Uma investigação funcional do verbo modal deber no espanhol falado peninsular

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Flutter analysis including structural uncertainties

The common practice in industry is to perform flutter analyses considering the generalized stiffness and mass matrices obtained from finite element method (FEM) and aerodynamic generalized force matrices obtained from a panel method, as the doublet lattice method. These analyses are often reperformed if significant differences are found in structural frequencies and damping ratios determined from ground vibration tests compared to FEM. This unavoidable rework can result in a lengthy and costly process of analysis during the aircraft development. In this context, this paper presents an approach to perform flutter analysis including uncertainties in natural frequencies and damping ratios. The main goal is to assure the nominal system’s stability considering these modal parameters varying in a limited range. The aeroelastic system is written as an affine parameter model and the robust stability is verified solving a Lyapunov function through linear matrix inequalities and convex optimization

Pre- and Postoperative Quantitative Analysis of Contour Abnormalities in Graves Upper Eyelid Retraction

Purpose: One of the most common problems of the surgical management of Graves upper eyelid retraction is the occurrence of eyelid contour abnormalities. In the present study, the postoperative contour of a large sample of eyelids of patients with Graves orbitopathy was measured. Methods: The postoperative upper eyelid contour of 62 eyes of 43 patients with Graves orbitopathy was subjectively classified by 3 experienced surgeons in 3 categories: poor, fair, and good. The shape of the eyelid contours in each category was then measured with a recently developed custom-made software by measuring multiple midpupil eyelid distances each 15 degrees along the palpebral fissure. The upper eyelid contour of 60 normal subjects was also quantified as a control group. Results: The mean ratio between the sum of the lateral and medial midpupil eyelid distances (lateral/medial ratio) was 1.10 +/- 0.11 standard deviation in controls and 1.15 +/- 0.13 standard deviation in patients. Postoperatively, the mean midpupil eyelid distance at 90 degrees was 4.16 +/- 1.13 mm standard deviation. The distribution lateral/medial ratios of the eyelids judged as having good contours was similar to the distribution of the controls with a modal value centered on the interval between 1.0 and 1.10. The distribution of lateral/medial ratios of the eyelids judged as having poor contour was bimodal, with eyelids with low and high lateral/medial ratios. Low lateral/medial ratios occurred when there was a lateral overcorrection, giving the eyelid a flat or a medial ptosis appearance. High lateral/medial ratios were due to a central or medial overcorrection or a lateral peak maintenance. Conclusions: Postoperative upper eyelid contour abnormalities can be quantified by comparing the sum of multiple midpupil eyelid distances of the lateral and medial sectors of the eyelid. Low and high lateral/medial ratios are anomalous and judged as unpleasant. (Ophthal Plast Reconstr Surg 2012;28:429-433)

Modal hedges in para-pharmaceutical product instructions: some examples from English and Serbian

[EN] The paper investigates how modal hedges (Coates 1983) understood as expressions of procedural meaning , i.e. expressions which instruct the addressee/reader how to process the propositional content of an utterance/statement (Watts 2004) are used in product descriptions, advertisements and consumer instructions leaflets for a number of products belonging to the Consumer Health Care category for the purposes of complying with consumer protection laws on the one hand and serving as an implicit disclaimer of manufacturer’s responsibility on the other. The analysis is carried out contrastively for two languages, English and Serbian. The results obtained are discussed and viewed as a matter of cultural variety and difference, especially taking into consideration the fact that consumer protection laws seem to be equally strict in US, UK and Commonwealth, Europe and Serbia.

A contrastive analysis of epistemic modality in scientific English

[ES] This paper investigates the use of epistemic expressions in scientific English. The main aim of this research is to analyse if native speakers of English use epistemic modality in the same way than non-native speakers of English and to detect the most outstanding cognitive implications of this fact. The corpus used in this research contains 50 research papers written by native English speakers and 50 scientific papers written by Spanish researchers who use English to communicate internationally. As epistemic modals are used to indicate the possibility of some piece of knowledge, this paper focuses on epistemic modal verbs in order to detect if native speakers of English and non-native speakers of English communicate modality in the same way, or if there are differences in frequency and use. The results obtained in this analysis indicated that there are differences in the frequency of use of epistemic expressions, even if the intention of the writers is the same.

Calculation of the eigenfunctions of the two-group neutron diffusion equation and application to modal decomposition of BWR instabilities

In this thesis, numerical methods aiming at determining the eigenfunctions, their adjoint and the corresponding eigenvalues of the two-group neutron diffusion equations representing any heterogeneous system are investigated. First, the classical power iteration method is modified so that the calculation of modes higher than the fundamental mode is possible. Thereafter, the Explicitly-Restarted Arnoldi method, belonging to the class of Krylov subspace methods, is touched upon. Although the modified power iteration method is a computationally-expensive algorithm, its main advantage is its robustness, i.e. the method always converges to the desired eigenfunctions without any need from the user to set up any parameter in the algorithm. On the other hand, the Arnoldi method, which requires some parameters to be defined by the user, is a very efficient method for calculating eigenfunctions of large sparse system of equations with a minimum computational effort. These methods are thereafter used for off-line analysis of the stability of Boiling Water Reactors. Since several oscillation modes are usually excited (global and regional oscillations) when unstable conditions are encountered, the characterization of the stability of the reactor using for instance the Decay Ratio as a stability indicator might be difficult if the contribution from each of the modes are not separated from each other. Such a modal decomposition is applied to a stability test performed at the Swedish Ringhals-1 unit in September 2002, after the use of the Arnoldi method for pre-calculating the different eigenmodes of the neutron flux throughout the reactor. The modal decomposition clearly demonstrates the excitation of both the global and regional oscillations. Furthermore, such oscillations are found to be intermittent with a time-varying phase shift between the first and second azimuthal modes.

Analysis of preferences for freight transport using advanced choice models

Programa de doctorado: Perspectivas científicas sobre el turismo y la dirección de empresas turísticas

Molecular analysis of special type breast carcinomas

The project was developed into three parts: the analysis of p63 isoform in breast tumours; the study of intra-tumour eterogeneicity in metaplastic breast carcinoma; the analysis of oncocytic breast carcinoma. p63 is a sequence-specific DNA-binding factor, homologue of the tumour suppressor and transcription factor p53. The human p63 gene is composed of 15 exons and transcription can occur from two distinct promoters: the transactivating isoforms (TAp63) are generated by a promoter upstream of exon 1, while the alternative promoter located in intron 3 leads to the expression of N-terminal truncated isoforms (ΔNp63). It has been demonstrated that anti-p63 antibodies decorate the majority of squamous cell carcinomas of different organs; moreover tumours with myoepithelial differentiation of the breast show nuclear p63 expression. Two new isoforms have been described with the same sequence as TAp63 and ΔNp63 but lacking exon 4: d4TAp63 and ΔNp73L, respectively. Purpose of the study was to investigate the molecular expression of N-terminal p63 isoforms in benign and malignant breast tissues. In the present study 40 specimens from normal breast, benign lesions, DIN/DCIS, and invasive carcinomas were analyzed by immunohistochemistry and RT-PCR (Reverse Transcriptase-PCR) in order to disclose the patterns of p63 expression. We have observed that the full-length isoforms can be detected in non neoplastic and neoplastic lesions, while the short isoforms are only present in the neoplastic cells of invasive carcinomas. Metaplastic carcinomas of the breast are a heterogeneous group of neoplasms which exhibit varied patterns of metaplasia and differentiation. The existence of such non-modal populations harbouring distinct genetic aberrations may explain the phenotypic diversity observed within a given tumour. Intra-tumour morphological heterogeneity is not uncommon in breast cancer and it can often be appreciated in metaplastic breast carcinomas. Aim of this study was to determine the existence of intra-tumour genetic heterogeneity in metaplastic breast cancers and whether areas with distinct morphological features in a given tumour might be underpinned by distinct patterns of genetic aberrations. 47 cases of metaplastic breast carcinomas were retrieved. Out of the 47 cases, 9 had areas that were of sufficient dimensions to be independently microdissected. Our results indicate that at least some breast cancers are composed of multiple non-modal populations of clonally related cells and provide direct evidence that at least some types of metaplastic breast cancers are composed of multiple non-modal clones harbouring distinct genetic aberrations. Oncocytic tumours represent a distinctive set of lesions with typical granular cytoplasmatic eosinophilia of the neoplastic cells. Only rare example of breast oncocytic carcinomas have been reported in literature and the incidence is probably underestimated. In this study we have analysed 33 cases of oncocytic invasive breast carcinoma of the breast, selected according to morphological and immunohistochemical criteria. These tumours were morphologically classified and studied by immunohistochemistry and aCGH. We have concluded that oncocytic breast carcinoma is a morphologic entity with distinctive ultrastructural and histological features; immunohistochemically is characterized by a luminal profile, it has a frequency of 19.8%, has not distinctive clinical features and, at molecular level, shows a specific constellation of genetic aberration.

Dynamic identification of structures: experimental assessment of modal parameteres through methods in frequency domain, in time-frequency domain and model updating

Among the experimental methods commonly used to define the behaviour of a full scale system, dynamic tests are the most complete and efficient procedures. A dynamic test is an experimental process, which would define a set of characteristic parameters of the dynamic behaviour of the system, such as natural frequencies of the structure, mode shapes and the corresponding modal damping values associated. An assessment of these modal characteristics can be used both to verify the theoretical assumptions of the project, to monitor the performance of the structural system during its operational use. The thesis is structured in the following chapters: The first introductive chapter recalls some basic notions of dynamics of structure, focusing the discussion on the problem of systems with multiply degrees of freedom (MDOF), which can represent a generic real system under study, when it is excited with harmonic force or in free vibration. The second chapter is entirely centred on to the problem of dynamic identification process of a structure, if it is subjected to an experimental test in forced vibrations. It first describes the construction of FRF through classical FFT of the recorded signal. A different method, also in the frequency domain, is subsequently introduced; it allows accurately to compute the FRF using the geometric characteristics of the ellipse that represents the direct input-output comparison. The two methods are compared and then the attention is focused on some advantages of the proposed methodology. The third chapter focuses on the study of real structures when they are subjected to experimental test, where the force is not known, like in an ambient or impact test. In this analysis we decided to use the CWT, which allows a simultaneous investigation in the time and frequency domain of a generic signal x(t). The CWT is first introduced to process free oscillations, with excellent results both in terms of frequencies, dampings and vibration modes. The application in the case of ambient vibrations defines accurate modal parameters of the system, although on the damping some important observations should be made. The fourth chapter is still on the problem of post processing data acquired after a vibration test, but this time through the application of discrete wavelet transform (DWT). In the first part the results obtained by the DWT are compared with those obtained by the application of CWT. Particular attention is given to the use of DWT as a tool for filtering the recorded signal, in fact in case of ambient vibrations the signals are often affected by the presence of a significant level of noise. The fifth chapter focuses on another important aspect of the identification process: the model updating. In this chapter, starting from the modal parameters obtained from some environmental vibration tests, performed by the University of Porto in 2008 and the University of Sheffild on the Humber Bridge in England, a FE model of the bridge is defined, in order to define what type of model is able to capture more accurately the real dynamic behaviour of the bridge. The sixth chapter outlines the necessary conclusions of the presented research. They concern the application of a method in the frequency domain in order to evaluate the modal parameters of a structure and its advantages, the advantages in applying a procedure based on the use of wavelet transforms in the process of identification in tests with unknown input and finally the problem of 3D modeling of systems with many degrees of freedom and with different types of uncertainty.

Modelling and analysis of thin-walled beams in the context of the Generalized Beam Theory

In this work, the Generalized Beam Theory (GBT) is used as the main tool to analyze the mechanics of thin-walled beams. After an introduction to the subject and a quick review of some of the most well-known approaches to describe the behaviour of thin-walled beams, a novel formulation of the GBT is presented. This formulation contains the classic shear-deformable GBT available in the literature and contributes an additional description of cross-section warping that is variable along the wall thickness besides along the wall midline. Shear deformation is introduced in such a way that the classical shear strain components of the Timoshenko beam theory are recovered exactly. According to the new kinematics proposed, a reviewed form of the cross-section analysis procedure is devised, based on a unique modal decomposition. Later, a procedure for a posteriori reconstruction of all the three-dimensional stress components in the finite element analysis of thin-walled beams using the GBT is presented. The reconstruction is simple and based on the use of three-dimensional equilibrium equations and of the RCP procedure. Finally, once the stress reconstruction procedure is presented, a study of several existing issues on the constitutive relations in the GBT is carried out. Specifically, a constitutive law based on mirroring the kinematic constraints of the GBT model into a specific stress field assumption is proposed. It is shown that this method is equally valid for isotropic and orthotropic beams and coincides with the conventional GBT approach available in the literature. Later on, an analogous procedure is presented for the case of laminated beams. Lastly, as a way to improve an inherently poor description of shear deformability in the GBT, the introduction of shear correction factors is proposed. Throughout this work, numerous examples are provided to determine the validity of all the proposed contributions to the field.

Multimodal viral communication: a social semiotic analysis of the popular Spanish "Ola ke ase" meme

Multimodality – the interdependence of semiotic resources in text – is an existential element of today’s media. The term multimodality attends systematically to the social interpretation of a wide range of communicational forms used in meaning making. A primary focus of social- semiotic multimodal analysis is on mapping how modal resources are used by people in a given social context. In November 2012 the “Ola ke ase” catchphrase, which is a play on “Hola ¿qué hace?”, appeared for the first time in Spain and immediately has been adopted as a Twitter hashtag and an image macro series. Its viral spread on social networks has been tremendous, being a trending topic in various Spanish-speaking countries. The objective of analysis is how language and image work together in the “Ola ke ase” meme. The interplay between text and image in one of the original memes and some of its variations is quantitatively analysed applying a social-semiotic approach. Results demonstrate how the “Ola ke ase” meme functions through its multimodal character and the non-standard orthography. The spread of uncountable variations of the meme shows the social process that goes on in the meaning making of the semiotic elements.

Multi-modal glioblastoma segmentation: man versus machine

BACKGROUND AND PURPOSE Reproducible segmentation of brain tumors on magnetic resonance images is an important clinical need. This study was designed to evaluate the reliability of a novel fully automated segmentation tool for brain tumor image analysis in comparison to manually defined tumor segmentations. METHODS We prospectively evaluated preoperative MR Images from 25 glioblastoma patients. Two independent expert raters performed manual segmentations. Automatic segmentations were performed using the Brain Tumor Image Analysis software (BraTumIA). In order to study the different tumor compartments, the complete tumor volume TV (enhancing part plus non-enhancing part plus necrotic core of the tumor), the TV+ (TV plus edema) and the contrast enhancing tumor volume CETV were identified. We quantified the overlap between manual and automated segmentation by calculation of diameter measurements as well as the Dice coefficients, the positive predictive values, sensitivity, relative volume error and absolute volume error. RESULTS Comparison of automated versus manual extraction of 2-dimensional diameter measurements showed no significant difference (p = 0.29). Comparison of automated versus manual segmentation of volumetric segmentations showed significant differences for TV+ and TV (p<0.05) but no significant differences for CETV (p>0.05) with regard to the Dice overlap coefficients. Spearman's rank correlation coefficients (ρ) of TV+, TV and CETV showed highly significant correlations between automatic and manual segmentations. Tumor localization did not influence the accuracy of segmentation. CONCLUSIONS In summary, we demonstrated that BraTumIA supports radiologists and clinicians by providing accurate measures of cross-sectional diameter-based tumor extensions. The automated volume measurements were comparable to manual tumor delineation for CETV tumor volumes, and outperformed inter-rater variability for overlap and sensitivity.

Relación precipitación-escorrentía y número de curva bajo diferentes condiciones de uso del suelo: : cuenca modal del sistema serrano de La Ventana, Argentina

La metodología del número de la curva (NC) es la más empleada para transformar la precipitación total en precipitación efectiva. De esta manera se constituye en una herramienta de gran valor para realizar estudios hidrológicos en cuencas hidrográficas, fundamentalmente cuando hay una deficiencia de registros extensos y confiables. Esta metodología requiere del conocimiento del tipo y uso de suelo de la cuenca en estudio y registros pluviográficos. En el presente trabajo se aplicó el procesamiento de imágenes LANDSAT para la zonificación de la vegetación y uso del suelo en la cuenca del Arroyo Pillahuinco Grande (38° LS y 61° 15' LW), ubicada sobre el sistema serrano de La Ventana, en el sudoeste de la provincia de Buenos Aires, Argentina. El análisis de su interrelación generó los valores de NC y coeficiente de escorrentía (CE). El procesamiento digital de la base de datos raster georreferenciada se realizó con aplicación de herramientas de sistema de información geográfica (Idrisi Kilimanjaro). El análisis de regresión múltiple efectuado a las variables generó un R2 que explica el 89,77 % de la variabilidad de CE (a < 0,01). Los resultados se exponen a nivel diagnóstico y zonificación del NC, donde la mayor influencia de la escorrentía se relaciona con las variables cobertura vegetal y uso del suelo.

Geochemical analysis of minerals from sediment core CRP-2 in the Ross Sea, Antarctica

Distribution patterns, petrography, whole-rock and mineral chemistry, and shape and fabric data are described for the most representative basement lithologies occurring as clasts (granule to bolder grain-size class) from the 625 m deep CRP-2/2A drillcore. A major change in the distribution pattern of the clast types occurs at c. 310 mbsf., with granitoid-dominated clasts above and mainly dolerite clasts below; moreover, compositional and modal data suggest a further division into seven main detrital assemblages or petrofacies. In spite of this variability, most granitoid pebbles consist of either pink or grey biotite±hornblende monzogranites. Other less common and ubiquitous lithologies include biotite syenogranite, biotite-hornblende granodiorite, tonalite, monzogranitic porphyries (very common below 310 mbsf), microgranite, and subordinately, monzogabbro, Ca-silicate rocks, biotite-clinozoisite schist and biotite orthogneiss (restricted to the pre-Pliocene strata). The ubiquitous occurrence of biotite±hornblende monzogranite pebbles in both the Quaternary-Pliocene and Miocene-Oligocene sections, apparently reflects the dominance of these lithologies in the onshore basement, and particularly in the Cambro-Ordovician Granite Harbour Igneous Complex which forms the most extensive outcrop in southern Victoria Land. The petrographical features of the other CRP-2/2A pebble lithologies are consistent with a supply dominantly from areas of the Transantarctic Mountains facing the CRP-2/2A site, and they thus provide further evidence of a local provenance for the supply of basement clasts to the CRP-2/2A sedimentary strata.