Heterosis for yield and its physiological determinants in wheat

Heterosis in hybrid wheat varieties produced using a chemical hybridising agent was assessed in field experiments. Hyno Esta and its parents were compared in factorial combinations of four-seed rates (25-300 seeds m(-2)) and two nitrogen fertilizer rates (0 and 200 kg N ha(-1)) in 2001/02 and again in 2002/03. Hyno Rista and Hyno Renta and their parents were compared at two-seed rates in 2001/02. Hyno Rista and its parents were added factorially to the Hyno Esta experiment in 2002/03, while Hyno Renta and Hybred and their parents were compared at two seed rates in 2002/03. Mid parent heterosis for grain yield was found in three hybrids and two of these showed high parent heterosis. High parent heterosis in Hyno Esta over a range of sowing densities was mostly exhibited in total biomass but also, in one of two years, in harvest index. High parent heterosis in Hyno Renta was associated more with harvest index than with biomass. The heterosis for biomass in Hyno Esta resulted from greater interception of photosynthetically active radiation (PAR) than the male parent, with better radiation use efficiency than the female parent. In both seasons Hyno Esta achieved grain numbers per ear at least as high as the high parent for this trait (Audace), and combined this with mean grain weights at least as heavy as the high parent for mean grain weight (Estica). Much of the increased biomass and grain yield in the hybrid came late in the season as high parent heterosis was expressed for both maximum grain filling rate and grain filling duration. Heterosis was higher when nitrogen was applied than when withheld; only greater at lower seed rates when expressed in proportionate terms (e.g. as a percentage of the parents), rather than in absolute terms (e.g. t ha(-1)); and greater in the year with the cooler and wetter summer.

Nitrogen fertilizer and seed rate effects on Hagberg failing number of hybrid wheats and their parents are associated with alpha-amylase activity, grain cavity size and dormancy

Field experiments were carried out to assess the effects of nitrogen fertilization and seed rate on the Hagberg falling number (HFN) of commercial wheat hybrids and their parents. Applying nitrogen (200 kg N ha(-1)) increased HFN in two successive years. The HFN of the hybrid Hyno Esta was lower than either of its parents (Estica and Audace), particularly when nitrogen was not applied. Treatment effects on HFN were negatively associated with a-amylase activity. Phadebas grain blotting suggested two populations of grains with different types of a-amylase activity: Estica appeared to have a high proportion of grains with low levels of late maturity endosperm a-amylase activity (LMEA); Audace had a few grains showing high levels of germination amylase; and the hybrid, Hyno Esta, combined the sources from both parents to show heterosis for a-amylase activity. Applying nitrogen reduced both apparent LMEA and germination amylase. The effects on LMEA were associated with the size and disruption of the grain cavity, which was greater in Hyno Esta and Estica and in zero-nitrogen treatments. External grain morphology failed to explain much of the variation in LMEA and cavity size, but there was a close negative correlation between cavity size and protein content. Applying nitrogen increased post-harvest dormancy of the grain. Dormancy was greatest in Estica and least in Audace. It is proposed that effects of seed rate, genotype and nitrogen fertilizer on HFN are mediated through factors affecting the size and disruption of the grain cavity and therefore LMEA, and through factors affecting dormancy and therefore germination amylase. (c) 2004 Society of Chemical Industry.

Change in the effect of constant photoperiods on the rate of sexual maturation in modern genotypes of domestic pullet

1. Data for modern egg-type hybrids reared on constant daylengths show that, as expected, they mature more quickly than earlier genotypes. However, the constant photoperiod which gives earliest sexual maturity has not changed as a result of selection and is 10 h for both early and modern genotypes. 2. Further analysis showed that the rate of delay in sexual maturity for constant photoperiods above 10 h is similar for modern and for early hybrids ( +0.29 d for each incremental one hour of photoperiod), the response of modern hybrids below 10 h ( +4.22 d for each one-hour reduction in photoperiod) is more than double that of early hybrids ( +1.71 d/h).

Potential economic impacts of terminator technologies: policy implications for developing countries

The terminator gene can render seeds sterile, so forcing farmers to purchase fresh seed every year. It is a technological solution to the problem of market failure that could increase the appropriability of R&D investment more effectively than intellectual property rights legislation or patents. This paper shows that appropriability should be more than tripled and that this leads to greater private R&D investment, which may be expected to double or triple. This would bring open-pollinating varieties into line with F1 hybrids, for which seed cannot be saved. In turn, the increased investment should raise yield increases to levels similar to those for hybrid crops. Thus, there are benefits to set against the possible ecological and environmental costs and the clear distributional and social consequences. The paper discusses the way the seed market is developing, the possible impacts, especially from a developing country viewpoint, and considers the policy changes that are needed.

Recent advances in the application of in vitro systems to plant improvement

The horticultural industry was instrumental in the early development and exploitation of genetic techniques over a century ago. This review will describe recent advances in a range of in vitro methods and their application to plant breeding, with especial emphasis on horticultural crops. These methods include improvements in the efficiency of haploid breeding techniques in many fruit and vegetable species using either microspore-derived or ovule-derived plants. Significant molecular information is now available to supplement these essentially empirical approaches and this may enable the more predictable application of these technologies in previously intransigent crops. Similarly there are now improved techniques for isolation of somatic hybrids, by application of either in vitro fertilisation or the culture of excised ovules from interspecific crosses. In addition to examples taken from the traditional scientific literature, emphasis will also be given to the use of patent databases as a valuable source of information on recent novel technologies developed in the commercial world.

Chemical characterisation of wild populations of Thymus from different climatic regions in southeast Spain

Thymus is taxonomically a very complex genus with a high frequency of hybridisation and introgression among sympatric species. The variation in accumulation of leaf-surface flavonoids was investigated in 71 wild populations of Thymus front different putative hybrid swarm areas in Andalucia, Spain. Twenty-two flavones, five flavanones, two dihydroflavonols, a flavonol and two unknowns were detected by HPLC-DAD combined with LC-APCI-MS analysis. The majority of compounds were flavones with a lutelin-type substitution of the B-ring, in contrast to previous reports on Macedonian taxa, which predominantly accumulate flavones with apigenin-type substitution of the B-ring. Anatomical and morphometric studies, supported by cluster analysis, identified pure Thymus hyemalis and Thymus baeticus populations, and a large number of putative hybrids. Flavonoid variation was closely related to morphological variation in all populations and is suspected to be a result of genetic polymorphism. Principal component analysis identified the presence of species-specific and geographically linked chemotypes and putative hybrids with mixed morphological and chemical characteristics. Qualitative and quantitative flavonoid accumulation appears to be genetically regulated, while external factors play a secondary role. Flavonoid profiles can thus provide diagnostic markers for the taxonomy of Thymus and are also useful in detecting hybridising taxa. (C) 2007 Elsevier Ltd. All rights reserved.

Spontaneous gene flow from rapeseed (Brassica napus) to wild Brassica oleracea

Research on the environmental risks of gene flow from genetically modified ( GM) crops to wild relatives has traditionally emphasized recipients yielding most hybrids. For GM rapeseed ( Brassica napus), interest has centred on the 'frequently hybridizing' Brassica rapa over relatives such as Brassica oleracea, where spontaneous hybrids are unreported in the wild. In two sites, where rapeseed and wild B. oleracea grow together, we used flow cytometry and crop-specific microsatellite markers to identify one triploid F-1 hybrid, together with nine diploid and two near triploid introgressants. Given the newly discovered capacity for spontaneous introgression into B. oleracea, we then surveyed associated flora and fauna to evaluate the capacity of both recipients to harm cohabitant species with acknowledged conservational importance. Only B. oleracea occupies rich communities containing species afforded legislative protection; these include one rare micromoth species that feeds on B. oleracea and warrants further assessment. We conclude that increased attention should now focus on B. oleracea and similar species that yield few crop-hybrids, but possess scope to affect rare or endangered associates.

Is there such a thing as Kalmia x Rhododendron?

Two putative hybrids between Kalmia and Rhododendron, their suspected progenitor species and related taxa were submitted to DNA sequencing of cpDNA trnL-F and nrDNA ITS regions in order to test whether there was DNA sequence evidence both for hybridization per se and for the direction of the cross should one be evident. Comparison of eight DNA sequences from these putative hybrids with Rhododendron and Kalmia species showed clear evidence of origin within Rhododendron. No evidence of Kalmia DNA was detected. These putative intergeneric hybrids appear to be mutants of Rhododendron and not of hybrid origin.

The chromosomal assessment of salt tolerant substituted tritipyrum using genomic fluorescent in situ hybridiization (FISH)

Wheat, although moderately tolerant to salt, can not be cultivated in many areas. However, in the triticeae tribe, some of the wild wheat relatives are highly tolerant, e.g. Thinopyrum bessarabicum, which grows on the sea shore. Eight primary hexaploid tritipyrum lines, amphiploids between Triticum durum and Thinopyrum bessarabicum have been produced which can set seed in at least 250 mM NaCl. These tritipyrums (2n=6x=42, AABBEbEb) due to reasons such as brittle rachis, continuous production of tillers, late maturity, tall stature and meiotic instability will not fulfill the requirements of a successful commercial salt tolerant crop. To overcome such problems the substituted tritipyrum, in which selected Eb chromosomes are replaced by D genome chromosomes of 6x wheat, was produced from 6x tritipyrum x 6x wheat hybrids (F1: 2n=6x=42, AABBDEb) followed by selfing and backcrossing with 6x tritipyrum. The fertile plants among the above progenies were screened by the genomic fluorescent in situ hybridization technique to identify their Eb and D chromosome constitution. This study showed that producing tritiprum with variable numbers of Eb and D genome chromosomes is feasible and that FISH is a useful technique for determining the number of Eb chromosomes present.

Molecular structures of 3-hydroxybenzoic acid and 4-hydroxybenzoic acid, obtained by gas-phase electron diffraction and theoretical calculations

The structures of 3-hydroxybenzoic acid and 4-hydroxybenzoic acid have been determined by gas-phase electron diffraction using results from quantum chemical calculations to inform the choice of restraints applied to some of the structural parameters. The results from the study presented here demonstrate that resonance hybrids are not as helpful in rationalizing the structures of 2-, 3-, and 4-hydroxybenzoic acids as are models based upon electrostatic effects.

Impact damage characterisation of thermoplastic matrix composites using transmission transient thermography

In this work, IR thermography is used as a non-destructive tool for impact damage characterisation on thermoplastic E-glass/polypropylene composites for automotive applications. The aim of this experimentation was to compare impact resistance and to characterise damage patterns of different laminates, in order to provide indications for their use in components. Two E-glass/polypropylene composites, commingled ®Twintex (with three different weave structures: directional, balanced and 3-D) and random reinforced GMT, were in particular characterised. Directional and balanced Twintex were also coupled in a number of hybrid configurations with GMT to evaluate the possible use of GMT/Twintex hybrids in high-energy absorption components. The laminates were impacted using a falling weight tower, with impact energies ranging from 15 J to penetration. Using IR thermography during cooling down following a long pulse (3 s), impact damaged areas were characterised and the influence of weave structure on damage patterns was studied. IR thermography offered good accuracy for laminates with thickness not exceeding 3.5 mm: this appears to be a limit for the direct use of this method on components, where more refined signal treatment would probably be needed for impact damage characterisation.

Impact properties of glass/plant fibre hybrid laminates

The use of plants fibre reinforced composites has continuously increased during recent years. Their low density, higher environmental friendliness, and reduced cost proved particularly attractive for low-tech applications e.g., in building, automotive and leisure time industry. However, a major limitation to the use of these materials in structural components is unsatisfactory impact performance. An intermediate approach, the production of glass/ plant fibre hybrid laminates, has also been explored, trying to obtain materials with sufficient impact properties, whilst retaining a reduced cost and a substantial environmental gain. A survey is given on some aspects, crucial for the use of glass/plant fibre hybrid laminates in structural components: performance of hybrids when subjected to impact testing; the effect of laminate configuration, manufacturing procedure and fibre treatment on impact properties of the composite. Finally, indications are provided for a suitable selection of plant fibres with minimal extraction damage and sufficient toughness, for introduction in an impact-resistant glass/plant fibre hybrid laminate.

Methods of producing haploid and doubled haploid oil palms

The present invention relates to haploid oil palm plants and homozygous doubled haploid oil palm plants. The invention also relates to methods for producing and selecting haploid and doubled haploid plants. More particularly, but not exclusively, the method may be used for selecting haploid and doubled haploid oil palm plants. Haploid and doubled haploid plants are selected by a large-scale screening based on a combination of the phenotype with the use of molecular methods combined with flow cytometry techniques to identify haploid and doubled haploid plants. More particularly, a method for selecting haploid and doubled haploid plants is described comprising: (a) germinating seeds; (b) selecting seedlings with atypical phenotype; (c) assessing heterozygosity using markers; (d) isolating cells from the seedlings and determining the DNA content of the cells; and (e) isolating and purifying the DNA and using defined molecular markers to characterise the genotype of the plant. The haploid oil palm plants may be used for producing homozygous doubled haploid oil palms: doubled haploids may be intercrossed to produce uniform F.sub.1 hybrids of superior properties.

Liquid crystal phase formation by biopolymers

This review discusses liquid crystal phase formation by biopolymers in solution. Lyotropic mesophases have been observed for several classes of biopolymer including DNA, peptides, polymer/peptide conjugates, glycopolymers and proteoglycans. Nematic or chiral nematic (cholesteric) phases are the most commonly observed mesophases, in which the rod-like fibrils have only orientational order. Hexagonal columnar phases are observed for several systems (DNA, PBLG, polymer/peptide hybrids) at higher concentration. Lamellar (smectic) phases are reported less often, although there are examples such as the layer arrangement of amylopectin side chains in starch. Possible explanations for the observed structures are discussed. The biological role of liquid crystal phases for several of these systems is outlined. Commonly, they may serve as a template to align fibrils for defined structural roles when the biopolymer is extruded and dried, for instance in the production of silk by spiders or silkworms, or of chitin in arthropod shells. In other cases, liquid crystal phase formation may occur in vivo simply as a consequence of high concentration, for instance the high packing density of DNA within cell nuclei.

Dynamics of shear-induced orientation transitions in block copolymers

This review discusses liquid crystal phase formation by biopolymers in solution. Lyotropic mesophases have been observed for several classes of biopolymer including DNA, peptides, polymer/peptide conjugates, glycopolymers and proteoglycans. Nematic or chiral nematic (cholesteric) phases are the most commonly observed mesophases, in which the rod-like fibrils have only orientational order. Hexagonal columnar phases are observed for several systems (DNA, PBLG, polymer/peptide hybrids) at higher concentration. Lamellar (smectic) phases are reported less often, although there are examples such as the layer arrangement of amylopectin side chains in starch. Possible explanations for the observed structures are discussed. The biological role of liquid crystal phases for several of these systems is outlined. Commonly, they may serve as a template to align fibrils for defined structural roles when the biopolymer is extruded and dried, for instance in the production of silk by spiders or silkworms, or of chitin in arthropod shells. In other cases, liquid crystal phase formation may occur in vivo simply as a consequence of high concentration, for instance the high packing density of DNA within cell nuclei.