Isolation and Characterization of Ovomucin - a Bioactive Agent of Egg White

The hen’s egg is a source of new life. Therefore, it contains many biologically active compounds. In addition to being a very nutritious food and also commonly used in the food industry due to its many techno-functional properties, the egg can serve as a source of compounds used as nutra-, pharmaand cosmeceuticals. One such interesting compound is ovomucin, an egg white protein responsible for the gel-like properties of thick egg white. Previous studies have indicated that ovomucin and ovomucin-derived peptides have several different bioactive properties. The objectives of the present study were to develop isolation methods for ovomucin, to characterize the structure of ovomucin, to compare various egg fractions as sources of ovomucin, to study the effects of various dissolving methods for ovomucin, and to investigate the bioactive properties of ovomucin and ovomucin-derived peptides. A simple and rapid method for crude ovomucin separation was developed. By using this method crude ovomucin was isolated within hours, compared to the 1-2 days (including a dialysis step) needed when using several other methods. Structural characterization revealed that ovomucin is composed of two subunits, α- and β-ovomucin, as egg white protein formerly called α1-ovomucin seemed to be ovostatin. However, it might be possible that ovostatin is associated within β- and α-ovomucin. This interaction could even have some effect on the physical nature of various egg white layers. Although filtration by-product fraction was a very prominent source of both crude and β-ovomucin, process development has reduced its amount so significantly that it has no practical meaning anymore. Thus, the commercial liquid egg white is probably the best option, especially if it generally contains amounts of β-ovomucin as high as were found in these studies. Crude ovomucin was dissolved both by using physical and enzymic methods. Although sonication was the most effective physical method for ovomucin solubilisation, colloid milling seemed to be a very promising alternative. A milk-like, smooth and opaque crude ovomucin suspension was attained by using a colloid mill. The dissolved ovomucin fractions were further tested for bioactive properties, and it was found that three dissolving methods tested produced moderate antiviral activity against Newcastle disease virus, namely colloid milling, enzymatic hydrolysis and a combination of sonicaton and enzymatic hydrolysis. Moreover, trypsin-digested crude ovomucin was found to have moderate antiviral activity against avian influenza virus: both subtype H5 and H7.

Expression and purification of the immunogenically active fragment B of the Park Williams 8 Corynebacterium diphtheriae strain toxin

The construction of a hexahistidine-tagged version of the B fragment of diphtheria toxin (DTB) represents an important step in the study of the biological properties of DTB because it will permit the production of pure recombinant DTB (rDTB) in less time and with higher yields than currently available. In the present study, the genomic DNA of the Corynebacterium diphtheriae Park Williams 8 (PW8) vaccine strain was used as a template for PCR amplification of the dtb gene. After amplification, the dtb gene was cloned and expressed in competent Escherichia coli M15™ cells using the expression vector pQE-30™. The lysate obtained from transformed E. coli cells containing the rDTB PW8 was clarified by centrifugation and purified by affinity chromatography. The homogeneity of the purified rDTB PW8 was confirmed by immunoblotting using mouse polyclonal anti-diphtheria toxoid antibodies and the immune response induced in animals with rDTB PW8 was evaluated by ELISA and dermonecrotic neutralization assays. The main result of the present study was an alternative and accessible method for the expression and purification of immunogenically reactive rDTB PW8 using commercially available systems. Data also provided preliminary evidence that rabbits immunized with rDTB PW8 are able to mount a neutralizing response against the challenge with toxigenic C. diphtheriae.

Reproducibility of heart rate variability parameters measured in healthy subjects at rest and after a postural change maneuver

Heart rate variability (HRV) provides important information about cardiac autonomic modulation. Since it is a noninvasive and inexpensive method, HRV has been used to evaluate several parameters of cardiovascular health. However, the internal reproducibility of this method has been challenged in some studies. Our aim was to determine the intra-individual reproducibility of HRV parameters in short-term recordings obtained in supine and orthostatic positions. Electrocardiographic (ECG) recordings were obtained from 30 healthy subjects (20-49 years, 14 men) using a digital apparatus (sampling ratio = 250 Hz). ECG was recorded for 10 min in the supine position and for 10 min in the orthostatic position. The procedure was repeated 2-3 h later. Time and frequency domain analyses were performed. Frequency domain included low (LF, 0.04-0.15 Hz) and high frequency (HF, 0.15-0.4 Hz) bands. Power spectral analysis was performed by the autoregressive method and model order was set at 16. Intra-subject agreement was assessed by linear regression analysis, test of difference in variances and limits of agreement. Most HRV measures (pNN50, RMSSD, LF, HF, and LF/HF ratio) were reproducible independent of body position. Better correlation indexes (r > 0.6) were obtained in the orthostatic position. Bland-Altman plots revealed that most values were inside the agreement limits, indicating concordance between measures. Only SDNN and NNv in the supine position were not reproducible. Our results showed reproducibility of HRV parameters when recorded in the same individual with a short time between two exams. The increased sympathetic activity occurring in the orthostatic position probably facilitates reproducibility of the HRV indexes.

Effect of different tumbling marination methods and time on the quality characteristics of prepared pork chops

AbstractThe combined effects of tumbling marination methods (Vacuum continuous tumbling marination, CT; Vacuum intermittent tumbling marination, IT) and effective tumbling time (4, 6, 8 and 10 h) on quality characteristics of prepared boneless pork chops were investigated. The results showed that regardless of tumbling time, CT method significantly increased the pH, product yield, cohesiveness, resilience, sensory tenderness and overall flavor (p<0.05) compared with IT method, and CT method also significantly decreased the pressing loss, cooking loss, shear force value (SFV), hardness and chewiness (p<0.05) compared with IT method. With the effective tumbling time increasing from 4 h to 10 h, the product yield and sensory attributes of prepared pork chops increased at first and then decreased, whereas the pressing loss, cooking loss, SFV, hardness and chewiness decreased at first and then increased. Additionally, an interaction between CT method and effective tumbling time was also observed. These results suggested that CT method of 8 h obtained the best quality characteristics of prepared pork chops, which should be adopted.

Impact of training at ventilatory threshold on cardiopulmonary and functional capacity in overweight patients with chronic kidney disease

INTRODUCTION: Chronic kidney disease (CKD) and obesity are both associated with reduced physical capacity. The potential benefit of aerobic training on physical capacity has been recognized. The exercise intensity can be established using different methods mostly subjective or indirect. Ventilatory threshold (VT) is a direct and objective method that allows prescribing exercise intensity according to individual capacity. OBJECTIVES: To evaluate the impact of aerobic training at VT intensity on cardiopulmonary and functional capacities in CKD patients with excess of body weight. METHODS: Ten CKD patients (eight men, 49.7 ± 10.1 years; BMI 30.4 ± 3.5 kg/m², creatinine clearance 39.4 ± 9.8 mL/min/1.73 m²) underwent training on a treadmill three times per week during 12 weeks. Cardiopulmonary capacity (ergoespirometry), functional capacity and clinical parameters were evaluated. RESULTS: At the end of 12 weeks, VO2PEAK increased by 20%, and the speed at VO2PEAK increased by 16%. The training resulted in improvement in functional capacity tests, such as six-minute walk test (9.2%), two-minute step test (20.3%), arm curl test (16.3%), sit and stand test (35.7%), and time up and go test (15.3%). In addition, a decrease in systolic and diastolic blood pressures was observed despite no change in body weight, sodium intake and antihypertensive medication. CONCLUSION: Aerobic exercise performed at VT intensity improved cardipulmonary and functional capacities of overweight CKD patients. Additional benefit on blood pressure was observed. These results suggest that VT can be effectively applied for prescribing exercise intensity in this particular group of patients.

“Who is steering the ship and which constellation guides the way? Exploring transparency in the European Central Bank during the time of crisis”

This paper explores transparency in the decision-making of the European Central Bank (ECB). According to ECB´s definition, transparency means that the central bank provides the general public with all relevant information on its strategy, assessments and policy decisions as well as its procedures in an open, clear and timely manner. In this paper, however, the interpretation of transparency is somewhat broader: Information is freely available and directly accessible to those who will be affected by the decisions. Moreover, the individuals shall be able to master this material. ECB´s negative attitude towards publication of documents has demonstrated central bank´s reluctance to strive towards more extensive transparency. By virtue of the definition adopted by the ECB the bank itself is responsible for determining what is considered as relevant information. On the grounds of EU treaties, this paper assesses ECB`s accountability concentrating especially on transparency by employing principal-agent theory and constitutional approach. Traditionally, the definite mandate and the tenet of central bank independence have been used to justify the limited accountability. The de facto competence of the ECB has, however, considerably expanded as the central bank has decisively resorted to non-standard measures in order to combat the economic turbulences facing Europe. It is alleged that non-standard monetary policy constitutes a grey zone occasionally resembling economic policy or fiscal policy. Notwithstanding, the European Court of Justice has repeatedly approved these measures. This dynamic interpretation of the treaties seems to allow temporarily exceptions from the central bank´s primary objective during extraordinary times. Regardless, the paper suggests that the accountability nexus defined in the treaties is not sufficient in order to guarantee the accountability of the ECB after the adoption of the new, more active role. Enhanced transparency would help the ECB to maintain its credibility. Investing in the quality of monetary dialogue between the Parliament and the ECB appears to constitute the most adequate and practicable method to accomplish this intention. As a result of upgraded transparency the legitimacy of the central bank would not solely rest on its policy outputs.

THE ADAPTATION PROCESS AND CHALLENGES OF EDUCATION EXPORT

The purpose of this study is to investigate the challenges of the adaptation process of education export. The research is conducted as a single case study that concentrates on three education export projects. The case company in the research is Team Academy. The study goes through the different forms of education export, the adaptation of education export and the challenges of the education export –process by means of theory and empirical data. The research is carried out as a qualitative research and the method used is a qualitative content analysis. More specifically the research is an abductive content analysis. The research data is collected in four in-depth interviews from Team academy representatives who have been strongly involved in certain education export –project of Team Academy. The research confirms the theory in the challenge of hierarchy, funding and registration issues, and refutes it in the challenge of competition, legislation, different governmental attitudes and knowledge in productization. The main challenges of the adaptation process are related to funding, differences in values, sudden changes, the complex nature of the learning model, concept of time, teamwork as method and accreditation. It is highlighted that in the future operations, anticipating problems that arise from for example cultural differences and differences in values, communication, managing the money flows and the company form is recommended. Future research could continue with investigating the suitable company form for education exports of this kind, and how to stand out and communicate when operating under another institution. It is considered a potential risk that a brand encloses the brand that operates under it.

Prevalence of overweight and obesity in children from urban and rural Niagara

Purpose: The influence of environment in the development of overweight and obesity is an ongoing concern. This investigation examined the influence of urbanization on the rates of childhood overweight and obesity. Method: 2167 (1090M, 1077F) grade four children from 75 schools in Ontario's Niagara Region were sampled. A sophisticated algorithm overlaying electoral boundaries, population densities, and the knowledge of community members was used to classify schools into one of three location categories: urban {N= 1588), urban fringe {N= 379), and rural (A^= 234). Each subject was measured for: height, weight, and aerobic performance (Leger). Physical activity was evaluated with the self-report Participation Questionnaire (free-time and organized sport activities), and teacher's evaluations of student activity. Overweight (overweight and obesity combined) was measured both as a continuous (BMI) and categorical variable (BMI category), to evaluate the prevalence by location. A multivariate analysis was used to test for a suppression effect. Results: BMI and BMI category did not differ significantly by location or gender, and no evidence of a gender interaction existed. According to both a linear and logistic regression, physical activity or fitness levels did not suppress the influence of location on BMI and BMI category. Age, gender, free-time activity, organized sports, fitness level, and number of siblings, were all found to significantly influence overweight. Conclusions: It is plausible that the prevalence of overweight does not differ in urban and rural children from the Niagara Region. Further investigation is recommended, examining subjects by individual location of residence, in multiple regions throughout Ontario.

Hyperspectral Mineral Identification using SVM and SOM

Remote sensing techniques involving hyperspectral imagery have applications in a number of sciences that study some aspects of the surface of the planet. The analysis of hyperspectral images is complex because of the large amount of information involved and the noise within that data. Investigating images with regard to identify minerals, rocks, vegetation and other materials is an application of hyperspectral remote sensing in the earth sciences. This thesis evaluates the performance of two classification and clustering techniques on hyperspectral images for mineral identification. Support Vector Machines (SVM) and Self-Organizing Maps (SOM) are applied as classification and clustering techniques, respectively. Principal Component Analysis (PCA) is used to prepare the data to be analyzed. The purpose of using PCA is to reduce the amount of data that needs to be processed by identifying the most important components within the data. A well-studied dataset from Cuprite, Nevada and a dataset of more complex data from Baffin Island were used to assess the performance of these techniques. The main goal of this research study is to evaluate the advantage of training a classifier based on a small amount of data compared to an unsupervised method. Determining the effect of feature extraction on the accuracy of the clustering and classification method is another goal of this research. This thesis concludes that using PCA increases the learning accuracy, and especially so in classification. SVM classifies Cuprite data with a high precision and the SOM challenges SVM on datasets with high level of noise (like Baffin Island).

Models and algorithms for the capacitated location-routing problem

Le problème de localisation-routage avec capacités (PLRC) apparaît comme un problème clé dans la conception de réseaux de distribution de marchandises. Il généralisele problème de localisation avec capacités (PLC) ainsi que le problème de tournées de véhicules à multiples dépôts (PTVMD), le premier en ajoutant des décisions liées au routage et le deuxième en ajoutant des décisions liées à la localisation des dépôts. Dans cette thèse on dévelope des outils pour résoudre le PLRC à l’aide de la programmation mathématique. Dans le chapitre 3, on introduit trois nouveaux modèles pour le PLRC basés sur des flots de véhicules et des flots de commodités, et on montre comment ceux-ci dominent, en termes de la qualité de la borne inférieure, la formulation originale à deux indices [19]. Des nouvelles inégalités valides ont été dévelopées et ajoutées aux modèles, de même que des inégalités connues. De nouveaux algorithmes de séparation ont aussi été dévelopés qui dans la plupart de cas généralisent ceux trouvés dans la litterature. Les résultats numériques montrent que ces modèles de flot sont en fait utiles pour résoudre des instances de petite à moyenne taille. Dans le chapitre 4, on présente une nouvelle méthode de génération de colonnes basée sur une formulation de partition d’ensemble. Le sous-problème consiste en un problème de plus court chemin avec capacités (PCCC). En particulier, on utilise une relaxation de ce problème dans laquelle il est possible de produire des routes avec des cycles de longueur trois ou plus. Ceci est complété par des nouvelles coupes qui permettent de réduire encore davantage le saut d’intégralité en même temps que de défavoriser l’apparition de cycles dans les routes. Ces résultats suggèrent que cette méthode fournit la meilleure méthode exacte pour le PLRC. Dans le chapitre 5, on introduit une nouvelle méthode heuristique pour le PLRC. Premièrement, on démarre une méthode randomisée de type GRASP pour trouver un premier ensemble de solutions de bonne qualité. Les solutions de cet ensemble sont alors combinées de façon à les améliorer. Finalement, on démarre une méthode de type détruir et réparer basée sur la résolution d’un nouveau modèle de localisation et réaffectation qui généralise le problème de réaffectaction [48].

Synthesis of new zirconium diketiminate complexes and catalytic applications

Résumé: Dans le but de préparer des complexes de Zr pour la catalyse homogène de la polymérisation des lactides et de l’hydroamination des olefines, l’elaboration et l’optimisation d’une méthode systématique et efficace de synthèse des ligands dikétimines ayant différents substituants alkyles (R) à la position N,N’ a été realisée. Des dikétimines (nacnacRH) symétriques ont été obtenus avec une pureté de plus de 95 % et un rendement de 65 % lorsque R = Me et des rendements allant de 80 à 95 % lorsque le groupe R = n-Pr, i-Pr, i-Bu, Bu, Cy et (+)-CH(Me)Ph. La synthèse des dikétimines ayant des substituants N-alkyls différents, dite asymétriques, donne toujours un mélange statistique de trois ligands: nacnacR,R’H, nacnacR,RH et nacnacR’,R’H qui n’ont pu être separés. Seuls les dikétimines asymétriques avec un substituant N-alkyl et un autre N-aryl (nacnacR,ArH) ont été obtenus avec des rendements plus élevés que celui du mélange statistique. Par la suite, la complexation de ces ligands bidentés au Zr, la caractérisation de ces complexes et l’investigation de la réactivité ont été étudiés. Les complexes de Zr de type (nacnacR)2ZrCl2 ont été obtenus par deux voies de synthèse principales: la première consiste à traiter le sel de lithium du ligand avec le ZrCl4. La seconde est la réaction du ligand avec les complexes neutres d’alkyl-zirconium(IV) par protonation de l'alkyle coordonné. En solution, les complexes obtenus de (nacnacR)2ZrX2 possèdent un comportement dynamique via un « Bailar-twist » et les paramètres d'activation de cette isomérisation ont été calculés. Le complexe octaèdrique (nacnacBn)2ZrCl2 n'est pas réactif dans la carbozirconation et son alkylation n'était pas possible par l’échange des chlorures avec les alkyles. L’analogue diméthylé (nacnacBn)2ZrMe2 peut être préparé par alkylation du ZrCl4 avant la complexation du ligand. On a également observé que ce dernier n’est pas réactif dans la carbozirconation. L‘analogue diéthoxyde (nacnacBn)2Zr(OEt)2 est obtenu par échange des diméthyles avec les éthoxydes. La polymérisation du lactide avec celui-ci en tant que précurseur est relativement lente et ne peut être effectuée que dans le monomère fondu. Par conséquent, pour résoudre les problèmes rencontrés avec les complexes de zirconium (dikétiminates non-pontés), un ligand dikétimines pontés par le diaminocyclohexane, (±)-C6H10(nacnacXylH)2, LH2, (Xyl = 2,6-diméthylphényle) a été préparé. La complexation de ce ligand tetradenté au metal a été réalisée par deux voies de synthèse; la première est la réaction du sel de lithium de ce ligand avec le ZrCl4(THF)2. La deuxième est la déprotonation du ligand neutre avec le Zr(NMe2)4 et l’élimination du diméthylamine. Des complexes du type: (±)-C6H10(nacnacXylH)2ZrX2 avec X = Cl, NMe2 ont été obtenus. Les ligands de chlorure sont dans ce cas facilement remplaçables par des éthoxydes ou des méthyles. On a observé l’activité la plus élevée jamais observée pour un complexe d’un métal du groupe 4 avec le complexe de (±)-C6H10(nacnacXylH)2Zr(OEt)2 dans la polymérisation de lactide. L'étude cinétique a montré que la loi de vitesse est du premier ordre en catalyseur et en monomère et la constante de vitesse est k = 14 (1) L mol-1 s-1. L'analyse des polymères a montré l’obtention de masses moléculaires faibles et l’abscence de stéréocontrôle. La réaction de (±)-C6H10(nacnacXylH)2ZrCl2 avec le triflate d’argent donne le (±)-C6H10(nacnacXylH)2Zr(OTf)2. Le complexe bis-triflate obtenu possède une activité catalytique elevée pour les additions du type aza-Michael. L’utilisation du R,R-C6H10(nacnacXylH)2Zr(OTf)2 énantiopur comme catalyseur, dans les additions du type aza-Michael asymétriques donne le produit desiré avec un excès énantiomérique de 19%.

L'algorithme de Branch and Price and Cut pour le problème de conception de réseaux avec coûts fixes et sans capacité

Le problème de conception de réseaux est un problème qui a été beaucoup étudié dans le domaine de la recherche opérationnelle pour ses caractéristiques, et ses applications dans des nombreux domaines tels que le transport, les communications, et la logistique. Nous nous intéressons en particulier dans ce mémoire à résoudre le problème de conception de réseaux avec coûts fixes et sans capacité, en satisfaisant les demandes de tous les produits tout en minimisant la somme des coûts de transport de ces produits et des coûts fixes de conception du réseau. Ce problème se modélise généralement sous la forme d’un programme linéaire en nombres entiers incluant des variables continues. Pour le résoudre, nous avons appliqué la méthode exacte de Branch-and-Bound basée sur une relaxation linéaire du problème avec un critère d’arrêt, tout en exploitant les méthodes de génération de colonnes et de génération de coupes. Nous avons testé la méthode de Branch-and-Price-and-Cut sur 156 instances divisées en cinq groupes de différentes tailles, et nous l’avons comparée à Cplex, l’un des meilleurs solveurs d’optimisation mathématique, ainsi qu’à la méthode de Branch-and- Cut. Notre méthode est compétitive et plus performante sur les instances de grande taille ayant un grand nombre de produits.

Growth and Characterisation of Radio Frequency Magnetron Sputttered Indium Tin Oxide Thin Films

The increasing interest in the interaction of light with electricity and electronically active materials made the materials and techniques for producing semitransparent electrically conducting films particularly attractive. Transparent conductors have found major applications in a number of electronic and optoelectronic devices including resistors, transparent heating elements, antistatic and electromagnetic shield coatings, transparent electrode for solar cells, antireflection coatings, heat reflecting mirrors in glass windows and many other. Tin doped indium oxide (indium tin oxide or ITO) is one of the most commonly used transparent conducting oxides. At present and likely well into the future this material offers best available performance in terms of conductivity and transmittivity combined with excellent environmental stability, reproducibility and good surface morphology. Although partial transparency, with a reduction in conductivity, can be obtained for very thin metallic films, high transparency and simultaneously high conductivity cannot be attained in intrinsic stoichiometric materials. The only way this can be achieved is by creating electron degeneracy in a wide bandgap (Eg > 3eV or more for visible radiation) material by controllably introducing non-stoichiometry and/or appropriate dopants. These conditions can be conveniently met for ITO as well as a number of other materials like Zinc oxide, Cadmium oxide etc. ITO shows interesting and technologically important combination of properties viz high luminous transmittance, high IR reflectance, good electrical conductivity, excellent substrate adherence and chemical inertness. ITO is a key part of solar cells, window coatings, energy efficient buildings, and flat panel displays. In solar cells, ITO can be the transparent, conducting top layer that lets light into the cell to shine the junction and lets electricity flow out. Improving the ITO layer can help improve the solar cell efficiency. A transparent ii conducting oxide is a material with high transparency in a derived part of the spectrum and high electrical conductivity. Beyond these key properties of transparent conducting oxides (TCOs), ITO has a number of other key characteristics. The structure of ITO can be amorphous, crystalline, or mixed, depending on the deposition temperature and atmosphere. The electro-optical properties are a function of the crystallinity of the material. In general, ITO deposited at room temperature is amorphous, and ITO deposited at higher temperatures is crystalline. Depositing at high temperatures is more expensive than at room temperature, and this method may not be compatible with the underlying devices. The main objective of this thesis work is to optimise the growth conditions of Indium tin oxide thin films at low processing temperatures. The films are prepared by radio frequency magnetron sputtering under various deposition conditions. The films are also deposited on to flexible substrates by employing bias sputtering technique. The films thus grown were characterised using different tools. A powder x-ray diffractometer was used to analyse the crystalline nature of the films. The energy dispersive x-ray analysis (EDX) and scanning electron microscopy (SEM) were used for evaluating the composition and morphology of the films. Optical properties were investigated using the UVVIS- NIR spectrophotometer by recording the transmission/absorption spectra. The electrical properties were studied using vander Pauw four probe technique. The plasma generated during the sputtering of the ITO target was analysed using Langmuir probe and optical emission spectral studies.

ANALYSIS, MODIFICATION, AND EVALUATION OF THE COLD FLOW PROPERTIES OF VEGETABLE OILS AS BASE OIL FOR INDUSTRIAL LUBRICANTS

Poor cold flow properties of vegetable oils are a major problem preventing the usage of many abundantly available vegetable oils as base stocks for industrial lubricants. The major objective of this research is to improve the cold flow properties of vegetable oils by various techniques like additive addition and different chemical modification processes. Conventional procedure for determining pour point is ASTM D97 method. ASTM D97 method is time consuming and reproducibility of pour point temperatures is poor between laboratories. Differential Scanning Calorimetry (DSC) is a fast, accurate and reproducible method to analyze the thermal activities during cooling/heating of oil. In this work coconut oil has been chosen as representative vegetable oil for the analysis and improvement cold flow properties since it is abundantly available in the tropics and has a very high pour point of 24 °C. DSC is used for the analysis of unmodified and modified vegetable oil. The modified oils (with acceptable pour points) were then subjected to different tests for the valuation of important lubricant properties such as viscometric, tribological (friction and wear properties), oxidative and corrosion properties.A commercial polymethacrylate based PPD was added in different percentages and the pour points were determined in each case. Styrenated phenol(SP) was added in different concentration to coconut oil and each solution was subjected to ASTM D97 test and analysis by DSC. Refined coconut oil and other oils like castor oil, sunflower oil and keranja oil were mixed in different proportions and interesterification procedure was carried out. Interesterification of coconut oil with other vegetable oils was not found to be effective in lowering the pour point of coconut oil as the reduction attained was only to the extent of 2 to 3 °C.Chemical modification by acid catalysed condensation reaction with coconut oil castor oil mixture resulted in significant reduction of pour point (from 24 ºC to -3 ºC). Instead of using triacylglycerols, when their fatty acid derivatives (lauric acid- the major fatty acid content of coconut oil and oleic acid- the major fatty acid constituents of monoand poly- unsaturated vegetable oils like olive oil, sunflower oil etc.) were used for the synthesis , the pour point could be brought down to -42 ºC. FTIR and NMR spectroscopy confirmed the ester structure of the product which is fundamental to the biodegradability of vegetable oils. The tribological performance of the synthesised product with a suitable AW/EP additive was comparable to the commercial SAE20W30 oil. The viscometric properties (viscosity and viscosity index) were also (with out additives) comparable to commercial lubricants. The TGA experiment confirmed the better oxidative performance of the product compared to vegetable oils. The sample passed corrosion test as per ASTM D130 method.

A Study on the Water Retention Characteristics of Soils and their Improvements

Soil moisture plays a cardinal role in sustaining eclological balance and agricultural development – virtually the very existence of life on earth. Because of the growing shortage of water resources, we have to use the available water most efficiently by proper management. Better utilization of rainfall or irrigation management depends largely on the water retention characteristics of the soil.Soil water retention is essential to life and it provides an ongoing supply of water to plants between periods of irrigation so as to allow their continued growth and survival.It is essential to maintain readily available water in the soil if crops are to sustain satisfactory growth. The plant growth may be retarded if the soil moisture is either deficient or excessive. The optimum moisture content is that moisture which leads to optimum growth of plant. When watering is done, the amount of water supplied should be such that the water content is equal to the field capacity that is the water remained in the saturated soil after gravitational drainage. Water will gradually be utilized consumptively by plants after the water application, and the soil moisture will start falling. When the water content in the soil reaches the value known as permanent wilting point (when the plant starts wilting) fresh dose of irrigation may be done so that water content is again raised to the field capacity of soil.Soil differ themselves in some or all the properties depending on the difference in the geotechnical and environmental factors. Soils serve as a reservoir of the nutrients and water required for crops.Study of soil and its water holding capacity is essential for the efficient utilization of irrigation water. Hence the identification of the geotechnical parameters which influence the water retention capacity, chemical properties which influence the nutrients and the method to improve these properties have vital importance in irrigation / agricultural engineering. An attempt in this direction has been made in this study by conducting the required tests on different types of soil samples collected from various locations in Trivandrum district Kerala, with and without admixtures like coir pith, coir pith compost and vermi compost. Evaluation of the results are presented and a design procedure has been proposed for a better irrigation scheduling and management.