Sources of variability in the free-ball micro-scale abrasion test

In the 'free-ball' version of the micro-scale abrasion or ball-cratering test the rotating ball rests against a tilted sample and a grooved drive shaft. Tests under nominally identical conditions with different apparatus commonly show small but significant differences in measured wear rate. An indirect method has been developed and demonstrated for continuous on-line measurement of the coefficient of friction in the free-ball test. Experimental investigation of the effects of sample tilt angle and drive shaft groove width shows that both these factors influence the stability of the rotation of the ball, and the shape of the abrasive slurry pool, which in turn affect the coefficient of friction in the wear scar area and the measured wear rate. It is suggested that in order to improve the reproducibility of this method the geometry of the apparatus should be specified. For the apparatus used in this work with a steel ball of 25 mm diameter, a sample tilt angle of 60-75° and a shaft groove width of about 10mm provided the most stable ball motion and a wear rate which showed least variability. © 2004 Elsevier B.V. All rights reserved.

Variability in spawning frequency and reproductive development of the narrow-barred Spanish mackerel (Scomberomorus commerson) along the west coast of Australia

The narrow-barred Spanish mackerel (Scomberomorus commerson) is widespread throughout the Indo-West Pacific region. This study describes the reproductive biology of S. commerson along the west coast of Australia, where it is targeted for food consumption and sports fishing. Development of testes occurred at a smaller body size than for ovaries, and more than 90% of males were sexually mature by the minimum legal length of 900 mm TL compared to 50% of females. Females dominated overall catches although sex ratios within daily catches vary considerably and females were rarely caught when spaw n ing. Scomberomorus commerson are seasonally abundant in coastal waters and most of the commercial catch is taken prior to the reproductive season. Spawning occurs between about August and November in the Kimberley region and between October and January in the Pilbara region. No spawning activity was recorded in the more southerly West Coast region, and only in the north Kimberley region were large numbers of fish with spawning gonads collected. Catches dropped to a minimum when spawning began in the Pilbara region, when fish became less abundant in inshore waters and inclement weather conditions limited fishing on still productive offshore reefs. Final maturation and ovulation of oocytes took place within a 24-hour period, and females spawned in the afternoon-evening every three days. A third of these spawning females released batches of eggs on consecutive days. Relationships between length, weight, and batch fecundity are presented.

Maximum likelihood estimation of mortality and growth with individual variability from multiple length-frequency data

We consider estimation of mortality rates and growth parameters from length-frequency data of a fish stock and derive the underlying length distribution of the population and the catch when there is individual variability in the von Bertalanffy growth parameter L∞. The model is flexible enough to accommodate 1) any recruitment pattern as a function of both time and length, 2) length-specific selectivity, and 3) varying fishing effort over time. The maximum likelihood method gives consistent estimates, provided the underlying distribution for individual variation in growth is correctly specified. Simulation results indicate that our method is reasonably robust to violations in the assumptions. The method is applied to tiger prawn data (Penaeus semisulcatus) to obtain estimates of natural and fishing mortality.

Age validation, growth modeling, and mortality estimates for striped trumpeter (Latris lineata) from southeastern Australia: making the most of patchy data

Age estimates for striped trumpeter (Latris lineata) from Tasmanian waters were produced by counting annuli on the transverse section of sagittal otoliths and were validated by comparison of growth with known-age individuals and modal progression of a strong recruitment pulse. Estimated ages ranged from one to 43 years; fast growth rates were observed for the first five years. Minimal sexual dimorphism was shown to exist between length, weight, and growth characteristics of striped trumpeter. Seasonal growth variability was strong in individuals up to at least age four, and growth rates peaked approximately one month after the observed peak in sea surface temperature. A modified two-phase von Bertalanffy growth function was fitted to the length-at-age data, and the transition between growth phases was linked to apparent changes in physiological and life history traits, including offshore movement as fish approach maturity. The two-phase curve was found to represent the mean length at age in the data better than the standard von Bertalanffy growth function. Total mortality was estimated by using catch curve analysis based on the standard and two-phase von Bertalanffy growth functions, and estimates of natural mortality were calculated by using two empirical models, one based on longevity and the other based on the parameters L∞ and k from both growth functions. The interactions between an inshore gillnet fishery targeting predominately juveniles and an offshore hook fishery targeting predominately adults highlight the need to use a precautionary approach when developing harvest strategies.

Transboundary Movement of Atlantic Istiophorid Billfishes Among International and U.S. Domestic Management Areas Inferred from Mark-Recapture Studies

Billfish movements relative to the International Commission for the Conservation of Atlantic Tunas management areas, as well as U.S. domestic data collection areas within the western North Atlantic basin, were investigated with mark-recapture data from 769 blue marlin, Makaira nigricans, 961 white marlin, Tetrapturus albidus, and 1,801 sailfish, Istiophorus platypterus. Linear displacement between release and recapture locations ranged from zero (all species) to 15,744 km (mean 575, median 119, SE 44) for blue marlin, 6,523 km (mean 719, median 216, SE 33) for white marlin, and 3,845 km (mean 294, median 98, SE 13) for sailfish. In total, 2,824 (80.0%) billfish were recaptured in the same management area of release. Days at liberty ranged from zero (all species) to 4,591 (mean 619, median 409, SE 24) for blue marlin, 5,488 (mean 692, median 448, SE 22) for white marlin, and 6,568 (mean 404, median 320, SE 11) for sailfish. The proportions (per species) of visits were highest in the Caribbean area for blue marlin and white marlin, and the Florida East Coast area for sailfish. Blue marlin and sailfish were nearly identical when comparing the percent of individuals vs. the number of areas visited. Overall, white marlin visited more areas than either blue marlin or sailfish. Seasonality was evident for all species, with overall results generally reflecting the efforts of the catch and release recreational fishing sector, particularly in the western North Atlantic. This information may be practical in reducing the uncertainties in billfish stock assessments and may offer valuable insight into management consideration of time-area closure regulations to reduce bycatch mortality of Atlantic billfishes.

Avaliação dos parâmetros de compressibilidade da camada de argila mole da Baixada de Jacarepaguá, após longo período de sobrecarga de aterro.

Foram realizados ensaios de adensamento, SIC e CRS, em amostras retiradas de um depósito argiloso muito mole, na Baixada de Jacarepaguá, 15 anos após a execução de um aterro. As amostras foram retiradas do mesmo local onde foram obtidas as amostras da primeira campanha, por ocasião do projeto. Os ensaios CRS, realizados com diferentes velocidades de deformação, são comparados aos resultados dos ensaios SIC da campanha atual de investigação. Os parâmetros geotécnicos da camada de argila muito mole, 15 anos após a construção do aterro, são comparados aos parâmetros da camada original. O aumento das tensões de sobreadensamento e redução do OCR são obtidos da interpretação dos ensaios atuais. A grandeza do recalque foi inferida a partir da nova estratigrafia, através da espessura atual da camada na região investigada, pela variação do índice de vazios e pela variação do teor médio de umidade. Os recalques previstos originalmente, incluindo a parcela de compressão secundária, são comparados aos recalques inferidos e medidos através de placa de recalque. As principais conclusões da pesquisa sugerem que a qualidade dos corpos de prova da primeira campanha foram superiores aos atuais, apesar dos cuidados com a amostragem, transporte das amostras e preparação dos corpos de prova no laboratório na segunda campanha de ensaios. Atribuiu-se esta ocorrência ao processo construtivo, que impôs movimentação excessiva ao maciço argiloso, interferindo com suas características de maior uniformidade em seu processo de deposição natural. Os ensaios de adensamento com diferentes velocidades de carregamento apresentaram comportamento similar, com variação da posição relativa das curvas e x σv, com ensaios mais rápidos exibindo maiores índices de vazios. As curvas do índice de vazios versus tensão efetiva ilustram, de forma acentuada, a redução significativa do índice de vazios da segunda campanha em relação ao solo natural, antes do lançamento do aterro. Os recalques previstos e os obtidos, seja pela instrumentação, seja pelos demais registros, indicam valores bastante próximos, em face da variabilidade da estratigrafia e dos parâmetros geotécnicos inerentes à natureza dos depósitos sedimentares.