Bud source, asepsis and benzylaminopurine (BAP) effect on yacon (Polymnia sonchifolia) micropropagation

The yacon (Polymnia sonchifolia) is used largely for the high fructan content of its tubers; consequently, it is a good alternative for diabetics. One of the more important restricting factors of the commercial production of yacon is its susceptibility to nematode attack. This, as well as germplasm bank maintenance, justifies the importance of in vitro propagation of this species. In this way, our work aimed to verify the best asepsis method for yacon for the in vitro establishment from the rhizophore and the axillary buds of the aerial parts, and the effect of benzylaminopurine (BAP) addition to the culture medium. The number of contaminated cultures, the occurrence of phenolic oxidation and the occurrence of a vitreous aspect, showed differences with bud source, immersion time for asepsis, and BAP use. The results contribute to establishing a yacon micro propagation procedure.

Sorption isotherm, glass transitions and state diagram for freeze-dried plum skin and pulp

Differential scanning calorimetry (DSC) was used to determine phase transitions of freeze-dried plums. Samples at low and intermediate moisture contents, were conditioned by adsorption at various water activities (0.11≤a w≤0.90) at 25°C, whereas in the high moisture content region (a w>0.90) samples were obtained by direct water addition, with the resulting sorption isotherm being well described by the Guggenheim-Anderson-deBoer (GAB) model. Freeze-dried samples of separated plum skin and pulp were also analysed. At a w≤0.75, two glass transitions were visible, with the glass transition temperature (T g) decreasing with increasing a w due to the water plasticising effect. The first T g was attributed to the matrix formed by sugars and water. The second one, less visible and less plasticised by water, was probably due to macromolecules of the fruit pulp. The Gordon-Taylor model represented satisfactorily the matrix glass transition curve for a w≤0.90. In the higher moisture content range T g remained practically constant around T g′ (-57.5°C). Analysis of the glass transition curve and the sorption isotherm indicated that stability at a temperature of 25°C, would be attained by freeze dried plum at a water activity of 0.04, corresponding to a moisture content of 12.9% (dry basis). © 2006 SAGE Publications.

PTCa/PEEK composite acoustic emission sensors

Composites made of Calcium-modified lead titanate (PTCa) and poly (ether-etherketone) (PEEK) high performance polymer matrix were prepared in the film form using a hot press. The ceramic volume fraction reaches up to 60 percent providing a composite with 0-3 and 1-3 mixed connectivities due to the high ceramic content and the resulting materials could be considered PEEK-bonded PTCa particulate composite. The composites were characterized using piezoelectric spectroscopy and ultrasonic immersion techniques. Values up to 38.5 pC/N were obtained for the longitudinal d33 piezoelectric coefficient. The composite was surface-mounted on a carbon fiber plate-like specimen and the ability of the PTCa/PEEK composite to detect acoustic emission (AE) is reported. © 2006 IEEE.

Planejamento agrícola e implantação de sistema de cultivo de cana-de-açúcar com auxílio de técnicas geoestatísticas

Sugarcane is one of the most important crops of the Brazilian agribusiness and this importance justifies the use of techniques that allow the implementation of cultivation systems capable of reducing the variability of soil characteristics and the establishment of efficient agricultural planning. The aim of the present work was the planning and implementation of cultivation systems for sugarcane using geostatistical techniques, in the Pereira Barreto region, SP. An area of 505 ha was mapped using the global positioning system (GPS) and a Digital Elevation Model was elaborated (MDE). Soil samples were collected for 0-0.25 m depth, in each 7 ha, for their chemical attributes and texture characterization. Data were analyzed by descriptive statistics and geostatistics. The determination of the spatial distribution of soil granulometric and chemical attributes allowed the allocation of the studied sugarcane varieties according to soil fertility and clay content. The kriging maps of soil granulometric and chemical attributes brought useful information to the establishment of production environments with different soil and crop managements. The identification of different environments by means of geostatistical techniques allowed the precise planning of the sugarcane cultivation, as well as the adequacy of fertilization practices and the allocation of suitable sugarcane varieties adapted to the conditions imposed by differences in the soil attributes.

Litogeoquímica E aspectos Petrogenéticos dos basaltos da Província Magmática do Paraná na porção centro-norte do Estado de São Paulo

The petrographic and geochemical characterization of flood basalts of Serra Geral Formation are here presented. The investigated areas are situated in four different regions of São Paulo state: Jaú, Ribeirão Preto, Franca and Fernandópolis. They represent almost the total area of outcrops of basalts in the São Paulo State. The petrographical data reveals that these rocks are constituted mainly by plagioclase (30-40%), pyroxenes, augite and pigeonita (20-30%) and magnetite (5-15%), and show a intergranular texture and its varieties intersertal, hialophitic and pilotaxitic. The geochemical data show a basic and tholeiitic affinity of the studied basalts, with high-Ti content (TiO2 > 1.8%), typical of the northern region of Paraná Basin. Three different magma-types were recognized: Paranapanema, Urubici and Pitanga. The first magma-type is concentrated in the Fernandópolis region, the second in the Franca region, and the Pitanga occurs in the Ribeirão Preto and Jaú regions. The distribution patterns of these magma-types and the detailed study of geochemical data showed that they are, probably, generated by a melting of a continental lithospheric mantle.

Microstructural characterization of layers produced by plasma nitriding on austenitic and superaustenitic stainless steel grades

High chromium content is responsible for the formation of a protective passive surface layer on austenitic stainless steels (ASS). Due to their larger amounts of chromium, superaustenitic stainless steels (SASS) can be chosen for applications with higher corrosion resistance requirements. However, both of them present low hardness and wear resistance that has limited their use for mechanical parts fabrication. Plasma nitriding is a very effective surface treatment for producing harder and wear resistant surface layers on these steel grades, without harming their corrosion resistance if low processing temperatures are employed. In this work UNS S31600 and UNS S31254 SASS samples were plasma nitrided in temperatures from 400 °C to 500 °C for 5 h with 80% H 2-20% N2 atmosphere at 600Pa. Nitrided layers were analyzed by optical (OM) and transmission electron microscopy (TEM), x-ray diffraction (XRD), and Vickers microhardness testing. Observations made by optical microscopy showed that N-rich layers were uniform but their thicknesses increased with higher nitriding temperatures. XRD analyses showed that lower temperature layers are mainly composed by expanded austenite, a metastable nitrogen supersaturated phase with excellent corrosion and tribological properties. Samples nitrided at 400 °C produced a 5 μm thick expanded austenite layer. The nitrided layer reached 25 lm in specimens treated at 500 °C. There are indications that other phases are formed during higher temperature nitriding but XRD analysis was not able to determine that phases are iron and/or chromium nitrides, which are responsible for increasing hardness from 850 up to 1100 HV. In fact, observations made by TEM have indicated that formation of fine nitrides, virtually not identified by XRD technique, can begin at lower temperatures and their growth is affected by both thermodynamical and kinetics reasons. Copyright © 2012 by ASTM International.

Doses de zinco e nitrogênio na produtividade e qualidade de grãos de ervilha

Peas present a potential to be cultivated in the winter, in Brazil, and also a great importance, especially in human feeding, due to its high protein content. However, its yield is still low and there are just a few studies aiming at improving pea grains quality and yield. This study aimed at evaluating the nitrogen and zinc fertilization effect on the pea grains (Utrillo cultivar) chemical quality and yield. The experiment was carried out in a dystrophic clayey Latosol-Haplustox, in Selvíria, Mato Grosso do Sul State, Brazil, in 2005. A randomized blocks design was used, in a 4×4 factorial scheme, totaling 16 treatments and 3 replications, including four nitrogen doses (0 kg ha-1, 60 kg ha-1, 120 kg ha-1, and 240 kg ha-1), as urea, via ground, at 30 days after sowing (DAS), and four zinc doses (0 kg ha-1, 1,5 kg ha-1, 3 kg ha-1, and 6 kg ha-1), as zinc sulphate, via leaf, at 45 DAS. The combination of zinc and nitrogen doses improved the grains chemical quality. Zinc had no effect on grain yield, however, high nitrogen doses negatively affected yield.

Food selection by a mangrove crab: Temporal changes in fasted animals

The feeding choices of the mangrove crab Ucides cordatus for various mangrove plant leaves (Avicennia schaueriana, Laguncularia racemosa, and Rhizophora mangle) at different ages (mature, senescent pre-abscission, and decomposing leaves) were examined. In a controlled experiment set in a mangrove area, we evaluated crab selection for different plant leaves by analyzing foraging rate (number of leaves with predation marks) and leaf consumption. Crabs were housed individually in plastic containers and after a 3-day fast supplied with leaf fragments every 24 h for 72 h. Uneaten leaves were removed before each new food offering. No food selection was observed in the first day, but after this period, senescent leaves, which have a high polyphenol content, were rejected. On the third day, an interactive effect between plant species and leaf age was shown to affect leaf selection, with mature leaves of A. schaueriana and L. racemosa being more selected than the other treatments. This observation was consistent across crab sexes and ages. Our results show that food selection by this mangrove crab changes through time in fasted animals, suggesting that this variable must be controlled in food preference studies. © 2012 Springer Science+Business Media B.V.

The Cuban economy

Includes bibliography

Correlação espacial do índice de vegetação (NDVI) de imagem Landsat/ETM+ com atributos do solo

The precision agriculture technologies such as the spatial variability of soil attributes have been widely studied mostly with sugarcane. Among these technologies have been recently highlighted the use of the vegetation index derived from remote sensing products, such as powerful tools indicating the development of vegetation. This study aimed to analyze the spatial variability of clay content, pH and phosphorus in an Oxisol in an area with sugarcane production, and correlate with the Normalized Difference Vegetation Index (NDVI). The georeferenced grid was created for the soil properties (clay, phosphorus and pH) and generated the maps of spatial variability. For these same sites were calculated the NDVI, in addition to mapping of this ratio, the evaluation of the spatial correlation between this and other studied properties. The clay and phosphorus content showed positive spatial correlation with the NDVI, while no spatial correlation was observed between NDVI and pH. The satellite images from the sensor ETM + Landsat were used to correlate to NDVI to observe the spatial variability of the studied attributes.

Experimental study of bottom feed updraft gasifier

The updraft biomass gasifiers currently available produce a gas with high tar content. For almost all downstream applications a substantial reduction of the tar concentration is required. The gravimetric tar concentration behavior in producer gas, obtained at a modified updraft fixed bed gasifier, was studied. The feedstock feeding system was modified respect to the traditional updraft gasification design in order to decrease the tar concentration in the producer gas; the material is feeding continuously through a conduit in the base of the reactor over the grate. The caloric power of the syngas obtained was slightly lower than the typical value for this type of reactor and the highest efficiency obtained for the woodchip gasification was 77%. The highest tar concentration obtained during the experiments was 1652.7 mg N m-3 during the first our of experiments, comparable with the smaller value reported for the updraft reactors, this value is reduced significantly after the stabilization of the gasification process in the reactor. The smaller value obtained was 21 mg N m-3. © 2013 Elsevier Ltd.

Suscetibilidade magnética do solo e estimação da capacidade de suporte à aplicação de vinhaça

The objective of this work was to evaluate the magnetic susceptibility efficiency for estimating the support capacity of areas for vinasse application. Two hundred forty-one soil samples were collected from a 380-ha area, on which soil chemical properties, clay content, and magnetic susceptibility were determined. Vinasse requirement was calculated for each sample. Data were subjected to descriptive statistical analysis, and regression models were developed between magnetic susceptibility and the other evaluated attributes. The analysis of data spatial dependence was performed using geostatistics. Kriging maps and cross variograms were built in order to investigate the spatial correlation between soil magnetic susceptibility and studied attributes. Based on the map of vinasse requirement, on the soil classes, and on the kriging map, calculations were done for average vinasse dose and average soil support capacity, weighted by the area. Magnetic susceptibility has significant linear spatial correlation with recommended vinasse doses and soil support capacity for the application of this effluent, and it can be used as a pedotransfer function for indirect quantification of soil support capacity.

Uso de fitorreguladores e efeitos no florescimento de plantas de pinhão-manso e na maturidade fisiológica das sementes

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Ácaros associados à Jatropha spp. (Euphorbiaceae) no Brasil

Pós-graduação em Biologia Animal - IBILCE

Influência de fragmentos florestais nativos sobre os parâmetros químicos, físicos e microbiológicos de solos cultivados com cana-de-açúcar

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)