Análisis del entorno colaborativo creado para una experiencia de mobile learning

Se presentan los resultados de una investigación sobre las concepciones y usos de dispositivos móviles de un grupo de estudiantes que trabajaron en un entorno de aprendizaje colaborativo como parte un proceso de e-learning. Se emplearon dos métodos de investigación, en primer lugar el análisis del contenido de los mensajes de un foro de discusión enviados durante todo el curso, para recoger datos acerca del uso y la valoración que hacían del proceso de mobile learning. Posteriormente, mediante las entrevistas en profundidad, se analizó la percepción de mobile learning y los cambios producido durante el curso en el entorno colaborativo de aprendizaje. Los resultados indican que el entorno de intercambio creado amplifica la participación y colaboración entre los alumnos en el proceso de mobile learning, favoreciendo un mayor protagonismo de los estudiantes en una experiencia de aprendizaje online.

Landslide detection and monitoring capability of boat-based mobile laser scanning along Dieppe coastal cliffs, Normandy

Integrated in a wide research assessing destabilizing and triggering factors to model cliff dynamic along the Dieppe's shoreline in High Normandy, this study aims at testing boat-based mobile LiDAR capabilities by scanning 3D point clouds of the unstable coastal cliffs. Two acquisition campaigns were performed in September 2012 and September 2013, scanning (1) a 30-km-long shoreline and (2) the same test cliffs in different environmental conditions and device settings. The potentials of collected data for 3D modelling, change detection and landslide monitoring were afterward assessed. By scanning during favourable meteorological and marine conditions and close to the coast, mobile LiDAR devices are able to quickly scan a long shoreline with median point spacing up to 10cm. The acquired data are then sufficiently detailed to map geomorphological features smaller than 0.5m2. Furthermore, our capability to detect rockfalls and erosion deposits (>m3) is confirmed, since using the classical approach of computing differences between sequential acquisitions reveals many cliff collapses between Pourville and Quiberville and only sparse changes between Dieppe and Belleville-sur-Mer. These different change rates result from different rockfall susceptibilities. Finally, we also confirmed the capability of the boat-based mobile LiDAR technique to monitor single large changes, characterizing the Dieppe landslide geometry with two main active scarps, retrogression up to 40m and about 100,000m3 of eroded materials.

Mobile ensembles: The uses of mobile phones for social protest by Spain¿s indignados

Peer-reviewed

Adaptive optimization schemes for mobile VoIP applications Battery life and call quality aspects

In this thesis programmatic, application-layer means for better energy-efficiency in the VoIP application domain are studied. The work presented concentrates on optimizations which are suitable for VoIP-implementations utilizing SIP and IEEE 802.11 technologies. Energy-saving optimizations can have an impact on perceived call quality, and thus energy-saving means are studied together with those factors affecting perceived call quality. In this thesis a general view on a topic is given. Based on theory, adaptive optimization schemes for dynamic controlling of application's operation are proposed. A runtime quality model, capable of being integrated into optimization schemes, is developed for VoIP call quality estimation. Based on proposed optimization schemes, some power consumption measurements are done to find out achievable advantages. Measurement results show that a reduction in power consumption is possible to achieve with the help of adaptive optimization schemes.

Comovement of stock price risk in strategic alliance — Case: mobile internet

The focus of this study has been comovement of stock price risk level between two companies as they form strategic alliance. Thus the main reason has been to shed more light to possible increased risk level that the stockholder confronts when a company he owns forms a strategic alliance with another company. This study has centralized to interfirm cooperation between mobile and internet companies, which have furthered the development of mobile internet. The study has been divided into theoretical and empirical part. In theoretical part the main concepts riskiness of a stock (volatility), comovement and strategic alliance have been run through. In empirical part seven strategic alliances formed by mobile internet companies have been examined. Based on this, strategic alliance seems to increase comovement of stock price risk in some degree. This comovement seems to be stronger when core businesses or operating environments of cooperating companies differ more from each other.

Social Networking on Mobile Environment on top of PeerHood

Social networking and social networking sites have gained popularity among internet users during the past few years. Social networks fulfill the need of users to stay connected to friends and other people interested in the same issues. Combining social networks to the mobile environment is a growing interest of mobile device users as it allows the users to be in their online social community despite their mobility. This thesis highlights the basics of mobile environment, social networking and PeerHood and introduces a new approach of social networking on mobile environment, which is a new concept in mobile social networking. This approach is based on dynamic group discovery in accordance to some common user interests and management in the PeerHood environment. A reference implementation of a social networking application built on top of PeerHood is presented and it is tested and analyzed to understand the social networking on mobile environment and the new concept of dynamic group discovery in it.

Arduino Tricorder : Aplicació Android per a la supervisió, control i adquisició de dades d'una placa Arduino

Aplicació Android per a la supervisió, control i adquisició de dades d'una placa Arduino que disposi de comuninació Ethernet i/o Wi-Fi. Creació d'interfícies dinàmiques amb diferents modalitats d'interacció: tàctil, reconeixement de veu i síntesi de veu.

Mobile Subscription Acquisition and Retention Costs - An Actvity-Based Model

The objective of this master’s thesis was to develop a model for mobile subscription acquisition cost, SAC, and mobile subscription retention cost, SRC, by applying activity-based cost accounting principles. The thesis was conducted as a case study for a telecommunication company operating on the Finnish telecommunication market. In addition to activity-based cost accounting there were other theories studied and applied in order to establish a theory framework for this thesis. The concepts of acquisition and retention were explored in a broader context with the concepts of customer satisfaction, loyalty and profitability and eventually customer relationship management to understand the background and meaning of the theme of this thesis. The utilization of SAC and SRC information is discussed through the theories of decision making and activity-based management. Also, the present state and future needs of SAC and SRC information usage at the case company as well as the functions of the company were examined by interviewing some members of the company personnel. With the help of these theories and methods it was aimed at finding out both the theory-based and practical factors which affect the structure of the model. During the thesis study it was confirmed that the existing SAC and SRC model of the case company should be used as the basis in developing the activity-based model. As a result the indirect costs of the old model were transformed into activities and the direct costs were continued to be allocated directly to acquisition of new subscriptions and retention of old subscriptions. The refined model will enable managing the subscription acquisition, retention and the related costs better through the activity information. During the interviews it was found out that the SAC and SRC information is also used in performance measurement and operational and strategic planning. SAC and SRC are not fully absorbed costs and it was concluded that the model serves best as a source of indicative cost information. This thesis does not include calculating costs. Instead, the refined model together with both the theory-based and interview findings concerning the utilization of the information produced by the model will serve as a framework for the possible future development aiming at completing the model.

Sähköurakoitsijan langattoman mobiiliratkaisun sunnittelu ja toteuttaminen

Kandidaatintyön tavoitteena on suunnitella ja toteuttaa tehokkaampi ajanhallintajärjestelmä sähköalan yritykseen. Ajanhallinnan tehostaminen oli tarkoitus saavuttaa siirtämällä työtuntien seuranta paperilomakkeiden käytöstä sähköiseen tietokantaan johon syötetään tiedot langattomilla päätelaitteilla. Päätelaitteiksi valittiin kämmentietokoneet jotka käyttävät tiedonsiirtoon langatonta lähiverkkoa ja yrityksen ulkopuolella GSMkännykkäverkon datasiirto-ominaisuuksia. Ohjelmisto koottiin useista eri sovelluskomponenteista Groupware-ohjelmistopaketin käyttämisen sijaan. Useiden eri sovellusten käyttö osoittautui virheeksi koska näiden erilaiset käyttöliittymät ja vaihtelevat ominaisuudet hankaloittivat käyttöä. Työn tehokkuutta mitattaessa havaittiin että järjestelmän käyttöönotto oli lisännyt ajanhallintaan liittyvien tehtävien pituutta eikä tehostanut niitä. Tämä johtuu osittain useiden eri sovellusten käytöstä ja niiden ominaisuuksien puutteista.

Error Modeling and Accuracy Analysis of a Novel Mobile Hybrid Parallel Robot

Over the last decades, calibration techniques have been widely used to improve the accuracy of robots and machine tools since they only involve software modification instead of changing the design and manufacture of the hardware. Traditionally, there are four steps are required for a calibration, i.e. error modeling, measurement, parameter identification and compensation. The objective of this thesis is to propose a method for the kinematics analysis and error modeling of a newly developed hybrid redundant robot IWR (Intersector Welding Robot), which possesses ten degrees of freedom (DOF) where 6-DOF in parallel and additional 4-DOF in serial. In this article, the problem of kinematics modeling and error modeling of the proposed IWR robot are discussed. Based on the vector arithmetic method, the kinematics model and the sensitivity model of the end-effector subject to the structure parameters is derived and analyzed. The relations between the pose (position and orientation) accuracy and manufacturing tolerances, actuation errors, and connection errors are formulated. Computer simulation is performed to examine the validity and effectiveness of the proposed method.

Cost Optimisation of Mobile Advertising Client Data Transfer

Data traffic caused by mobile advertising client software when it is communicating with the network server can be a pain point for many application developers who are considering advertising-funded application distribution, since the cost of the data transfer might scare their users away from using the applications. For the thesis project, a simulation environment was built to mimic the real client-server solution for measuring the data transfer over varying types of connections with different usage scenarios. For optimising data transfer, a few general-purpose compressors and XML-specific compressors were tried for compressing the XML data, and a few protocol optimisations were implemented. For optimising the cost, cache usage was improved and pre-loading was enhanced to use free connections to load the data. The data traffic structure and the various optimisations were analysed, and it was found that the cache usage and pre-loading should be enhanced and that the protocol should be changed, with report aggregation and compression using WBXML or gzip.

Aplicações de QCM, EIS e SPR na investigação de superfícies e interfaces para o desenvolvimento de (bio)sensores

The use of the quartz crystal microbalance process, electrochemical impedance spectroscopy and surface plasmon resonance for characterizing thin films and monitoring interfaces is presented. The theorical aspects of QCM, EIS and SPR are introduced and the main application areas are outlined. Future prospects of the combined applications of QCM, EIS and SPR methods in the studies of interfacial processes at surfaces are also discussed.

Towards a lightweight adaptative multicomponential affective recognition system

As part of the Affective Computing research field, the development of automatic affective recognition systems can enhance human-computer interactions by allowing the creation of interfaces that react to the user's emotional state. To that end, this Master Thesis brings affect recognition to nowadays most used human computer interface, mobile devices, by developing a facial expression recognition system able to perform detection under the difficult conditions of viewing angle and illumination that entails the interaction with a mobile device. Moreover, this Master Thesis proposes to combine emotional features detected from expression with contextual information of the current situation, to infer a complex and extensive emotional state of the user. Thus, a cognitive computational model of emotion is defined that provides a multicomponential affective state of the user through the integration of the detected emotional features into appraisal processes. In order to account for individual differences in the emotional experience, these processes can be adapted to the culture and personality of the user.

Interfaces e organização da pesquisa no Brasil: da Química à Nanotecnologia

Nanotechnology can be viewed as a powerful tool, capable of shaping the chemistry of atoms and molecules, converting them into exciting nanosized and nanostructured materials, devices and machines. However, in pursuing this task, an exceptional ability is required to deal with complex inter- and multidisciplinary approaches, as imposed by the nanoscale. A new research organization framework, capable of promoting cooperative interactions in many complementary areas, including the industries, is demanded. In this sense, an interesting example are the nanotechnology networks and millenium institutes recently created in Brazil. The highlights and weakness of such cooperative research networks are discussed, in addition to relevant nanotechnology themes focusing on the special needs and resources from the developing nations.