The effect of chilling on the photosynthetic activity in coffee (Coffea arabica L.) seedlings. The protective action of chloroplastid pigments

Coffea arabica is considered to be sensitive to low temperatures, being affected throughout its entire life cycle. Injury caused by chilling (low temperatures above zero degree centigrade) is characterized primarily by inhibition of the photosynthetic process. The objective of this work was to evaluate the role of photosynthetic pigments in the tolerance of coffee (C. arabica L.) seedlings to chilling. The evaluation the photosynthetic activity was made by emission of Chl a fluorescence at room temperature (25°C) in vivo and in situ, using a portable fluorometer. The pigment content was obtained by extraction with 80% acetone, while estimation of membrane lipid peroxidation was determined by measuring the MDA content in leaf tissue extracts. The results indicated a generalized reduction in the quantum yield of PSII when the seedlings were maintained in the dark. The reduction occurred in the seedlings submitted to chilling treatment as well as in the control ones. This demonstrates that not only chilling acts to cause an alteration in PSII. It is possible that the tissue storage reserves had been totally exhausted, with the respiratory rate exceeding the photosynthetic rate; the later was nil, since the seedlings were kept in the dark. The efficiency in the capture, transfer and utilization of light energy in PS11 photochemical reactions requires a sequence of photochemical, biochemical and biophysical events which depend on the structural integrity of the photosynthetic apparatus. However, this efficiency was found to be related to the protective action of chloroplastid pigments, rather than to the concentration of these pigments.

External and internal structure of Atta bisphaerica Forel (Hymenoptera: Formicidae) nests

This work was carried out to determine the internal and external structures of Atta bisphaerica (Forel) nests. Six nests were excavated and during excavation, all data referring to chambers and tunnels were recorded. Three nests had been internally cement-moulded, which enabled a better view of the chamber and tunnel structures. Atta bisphaerica nests presented a similar structural pattern, varying only in the number of chambers as a function of external mound area. Chambers were spherical with two communication tunnels. Internal tunnels had an elliptical section, sometimes circular, indirectly linked to chambers through ramifications and directly through short tunnels. Entrance holes were linked to the area of highest chamber concentration by tunnels from the elliptical section, which led to the nest in a radial manner. Knowledge of the colony's three-dimensional architecture permits successful application of chemical control processes, reduces the quantity of product applied, and consequently diminishes costs and environmental damage.

Global analysis of aerodynamics deflectors efficiency in the grinding process

The conventional, grinding methods in some cases are not very efficient because the arising of thermal damages in the pieces is very common. Optimization methods of cutting fluid application in the grinding zone are essential to prevent thermal problems from interaction of the wheel grains with the workpiece. surface. The optimization can happen through the correct selection of the cut parameters and development of devices that eliminate air layer effects generated around the grinding wheel. This article will collaborate with the development of an experimentation methodology which allows evaluating, comparatively, the performance of the deflectors in the cutting region to minimize the air layer effect of the high speed of the grinding wheel. The air layers make the cutting fluid jet to dissipate in the machine. An optimized nozzle was used in order to compare the results with the conventional method (without baffles or deflectors) of cutting fluid application. The results showed the high eficciency of the deflectors or baffles in the finish results. Copyright © 2006 by ABCM.

Study of cutting forces on machinability properties of gray cast iron using new ceramics cutting tools

During gray cast iron cutting, the great rate of mechanical energy from cutting forces is converted into heat. Considerable heat is generated, principally in three areas: the shear zone, rake face and at the clearance side of the cutting edge. Excessive heat will cause undesirable high temperature in the tool which leads to softening of the tool and its accelerated wear and breakage. Nowadays the advanced ceramics are widely used in cutting tools. In this paper a composition special of Si3N4 was sintering, characterized, cut and ground to make SNGN120408 and applyed in machining gray cast iron with hardness equal 205 HB in dry cutting conditions by using digital controlled computer lathe. The tool performance was analysed in function of cutting forces, flank wear, temperature and roughness. Therefore metal removing process is carried out for three different cutting speeds (300 m/min, 600 m/min, and 800 m/min), while a cutting depth of 1 mm and a feed rate of 0.33 mm/rev are kept constant. As a result of the experiments, the lowest main cutting force, which depends on cutting speed, is obtained as 264 N at 600 m/min while the highest main cutting force is recorded as 294 N at 300 m/min.

Cutting performance of diamond coated Si3N4 tool during turning

Silicon nitride cutting tools have been used successfully for machining hard materials, like: cast irons, nickel based alloys, etc. However these cutting tools with diamond coating present little information on dry turning operations of gray cast iron. In the present work, Si3N4 square inserts was developed, characterized and subsequently coated with diamond for dry machining operations on gray cast iron. All experiments were conducted with replica. It was used a 1500, 3000, 4500 m cutting length, feed rate of 0.33 mm/rev and keeping the depth of cut constant and equal to 1 mm. The results show that wear in the tool tips of the Si3N4 inserts, in all cutting conditions, was caused by both mechanical and chemical processes. To understand the tool wear mechanisms, a morphological analysis of the inserts, after experiments, has been performed by SEM and optical microscopy. Diamond coated PVD inserts showed to be capable to reach large cutting lengths when machining gray cast iron. © (2010) Trans Tech Publications.

The role of multiple partners in a digestive mutualism with a protocarnivorous plant

Background and aimsThe protocarnivorous plant Paepalanthus bromelioides (Eriocaulaceae) is similar to bromeliads in that this plant has a rosette-like structure that allows rainwater to accumulate in leaf axils (i.e. phytotelmata). Although the rosettes of P. bromelioides are commonly inhabited by predators (e.g. spiders), their roots are wrapped by a cylindrical termite mound that grows beneath the rosette. In this study it is predicted that these plants can derive nutrients from recycling processes carried out by termites and from predation events that take place inside the rosette. It is also predicted that bacteria living in phytotelmata can accelerate nutrient cycling derived from predators.MethodsThe predictions were tested by surveying plants and animals, and also by performing field experiments in rocky fields from Serra do Cipó, Brazil, using natural abundance and enriched isotopes of 15N. Laboratory bioassays were also conducted to test proteolytic activities of bacteria from P. bromelioides rosettes.Key ResultsAnalyses of 15N in natural nitrogen abundances showed that the isotopic signature of P. bromelioides is similar to that of carnivorous plants and higher than that of non-carnivorous plants in the study area. Linear mixing models showed that predatory activities on the rosettes (i.e. spider faeces and prey carcass) resulted in overall nitrogen contributions of 26·5 % (a top-down flux). Although nitrogen flux was not detected from termites to plants via decomposition of labelled cardboard, the data on 15N in natural nitrogen abundance indicated that 67 % of nitrogen from P. bromelioides is derived from termites (a bottom-up flux). Bacteria did not affect nutrient cycling or nitrogen uptake from prey carcasses and spider faeces.ConclusionsThe results suggest that P. bromelioides derive nitrogen from associated predators and termites, despite differences in nitrogen cycling velocities, which seem to have been higher in nitrogen derived from predators (leaves) than from termites (roots). This is the first study that demonstrates partitioning effects from multiple partners in a digestion-based mutualism. Despite most of the nitrogen being absorbed through their roots (via termites), P. bromelioides has all the attributes necessary to be considered as a carnivorous plant in the context of digestive mutualism. © 2012 The Author. Published by Oxford University Press on behalf of the Annals of Botany Company. All rights reserved.

A survey of DNA methylation across social insect species, life stages, and castes reveals abundant and caste-associated methylation in a primitively social wasp

DNA methylation plays an important role in the epigenetic control of developmental and behavioral plasticity, with connections to the generation of striking phenotypic differences between castes (larger, reproductive queens and smaller, non-reproductive workers) in honeybees and ants. Here, we provide the first comparative investigation of caste- and life stage-associated DNA methylation in several species of bees and vespid wasps displaying different levels of social organization. Our results reveal moderate levels of DNA methylation in most bees and wasps, with no clear relationship to the level of sociality. Strikingly, primitively social Polistes dominula paper wasps show unusually high overall DNA methylation and caste-related differences in site-specific methylation. These results suggest DNA methylation may play a role in the regulation of behavioral and physiological differences in primitively social species with more flexible caste differences. © 2013 Springer-Verlag Berlin Heidelberg.

Influência in vitro da clorexidina e do chá verde na longevidade de união adesiva resina composta – dentina

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Padrões fenológicos em ecossistemas em processo de restauração e em fragmento florestal vizinho

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Dimensões do orifício de abastecimento e área real de sauveiros de atta sexdens rubropilosa (Hymenoptera: Formicidae), precisão dos métodos e implicações no controle com iscas formicidas

Pós-graduação em Ciência Florestal - FCA

Influência de aves e morcegos insetívoros no controle da herbivoria em sistemas agroflorestais de café

Pós-graduação em Biologia Animal - IBILCE

Filogenia molecular de Atta sexdens (Myrmicinae : Attini) e investigação de pseudogenes em formigas da tribo Attini

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Evolução do sistema reprodutivo de formigas da tribo Attini (Hymenoptera : myrmiciane): análise das espermatecas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Diversidade e composição de formigas Ponerines (Hymenoptera, Formicidae, Ponerinae) de Serapilheira na Estação Científica Ferreira Penna, Caxiuanã, Melgaço, Pará, Brasil

Inventários da mesofauna de solo e serapilheira em florestas tropicais apresentam a subfamíliaC (Hymenoptera, Formicidae) como uma das mais conspícuas e a segunda com maior riqueza e abundância, depois da subfamília Myrmicinae. Nestes ambientes, as ponerines constituem componentes ecologicamente importantes, onde são notáveis predadoras de outros invertebrados e podem nidificar nos troncos em decomposição ou na serapilheira. Este estudo foi realizado com a intenção de investigar a distribuição espacial das espécies de formigas da subfamília Ponerinae associadas à serapilheira, considerando sua abundância, riqueza, diversidade e composição, em seis áreas de floresta primária (Áreas I, II, III, IV, V e VI) na Estação Científica Ferreira Penna (ECFPn), Caxiuanã, Melgaço, Pará; e como a quantidade de serapilheira influencia nessa distribuição. Este estudo resulta de três coletas realizadas pelo Protocolo de Monitoramento de Formigas do Projeto TEAM/Caxiuanã entre abril de 2003 e janeiro de 2004. Coletaram-se 720 sub-amostras de 1 m² de serapilheira, distribuídas em 72 transectos de 100 m (unidade amostral) entre as seis áreas durante as coletas (quatro transectos por área em cada coleta), utilizando extratores de mini-Winkler. Identificaram-se 4.031 exemplares, pertencentes às três tribos, oito gêneros e 60 espécies de Ponerinae em 470 registros, sendo que o número médio de espécies por amostra foi de 6,52, e estimou-se encontrar 81 espécies (Jackknife 1). Hypoponera foi o gênero com maior abundância (268 registros) e riqueza de espécies (22), compreendendo junto com Pachycondyla mais de 70% das espécies. A Área V apresentou maior diversidade (H= 3,30), abundância (121) e riqueza (38) em espécies, além de maior volume de serapilheira (ANOVA; p<0,05 entre a Área V e as demais). A quantidade de serapilheira afetou positivamente a abundância e a riqueza de espécies, e também influenciou na composição de espécies. As espécies mais freqüentes (abundantes) nas amostras foram Hypoponera sp#1, Hypoponera sp#2, Hypoponera sp#6, Hypoponera sp#7, dontomachus scalptus e Pachycondyla constricta, que juntas representaram mais de 50% da abundância total. No geral, as ponerines apresentaram ampla distribuição na serapilheira de floresta primária na ECFPn, sendo numericamente influenciadas pela quantidade de serapilheira; as áreas apresentaram diferenças na diversidade, abundância e riqueza das espécies encontradas; e, como efeito do elevado número de espécies raras, encontrou-se baixa similaridade na composição de espécies entre amostras próximas; logo, mesmo em pequena escala, a heterogeneidade da camada de serapilheira na floresta amazônica tem importante papel na distribuição das espécies.

A riqueza das formigas relacionada aos períodos sazonais em Caxiuanã durante os anos de 2006 e 2007

A variabilidade temporal da fauna de formigas coletadas em Caxiuanã -PA, durante o protocolo de formigas de serrapilheira do Projeto TEAM/Caxiuanã , foram estudadas a partir das condições meteorológicas locais observadas nos meses de janeiro a abril (estação chuvosa), e julho a outubro (estação menos chuvosa), para os anos de 2006 e 2007. Para isso, foram utilizados dados meteorológicos da torre micrometeorológica de Caxiuanã . Durante a estação chuvosa, notou-se o predomínio de elevados valores de precipitação e umidade do solo, e baixas temperaturas do ar. Na estação menos chuvosa, observou-se comportamento oposto ao período chuvoso. Em geral, observou-se que a frequência de formigas é maior quando há redução da precipitação e da umidade do solo; e do aumento da temperatura do ar. Os gêneros das formigas Crematogaster, Hypoponera, Pheidole e Solenopsis apresentaram maior quantidade de indivíduos. Percebeu-se ainda, que as correlações estatísticas com função polinomial de segunda ordem, entre as variáveis atmosféricas e a frequência de formigas, mostram claramente que estas ocorrem de modo inverso com a precipitação e a umidade do solo, e direta com a temperatura do ar. Assim, os resultados deste estudo corroboram a alta variação da abundância dos quatro gêneros de formigas supracitados, em função das variáveis atmosféricas em áreas tropicais.