Early Functional Deficit and Microglial Disturbances in a Mouse Model of Amyotrophic Lateral Sclerosis

11 p.

Two-Dimensional Hillslope Scale Soil Erosion Model

On a hillslope, overland flow first generates sheet erosion and then, with increasing flux, it causes rill erosion. Sheet erosion (interrill erosion) and rill erosion are commonly observed to coexist on hillslopes. Great differences exist between both the intensities and incidences of rill and interrill erosion. In this paper, a two-dimensional rill and interrill erosion model is developed to simulate the details of the soil erosion process on hillslopes. The hillslope is treated as a combination of a two-dimensional interrill area and a one-dimensional rill. The rill process, the interrill process, and the joint occurrence of rill and interrill areas are modeled, respectively. Thus, the process of sheet flow replenishing rill flow with water and sediment can be simulated in detail, which may possibly render more truthful results for rill erosion. The model was verified with two sets of data and the results seem good. Using this model, the characteristics of soil erosion on hillslopes are investigated. Study results indicate that (1) the proposed model is capable of describing the complex process of interrill and rill erosion on hillslopes; (2) the spatial distribution of erosion is simulated on a simplified two-dimensional hillslope, which shows that the distribution of interrill erosion may contribute to rill development; and (3) the quantity of soil eroded increases rapidly with the slope gradient, then declines, and a critical slope gradient exists, which is about 15-20 degrees for the accumulated erosion amount.

Pure Coulomb explosions of highly charged methane clusters investigated by a simple electrostatic model

The pure Coulomb explosions of the methane clusters (CA(4))(n), (light atom A = H or D) have been investigated by a simplified electrostatic model for both a single cluster and an ensemble of clusters with a given cluster size distribution. The dependence of the energy of ions produced from the explosions on cluster size and the charge state of the carbon ions has been analysed. It is found that, unlike the average proton energy which increases with the charge q of the carbon ions, the average deuteron energy tends to saturate as q becomes larger than 4. This implies that when the laser intensity is sufficiently high for the (CD4)(n) to be ionized to a charge state of (C4+D4+)(n), the neutron yield from a table-top laser-driven Coulomb explosion of deuterated methane clusters (CD4)(n) could be increased significantly by increasing the interaction volume rather than by increasing the laser intensity to produce the higher charge state (C6+D4+)(n). The flight-time spectra of the carbon ions and the light ions have also been studied.

The Uniform World Model: A Methodology for Predicting the Health Impacts of Air Pollution

47 p.

Lehiaketa motor baten direkzio piparen diseinua

[EU]Hurrengo orrialdeetan aurkezten den proiektu honetan, lehiaketa motor baten direkzio piparen diseinua proposatzen da zeinak Moto Engineering Foundation fundazioak sustatutako nazioarteko Motostudent txapelketan parte hartzeko motorrera egokituta egon beharko den. Honako helburu honekin beraz, direkzio piparen diseinu egoki bat egin ahal izateko piezak sufrituko dituen karga egoerak aurreikusi beharko ditugu hauen arabera jasan beharreko tentsio egoerak aztertu ahal izateko. Piezaren tentsioen analisia aurrera eraman beharko da beraz, diseinaturiko piezaren funtzionamendu egokia ziurtatu ahal izateko. Historian zehar existitutako diseinu modelo ezberdinak eta baita gaur egunean gehien erabilitakoak ere aurkeztu eta gero, gure kasura hobekien moldatuko zaion adibidetik ekingo zaio diseinuari, aldez aurretik eskuratutako datu eta errodamenduetatik abiatuz. Horrenbestez, oinarritzat hartutako direkzio sistema modeloa eta bestelako elementuen neurriak datutzat hartuta, tija zein norabide ardatzarena esate baterako, direkzio piparen hasierako geometria definituko da. Eskuragarri ditugun analisi metodo ezberdinak aztertu eta gure kasura hobekien moldatzen dena aukeratu eta eraikitako piezari aplikatuko zaio. Lorturiko emaitzen arabera hasiera batean planteaturiko diseinua onartu edo baztertzea erabaki beharko dugu. Beraz, gure diseinua optimizatuz joateko aukera izango dugu, baldintzak eta betebeharrak egiztatuko dituen amaierako pieza diseinua lortu arte. Bukatzeko, proiektuari itxiera emango dion atala aurkeztuko da, hala nola, proiektuaren garapenean zehar lorturiko emaitzak eta ondorioak biltzen dituen atala non lorturiko direkzio piparen funtzionamendu egokia bermatzen dituzten parametroak aurkeztuko diren. Gainera, direkzio sistemaren funtsezko atala izango diren errodamenduen kalkulu eta aukeraketa bideratuko da baita ere.

Lehiaketa motor baten atzealde-suspentsio sistema doigarri baten elementuen diseinua

[EU]Proiektu hau lehiaketa motor baten atzealde-suspentsio sistema doigarri baten elementuen diseinuan datza. Luzeran erregulagarria izango den tirantea eta suspentsio triangelua diseinatu eta optimizatuko dira. Diseinuak ahalik eta pisu txikiena izatea ahalbidetzen duten makinen elementuak (errotulak eta errodamenduak) aukeratuko dira. Lanaren garapenerako Motostudent izeneko lehiaketatik hartutako datu errealak erabiliko dira. Suspentsio sistemaren diseinua Creo2.0 (lehengo Pro-Engineer) software-arekin egingo da. Bestalde, beste software batzuk ere erabiliko dira, hala nola, Working Model 2D eta ANSYS, sistemaren analisia errazteko.

A model for energy and morphology of crystalline grain boundaries with arbitrary geometric character

It has been well-established that interfaces in crystalline materials are key players in the mechanics of a variety of mesoscopic processes such as solidification, recrystallization, grain boundary migration, and severe plastic deformation. In particular, interfaces with complex morphologies have been observed to play a crucial role in many micromechanical phenomena such as grain boundary migration, stability, and twinning. Interfaces are a unique type of material defect in that they demonstrate a breadth of behavior and characteristics eluding simplified descriptions. Indeed, modeling the complex and diverse behavior of interfaces is still an active area of research, and to the author's knowledge there are as yet no predictive models for the energy and morphology of interfaces with arbitrary character. The aim of this thesis is to develop a novel model for interface energy and morphology that i) provides accurate results (especially regarding "energy cusp" locations) for interfaces with arbitrary character, ii) depends on a small set of material parameters, and iii) is fast enough to incorporate into large scale simulations.

In the first half of the work, a model for planar, immiscible grain boundary is formulated. By building on the assumption that anisotropic grain boundary energetics are dominated by geometry and crystallography, a construction on lattice density functions (referred to as "covariance") is introduced that provides a geometric measure of the order of an interface. Covariance forms the basis for a fully general model of the energy of a planar interface, and it is demonstrated by comparison with a wide selection of molecular dynamics energy data for FCC and BCC tilt and twist boundaries that the model accurately reproduces the energy landscape using only three material parameters. It is observed that the planar constraint on the model is, in some cases, over-restrictive; this motivates an extension of the model.

In the second half of the work, the theory of faceting in interfaces is developed and applied to the planar interface model for grain boundaries. Building on previous work in mathematics and materials science, an algorithm is formulated that returns the minimal possible energy attainable by relaxation and the corresponding relaxed morphology for a given planar energy model. It is shown that the relaxation significantly improves the energy results of the planar covariance model for FCC and BCC tilt and twist boundaries. The ability of the model to accurately predict faceting patterns is demonstrated by comparison to molecular dynamics energy data and experimental morphological observation for asymmetric tilt grain boundaries. It is also demonstrated that by varying the temperature in the planar covariance model, it is possible to reproduce a priori the experimentally observed effects of temperature on facet formation.

Finally, the range and scope of the covariance and relaxation models, having been demonstrated by means of extensive MD and experimental comparison, future applications and implementations of the model are explored.

Lehiaketa motor baten kate bidezko transmisioaren diseinua

[EU]Lan honen helburu nagusia, bi denborako lehiaketa motor baten kate bidezko transmisioaren diseinua egitea da, hau da, pinoi-kate-koroa multzoaren diseinua. Horretarako pinoia eta koroaren dimentsionaketa egingo da eta aplikazio honetarako kate mota egokiena aukeratuko da. Diseinua egin aurretik, metodologia desberdinak aztertuko dira eta eskuragarri dauden datuen arabera metodologia egokiena aukeratuko da. Lanaren garapenerako Motostudent lehiaketatik hartutako datu errealak erabiliko dira. Gainera, pieza desberdinen CAD eredua egingo da PTC Creo programa erabiliz.

Efeitos da hipóxia-isquemia perinatal sobre o comportamento motor, distribuição da Tirosina Hidroxilase na substância negra e da NADPH diaforase no hipocampo durante o desenvolvimento em ratos

A hipóxia isquemia (HI) pré-natal é uma das principais causas de mortalidade e doenças neurológicas crônicas em neonatos, que podem apresentar déficits remanentes como: retardamento, paralisia cerebral, dificuldade de aprendizado ou epilepsia. Estes prejuízos, provavelmente, estão relacionados com o atraso no desenvolvimento neural, astrogliose e com a perda de neurônios e oligodendrócitos. Déficits funcionais e cognitivos estão associados à degeneração de vias dopaminérgicas e de estruturas hipocampais. A enzima tirosina hidroxilase (TH) é a enzima limitante na síntese de dopamina e seus níveis são alterados em eventos de HI. O óxido nítrico (NO) é um gás difusível que atua modulando diferentes sistemas, participando de eventos como plasticidade sináptica e neuromodulação no sistema nervoso central e é produzido em grandes quantidades em eventos de injúria e inflamação, como é o caso da HI. O presente estudo teve por objetivos avaliar, utilizando o modelo criado por Robinson e colaboradores em 2005, os efeitos da HI sobre o comportamento motor e avaliar o desenvolvimento de estruturas encefálicas relacionadas a este comportamento como a substância negra (SN) e o complexo hipocampal. A HI foi induzida a partir do clampeamento das artérias uterinas da rata grávida, por 45 minutos no décimo oitavo dia de gestação (grupo HI). Em um grupo de fêmeas a cirurgia foi realizada, mas não houve clampeamento das artérias (grupo SHAM). A avaliação do comportamento motor foi realizada com os testes ROTAROD e de campo aberto em animais de 45 dias. Os encéfalos foram processados histologicamente nas idades de P9, P16, P23 e P90, sendo então realizada imunohistoquímica para TH e histoquímica para NADPH diaforase (NADPH-d), para avaliação do NO. Nossos resultados demonstraram redução da imunorreatividade para a TH em corpos celulares na SN aos 16 dias no grupo HI e aumento na imunorreatividade das fibras na parte reticulada aos 23 dias, com a presença de corpos celulares imunorreativos nesta região no grupo HI. Demonstramos também aumento do número de células marcadas para NADPH-d no giro dentado nos animais HI, nas idades analisadas, assim como aumento na intensidade de reação no corno de Ammon (CA1 e CA3) aos 9 dias no grupo HI, e posterior redução nesta marcação aos 23 e 90dias neste mesmo grupo. Nos testes comportamentais, observamos diminuição da atividade motora no grupo HI com uma melhora do desempenho ao longo dos testes no ROTAROD, sem entretanto atingir o mesmo nível do grupo SHAM. Os animais HI não apresentaram maior nível de ansiedade em relação ao grupo SHAM, descartando a hipótese das alterações observadas nos testes de motricidade estarem relacionadas a fatores ansiogênicos. O modelo de clampeamento das artérias uterinas da fêmea se mostrou uma ferramenta importante no estudo das alterações decorrentes do evento de HI pré-natal, por produzir diversos resultados que são similares aos ocorridos em neonatos que passam por este evento.

Simplified Formulae for the Estimation of Offshore Wind Turbines Clutter on Marine Radars

The potential impact that offshore wind farms may cause on nearby marine radars should be considered before the wind farm is installed. Strong radar echoes from the turbines may degrade radars' detection capability in the area around the wind farm. Although conventional computational methods provide accurate results of scattering by wind turbines, they are not directly implementable in software tools that can be used to conduct the impact studies. This paper proposes a simple model to assess the clutter that wind turbines may generate on marine radars. This method can be easily implemented in the system modeling software tools for the impact analysis of a wind farm in a real scenario.

Brca1 is expressed in human microglia and is dysregulated in human and animal model of ALS

Background: There is growing evidence that microglia are key players in the pathological process of amyotrophic lateral sclerosis (ALS). It is suggested that microglia have a dual role in motoneurone degeneration through the release of both neuroprotective and neurotoxic factors. Results: To identify candidate genes that may be involved in ALS pathology we have analysed at early symptomatic age (P90), the molecular signature of microglia from the lumbar region of the spinal cord of hSOD1(G93A) mice, the most widely used animal model of ALS. We first identified unique hSOD1(G93A) microglia transcriptomic profile that, in addition to more classical processes such as chemotaxis and immune response, pointed toward the potential involvement of the tumour suppressor gene breast cancer susceptibility gene 1 (Brca1). Secondly, comparison with our previous data on hSOD1(G93A) motoneurone gene profile substantiated the putative contribution of Brca1 in ALS. Finally, we established that Brca1 protein is specifically expressed in human spinal microglia and is up-regulated in ALS patients. Conclusions: Overall, our data provide new insights into the pathogenic concept of a non-cell-autonomous disease and the involvement of microglia in ALS. Importantly, the identification of Brca1 as a novel microglial marker and as possible contributor in both human and animal model of ALS may represent a valid therapeutic target. Moreover, our data points toward novel research strategies such as investigating the role of oncogenic proteins in neurodegenerative diseases.

An extended computational model of the circulatory system for designing ventricular assist devices.

An extended computational model of the circulatory system has been developed to predict blood flow in the presence of ventricular assist devices (VADs). A novel VAD, placed in the descending aorta, intended to offload the left ventricle (LV) and augment renal perfusion is being studied. For this application, a better understanding of the global hemodynamic response of the VAD, in essence an electrically driven pump, and the cardiovascular system is necessary. To meet this need, a model has been established as a nonlinear, lumped-parameter electrical analog, and simulated results under different states [healthy, congestive heart failure (CHF), and postinsertion of VAD] are presented. The systemic circulation is separated into five compartments and the descending aorta is composed of three components to accurately yield the system response of each section before and after the insertion of the VAD. Delays in valve closing time and blood inertia in the aorta were introduced to deliver a more realistic model. Pump governing equations and optimization are based on fundamental theories of turbomachines and can serve as a practical initial design point for rotary blood pumps. The model's results closely mimic established parameters for the circulatory system and confirm the feasibility of the intra-aortic VAD concept. This computational model can be linked with models of the pump motor to provide a valuable tool for innovative VAD design.

Wave digital filter model of the entire auditory periphery

A model of the auditory periphery assembled from analog network submodels of all the relevant anatomical structures is described. There is bidirectional coupling between networks representing the outer ear, middle ear and cochlea. A simple voltage source representation of the outer hair cells provides level-dependent basilar membrane curves. The networks are translated into efficient computational modules by means of wave digital filtering. A feedback unit regulates the average firing rate at the output of an inner hair cell module via a simplified modelling of the dynamics of the descending paths to the peripheral ear. This leads to a digital model of the entire auditory periphery with applications to both speech and hearing research.

Effects of rotating inlet distortion on multistage compressor stability

In multi-spool engines, rotating stall in an upstream compressor will impose a rotating distortion on the downstream compressor, thereby affecting its stability margin. In this paper experiments are described in which this effect was simulated by a rotating screen upstream of several multistage low-speed compressors. The measurements are complemented by, and compared with, a theoretical model of multistage compressor response to speed and direction of rotation of an inlet distortion. For co-rotating distortions (i.e., distortions rotating in the same direction as rotor rotation), experiments show that the compressors exhibited significant loss in stability margin and that they could be divided into two groups according to their response. The first group exhibited a single peak in stall margin degradation when the distortion speed corresponded to roughly 50% of rotor speed. The second group showed two peaks in stall margin degradation corresponding to distortion speeds of approximately 25-35% and 70-75% of rotor speed. These new results demonstrate that multistage compressors can have more than a single resonant response. Detailed measurements suggest that the two types of behavior are linked to differences between the stall inception processes observed for the two groups of compressors and that a direct connection thus exists between the observed forced response and the unsteady flow phenomena at stall onset. For counter-rotational distortions, all the compressors tested showed minimal loss of stability margin. The results imply that counter-rotation of the fan and core compressor, or LP and HP compressors, could be a worthwhile design choice. Calculations based on the two-dimensional theoretical model show excellent agreement for the compressors which had a single peak for stall margin degradation. We take this first-of-a-kind comparison as showing that the model, though simplified, captures the essential fluid dynamic features of the phenomena. Agreement is not good for compressors which had two peaks in the curve of stall margin shift versus distortion rotation speed. The discrepancy is attributed to the three-dimensional and short length scale nature of the stall inception process in these machines; this includes phenomena that have not yet been addressed in any model.

On the domain decomposition and transmission line modelling finite element method for time-domain induction motor analysis

This paper demonstrates how a finite element model which exploits domain decomposition is applied to the analysis of three-phase induction motors. It is shown that a significant gain in cpu time results when compared with standard finite element analysis. Aspects of the application of the method which are particular to induction motors are considered: the means of improving the convergence of the nonlinear finite element equations; the choice of symmetrical sub-domains; the modelling of relative movement; and the inclusion of periodic boundary conditions. © 1999 IEEE.