On the feasibility of time-lapse superconducting gravimetry for reservoir monitoring

The feasibility of monitoring fluid flow subsurface processes that result in density changes, using the iGrav superconducting gravimeter, is investigated. Practical targets include steam-assisted gravity drainage (SAGD) bitumen depletion and water pumping from aquifers, for which there is currently a void in low-impact, inexpensive monitoring techniques. This study demonstrates that the iGrav has the potential to be applied to multi-scale and diverse reservoirs. Gravity and gravity gradient signals are forward modeled for a real SAGD reservoir at two time steps, and for surface-fed and groundwater-fed aquifer pumping models, to estimate signal strength and directional dependency of water flow. Time-lapse gravimetry on small-scale reservoirs exhibits two obstacles, namely, a µgal sensitivity requirement and high noise levels in the vicinity of the reservoir. In this study, both limitations are overcome by proposing (i) a portable superconducting gravimeter, and (ii) a pair of instruments under various baseline geometries. This results in improved spatial resolution for locating depletion zones, as well as the cancellation of noise common in both instruments. Results indicate that a pair of iGrav superconducting gravimeters meet the sensitivity requirements and the spatial focusing desired to monitor SAGD bitumen migration at the reservoir scales. For SAGD reservoirs, the well pair separation, reservoir depth, and survey sampling determine the resolvability of individual well pair depletion patterns during the steam chamber rising phase, and general reservoir depletion patterns during the steam chamber spreading phase. Results show that monitoring water table elevation changes due to pumping and tracking whether groundwater or surface water is being extracted are feasible.

The Pico de Navas slump (Burgos, Spain): a large rocky landslide caused by underlying clayey sand fluidification

The Pico de Navas landslide was a large-magnitude rotational movement, affecting 50x106m3 of hard to soft rocks. The objectives of this study were: (1) to characterize the landslide in terms of geology, geomorphological features and geotechnical parameters; and (2) to obtain an adequate geomechanical model to comprehensively explain its rupture, considering topographic, hydro-geological and geomechanical conditions. The rupture surface crossed, from top to bottom: (a) more than 200 m of limestone and clay units of the Upper Cretaceous, affected by faults; and (b) the Albian unit of Utrillas facies composed of silty sand with clay (Kaolinite) of the Lower Cretaceous. This sand played an important role in the basal failure of the slide due to the influence of fine particles (silt and clay), which comprised on average more than 70% of the sand, and the high content presence of kaolinite (>40%) in some beds. Its geotechnical parameters are: unit weight (δ) = 19-23 KN/m3; friction angle (φ) = 13º-38º and cohesion (c) = 10-48 KN/m2. Its microstructure consists of accumulations of kaolinite crystals stuck to terrigenous grains, making clayey peds. We hypothesize that the presence of these aggregates was the internal cause of fluidification of this layer once wet. Besides the faulted structure of the massif, other conditioning factors of the movement were: the large load of the upper limestone layers; high water table levels; high water pore pressure; and the loss of strength due to wet conditions. The 3D simulation of the stability conditions concurs with our hypothesis. The landslide occurred in the Recent or Middle Holocene, certainly before at least 500 BC and possibly during a wet climate period. Today, it appears to be inactive. This study helps to understand the frequent slope instabilities all along the Iberian Range when facies Utrillas is present.

Application of computer-aided tomography techniques to visualize kelp holdfast structure reveals the importance of habitat complexity for supporting marine biodiversity

Ecosystem engineers that increase habitat complexity are keystone species in marine systems, increasing shelter and niche availability, and therefore biodiversity. For example, kelp holdfasts form intricate structures and host the largest number of organisms in kelp ecosystems. However, methods that quantify 3D habitat complexity have only seldom been used in marine habitats, and never in kelp holdfast communities. This study investigated the role of kelp holdfasts (Laminaria hyperborea) in supporting benthic faunal biodiversity. Computer-aided tomography (CT-) scanning was used to quantify the three-dimensional geometrical complexity of holdfasts, including volume, surface area and surface fractal dimension (FD). Additionally, the number of haptera, number of haptera per unit of volume, and age of kelps were estimated. These measurements were compared to faunal biodiversity and community structure, using partial least-squares regression and multivariate ordination. Holdfast volume explained most of the variance observed in biodiversity indices, however all other complexity measures also strongly contributed to the variance observed. Multivariate ordinations further revealed that surface area and haptera per unit of volume accounted for the patterns observed in faunal community structure. Using 3D image analysis, this study makes a strong contribution to elucidate quantitative mechanisms underlying the observed relationship between biodiversity and habitat complexity. Furthermore, the potential of CT-scanning as an ecological tool is demonstrated, and a methodology for its use in future similar studies is established. Such spatially resolved imager analysis could help identify structurally complex areas as biodiversity hotspots, and may support the prioritization of areas for conservation.

Application of computer-aided tomography techniques to visualize kelp holdfast structure reveals the importance of habitat complexity for supporting marine biodiversity

Ecosystem engineers that increase habitat complexity are keystone species in marine systems, increasing shelter and niche availability, and therefore biodiversity. For example, kelp holdfasts form intricate structures and host the largest number of organisms in kelp ecosystems. However, methods that quantify 3D habitat complexity have only seldom been used in marine habitats, and never in kelp holdfast communities. This study investigated the role of kelp holdfasts (Laminaria hyperborea) in supporting benthic faunal biodiversity. Computer-aided tomography (CT-) scanning was used to quantify the three-dimensional geometrical complexity of holdfasts, including volume, surface area and surface fractal dimension (FD). Additionally, the number of haptera, number of haptera per unit of volume, and age of kelps were estimated. These measurements were compared to faunal biodiversity and community structure, using partial least-squares regression and multivariate ordination. Holdfast volume explained most of the variance observed in biodiversity indices, however all other complexity measures also strongly contributed to the variance observed. Multivariate ordinations further revealed that surface area and haptera per unit of volume accounted for the patterns observed in faunal community structure. Using 3D image analysis, this study makes a strong contribution to elucidate quantitative mechanisms underlying the observed relationship between biodiversity and habitat complexity. Furthermore, the potential of CT-scanning as an ecological tool is demonstrated, and a methodology for its use in future similar studies is established. Such spatially resolved imager analysis could help identify structurally complex areas as biodiversity hotspots, and may support the prioritization of areas for conservation.

Overview on bio-based building material made with plant aggregate

Global warming, energy savings, and life cycle analysis issues are factors that have contributed to the rapid expansion of plant-based materials for buildings, which can be qualified as environmental-friendly, sustainable and efficient multifunctional materials. This review presents an overview on the several possibilities developed worldwide about the use of plant aggregate to design bio-based building materials. The use of crushed vegetal aggregates such as hemp (shiv), flax, coconut shells and other plants associated to mineral binder represents the most popular solution adopted in the beginning of this revolution in building materials. Vegetal aggregates are generally highly porous with a low apparent density and a complex architecture marked by a multi-scale porosity. These geometrical characteristics result in a high capacity to absorb sounds and have hygro-thermal transfer ability. This is one of the essential characteristics which differ of vegetal concrete compared to the tradition mineral-based concretes. In addition, the high flexibility of the aggregates leads to a non-fragile elasto-plastic behavior and a high deformability under stress, lack of fracturing and marked ductility with absorbance of the strains ever after having reached the maximum mechanical strength. Due to the sensitivity to moisture, the assessment of the durability of vegetal concrete constitutes one of the next scientific challenging of bio-based building materials.

National climate policies across Europe and their impacts on cities strategies

Globally, efforts are underway to reduce anthropogenic greenhouse gas emissions and to adapt to climate change impacts at the local level. However, there is a poor understanding of the relationship between city strategies on climate change mitigation and adaptation and the relevant policies at national and European level. This paper describes a comparative study and evaluation of cross-national policy. It reports the findings of studying the climate change strategies or plans from 200 European cities from Austria, Belgium, Estonia, Finland, France, Germany, Ireland, Italy, Netherlands, Spain and the United Kingdom. The study highlights the shared responsibility of global, European, national, regional and city policies. An interpretation and illustration of the influences from international and national networks and policy makers in stimulating the development of local strategies and actions is proposed. It was found that there is no archetypical way of planning for climate change, and multiple interests and motivations are inevitable. Our research warrants the need for a multi-scale approach to climate policy in the future, mainly ensuring sufficient capacity and resource to enable local authorities to plan and respond to their specific climate change agenda for maximising the management potentials for translating environmental challenges into opportunities.

The microphysics of collisionless shock waves

Collisionless shocks, that is shocks mediated by electromagnetic processes, are customary in space physics and in astrophysics. They are to be found in a great variety of objects and environments: magnetospheric and heliospheric shocks, supernova remnants, pulsar winds and their nebulæ, active galactic nuclei, gamma-ray bursts and clusters of galaxies shock waves. Collisionless shock microphysics enters at different stages of shock formation, shock dynamics and particle energization and/or acceleration. It turns out that the shock phenomenon is a multi-scale non-linear problem in time and space. It is complexified by the impact due to high-energy cosmic rays in astrophysical environments. This review adresses the physics of shock formation, shock dynamics and particle acceleration based on a close examination of available multi-wavelength or in situ observations, analytical and numerical developments. A particular emphasis is made on the different instabilities triggered during the shock formation and in association with particle acceleration processes with regards to the properties of the background upstream medium. It appears that among the most important parameters the background magnetic field through the magnetization and its obliquity is the dominant one. The shock velocity that can reach relativistic speeds has also a strong impact over the development of the micro-instabilities and the fate of particle acceleration. Recent developments of laboratory shock experiments has started to bring some new insights in the physics of space plasma and astrophysical shock waves. A special section is dedicated to new laser plasma experiments probing shock physics.

Radiopacity and Chemical resistance of Elastomer-Barium sulphate nanocomposites

The Human race of our century is in gluttonous search for novel engineering products which led to a skyrocketed progress in research and fabrication of filled polymers. Recently, a big window has been opened up for speciality polymers especially elastomers with promising properties. Among the many reasons why rubbers are widely used in the process industries, three are considered as important. Firstly, rubbers operate in a variety of environments and possess usable ranges of deformity and durability and can be exploited through suitable and more or less conventional equipment design principles. Secondly, rubber is an eminently suitable construction material for protection against corrosion in the chemical plant and equipment against various corrosive chemicals as, acids and alkalies and if property tailored, can shield ionising radiations as X-rays and gamma rays in medical industry, with minimum maintenance lower down time, negligible corrosion and a preferred choice for aggressive corroding and ionising environment. Thirdly, rubber can readily and hastily, and at a relatively lower cost, be converted into serviceable products, having intricate shapes and dimensions. In a century’s gap, large employment of flexible polymer materials in the different segments of industry has stimulated the development of new materials with special properties, which paved its way to the synthesis of various nanoscale materials. At nano scale, one makes an entry into a world where multidisciplinary sciences meet and utilises the previously unapproached infinitesimal length scale, having dimension which measure upto one billionth of a meter, to create novel properties. The nano fillers augment the elastomers properties in an astonishing fashion due to their multifunctional nature and unprecedented properties have been exhibited by these polymer-nanocomposites just to beat the shortcomings of traditional micro composites. The current research aims to investigate the possibility of using synthesised nano barium sulphate for fabricating elastomer-based nanocomposites and thereby imparting several properties to the rubber. In this thesis, nano materials, their synthesis, structure, properties and applications are studied. The properties of barium sulphate like chemical resistance and radiopacity have been utilized in the present study and is imparted to the elastomers by preparing composites.

Stuck in the middle with you: The role of bridging organisations in urban regeneration

The literature on the governance of social-ecological systems increasingly recognizes a key role of bridging organisations (BOs) in transition processes towards sustainability. BOs can be defined as facilitators who allow for interorganisational collaboration. Our paper provides a more nuanced understanding of specific BO activities and their contributions towards urban sustainability. Our analysis is based on applying three complementary methodological angles (drawing on geolocalised data, interviews and action research) to 20 years of urban renovation investments in the city-region of Brussels. We distinguish between multi-scale, multi-actor and multi-dimensional tensions in urban renovation programmes and link these tensions to bridging challenges for BOs. Results suggest that the corresponding three types of bridging roles form a trilemma rather than a trilogy: the BOs in study have mediated one tension by de facto exacerbating another. Lessons from action research suggest that a wider use of temporality and shared language to communicate about urban renovation projects could attenuate the bridging trilemma.

Supporting data for Blossey et al (2016): CGILS Phase 2 LES intercomparison of response of subtropical marine low cloud regimes to CO2 quadrupling and a CMIP3-composite forcing change

This archive provides supporting data with forcings, data and plotting scripts for the paper P. N. Blossey, C. S. Bretherton, A. Cheng, S. Endo, T. Heus, A. Lock and J. J. van der Dussen, 2016. CGILS Phase 2 LES intercomparison of response of subtropical marine low cloud regimes to CO2 quadrupling and a CMIP3-composite forcing change. J. Adv. Model. Earth Syst., Under revision.

Padrões de organização das assembleias de aves florestais em uma paisagem fragmentada de Floresta Atlântica

Brazil is home to one of the richest avifaunas the world, which is subject to high levels of environmental degradation, in particular forest fragmentation. The Atlantic Forest biome depicts this history of devastation and today remains as small isolated fragments on highly degraded landscapes. This project aimed to evaluate the effects of forest fragmentation in an area with Atlantic Forest remnants in northern Paraná (Brazil) on the distribution and the organization of assemblage of forest birds and tested the hypothesis that the structure of the assembly in the fragments is different than expected by chance. We did four qualitative samplings of birds in three sets of forest fragments in the landscape, each with three fragments: large, medium and small. The method applied in the sampling was point counts along transects, traveled randomly for four hours in each fragment. Samples were taken in two periods: from September to November / 2013, and between March and May / 2014. The structure of the meeting was assessed by rates of co-occurring species (Checkerboard and CScore) and α diversity patterns (wealth) and β (turnover of species), while the landscape structure was analyzed from the parameters: area, distance between fragments, fractal dimension, edge density, fragment shape index and nuclear area index. The null hypothesis of no structure in the assembly of birds in the landscape was tested with null models from the co-occurrence indexes. The effects of landscape structure on the assembly of the structure were analyzed by the Mantel test and principal component analysis (PCA). The assembly of the structure in the landscape showed a pattern of spatiotemporal organization significantly different from that expected by chance, revealing a structure most influenced by segregation of the species. The fragments showed significant differences in richness, unlike sets of fragments, indicating relative homogeneity in the landscape structure. The differences between the size and the distance between the fragments significantly influenced the patterns of organization of the meeting of forest birds in the landscape and patterns of α and β diversity, indicating that the higher the fragment and smaller distances between them, more the standard of species cooccurrence is different than expected by chance. Thus, the fragmented landscape of remnants of the northern Paraná Atlantic Forest still has availability of environmental resources and physical characteristics that allow a persistent organizational structure of the assembly of forest birds in space over time.

A Generalized Methodology to Characterize Composite Materials for Pyrolysis Models

The predictive capabilities of computational fire models have improved in recent years such that models have become an integral part of many research efforts. Models improve the understanding of the fire risk of materials and may decrease the number of expensive experiments required to assess the fire hazard of a specific material or designed space. A critical component of a predictive fire model is the pyrolysis sub-model that provides a mathematical representation of the rate of gaseous fuel production from condensed phase fuels given a heat flux incident to the material surface. The modern, comprehensive pyrolysis sub-models that are common today require the definition of many model parameters to accurately represent the physical description of materials that are ubiquitous in the built environment. Coupled with the increase in the number of parameters required to accurately represent the pyrolysis of materials is the increasing prevalence in the built environment of engineered composite materials that have never been measured or modeled. The motivation behind this project is to develop a systematic, generalized methodology to determine the requisite parameters to generate pyrolysis models with predictive capabilities for layered composite materials that are common in industrial and commercial applications. This methodology has been applied to four common composites in this work that exhibit a range of material structures and component materials. The methodology utilizes a multi-scale experimental approach in which each test is designed to isolate and determine a specific subset of the parameters required to define a material in the model. Data collected in simultaneous thermogravimetry and differential scanning calorimetry experiments were analyzed to determine the reaction kinetics, thermodynamic properties, and energetics of decomposition for each component of the composite. Data collected in microscale combustion calorimetry experiments were analyzed to determine the heats of complete combustion of the volatiles produced in each reaction. Inverse analyses were conducted on sample temperature data collected in bench-scale tests to determine the thermal transport parameters of each component through degradation. Simulations of quasi-one-dimensional bench-scale gasification tests generated from the resultant models using the ThermaKin modeling environment were compared to experimental data to independently validate the models.

Hierarchical Reconstruction Method for Solving Ill-posed Linear Inverse Problems

We present a detailed analysis of the application of a multi-scale Hierarchical Reconstruction method for solving a family of ill-posed linear inverse problems. When the observations on the unknown quantity of interest and the observation operators are known, these inverse problems are concerned with the recovery of the unknown from its observations. Although the observation operators we consider are linear, they are inevitably ill-posed in various ways. We recall in this context the classical Tikhonov regularization method with a stabilizing function which targets the specific ill-posedness from the observation operators and preserves desired features of the unknown. Having studied the mechanism of the Tikhonov regularization, we propose a multi-scale generalization to the Tikhonov regularization method, so-called the Hierarchical Reconstruction (HR) method. First introduction of the HR method can be traced back to the Hierarchical Decomposition method in Image Processing. The HR method successively extracts information from the previous hierarchical residual to the current hierarchical term at a finer hierarchical scale. As the sum of all the hierarchical terms, the hierarchical sum from the HR method provides an reasonable approximate solution to the unknown, when the observation matrix satisfies certain conditions with specific stabilizing functions. When compared to the Tikhonov regularization method on solving the same inverse problems, the HR method is shown to be able to decrease the total number of iterations, reduce the approximation error, and offer self control of the approximation distance between the hierarchical sum and the unknown, thanks to using a ladder of finitely many hierarchical scales. We report numerical experiments supporting our claims on these advantages the HR method has over the Tikhonov regularization method.

Biomonitoramento da comunidade de macroinvertebrados de um reservatório de abastecimento público no sul do Brasil

The faunal inventory of the macroinvertebrate community is important to the environmental assessment, since this biota is sensitive to human disturbance. The reservoir of Rio Verde, located on the first plateau of Paraná, is inserted into an agricultural region with several forest fragments Araucaria. The aim of this study was to evaluate the environmental integrity of the reservoir through ecological indexes of macroinvertebrate community benthic and associated with macrophytes. Five sampling points were defined in the study area, which comprise distinct microhabitats in the basin. There were four sampling campaigns, each by weather station: Spring (2014); Summer (2015); Autumn (2015) and Winter (2015). In each sample were measured abiotic various parameters in the field and be collected water samples for nutrient analysis in the laboratory. The macroinvertebrates were collected in triplicate at adapted Macan method using mesh sieve 1 mm and CPUE (catch per unit effort) for 20 minutes. In order to pellet sample was used a dredger model Petersen 2L. Still in the field, by season, samples were collected from macrophytes Myriophyllum aquaticum (Vell) Verdc. and Potamogeton montevidensis A. Benn. in triplicates in the fluvial region of the reservoir, to analyze the associated fractal dimension and macrofauna. For this we used a PVC sampler specific volume 0.025 m3. the following ecological descriptors were calculated in each case: abundance, wealth tax, wealth Margalef, Shannon-Wiener diversity, evenness evenness through the Past software. The index Biological Monitoring Working Party (BMWP) for monitoring sampling points was also calculated. Regarding the statistical analysis, we used the analysis of PERMANOVA to compare points and seasons and canonical correspondence analysis (CCoA) for variables. Regarding M. aquaticum and P. montevidensis it was not verified difference to the average associated macroinvertebrates. However there was a difference for abundance of organisms in the fractal dimension and biomass of specimens. M. aquaticum is more complex and took more macrofauna in relation to P. montevidensis. Regarding the monitoring of the reservoir, it showed up mesotrophic with moderate nutrient concentrations and within the regulatory limits. Benthic macrofauna showed statistical differences in relation to the reservoir region, sample point and temporal variation. The BMWP index showed that the river region has the highest biotic integrity (in all samples above 70 points), and the ecological descriptors of wealth and Margalef diversity of Shannon- Wiener higher. In point 4 (dam downstream) were recorded evidence of possible impacts due to lower wealth and BMWP index which resulted in a questionable quality water. New approaches are needed to focus on the aquatic community in the best understanding of this ecosystem and also with a view to environmental preservation of the Green River Basin.

Provenance does matter: Links between winter trophic segregation and the migratory origins of European robins

Amongst migratory species, it is common to find individuals from different populations or geographical origins sharing staging or wintering areas. Given their differing life histories, ecological theory would predict that the different groups of individuals should exhibit some level of niche segregation. This has rarely been investigated because of the difficulty in assigning migrating individuals to breeding areas. Here, we start by documenting a broad geographical gradient of hydrogen isotopes (δ (2)H) in robin Erithacus rubecula feathers across Europe. We then use δ (2)H, as well as wing-tip shape, as surrogates for broad migratory origin of birds wintering in Iberia, to investigate the ecological segregation of populations. Wintering robins of different sexes, ages and body sizes are known to segregate between habitats in Iberia. This has been attributed to the despotic exclusion of inferior competitors from the best patches by dominant individuals. We find no segregation between habitats in relation to δ (2)H in feathers, or to wing-tip shape, which suggests that no major asymmetries in competitive ability exist between migrant robins of different origins. Trophic level (inferred from nitrogen isotopes in blood) correlated both with δ (2)H in feathers and with wing-tip shape, showing that individuals from different geographic origins display a degree of ecological segregation in shared winter quarters. Isotopic mixing models indicate that wintering birds originating from more northerly populations consume more invertebrates. Our multi-scale study suggests that trophic-niche segregation may result from specializations (arising in the population-specific breeding areas) that are transported by the migrants into the shared wintering grounds.