Assessing the Conservation Status and Threats to Priority Plants: a threat assessment approach and case study in South-East Queensland, Australia

bstract: During the Regional Forest Agreement (RFA) process in south-east Queensland, the conservation status of, and threats to, priority vascular plant taxa in the region was assessed. Characteristics of biology, demography and distribution were used to assess the species' intrinsic risk of extinction. In contrast, the threats to the taxa (their extrinsic risk of extinction) were assessed using a decision-support protocol for setting conservation targets for taxa lacking population viability analyses and habitat modelling data. Disturbance processes known or suspected to be adversely affecting the taxa were evaluated for their intensity, extent and time-scale. Expert opinion was used to provide much of the data and to assess the recommended protection areas. Five categories of intrinsic risk of extinction were recognised for the 105 priority taxa: critically endangered (43 taxa); endangered (29); vulnerable (21); rare (10); and presumed extinct (2). Only 6 of the 103 extant taxa were found to be adequately reserved and the majority were considered inadequately protected to survive the current regimes of threatening processes affecting them. Data were insufficient to calculate a protection target for one extant taxon. Over half of the taxa require all populations to be conserved as well as active management to alleviate threatening processes. The most common threats to particular taxa were competition from weeds or native species, inappropriate fire regimes, agricultural clearing, forestry, grazing by native or feral species, drought, urban development, illegal collection of plants, and altered hydrology. Apart from drought and competition from native species, these disturbances are largely influenced or initiated by human actions. Therefore, as well as increased protection of most of the taxa, active management interventions are necessary to reduce the effects of threatening processes and to enable the persistence of the taxa.

VALORAÇÃO DE ATIVOS E MULTAS AMBIENTAIS: ANÁLISE SIMULADA DE EMPREENDIMENTOS HOTELEIROS EM ÁREAS PROTEGIDAS

O crescimento desordenado e a ausência de políticas públicas mais eficientes levaram a uma diversificação quanto ao uso dos recursos naturais, principalmente no que se refere à água para o saneamento básico. O marco regulatório estabelecido na década de 1980 registrou as políticas públicas para o meio ambiente, que trouxeram avanços sobre o tema, desencadeando uma série de ações voltadas tanto para a estrutura burocrática e da prevenção, quanto solução para os problemas de degradação e esgotamento dos recursos naturais. Com o advento das leis específicas de proteção aos mananciais e mediante a lei 13.579/09 do Estado de São Paulo que trata sobre a área da Billings, percebeu-se um avanço na questão do gerenciamento para proteção e desenvolvimento de acordo com as características da região. Instrumentos de políticas públicas para conter as ações referentes aos danos causados ao meio ambiente, como a lei contra crimes ambientais foram às ações práticas do Estado para conter tais ações. O Objetivo desta pesquisa é analisar as possíveis discrepâncias entre as penalidades financeiras aplicadas na ocorrência das infrações ambientais e os modelos de valoração dos ativos ambientais, utilizando a simulação de implantação de um hotel em áreas de proteção e recuperação de manancial no Município de São Bernardo do Campo no Estado de São Paulo. O desenvolvimento da pesquisa se baseou no método de custo de reposição (MCR) para dimensionar os possíveis impactos gerados por um empreendimento hoteleiro e seu respectivo valor econômico. Posteriormente, os impactos ambientais foram relacionados com a legislação do município para determinar os valores das possíveis penalidades aplicáveis ao dano causado. Dentre os resultados levantados, verificou-se uma significativa discrepância entre a valoração econômica e as multas aplicáveis, sendo que nos impactos referentes a impermeabilidade do solo e contaminação do lençol freático, com diferenças superiores em relação às penalidades de R$ 804.922,78 e R$ 453.333,33 respectivamente. A partir da metodologia aplicada na pesquisa, observou-se que as penalidades incidentes em casos de danos ao meio ambiente, muitas vezes não atinge o objetivo, que é inibir a ação do infrator, pois o real custo econômico não é medido na aplicação do valor da multa.

Reengineering helps improve materials procurement in Indian oil refinery

The materials management function is always a major concern to the management of any organisation as high inventory and inefficient procurement processes have a significant effect on profitability. The problems multiply in the face of a very dynamic business environment, as is the present case in India. Hence, the existing system of materials planning, procurement processes and inventory management require reviewing with respect to the changed business environment. This study shows a radical improvement in materials procurement function of an Indian petroleum refinery through Business Process Reengineering (BPR) by analysing current process, identifying key issues, deriving paradigm shifts and developing reengineered processes through customer value analysis. BPR has been carried out on existing processes of 'material planning and procurement' and 'warehousing and surplus disposal'. The reengineered processes for the materials management function triggered several improvement projects that were identified by the group of executives who took part in the reengineering exercise. Those projects were implemented in an integrated framework, with the application of state of the art information technology tools and building partnership alliance among all stakeholders. Considerable improvements in overall functions of the organisation are observed, along with financial benefits. Copyright © 2006 Inderscience Enterprises Ltd.

A configuration framework of manufacturing strategy paradigm in state owned enterprises within China's petrochemical industry:building context-embedded configurations for the paradigm of strategic manufacturing management from exploratory case studies

The role of the production system as a key determinant of competitive performance of business operations- has long been the subject of industrial organization research, even predating the .explicit conceptua1isation of manufacturing, strategy in the literature. Particular emergent production issues such as the globalisation of production, global supply chain management, management of integrated manufacturing and a growing e~busjness environment are expected to critically influence the overall competitive performance and therefore the strategic success of the organization. More than ever, there is a critical need to configure and improve production system and operations competence in a strategic way so as to contribute to the long-term competitiveness of the organization. In order to operate competitively and profitably, manufacturing companies, no matter how well managed, all need a long-term 'strategic direction' for the development of operations competence in order to consistently produce more market value with less cost towards a leadership position. As to the long-term competitiveness, it is more important to establish a dynamic 'strategic perspective' for continuous operational improvements in pursuit of this direction, as well as ongoing reviews of the direction in relation to the overall operating context. However, it also clear that the 'existing paradigm of manufacturing strategy development' is incapable of adequately responding to the increasing complexities and variations of contemporary business operations. This has been factually reflected as many manufacturing companies are finding that methodologies advocated in the existing paradigm for developing manufacturing strategy have very limited scale and scope for contextual contingency in empirical application. More importantly, there has also emerged a deficiency in the multidimensional and integrative profile from a theoretical perspective when operationalising the underlying concept of strategic manufacturing management established in the literature. The point of departure for this study was a recognition of such contextual and unitary limitations in the existing paradigm of manufacturing strategy development when applied to contemporary industrial organizations in general, and Chinese State Owned Enterprises (SOEs) in particular. As China gradually becomes integrated into the world economy, the relevance of Western management theory and its paradigm becomes a practical matter as much as a theoretical issue. Since China markedly differs from Western countries in terms of culture, society, and political and economic systems, it presents promising grounds to test and refine existing management theories and paradigms with greater contextual contingency and wider theoretical perspective. Under China's ongoing programmes of SOE reform, there has been an increased recognition that strategy development is the very essence of the management task for managers of manufacturing companies in the same way as it is for their counterparts in Western economies. However, the Western paradigm often displays a rather naive and unitary perspective of the nature of strategic management decision-making, one which largely overlooks context-embedded factors and social/political influences on the development of manufacturing strategy. This thesis studies the successful experiences of developing manufacturing strategy from five high-performing large-scale SOEs within China’s petrochemical industry. China’s petrochemical industry constitutes a basic heavy industrial sector, which has always been a strategic focus for reform and development by the Chinese government. Using a confirmation approach, the study has focused on exploring and conceptualising the empirical paradigm of manufacturing strategy development practiced by management. That is examining the ‘empirical specifics’ and surfacing the ‘managerial perceptions’ of content configuration, context of consideration, and process organization for developing a manufacturing strategy during the practice. The research investigation adopts a qualitative exploratory case study methodology with a semi-structural front-end research design. Data collection follows a longitudinal and multiple-case design and triangulates case evidence from sources including qualitative interviews, direct observation, and a search of documentations and archival records. Data analysis follows an investigative progression from a within-case preliminary interpretation of facts to a cross-case search for patterns through theoretical comparison and analytical generalization. The underlying conceptions in both the literature of manufacturing strategy and related studies in business strategy were used to develop theoretical framework and analytical templates applied during data collection and analysis. The thesis makes both empirical and theoretical contributions to our understanding of 'contemporary management paradigm of manufacturing strategy development'. First, it provides a valuable contextual contingency of the 'subject' using the business setting of China's SOEs in petrochemical industry. This has been unpacked into empirical configurations developed for its context of consideration, its content and process respectively. Of special note, a lean paradigm of business operations and production management discovered at case companies has significant implications as an emerging alternative for high-volume capital intensive state manufacturing in China. Second, it provides a multidimensional and integrative theoretical profile of the 'subject' based upon managerial perspectives conceptualised at case companies when operationalising manufacturing strategy. This has been unpacked into conceptual frameworks developed for its context of consideration, its content constructs, and its process patterns respectively. Notably, a synergies perspective towards the operating context, competitive priorities and competence development of business operations and production management has significant implications for implementing a lean manufacturing paradigm. As a whole, in so doing, the thesis established a theoretical platform for future refinement and development of context-specific methodologies for developing manufacturing strategy.

Envisioning urban sustainability

Envisioning sustainable cities through and exploration of key documentary films on urban development

Small business development and the “learning organisation”

The paper proffers a tentative conceptualisation of the “small business strategic learning process”, demonstrating the complexity of the small firm learning and management task. The framework, built upon personal construct theory and learning theories, is elaborated through the grounding of relevant areas of the strategic management literature in an understanding of the distinctive managerial and behavioural features of the small business. The framework is then utilised to underpin consideration of the concepts of “organisational learning” and the “learning organisation” within a small firm developmental context. It is suggested that whilst organisational learning may be a key and effective small business management approach to underpin sustainable development, the learning organisation, as currently conceived in the mainstream literature, fails to recognise and address the idiosyncrasies, problems and constraints relating to sustainable small business development. There does appear, however, to be great potential for extending understanding of the learning organisation concept into the small business context. An indicative research agenda is suggested.

Introduction : the role of quality, production and technological innovation in improving competitive performance

Quality, production and technological innovation management rank among the most important matters of concern to modern manufacturing organisations. They can provide companies with the decisive means of gaining a competitive advantage, especially within industries where there is an increasing similarity in product design and manufacturing processes. The papers in this special issue of International Journal of Technology Management have all been selected as examples of how aspects of quality, production and technological innovation can help to improve competitive performance. Most are based on presentations made at the UK Operations Management Association's Sixth International Conference held at Aston University at which the theme was 'Getting Ahead Through Technology and People'. At the conference itself over 80 papers were presented by authors from 15 countries around the world. Among the many topics addressed within the conference theme, technological innovation, quality and production management emerged as attracting the greatest concern and interest of delegates, particularly those from industry. For any new initiative to be implemented successfully, it should be led from the top of the organization. Achieving the desired level of commitment from top management can, however, be a difficulty. In the first paper of this issue, Mackness investigates this question by explaining how systems thinking can help. In the systems approach, properties such as 'emergence', 'hierarchy', 'commnication' and 'control' are used to assist top managers in preparing for change. Mackness's paper is then complemented by Iijima and Hasegawa's contribution in which they investigate the development of Quality Information Management (QIM) in Japan. They present the idea of a Design Review and demonstrate how it can be used to trace and reduce quality-related losses. The next paper on the subject of quality is by Whittle and colleagues. It relates to total quality and the process of culture change within organisations. Using the findings of investigations carried out in a number of case study companies, they describe four generic models which have been identified as characterising methods of implementing total quality within existing organisation cultures. Boaden and Dale's paper also relates to the management of quality, but looks specifically at the construction industry where it has been found there is still some confusion over the role of Quality Assurance (QA) and Total Quality Management (TQM). They describe the results of a questionnaire survey of forty companies in the industry and compare them to similar work carried out in other industries. Szakonyi's contribution then completes this group of papers which all relate specifically to the question of quality. His concern is with the two ways in which R&D or engineering managers can work on improving quality. The first is by improving it in the laboratory, while the second is by working with other functions to improve quality in the company. The next group of papers in this issue all address aspects of production management. Umeda's paper proposes a new manufacturing-oriented simulation package for production management which provides important information for both design and operation of manufacturing systems. A simulation for production strategy in a Computer Integrated Manufacturing (CIM) environment is also discussed. This paper is then followed by a contribution by Tanaka and colleagues in which they consider loading schedules for manufacturing orders in a Material Requirements Planning (MRP) environment. They compare mathematical programming with a knowledge-based approach, and comment on their relative effectiveness for different practical situations. Engstrom and Medbo's paper then looks at a particular aspect of production system design, namely the question of devising group working arrangements for assembly with new product structures. Using the case of a Swedish vehicle assembly plant where long cycle assembly work has been adopted, they advocate the use of a generally applicable product structure which can be adapted to suit individual local conditions. In the last paper of this particular group, Tay considers how automation has affected the production efficiency in Singapore. Using data from ten major industries he identifies several factors which are positively correlated with efficiency, with capital intensity being of greatest interest to policy makers. The two following papers examine the case of electronic data interchange (EDI) as a means of improving the efficiency and quality of trading relationships. Banerjee and Banerjee consider a particular approach to material provisioning for production systems using orderless inventory replenishment. Using the example of a single supplier and multiple buyers they develop an analytical model which is applicable for the exchange of information between trading partners using EDI. They conclude that EDI-based inventory control can be attractive from economic as well as other standpoints and that the approach is consistent with and can be instrumental in moving towards just-in-time (JIT) inventory management. Slacker's complementary viewpoint on EDI is from the perspective of the quality relation-ship between the customer and supplier. Based on the experience of Lucas, a supplier within the automotive industry, he concludes that both banks and trading companies must take responsibility for the development of payment mechanisms which satisfy the requirements of quality trading. The three final papers of this issue relate to technological innovation and are all country based. Berman and Khalil report on a survey of US technological effectiveness in the global economy. The importance of education is supported in their conclusions, although it remains unclear to what extent the US government can play a wider role in promoting technological innovation and new industries. The role of technology in national development is taken up by Martinsons and Valdemars who examine the case of the former Soviet Union. The failure to successfully infuse technology into Soviet enterprises is seen as a factor in that country's demise, and it is anticipated that the newly liberalised economies will be able to encourage greater technological creativity. This point is then taken up in Perminov's concluding paper which looks in detail at Russia. Here a similar analysis is made of the concluding paper which looks in detail at Russia. Here a similar analysis is made of the Soviet Union's technological decline, but a development strategy is also presented within the context of the change from a centralised to a free market economy. The papers included in this special issue of the International Journal of Technology Management each represent a unique and particular contribution to their own specific area of concern. Together, however, they also argue or demonstrate the general improvements in competitive performance that can be achieved through the application of modern principles and practice to the management of quality, production and technological innovation.

ICT innovation diffusion in small logistics service providers:an empirical study

For companies competing in highly dynamic markets, innovation is considered a fundamental component of a successful business as it allows companies to sustain profit margins, sales growth and reduce competitors’ pressures. Information and communication technology (ICT) is essential innovation enablers especially in service companies. The focus of the paper is on the analysis of the role of ICT in innovation processes of small third-party logistics service providers (3PLs). On the basis of quantitative evidence emerging from a recent survey carried out on the Italian 3PL market, the paper analyses how ICT is used to support innovation and the factors the inhibit/facilitate the usage of ICT in such companies. Implications for supply chain innovation management are derived from the research and managerial perspectives.