Proposta de conector para ensaios de ligações CDE submetidas à tração perpendicular as fibras em madeira de pinus

The growth of urban population associated with the shortage of supply of public infrastructure such as hospitals, kindergartens, schools, among others, has reinforced the need to develop alternative methods that simplify the construction processes and allows for a reduction in these costs works. The conventional processes have increasingly been shown ineffective to solve the problem of demand for different types of urban and rural buildings. Given this fact, industrial construction processes can gain space and have proven to be highly interesting to solve the above problems, in particular, considering the cost-effective and time. Therefore, this study aimed to determine the influence of moisture on the strength of metal plate connections connectors (printed plate with teeth). For the sizing of the links between structural lumber using metal connectors with teeth prints; controlled process variables (drying of the wood and the different moisture contents), and finally found results and compare them with different literatures order to obtain a qualitative efficiency of the process. Some specimens had very low expectations, can be explained by the presence of bone marrow, and pre-existing cracks. Thus, the results were discarded for further analysis and more accurate results

Fibras naturais: características químicas e potenciais aplicações

This study has as objective determining the chemical properties that serve as the basis for potential scientific and technological applications of seven species of fibrous plants cultivated in Brazil, which are: Banana” (Musa spp.), “Coco” (Cocos nucifera), Curauá (Ananas erectifolius), Fique (Furcraea andina), Piteira” (Furcraea gigantea), Sisal(Agave sisalana) and “Taboa” (Typha domingensis). The tests for determining the percent dry completely, extractives soluble in cold water, in hot water, in sodium hydroxide 1% and in ethanol-toluene, and the percentages of ash, hydrophobicity, lignin, holocellulose and cellulose were performed at the Department of Environmental Sciences, Agronomy College (FCA) of UNESP – Botucatu, São Paulo State. It also presents a literature review about these fibers and their potential applications. Differences between the results obtained and those found by other authors are possibly explained by variations on the origin of plant material, the harvest season, the climate and soil where they were grown. However, the results and the methodology used, serve as a basis for further studies with natural fibers

Reciclagem de poliestireno expandido: compósito com fibras de algodão para a confecção de placas de circuito impresso

In this work polymeric composites reinforced with cotton fibers, from the textile industry, were developed in order to manufacture printed circuit boards. It was used expanded polystyrene (EPS) as a thermoplastic matrix by melting it. For the obtention of 10% and 15% of fiber volume fraction in cotton fibers composites, it was used wasted cotton fibers as an incentive of recycling and reusing of the domestic and industrial wastes as well as for Expanded Polystyrene(EPS). The mechanical properties of the composites were evaluated by tensile and flexural strength from standardized test methods. Composites were characterized by a Scanning Electron Microscopy (SEM), Thermogravimetry (TG/DTG), Differential Scanning Calorimetry (DSC) and dielectric analysis. The analysis of the results showed that fiber in the composite directly influenced in the thermal and mechanical properties

Reciclagem de poliestireno expandido: compósito com fibras de sisal para confecção de placas de circuito impresso

In this work polystyrene composites reinforced with recycled sisal fibers were processed, in order to apply in the manufacture of printed circuit boards. A thermoplastic matrix of recycled polystyrene was used, this material came from waste expanded polystyrene (EPS) used in appliance's packages. Composites were prepared with 15% and 25% of sisal fibers. To obtain the composites, wasted EPS and natural sisal fibers were chosen, to encourage recycling and reuse of household waste and also the use of renewable resources. The composites were analyzed by standard tensile and flexural test, in order to verify the mechanical properties of the material. The characterization of the composite was done by scanning electron microscopy (SEM) , thermogravimetry (TGA / DTG) , differential scanning calorimetry (DSC) and dielectric analysis . The analysis of the results showed that the percentage of fibers in the composite influences directly the thermal and mechanical properties. Plates with a lower percentage of fibers showed superior properties at a higher percentage. The composite material obtained is easy to process and it's use is feasible for the confection of printed circuit boards, considering it's mechanical, thermal and insulative properties

Análise da influência da concentração de feixeis de fibras de bambu em ensaios de piso

Bamboo has one of the highest growth rates among plants, however, its lignifications (which confers resistance) takes around a few years and, therefore, certain physical characteristics and mechanical, that depend on this process will only be acquired between the three to six years old. In addition, bamboo also has significant density variations in different parts of the stem, both in the radial direction as the axial. In particular the radial direction, where the density found in the inner and outer (near the bark) of a single stem can range on average from 0.5 to 0.9 g/cm3. Thus, the application of bamboo as a floor, there to examine whether both sides of the bamboo (internal and external), provide resistance properties required for that purpose. In this study sought to characterize and quantify the influence of the concentration of fiber bundles in the inner and outer sides of rules or bamboo strips of bamboo flooring through testing service. Analyses performed were based on ASTM D 2394- 83 for wooden floors and derivatives. This was necessary because of the absence of a specific prohibition of the use and testing of floors made of bamboo and its products. The data were analyzed by ball indentation test shooting, test for resistance to abrasion, indentation test for stress / load treadmill test and by indentation loads applied to small areas - test the jump. The results of the tests were extremely friendly bamboo, even this presents considerable differences between the resistances obtained from assay of the cover of the inner and outer face, being comparable with those of many commonly used to manufacture wood flooring. This comparison was made possible by information from technical trials of several floors made with wood

Estudo da superfície de fibras de carbono após tratamento de implantação iônica por imersão em plasma (3IP)

In this work, plasma immersion ion implantation (PIII) treatments of carbon fibers (CFs) were performed in order to induce modifications of chemical and physical properties of the CF surface aimed to improve the performance of thermoplastic composite. The samples to be treated were immersed in nitrogen or air glow discharge plasma and pulsed at −3.0 kV for 2.0, 5.0, 10.0, and 15.0 min. After PIII processing, the specimens were characterized by atomic force microscopy (AFM), scanning electron microscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). After CFs treatments, the CF/Polypropylene (PP) composites were produced by hot pressing method. Surface morphology of as-received CFs exhibited some scratches aligned along the fibers due to the fiber manufacturing process. After both treatments, these features became deeper, and also, a number of small particles nonuniformly distributed on the fiber surface can be observed. These particles are product of CF surface sputtering during the PIII treatment, which removes the epoxy layer that covers as-received samples. AFM analyses of CF samples treated with nitrogen depicted a large increase of the surface roughness (Rrms value approximately six times higher than that of the untreated sample). The increase of the roughness was also observed for samples treated by air PIII. Raman spectra of all samples presented the characteristic D- and G-bands at approximately 1355 and 1582 cm−1, respectively. Analysis of the surface chemical composition provided by the XPS showed that nitrogen and oxygen were incorporated onto the surface. The polar radicals formed on the surface lead to increasing of the CF surface energy. Both the modification of surface roughness and the surface oxidation contributed for the enhancement of CF adhesion to the polymeric matrix. These features were confirmed ... (Complete abstract click electronic access below)

Avaliação dos efeitos ambientais nas propriedades do compósito de poliamida 6,6/fibras de carbono

This graduation work done study of polyamide 6.6/composite carbon fibres, since its processing, characterization of the main properties. Besides the influence of temperature, UV radiation, salt spray and moisture on the mechanical and viscoelastic behavior. To achieve this goal, the first composite was processed from the heat compression molding using known variables of the process and using the empirical method to find the best value for other parameters. The method processing molding was chosen because it common in composites processing in order to evaluate the influence of crystallinity of the properties that influence the mechanical and viscoelastic behavior laminates. From the obtained laminate specimens were evaluated in weathering, such as: in hygrothermal chamber, UV, salt spray and thermal shock. In another step, the effect produced by these constraints were evaluated by optical microscopy, ultrasound, dynamic mechanical analysis and vibration tests. This project was conducted at the Department of Technology and Materials of UNESP in Guaratingueta, where all the equipment and techniques for the implementation of this project met available. After the tests proved the applicability of the composite polyamide 6.6/carbon fibers in aeronautical applications with resistance the main climatic influences

Incorporação da apatita na superfície da liga Ti30ta empregando tratamento alcalino associado à eletrofiação de fibras de PCL

Pós-graduação em Engenharia Mecânica - FEG

Estudo da modificação superficial de fibras de carbono por meio de tratamentos a plasma para o aumento da adesão na interface de compósitos fibra de carbono/PPS

Pós-graduação em Engenharia Mecânica - FEG

Fibras alimentares: efeito na farinha, reologia das massas, qualidade e taxa de envelhecimento de pães

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Otimização do processo de soldagem por resistência elétrica em compósitos PEI/fibras contínuas para aplicações aeronáuticas

Pós-graduação em Engenharia Mecânica - FEG

Avaliação dos parâmetros tempo, corrente e pressão na soldagem por resistência elétrica de compósitos PEI/fibras contínuas: influência na resistência mecânica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Eletrofiação de fibras de borracha natural com adição de polianilina

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito das fibras alimentares como substitutos de gordura em hambúrguer de carne bovina e paio

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeitos do treinamento aeróbio e de força sobre a área de secção transversal (AST) das fibras do músculo plantar de ratos

Recent research seeking to elucidate the possible effects of different types of physical training on the morphological adaptations of skeletal muscle. Although it is relatively easy to study the effects of exercise training in humans, such research becomes limited due to the invasive nature of the biopsies and the risk inherent in the use of human subjects. Thus, the application of animal models of training has been considered an appropriate strategy for the study of muscular adaptations in response to exercise. Objective: This study used a rodent model to determine the possible effects of aerobic and strength training on the CSA of fibers of the plantaris muscle. Methods: 24 male Wistar rats (80 to 120 days, 250 to 400 g) were randomly divided into 3 groups: aerobic training (TA, n = 8), strength training (ST, n = 8) and control (CO, n = 8). The animals in groups TA and TF were subjected to 8 weeks of training, while the animals of group C remained without any stimulus from start to finish the training period. At the end of the experiment, the animals were sacrificed and right plantar muscles dissected and removed. For morphological and morphometric analysis of muscle fibers was performed staining was performed H.E. Results: There was no significant difference in initial body weight between experimental groups. After 8 weeks of training, the TA group showed a significant reduction in final body weight, compared to CO and TF groups. With respect to the CSA of fibers of the plantaris muscle, no significant difference between the groups CO and TA. On the other hand, the strength training promoted a significant increase in AST of the group TF in compared with the groups CO and TA. Conclusion: Strength training used in this study promoted an increase in CSA of fibers of the plantaris muscle. On the other hand, animals submitted to aerobic training showed no changes in the CSA of the fibers, however, there was reduction in PC animals. The data strongly suggest the use of animal model of strength training used in this study as an appropriate strategy for studying the hypertrophic response of skeletal muscle.