjects are recruited for the sitting posture data and sitting activity data collection. The former dataset is collected byasking subjects to perform certain pre-defined sitting postures on IntelliChair and it is used for posture recognition experiment. The latter dataset is collected by asking the subjects to perform their normal sitting activity routine on IntelliChair for four hours, and the dataset is used for activity modelling and recognition experiment. For the posture recognition experiment, two Support Vector Machine (SVM) based classifiers are trained (one for spine postures and the other one for leg postures), and their performance evaluated. Hidden Markov Model is utilized for sitting activity modelling and recognition in order to establish the selected sitting activities from sitting posture sequences.2. After experimenting with possible sensors, Force Sensing Resistor (FSR) is selected as the pressure sensing unit for IntelliChair. Eight FSRs are mounted on the seat and back of a chair to gather haptic (i.e., touch-based) posture information. Furthermore, the research explores the possibility of using alternative non-intrusive sensing technology (i.e. vision based Kinect Sensor from Microsoft) and find out the Kinect sensor is not reliable for sitting posture detection due to the joint drifting problem. A suitable sampling rate for IntelliChair is determined according to the experiment result which is 6 Hz. The posture classification performance shows that the SVM based classifier is robust to “familiar” subject data (accuracy is 99.8% with spine postures and 99.9% with leg postures). When dealing with “unfamiliar” subject data, the accuracy is 80.7% for spine posture classification and 42.3% for leg posture classification. The result of activity recognition achieves 41.27% accuracy among four selected activities (i.e. relax, play game, working with PC and watching video). The result of this thesis shows that different individual body characteristics and sitting habits influence both sitting posture and sitting activity recognition. In this case, it suggests that IntelliChair is suitable for individual usage but a training stage is required.

Ethanol production from brown seaweed using non-conventional yeasts

The use of macroalgae (seaweed) as a potential source of biofuels has attracted considerable worldwide interest. Since brown algae, especially the giant kelp, grow very rapidly and contain considerable amounts of polysaccharides, coupled with low lignin content, they represent attractive candidates for bioconversion to ethanol through yeast fermentation processes. In the current study, powdered dried seaweeds (Ascophylum nodosum and Laminaria digitata) were pre-treated with dilute sulphuric acid and hydrolysed with commercially available enzymes to liberate fermentable sugars. Higher sugar concentrations were obtained from L. digitata compared with A. nodosum with glucose and rhamnose being the predominant sugars, respectively, liberated from these seaweeds. Fermentation of the resultant seaweed sugars was performed using two non-conventional yeast strains: Scheffersomyces (Pichia) stipitis and Kluyveromyces marxianus based on their abilities to utilise a wide range of sugars. Although the yields of ethanol were quite low (at around 6 g/L), macroalgal ethanol production was slightly higher using K. marxianus compared with S. stipitis. The results obtained demonstrate the feasibility of obtaining ethanol from brown algae using relatively straightforward bioprocess technology, together with non-conventional yeasts. Conversion efficiency of these non-conventional yeasts could be maximised by operating the fermentation process based on the physiological requirements of the yeasts.

Health assets and active lifestyles during preadolescence and adolescence: highlights from the HBSC/WHO health survey and implications for health promotion

The present chapter discusses the assets model as a theoretical approach to the study of health behavior and health promotion. The model emphasizes people’s talents, competences, and resources. In this chapter, a health asset is defined as any factor or resource that maximizes the opportunities for individuals, local communities, and populations to attain and maintain health and well-being. This perspective expands and complements the current medical model as it focuses on the development of a sense of empowerment in community members to prevent and manage their own health. Therefore, in this chapter we address the concepts of salutogenesis, social support, resilience, coping, self-regulation, social capital, and personal and social competence, which are central to the development of individuals’ potential to manage and savor their own health, creating the conditions for self-fulfillment. Additionally, we demonstrate how the assets model guides the study of children’s and adolescents’ health in the Portuguese Health Behaviour in School-aged Children study (www.hbsc.org), concentrating on areas such as active lifestyles and quality-of-life perception. Finally, we present a roadmap for action that emphasizes the need to identify the factors that make children and adolescents happy and healthy individuals, while minimizing risks and problems they naturally encounter throughout their development. We also argue for the need to involve young people in discussions concerning their health and health promotion practices, focusing on the development of talents, capabilities, and positive expectations for the future.

Imaging of activated complement using ultrasmall superparamagnetic iron oxide particles (USPIO) - conjugated vectors: an in vivo in utero non-invasive method to predict placental insufficiency and abnormal fetal brain development.

In the current study, we have developed a magnetic resonance imaging-based method for non-invasive detection of complement activation in placenta and foetal brain in vivo in utero. Using this method, we found that anti-complement C3-targeted ultrasmall superparamagnetic iron oxide (USPIO) nanoparticles bind within the inflamed placenta and foetal brain cortical tissue, causing a shortening of the T2* relaxation time. We used two mouse models of pregnancy complications: a mouse model of obstetrics antiphospholipid syndrome (APS) and a mouse model of preterm birth (PTB). We found that detection of C3 deposition in the placenta in the APS model was associated with placental insufficiency characterised by increased oxidative stress, decreased vascular endothelial growth factor and placental growth factor levels and intrauterine growth restriction. We also found that foetal brain C3 deposition was associated with cortical axonal cytoarchitecture disruption and increased neurodegeneration in the mouse model of APS and in the PTB model. In the APS model, foetuses that showed increased C3 in their brains additionally expressed anxiety-related behaviour after birth. Importantly, USPIO did not affect pregnancy outcomes and liver function in the mother and the offspring, suggesting that this method may be useful for detecting complement activation in vivo in utero and predicting placental insufficiency and abnormal foetal neurodevelopment that leads to neuropsychiatric disorders.

Renewable energy scenarios for South Karelia – non-industrial energy demands

Tässä diplomityössä tarkastellaan täysin uusiutuvaa energiajärjestelmää Etelä-Karjalan maakunnan alueella, mikä onkin jo tällä hetkellä Suomen uusiutuvin maakunta. Diplomityössä tarkastellaan julkisen sektorin, liikenteen ja rakennusten energian kulutusta mutta teollisuuden energiankäyttö jätetään tarkastelun ulkopuolelle. Työssä tutustutaan tämän hetken Etelä-Karjalan energiajärjestelmään ja sen perusteella tehdään referenssi-skenaario. Tulevaisuuden skenaariot tehdään vuosille 2030 ja 2050. Tulevaisuuden skenaarioissa muutos keskittyy järjestelmän sähköistymiseen ja uusiutuvien tuotantomuotojen integroimiseen järjestelmään. Sähköistyminen kasvattaa sähkönkulutusta, joka pyritään kattamaan uusiutuvilla tuotantomuodoilla, lähinnä tuuli- ja aurinkovoimalla. Liikennesektori rajataan kumipyöräliikenteeseen ja sen muutos tulee olemaan haastavin ja aikaa vievin. Muutokseen pyritään liikennepolttoaineiden tuotannolla maakunnassa sekä sähköautoilulla. Uusiutuva energiajärjestelmä tarvitsee tuotannon ja kysynnän joustoa sekä älyä järjestelmältä. Työssä tarkastellaan myös järjestelmän kustannuksia sekä työllisyysvaikutuksia.

In situ characterization of sediment oxygen demand across the spectrum of non-resuspension to full resuspension with varying bed shear stress

Sediment oxygen demand (SOD) can be a significant oxygen sink in various types of water bodies, particularly slow-moving waters with substantial organic sediment accumulation. In most settings where SOD is a concern, the prevailing hydraulic conditions are such that the impact of sediment resuspension on SOD is not considered. However, in the case of Bubbly Creek in Chicago, Illinois, the prevailing slack water conditions are interrupted by infrequent intervals of very high flow rates associated with pumped combined sewer overflow (CSO) during intense hydrologic events. These events can cause resuspension of the highly organic, nutrient-rich bottom sediments, resulting in precipitous drawdown of dissolved oxygen (DO) in the water column. While many past studies have addressed the dependence of SOD on near-bed velocity and bed shear stress prior to the point of sediment resuspension, there has been limited research that has attempted to characterize the complex and dynamic phenomenon of resuspended-sediment oxygen demand. To address this issue, a new in situ experimental apparatus referred to as the U of I Hydrodynamic SOD Sampler was designed to achieve a broad range of velocities and associated bed shear stresses. This allowed SOD to be analyzed across the spectrum of no sediment resuspension associated with low velocity/ bed shear stress through full sediment resuspension associated with high velocity / bed shear stress. The current study split SOD into two separate components: (1) SODNR is the sediment oxygen demand associated with non-resuspension conditions and is a surface sink calculated using traditional methods to yield a value with units (g/m2/day); and (2) SODR is the oxygen demand associated with resuspension conditions, which is a volumetric sink most accurately characterized using non-traditional methods and units that reflect suspension in the water column (mg/L/day). In the case of resuspension, the suspended sediment concentration was analyzed as a function of bed shear stress, and a formulation was developed to characterize SODR as a function of suspended sediment concentration in a form similar to first-order biochemical oxygen demand (BOD) kinetics with Monod DO term. The results obtained are intended to be implemented into a numerical model containing hydrodynamic, sediment transport, and water quality components to yield oxygen demand varying in both space and time for specific flow events. Such implementation will allow evaluation of proposed Bubbly Creek water quality improvement alternatives which take into account the impact of SOD under various flow conditions. Although the findings were based on experiments specific to the conditions in Bubbly Creek, the techniques and formulations developed in this study should be applicable to similar sites.

Garbage collection optimization for non uniform memory access architectures

Cache-coherent non uniform memory access (ccNUMA) architecture is a standard design pattern for contemporary multicore processors, and future generations of architectures are likely to be NUMA. NUMA architectures create new challenges for managed runtime systems. Memory-intensive applications use the system’s distributed memory banks to allocate data, and the automatic memory manager collects garbage left in these memory banks. The garbage collector may need to access remote memory banks, which entails access latency overhead and potential bandwidth saturation for the interconnection between memory banks. This dissertation makes five significant contributions to garbage collection on NUMA systems, with a case study implementation using the Hotspot Java Virtual Machine. It empirically studies data locality for a Stop-The-World garbage collector when tracing connected objects in NUMA heaps. First, it identifies a locality richness which exists naturally in connected objects that contain a root object and its reachable set— ‘rooted sub-graphs’. Second, this dissertation leverages the locality characteristic of rooted sub-graphs to develop a new NUMA-aware garbage collection mechanism. A garbage collector thread processes a local root and its reachable set, which is likely to have a large number of objects in the same NUMA node. Third, a garbage collector thread steals references from sibling threads that run on the same NUMA node to improve data locality. This research evaluates the new NUMA-aware garbage collector using seven benchmarks of an established real-world DaCapo benchmark suite. In addition, evaluation involves a widely used SPECjbb benchmark and Neo4J graph database Java benchmark, as well as an artificial benchmark. The results of the NUMA-aware garbage collector on a multi-hop NUMA architecture show an average of 15% performance improvement. Furthermore, this performance gain is shown to be as a result of an improved NUMA memory access in a ccNUMA system. Fourth, the existing Hotspot JVM adaptive policy for configuring the number of garbage collection threads is shown to be suboptimal for current NUMA machines. The policy uses outdated assumptions and it generates a constant thread count. In fact, the Hotspot JVM still uses this policy in the production version. This research shows that the optimal number of garbage collection threads is application-specific and configuring the optimal number of garbage collection threads yields better collection throughput than the default policy. Fifth, this dissertation designs and implements a runtime technique, which involves heuristics from dynamic collection behavior to calculate an optimal number of garbage collector threads for each collection cycle. The results show an average of 21% improvements to the garbage collection performance for DaCapo benchmarks.

A III-V channel field effect transistor for non-classical CMOS: process optimisation for improved gate stack function

This thesis describes a collection of studies into the electrical response of a III-V MOS stack comprising metal/GaGdO/GaAs layers as a function of fabrication process variables and the findings of those studies. As a result of this work, areas of improvement in the gate process module of a III-V heterostructure MOSFET were identified. Compared to traditional bulk silicon MOSFET design, one featuring a III-V channel heterostructure with a high-dielectric-constant oxide as the gate insulator provides numerous benefits, for example: the insulator can be made thicker for the same capacitance, the operating voltage can be made lower for the same current output, and improved output characteristics can be achieved without reducing the channel length further. It is known that transistors composed of III-V materials are most susceptible to damage induced by radiation and plasma processing. These devices utilise sub-10 nm gate dielectric films, which are prone to contamination, degradation and damage. Therefore, throughout the course of this work, process damage and contamination issues, as well as various techniques to mitigate or prevent those have been investigated through comparative studies of III-V MOS capacitors and transistors comprising various forms of metal gates, various thicknesses of GaGdO dielectric, and a number of GaAs-based semiconductor layer structures. Transistors which were fabricated before this work commenced, showed problems with threshold voltage control. Specifically, MOSFETs designed for normally-off (VTH > 0) operation exhibited below-zero threshold voltages. With the results obtained during this work, it was possible to gain an understanding of why the transistor threshold voltage shifts as the gate length decreases and of what pulls the threshold voltage downwards preventing normally-off device operation. Two main culprits for the negative VTH shift were found. The first was radiation damage induced by the gate metal deposition process, which can be prevented by slowing down the deposition rate. The second was the layer of gold added on top of platinum in the gate metal stack which reduces the effective work function of the whole gate due to its electronegativity properties. Since the device was designed for a platinum-only gate, this could explain the below zero VTH. This could be prevented either by using a platinum-only gate, or by matching the layer structure design and the actual gate metal used for the future devices. Post-metallisation thermal anneal was shown to mitigate both these effects. However, if post-metallisation annealing is used, care should be taken to ensure it is performed before the ohmic contacts are formed as the thermal treatment was shown to degrade the source/drain contacts. In addition, the programme of studies this thesis describes, also found that if the gate contact is deposited before the source/drain contacts, it causes a shift in threshold voltage towards negative values as the gate length decreases, because the ohmic contact anneal process affects the properties of the underlying material differently depending on whether it is covered with the gate metal or not. In terms of surface contamination; this work found that it causes device-to-device parameter variation, and a plasma clean is therefore essential. This work also demonstrated that the parasitic capacitances in the system, namely the contact periphery dependent gate-ohmic capacitance, plays a significant role in the total gate capacitance. This is true to such an extent that reducing the distance between the gate and the source/drain ohmic contacts in the device would help with shifting the threshold voltages closely towards the designed values. The findings made available by the collection of experiments performed for this work have two major applications. Firstly, these findings provide useful data in the study of the possible phenomena taking place inside the metal/GaGdO/GaAs layers and interfaces as the result of chemical processes applied to it. In addition, these findings allow recommendations as to how to best approach fabrication of devices utilising these layers.

Bioactivity and chromatographic analysis of nutrients and non-nutrients of two Leccinum species

Nowadays the rising cost of health care and pharmaceutical products, the increase in life expectancy as well as the demand for an improved quality of life, has led to an increased concern about food intake and an emergence of new concepts of nutrition [1]. Mushrooms have been pointed out as an excellent option to include in a healthy diet, due to their nutritional value [2] associated with their bioactive properties [3]. The current study presents the chemical profile of two edible species, Leccinum molle (Ban) Ban and Leccinum vulpinum Watling, harvested in the outskirts of Bragan9a (Northeastern Portugal), regarding their content in nutrients and nonnutrients. Individual profiles of sugars and fatty acids were obtained by HPLC-RI and GC-FID, respectively. Tocopherols were analysed by HPLC-fluorescence, and the non-nutrients (i.e., phenolic and other organic acids) by HPLC-PDA. The antioxidant activity of the methanolic extracts obtained from both species was assessed with different assays (e.g. reducing power, radical scavenging activity and lipid peroxidation inhibition) and their hepatotoxicity was evaluated in primary cell cultures obtained from porcine liver, PLP2. Generally, both Leccinum species revealed similar nutrient profiles, with low fat levels, fructose, mannitol and trehalose as the foremost free sugars, and higher percentages of mono- and polyunsaturated fatty acids in comparison with saturated fatty acids. The presence of bioactive compounds was also detected, namely phenolic (e.g., gallic, protocatechuic and p-hydroxybenzoic acids) and organic acids (e.g., citric and fumaric acids). Both species presented antioxidant properties, being L. vulpinum the species which showed the most promising results (higher contents of total phenolic acids and lower ECso values in all the performed assays). Neither of the extracts presented toxicity against the liver primary cells PLP2, up to maximal concentration tested (Giso > 400 μg/ml).