The Culture of Older Women’s Drinking in Australia

The purpose of this investigation was to undertake pilot research to develop an understanding of the current culture of older Australian women’s (35-50 years) drinking behaviour from a uniquely female perspective. Methods Two separate focus group interviews were undertaken with women (N = 11) aged between 35 and 50 years living in South-East Queensland, Australia. Women were asked to openly discuss how and why they drink alcohol (ie., their regular drinking behaviour), how this has changed over time, and the attitudes and values that influence their behaviour. Results Participants reported that their consumption of alcohol was more regulated and controlled and although some women drank more frequently, the quantity consumed at each drinking occasion had decreased significantly. Occasional consumption of large amounts of alcohol tended to be the result of ‘incidental drinking’ as opposed to ‘determined drinking’. The reasons for alcohol consumption were found to be internal as well as social. Internal reasons included stress relief, increased relaxation and self reward. Further, alcohol was used as a social lubricant. This cohort also reported being influenced by the drinking patterns of their partners. Social group matching was however found to have a negative impact on alcohol consumption as social groups most commonly endorsed lesser levels of intoxication. Further, the women reported that they were of an age in which they felt excessive drinking to be ‘undignified’. Personal reasons such as vocational and family responsibilities further modified the levels of consumption for individual women. Finally, it was reported that perceived health risks that can result from excessive and/or repetitive drinking led to a decreased in consumption. Conclusion It is proposed that the findings of this investigation could be used to improve current knowledge regarding more mature women’s drinking culture, associated risks and risk prevention strategies.

Can hybridization cause local extinction : the case for demographic swamping of the Australian native, Senecio pinnatifolius, by the invasive, S. madagascariensis?

The outcome of interspecific hybridization between native and invasive species depends on the relative frequencies of parental taxa and viability of hybrid progeny. We investigated individual and population level consequences of hybridization between the Australian native, Senecio pinnatifolius, and the exotic S. madagascariensis, with AFLP markers and used this information to simulate the expected outcome of hybridization.A high frequency (range 8.3-75.6 %) of hybrids was detected in open pollinated seeds of both species, but mature hybrids were absent from sympatric populations indicating that sympatric populations represent tension zones. A hybridization advantage was observed for S. madagascariensis,where significantly more progeny than expected were sired based on proportional representation of the two species in sympatric populations. Simulations indicated S. pinnatifolius could be replaced in sympatric populations if hybridization was density dependent.For this native-exotic pair, prezygotic isolating barriers are weak, but low hybrid viability maintains a strong postzygotic barrier to introgression. Due to asymmetric hybridization, S. pinnatifolius appears under threat from demographic swamping, and local extinction is possible where it occurs in sympatry with S. madagascariensis.

Person-independent facial expression detection using constrained local models

In automatic facial expression detection, very accurate registration is desired which can be achieved via a deformable model approach where a dense mesh of 60-70 points on the face is used, such as an active appearance model (AAM). However, for applications where manually labeling frames is prohibitive, AAMs do not work well as they do not generalize well to unseen subjects. As such, a more coarse approach is taken for person-independent facial expression detection, where just a couple of key features (such as face and eyes) are tracked using a Viola-Jones type approach. The tracked image is normally post-processed to encode for shift and illumination invariance using a linear bank of filters. Recently, it was shown that this preprocessing step is of no benefit when close to ideal registration has been obtained. In this paper, we present a system based on the Constrained Local Model (CLM) which is a generic or person-independent face alignment algorithm which gains high accuracy. We show these results against the LBP feature extraction on the CK+ and GEMEP datasets.

Subtropical design in South East Queensland : a handbook for planners, developers and decision makers

Subtropical Design in South East Queensland provides a direct link between climatic design, applied urban design and sustainable planning policy. The role that character and identity of a place plays in achieving environmental sustainability is explained. Values of local distinctiveness to do with climate, landscape and culture are identified and the environmental, social and economic benefits of applying subtropical design principles to planning are described. The handbook provides planners and urban designers with an understanding of how subtropical design principles apply within the different contexts of urban planning including the entire spectrum of urban scales from the regional scale, to the city, neighbourhood, street, individual building or site. Twelve interactive principles, and interrelated strategies, drawn predominantly from the body of knowledge of landscape architecture, architectural science and urban design are described in detail in text, and richly illustrated with diagrams and photographs.

Children re-read and re-write their neighborhoods : critical literacies and identity work

This chapter considers the complex literate repertoires of 21st century children in multicultural primary classrooms in Adelaide South Australia. It draws on the curricular and pedagogical work of two experienced primary school teachers who explore culture, race and class, by positioning children as textual producers across a variety of media. In particular we discuss two child-authored texts – A is for Arndale – a local alphabet book co-authored by children aged between eight and ten, and – Cooking Afghani Style - a magazine style film produced by a multi-aged class of children (aged eight to thirteen) recently arrived in Australia. In the process of making these texts, primary children engaged in reading as a cultural practice – re-reading and re-writing their neighbourhoods and identities (both individual and collective). This involved frequent excursions to local key sites, both familiar and unfamiliar to the children. They investigated how diverse children experienced and lived their lives in particular places within changing communities.

Profiles of organisational culture in Indonesian construction companies

Although relatively few studies have been undertaken analyzing the drivers of performance for construction companies in producing and delivering satisfactory quality of project works, findings from previous research reveal that there is a significant correlation between the company’s organisational culture and the quality performance of contractors. It has also been noted that the nature of organisational culture is a major determinant factor for quality improvement. This paper presents a summary of the results of a pilot study investigating the organisational culture profiles of five Indonesian construction companies. The survey utilizes the Organisational Culture Assessment Instrument (OCAI), which is based on the Competing Values Framework (CVF). This instrument assesses six important and significant traits of organisational culture: dominant characteristics, organisational leadership, management of employees, organisational ‘glue’, strategic emphasis, and criteria of success. These assessed cultural dimensions identify the most close-fitting perspective of a company’s inherent culture drawn from four possible types: clan, adhocracy, market, or hierarchy culture. Further discussion is presented, which describes the companies’ dominant cultural profiles in terms of strength and congruence and how an effective quality management system operates within the dominant culture type. This analysis contributes to the finding that a suitably ‘strong’ organisational culture impacts positively on construction organisation success within its own specific sector.

The mechanical heterogeneity of the hard callus influences local tissue strains during bone healing : a finite element study based on sheep experiments

During secondary fracture healing, various tissue types including new bone are formed. The local mechanical strains play an important role in tissue proliferation and differentiation. To further our mechanobiological understanding of fracture healing, a precise assessment of local strains is mandatory. Until now, static analyses using Finite Elements (FE) have assumed homogenous material properties. With the recent quantification of both the spatial tissue patterns (Vetter et al., 2010) and the development of elastic modulus of newly formed bone during healing (Manjubala et al., 2009), it is now possible to incorporate this heterogeneity. Therefore, the aim of this study is to investigate the effect of this heterogeneity on the strain patterns at six successive healing stages. The input data of the present work stemmed from a comprehensive cross-sectional study of sheep with a tibial osteotomy (Epari et al., 2006). In our FE model, each element containing bone was described by a bulk elastic modulus, which depended on both the local area fraction and the local elastic modulus of the bone material. The obtained strains were compared with the results of hypothetical FE models assuming homogeneous material properties. The differences in the spatial distributions of the strains between the heterogeneous and homogeneous FE models were interpreted using a current mechanobiological theory (Isakson et al., 2006). This interpretation showed that considering the heterogeneity of the hard callus is most important at the intermediate stages of healing, when cartilage transforms to bone via endochondral ossification.

Endochondral ossification in vitro is influenced by mechanical bending

Bone development is influenced by the local mechanical environment. Experimental evidence suggests that altered loading can change cell proliferation and differentiation in chondro- and osteogenesis during endochondral ossification. This study investigated the effects of three-point bending of murine fetal metatarsal bone anlagen in vitro on cartilage differentiation, matrix mineralization and bone collar formation. This is of special interest because endochondral ossification is also an important process in bone healing and regeneration. Metatarsal preparations of 15 mouse fetuses stage 17.5 dpc were dissected en bloc and cultured for 7 days. After 3 days in culture to allow adherence they were stimulated 4 days for 20 min twice daily by a controlled bending of approximately 1000-1500 microstrain at 1 Hz. The paraffin-embedded bone sections were analyzed using histological and histomorphometrical techniques. The stimulated group showed an elongated periosteal bone collar while the total bone length was not different from controls. The region of interest (ROI), comprising the two hypertrophic zones and the intermediate calcifying diaphyseal zone, was greater in the stimulated group. The mineralized fraction of the ROI was smaller in the stimulated group, while the absolute amount of mineralized area was not different. These results demonstrate that a new device developed to apply three-point bending to a mouse metatarsal bone culture model caused an elongation of the periosteal bone collar, but did not lead to a modification in cartilage differentiation and matrix mineralization. The results corroborate the influence of biophysical stimulation during endochondral bone development in vitro. Further experiments with an altered loading regime may lead to more pronounced effects on the process of endochondral ossification and may provide further insights into the underlying mechanisms of mechanoregulation which also play a role in bone regeneration.

Expression pattern of Oct-4, Sox2, and c-Myc in the primary culture of human dental pulp derived cells

Dental pulp cells (DPCs) have shown promising potential in dental tissue repair and regeneration. However, during in vitro culture, these cells undergo replicative senescence and result in significant alteration in cell proliferation and differentiation. Recently, the transcription factors of Oct-4, Sox2, c-Myc, and Klf4 have been reported to play a regulatory role in the stem cell self-renewal process, namely cell reprogramming. Therefore, it is interesting to know whether the replicative senescence during the culture of dental pulp cells is related to the diminishing of the expression of these transcription factors. In this study, we investigated the expression of the reprogramming markers Oct-4, Sox2, and c-Myc in the in vitro explant cultured dental pulp tissues and explant cultured dental pulp cells (DPCs) at various passages by immunofluorescence staining and real-time polymerase chain reaction analysis. Our results demonstrated that Oct-4, Sox2, and c-Myc translocated from nucleus in the first 2 passages to cytoplasm after the third passage in explant cultured DPCs. The mRNA expression of Oct-4, Sox2, and c-Myc elevated significantly over the first 2 passages, peaked at second passage (P < .05), and then decreased along the number of passages afterwards (P < .05). For the first time we demonstrated that the expression of reprogramming markers Oct-4, Sox2, and c-Myc was detectable in the early passaged DPCs, and the sequential loss of these markers in the nucleus during DPC cultures might be related to the cell fate of dental pulp derived cells during the long-term in vitro cultivation under current culture conditions.

Local adjustment and global adaptation of control periods for QoC management of control systems

Linking real-time schedulability directly to the Quality of Control (QoC), the ultimate goal of a control system, a hierarchical feedback QoC management framework with the Fixed Priority (FP) and the Earliest-Deadline-First (EDF) policies as plug-ins is proposed in this paper for real-time control systems with multiple control tasks. It uses a task decomposition model for continuous QoC evaluation even in overload conditions, and then employs heuristic rules to adjust the period of each of the control tasks for QoC improvement. If the total requested workload exceeds the desired value, global adaptation of control periods is triggered for workload maintenance. A sufficient stability condition is derived for a class of control systems with delay and period switching of the heuristic rules. Examples are given to demonstrate the proposed approach.

Researching for social justice: Contextual, conceptual and methodological challenges

Reforming schooling to enable engagement and success for those typically marginalised and failed by schools is a necessary task for educational researchers and activists concerned with injustice. However, it is a difficult pursuit, with a long history of failed attempts. This paper outlines the rationale of an Australian partnership research project, Redesigning Pedagogies in the North (RPiN), which took on such an effort in public secondary schooling contexts that, in current times, are beset with 'crisis' conditions and constrained by policy rationales that make it difficult to pursue issues of justice. Within the project, university investigators and teachers collaborated in action research that drew on a range of conceptual resources for redesigning curriculum and pedagogies, including: funds of knowledge, vernacular or local literacies; place-based education; the 'productive pedagogies' and the 'unofficial curriculum' of popular culture and out-of-school learning settings. In bringing these resources together with the aim of interrupting the reproduction of inequality, the project developed a methodo-logic which builds on Bourdieuian insights.

Information security management : a case study of an information security culture

This thesis argues that in order to establish a sound information security culture it is necessary to look at organisation's information security systems in a socio- technical context. The motivation for this research stems from the continuing concern of ineffective information security in organisations, leading to potentially significant monetary losses. It is important to address both technical and non- technical aspects when dealing with information security management. Culture has been identified as an underlying determinant of individuals' behaviour and this extends to information security culture, particularly in developing countries. This research investigates information security culture in the Saudi Arabia context. The theoretical foundation for the study is based on organisational and national culture theories. A conceptual framework for this study was constructed based on Peterson and Smith's (1997) model of national culture. This framework guides the study of national, organisational and technological values and their relationships to the development of information security culture. Further, the study seeks to better understand how these values might affect the development and deployment of an organisation's information security culture. Drawing on evidence from three exploratory case studies, an emergent conceptual framework was developed from the traditional human behaviour and the social environment perspectives used in social work, This framework contributes to in- formation security management by identifying behaviours related to four modes of information security practice. These modes provide a sound basis that can be used to evaluate individual organisational members' behaviour and the adequacy of ex- isting security measures. The results confirm the plausibility of the four modes of practice. Furthermore, a final framework was developed by integrating the four modes framework into the research framework. The outcomes of the three case stud- ies demonstrate that some of the national, organisational and technological values have clear impacts on the development and deployment of organisations' informa- tion security culture. This research, by providing an understanding the in uence of national, organi- sational and technological values on individuals' information security behaviour, contributes to building a theory of information security culture development within an organisational context. The research reports on the development of an inte- grated information security culture model that highlights recommendations for developing an information security culture. The research framework, introduced by this research, is put forward as a robust starting point for further related work in this area.

Benchmarking local E-Government

Increasingly, almost everything we do in our daily lives is being influenced by information and communications technologies (ICTs) including the Internet. The task of governance is no exception with an increasing number of national, state, and local governments utilizing ICTs to support government operations, engage citizens, and provide government services. As with other things, the process of governance is now being prefixed with an “e”. E-governance can range from simple Web sites that convey basic information to complex sites that transform the customary ways of delivering all sorts of government services. In this respect local e-government is the form of e-governance that specifically focuses on the online delivery of suitable local services by local authorities. In practice local e-government reflects four dimensions, each one dealing with the functions of government itself. The four are: (a) e-services, the electronic delivery of government information, programs, and services often over the Internet; (b) e-management, the use of information technology to improve the management of government. This might range from streamlining business processes to improving the flow of information within government departments; (c) e-democracy the use of electronic communication vehicles, such as e-mail and the Internet, to increase citizen participation in the public decision-making process; (d) e-commerce, the exchange of money for goods and services over the Internet which might include citizens paying taxes and utility bills, renewing vehicle registrations, and paying for recreation programs, or government buying office supplies and auctioning surplus equipment (Cook, LaVigne, Pagano, Dawes, & Pardo, 2002). Commensurate with the rapid increase in the process of developing e-governance tools, there has been an increased interest in benchmarking the process of local e-governance. This benchmarking, which includes the processes involved in e-governance as well as the extent of e-governance adoption or take-up is important as it allows for improved processes and enables government agencies to move towards world best practice. It is within this context that this article discusses benchmarking local e-government. It brings together a number of discussions regarding the significance of benchmarking, best practices and actions for local e-government, and key elements of a successful local e-government project.

Culture and creative industries in Australia

This paper draws upon the Australian case to argue that the case for support for cultural production and cultural infrastructure has been strengthened overall by its alignment to economic policy goals. In this respect, the rise of creative industries policy discourses is consistent with trends in thinking about cultural policy that have their roots in the Creative Nation strategies of the early 1990s. In terms of the earlier discussion, cultural policy is as much driven by Schumpeterian principals as it is by Keynesian ones. Such an approach is not without attendant risks, and two stand out. The first is the risk of marginalizing the arts, through a policy framework that gives priority to developing the digital content industries, and viewing the creative industries as primarily an innovation platform. The second is that other trends in the economy, such as the strong Australian dollar resulting from the mining boom, undercuts the development of cultural production in the sections of the creative industries where international trade and investment is most significant, such as the film industry and computer games. Nonetheless, after over a decade of vibrant debate, this focus on linking the cultural and economic policy goals of the creative industries has come to be consistent with broader international trends in the field.