Three new species of Vitaceae from mesoamerica

Three new species, Cissus nicaraguensis, C. patellicalyx, and Ampelocissus mesoamericana, are described from Nicaragua, Costa Rica, and El Salvador, respectively. Cissus nicaraguensis can be distinguished from all other Neotropical species by the combination of urceolate calyx and simple leaves. Cissus patellicalyx is recognized by its subspherical floral buds, immature fruits minutely tuberculate when dried, and the distinctly raised nerves of the abaxial leaf surface. Ampelocissus mesoamericana is characterized by lenticels, indument, and the obpyriform flower buds.

Characterizing subpopulations of neoplastic cells in serous effusions - the role of immunocytochemistry

OBJECTIVE: To analyze the role of immunochemistry in serous effusions.STUDY DESIGN: We analyzed cell blocks of 18 pleural and 18 peritoneal effusions diagnosed as malignant (18), benign (14) and suspicious (4). They were immunostained by the avidin-biotin complex method with a panel of four monoclonal antibodies-CEA, Ber-EP4, LeuM1 (CD15) and r53-and for lectins (Ulex europaeus) UEA-1, ConA and ConBr. RESULTS: Seventeen of the 18 cases of adenocarcinoma were positive for CEA (95%), 12 (66.6%)for Bev-EP4, 11 (61 %)for CD15 nild 11 (62 %)for p53. Twelve of the 18 (66.6%) were positive for UEA-1, CEA, Ber-EP4 and CD15. UEA-1 did not react with mesothelial cells. p53 Gave a positive reaction in only one case, reactive mesothelial cells. ConA and ConBr reacted indiscriminately with benign and malignant cells; thus, it was not useful in distinguishing between these cells.CONCLUSION: In this context no antibody used alone is reliable for corroborating a diagnosis, but the selective use of a small panel of three markers (CEA, Ber-EP4 and LeuM1) can be very useful in solving diagnostic difficulties in the cytodiagnosis of serous effusions.

Connective tissue graft to correct peri-implant soft tissue margin: A clinical report

This clinical report describes the use of a subepithelial connective tissue graft to recontour a soft tissue margin discrepancy for a single-implant crown in the anterior maxilla. This procedure demonstrates that the use of soft tissue grafts to correct an esthetic deficiency may be a feasible approach to establish new and stable peri-implant soft tissue contours. The patient presented was followed for 18 months.

Reproductive phenology of climbers in a Southeastern Brazilian forest

The reproductive phenology of the entire climber community (96 species of lianas and 40 species of vines) in a semideciduous forest in Southeastern Brazil (22 degrees 49'45''S; 47 degrees 06'33''W and 670 m altitude) was observed from March 1988 to February 1991. Phenological observations were made weekly by walking along a 10.5 km trail in the interior and at the forest edges of the Santa Genebra Reserve (SGR). The most species-rich families of climbers were Bignoniaceae (22), Malpighiaceae (17), Sapindaceae (12) and Asteraceae (12). Flowering patterns for woody lianas and herbaceous vines differed. Lianas had two flowering peaks: a minor peak in March in the transition from wet to dry season, and a major peak in October during the transition from dry to wet season. The flowering peak for herbaceous vines was in April. Fruiting of lianas was highly seasonal, with one peak in the late dry season (July-August). Fruiting for vines was less seasonal with a slight peak in March. These differences were consistent with the predominance of wind-dispersed fruits among lianas (72% of species) versus vines (52%). Low rainfall, high leaf fall, and strong winds during the dry season favor wind dispersal. More species of vines (40%) have animal-dispersed seeds than lianas (19%), and most vines fruited during the wet season. Phenological patterns of climbers and trees and treelets at SGR differed. The life form of lianas and their system of reserve economy may allow them to reproduce during periods unfavorable to trees. Displacement of peak flowering periods of trees and climbers pollinated by bees and small generalist insects may decrease competition for pollen vectors among species of these two groups of plants. Whereas the fruiting patterns of wind-dispersed trees and climbers at SGR were similar (most species fruiting during the dry season), animal-dispersed trees and treelets fruited throughout the year while animal-dispersed climbers exhibited a pronounced peak in late wet season. The distinct phenological patterns of climbers, generally complementary to those presented by trees, resulted in constant availability of Bowers and fruits throughout the year and enhances the importance of this plant group in Neotropical forests.

A new island species of Scinax (Anura; Hylidae) from southeastern Brazil

A new species of hylid frog, from the genus Scinax, is described from Ilha de Porcos Pequena at the southern coast of São Paulo State, southeastern Brazil. The new species belongs to the Scinax perpusillus species group and is diagnosed by the following set of characters: moderate-size (males 16.2-18.8 turn SVL, female 18.8-20.6 mm SVL); canthus rostralis distinct and well defined; V-shaped depression between nostrils; eyes protruding and prominent, glandular skin surface of legs. This new species is found only on Ilha de Porcos Pequena, an island of approximately 24 ha and, therefore, is threatened because of restricted range size and susceptibility to habitat modification.

Overlay removable partial dentures for a patient with ectodermal dysplasia: A clinical report

The orofacial characteristics of ectodermal dysplasia include anodontia or hypodontia, hypoplastic conical teeth, underdevelopment of the alveolar ridges, frontal bossing, a depressed nasal bridge, protuberant lips, and hypotrichosis. Patients with this disease often need complex prosthetic treatment. The options for a definitive treatment plan may include fixed, removable, or implant-supported prostheses, singly or in combination. However, financial constraints and other priorities can prevent patients from choosing the most desirable treatment. This clinical report describes the diagnosis and treatment of ectodermal dysplasia in an 18-year-old man. The treatment included interim removable partial dentures fabricated to establish an acceptable therapeutic occlusal vertical dimension, followed by definitive overlay removable partial dentures and composite restorations.

Oral paracoccidioidomycosis: a study of 36 South American patients

Paracoccidioidomycosis (South American blastomycosis) is an uncommon, progressive systemic mycosis, virtually only seen in persons who have visited Latin America. Reports of oral lesions are extremely rare in the English-language literature. Thirty-six adults with oral lesions as the first sign of paracoccidioidomycosis are described; this appears to be the largest series in the dental literature. All had chronic proliferative mulberry-like ulcerated oral lesions; the diagnosis was confirmed histologically. The gingiva or alveolar process was the typical site, but lesions were also seen particularly on the palate and lip. Most of the patients proved to have detectable pulmonary involvement. Patients with lesions in the oropharynx, tongue, or floor of mouth all had confirmed pulmonary lesions.

High-speed cavity preparation techniques with different water flows

Statement of problem. Cavity and tooth preparations generate heat because the use of rotary cutting instruments on dental tissues creates friction. Dental pulps cannot survive temperature increases greater than 5.5degreesC.Purpose. This study evaluated the efficiency of 3 different water flows for 2 different tooth preparation techniques to determine which are safe for use.Material and methods. Thermocouples were placed in the pulpal chambers of 30 bovine teeth, and 1 of 2 tooth preparation techniques was used: a low-load intermittent tooth preparation technique or a high-load tooth preparation technique without intervals. Water flows of 0, 30, and 45 mL/min were associated with each technique, for a total of 6 different groups. The results were analyzed with a 2-factor analysis of variance (P<.05).Results. Temperature increases with the high-load technique were 16.40&DEG;C without cooling (group 1), 11.68&DEG;C with 30 mL/min air-water spray cooling (group III), and 9.96&DEG;C with 45 mL/min cooling (group V). With the low-load tooth preparation technique, a 9.54&DEG;C increase resulted with no cooling (group II), a 1.56&DEG;C increase with 30 mL/min air-water spray cooling (group TV), and a 0.04&DEG;C decrease with 45 mL/min cooling (group VI). The low-load technique was associated with more ideal temperature changes.Conclusion. The results of this study confirm the necessity of using a low-load technique and water coolants during cavity and tooth preparation procedures.

Anatomy of the oral cavity of hylid larvae from the genera Aplastodiscus, Bokermannohyla, and Hypsiboas (Amphibia, anura): Description and systematic implications

Internal larval oral anatomy was used to explore morphological diversity and its contribution to the systematics of the genera Aplastodiscus, Bokerinannohyla, and Hypsiboas, belonging to the tribe Cophomantini. Internal oral morphology was examined for tadpoles of 12 species. All species have a large pair of infralabial papillae on the buccal floor and other papillae on the prelingual region. In Aplastodiscus and Bokerinannohyla, the large infralabial papillae have digitiform secondary projections. The number and arrangement of the buccal floor papillae varies among species, but they are more numerous in Aplastodiscus and Bokerinannohyla. The arrangement of the postnarial papillae is variable, but in Aplastodiscus and Bokerinannohyla, they show a definite, inverted V-shape pattern. The lateral ridge papillae are more complex in larvae of Bokertnannohyla with long digitiform secondary projections. Tadpoles of only Aplastodiscus albofrenatus, Aplastodiscus eugenioi, and Bokerinannohyla luctuosa have papillae on the buccal roof arena and larvae of all species have lateral roof papillae except Hypsiboas albomarginatus and Hypsiboas cinerascens. Larvae of Aplastodiscus, Bokermannohyla, and Hypsiboas presumably share the presence of vacuities anterior to the internal nares; although this character state is clearly synapomorphic within hylids, it is still uncertain whether it is exclusive of these three genera or whether it is present in the other genera of the tribe Cophomantini (Hyloscirtus and Myersiohyla). The inclusion of internal oral anatomy characters, such as the narial vacuities, in systematic studies is certainly valuable because it will provide additional information toward the understanding of phylogenetic relationships.

Effect of microwave sterilization and water storage on the Vickers hardness of acrylic resin denture teeth

Statement of problem. Acrylic resin denture teeth soften upon immersion in water, and the heating generated during microwave sterilization may enhance this process.Purpose. Six brands of acrylic resin denture teeth were investigated with respect to the effect of microwave sterilization and water immersion on Vickers hardness (VHN).Material and Methods. The acrylic resin denture teeth (Dentron [D], Vipi Dent Plus [V], Postaris [P], Biolux [B], Trilux [T], and Artiplus [A]) were embedded in heat-polymerized acrylic resin within polyvinylchloride tubes. For each brand, the occlusal surfaces of 32 identical acrylic resin denture posterior teeth were ground flat with 1500-grit silicon carbide paper and polished on a wet polishing wheel with a slurry of tin oxide. Hardness tests were performed after polishing (control group, C) after polishing followed by 2 cycles of microwave sterilization at 650 W for 6 minutes (MwS group), after polishing followed by 90-day immersion in water (90-day Wim group), and after polishing followed by 90-day storage in water and 2 cycles of microwave sterilization (90-day Wim + MwS group). For each specimen, 8 hardness measurements were made and the mean was calculated. Data were analyzed with a 2-way analysis of variance followed by the Bonferroni procedure to determine any significance between pairs of mean values (alpha=.01).Results: Mircrowave sterilization of specimens significantly decreased (P <.001) the hardness of the acrylic resin denture tooth specimens P (17.8 to 16.6 VHN, V (18.3 to 15.8 VHN), T (17.4 to 15.3 VHN), B (16.8 to 15.7 VHN), and A (17.3 to 15.7 VHN). For all acrylic resin denture teeth, no significant differences in hardness were found between the groups Mws, 90-day Wim, and 90-day Wim + MwS, with the exception of the 90-day Wim + MwS tooth A specimens (14.4 VHN), which demonstrated significant lower mean values (P <.001) than the 90-day Wim (15.8 VHN) and MwS (15.7 VHN) specimens.Conclusions. For specimens immersed in water for 90 days, 2 cycles of microwave sterilization had no effect on the hardness of most of the acrylic resin denture teeth.

Composite occlusal surfaces for acrylic resin denture teeth

Acrylic resin denture teeth often exhibit rapid occlusal wear, which may lead to a loss of chewing efficiency and a loss of vertical dimension of occlusion. The use of metal occlusal surfaces on the acrylic resin denture teeth will minimize occlusal wear. Several articles have described methods to construct metal occlusal surfaces; however, these methods are time-consuming, costly, and sometimes considered to be unesthetic. These methods also require that the patient be without the prosthesis for the time necessary to perform the laboratory procedures. This article presents a quick, simple, and relatively inexpensive procedure for construction of composite occlusal surfaces on complete and partial dentures.