Seletividade de herbicidas: III - aplicação de herbicidas em pós emergência inicial e tardia da cana-de-açúcar na época da estiagem

Este trabalho objetivou avaliar a seletividade dos herbicidas diuron+hexazinone, azafenidin+hexazinone, metribuzin e isoxaflutole aplicados em pós-emergência inicial e tardia das plantas de cana-de-açúcar, variedade RB835089, na época da estiagem, em soqueira de quarto corte, após colheita com queima prévia do canavial, em Araras, SP. O delineamento experimental foi o de blocos casualizados com testemunhas pareadas, com cinco tratamentos e quatro repetições, existindo uma testemunha capinada para cada tratamento químico dentro de cada bloco. Os tratamentos foram: diuron+hexazinone (1.170+330 g ha-1), azafenidin+ hexazinone (192,5+247,5 g ha-1), metribuzin (1.920 g ha-1), isoxaflutole (127,5 g ha¹) e testemunha capinada. Concluiu-se que os herbicidas foram mais fitotóxicos quando aplicados na pós-emergência tardia. em pós-emergência inicial, as plantas recuperaram-se totalmente dos efeitos fitotóxicos dos herbicidas. Na pós-emergência tardia, azafenidin+hexazinone, isoxaflutole e diuron+hexazinone prejudicaram o índice de fluorescência e a produtividade agrícola.

Seletividade de herbicidas: II - aplicação de herbicidas em pós-emergência inicial e tarida da cana-de-açúcar na época das chuvas

Objetivou-se com este trabalho testar a seletividade dos herbicidas diuron+hexazinone, azafenidin+hexazinone, metribuzin e isoxaflutole, aplicados em pósemergência inicial e tardia das plantas de cana-de-açúcar, cultivar RB835089, na época das chuvas, em soqueira de terceiro corte, após colheita com queima prévia do canavial, em Araras-SP. O delineamento experimental foi o de blocos casualizados com testemunhas pareadas, com cinco tratamentos e quatro repetições, existindo uma testemunha capinada para cada tratamento químico dentro de cada bloco. Os tratamentos foram: diuron+hexazinone (1.170+330 g ha-1), azafenidin+hexazinone (192,5+247,5 g ha-1), metribuzin (1.920 g ha-1), isoxaflutole (127,5 g ha-1) e testemunha. Concluiu-se que os herbicidas foram mais fitotóxicos quando aplicados na pós-emergência tardia. em pós-emergência inicial, o isoxaflutole foi o único produto que afetou a produtividade agrícola. Na pós-emergência tardia, todos os herbicidas prejudicaram a produtividade agrícola, sendo o diuron+hexazinone o único produto que não afetou as características tecnológicas e o rendimento de açúcar.

Caracterização morfológica de frutos e sementes e desenvolvimento pós-seminal de monjoleiro (Acacia polyphylla DC.)

Acacia polyphylla DC. é uma espécie arbórea, característica dos estádios iniciais da sucessão secundária, de ocorrência natural no Brasil. Pertence à família Leguminosae-Mimosoideae, sendo recomendada em programas de reflorestamento misto, recuperação de áreas degradadas e manejo de fragmentos florestais. Entretanto, não foi encontrado nenhuma referência que fizesse menção aos aspectos químicos e morfológicos das sementes, bem como, aos aspectos do desenvolvimento pós-seminal desta espécie. Assim sendo, o presente trabalho objetivou caracterizar morfologicamente e ilustrar frutos e sementes, quantificar alguns componentes químicos presentes nas sementes e descrever as diferentes fases do desenvolvimento pós-seminal. Para tanto, foram realizadas descrições associadas às estruturas externa e interna das sementes. As descrições morfológicas dos frutos e das sementes foram efetuadas em relação a forma, ao tamanho, a superfície, a micrópila e a forma e a localização do embrião. Para a descrição morfológica das plântulas, as sementes foram colocadas para germinar em meio de cultura Murashige & Skoog reduzido à metade da concentração e incubadas a temperatura de 25ºC, sendo descritas e ilustradas as plântulas normais e anormais. O fruto é uma vagem deiscente contendo de oito a 16 sementes achatadas, de tegumento testal, embrião axial e invaginado. A germinação das sementes é epígea e as plântulas fanerocotiledonares.

Automedicação e guarda de medicamentos por universitários das áreas de saúde e tecnologia

This study aimed to compare self-medication and domestic drug storage among undergraduate students in the areas of health and technology. This is a descriptive study of cross-sectional type and quantitative approach, conducted in a Public University of Natal, Rio Grande do Norte, Brazil. The sample consisted of 300 students of the third year of undergraduate courses at the Center for Health Sciences and Technology Center, selected through a simple random sample. The project was authorized by the Ethics Committee of Federal University of Rio Grande do Norte (CAAE 0137.0.051.000-10). Data collection lasted twelve months and was conducted during the period of study participants, in the university environment. The instrument for data collection was a structured questionnaire consisting of open and closed questions. For data analysis, we used descriptive statistics and applied Fisher s exact test and Chi-square test with adopted level of significance α=5% and 10%. For the variables that correlated with self-medication (p<0.05), we subsequently calculated the odds ratios and confidence intervals. The prevalence of undergraduate students who performed self-medication in the 15 days prior to the collection accounted for 33.7% and, by analyzing each knowledge area, we verified was a higher prevalence of self-medication among students in the technological area (37.3%). The analysis of the socio-demographic characteristics of the participants in this practice revealed a significant difference between the knowledge areas in the income and self-medication variables (p=0.005). General analgesics and antipyretics (N02) represent the therapy group most used in self-medication (57.4%), especially acetaminophen (28.7%), and the main health situations that motivated this practice related to pain, especially headaches (48.5%). Regarding the indication of the drugs used, the majority of students self-medicated themselves on their own (71.3%). As regards to the in-home drug storage, most of the participants had a home pharmacy (88%). By analyzing the socioeconomic characteristics, the variables medical service and home medicine presented a significant difference (p=0.002). General 10 analgesics and antipyretics constituted the medicinal products most found in the home pharmacies, especially acetaminophen. The main room used for the drug storage was the kitchen (36.4%), most students kept these products in boxes of different materials (38.6%) and the medicines stored at home of most of the participants were not easily accessible to children (75%). The results reinforce the need to develop strategies, from the reality found, aiming to encourage and implement educational and preventive activities with undergraduate students on the importance of proper self-medication and in-home drug storage. Despite the sample in our study is relatively small, not representative for the whole country, we believe that, at national level, the panorama of the subject does not present major differences

Uma perspectiva de extensão do modelo de aceitação de tecnologia para explicar o uso de linguagens de desenvolvimento WEB: pesquisa com desenvolvedores Pyton e Java

The spread of the Web boosted the dissemination of Information Systems (IS) based on the Web. In order to support the implementation of these systems, several technologies came up or evolved with this purpose, namely the programming languages. The Technology Acceptance Model TAM (Davis, 1986) was conceived aiming to evaluate the acceptance/use of information technologies by their users. A lot of studies and many applications have used the TAM, however, in the literature it was not found a mention of the use of such model related to the use of programming languages. This study aims to investigate which factors influence the use of programming languages on the development of Web systems by their developers, applying an extension of the TAM, proposed in this work. To do so, a research was done with Web developers in two Yahoo groups: java-br and python-brasil, where 26 Java questionnaires and 39 Python questionnaires were fully answered. The questionnaire had general questions and questions which measured intrinsic and extrinsic factors of the programming languages, the perceived usefulness, the perceived ease of use, the attitude toward the using and the programming language use. Most of the respondents were men, graduate, between 20 and 30 years old, working in the southeast and south regions. The research was descriptive in the sense of its objectives. Statistical tools, descriptive statistics, main components and linear regression analysis were used for the data analysis. The foremost research results were: Java and Python have machine independence, extensibility, generality and reliability; Java and Python are more used by corporations and international organizations than supported by the government or educational institutions; there are more Java programmers than Python programmers; the perceived usefulness is influenced by the perceived ease of use; the generality and the extensibility are intrinsic factors of programming languages which influence the perceived ease of use; the perceived ease of use influences the attitude toward the using of the programming language

Fonte de energia alternativa: um estudo sobre a percepção ambiental, social e econômica do biodiesel com docentes do Centro de Tecnologia do gás da cidade de Natal RN

Meaning fuel and renewal energy source s derivative additives, the term biodiesel exists in Brazil since 1980, when it was signed its first patent by Expedito Parente. Since then, its importance has grown gradually due to the worsening of the ambient problems, since its use has became a highly promising alternative to the pollution decrease, as in the carbon dioxide issue as with the smoke and sulfur oxide. In Brazil, it was created the National Program of Production, whose objective is to insert the new product in the country s energy matrix, strengthening the economy and creating new employment opportunities, being an important product to the national energetic independence, since Brazil still imports diesel to its domestic consumption. This study aims to identify the ambient, social and economic perception of the teachers from the Technology Center of Natal city (CTGÁS-RN) to the biodiesel. For that, it was used a questionnaire closed questions, organized in the likart scale, directed to the tree spheres of the research analysis, the biodiesel and its social, ambient and economic nuances, totaling 31 questionnaires full answered. In its objectives, the research was descriptive and in its approach it was qualitative. To the data analysis it was used statistical tools (Statistic software, 6.1 version and Microsoft Excel 2003). The research revealed the predominance of the ambient aspect in the sight of the teachers, followed by the social ones. The economic factors represent a minor percentage in the analysis when compared to other

Fatores influenciadores da implementação de ações de gestão de segurança da informação :um estudo com executivos e gerentes de tecnologia da informação das empresas do Rio Grande do Norte

Information is one of the most valuable organization s assets, mainly on a global and highly competitive world. On this scenery there are two antagonists forces: on one side, organizations struggle for keeping protected its information, specially those considered as strategic, on the other side, the invaders, leaded by innumerous reasons - such as hobby, challenge or one single protest with the intention of capturing and corrupting the information of other organizations. This thesis presents the descriptive results of one research that had as its main objective to identify which variables influence the Executives´ and CIOs´ perceptions toward Information Security. In addition, the research also identified the profile of Rio Grande do Norte s organizations and its Executives/CIOs concerning Information Security, computed the level of agreement of the respondents according to NBR ISO/IEC 17799 (Information technology Code of practice for information security management) on its dimension Access Control. The research was based on a model, which took into account the following variables: origin of the organization s capital, sector of production, number of PCs networked, number of employees with rights to network, number of attacks suffered by the organizations, respondent´s positions, education level, literacy on Information Technology and specific training on network. In the goal´s point of view, the research was classified as exploratory and descriptive, and, in relation of the approach, quantitative. One questionnaire was applied on 33 Executives and CIOs of the 50 Rio Grande do Norte s organizations that collected the highest taxes of ICMS - Imposto sobre Circulação de Mercadorias on 2000. After the data collecting, cluster analysis and chi-square statistical tools were used for data analysis. The research made clear that the Executives and CIOs of Rio Grande do Norte s organizations have low level of agreement concerning the rules of the NBR ISO/IEC 17799. It also made evident that the Executives and CIOs have its perception toward Information Security influenced by the number of PCs networked and by the number of attacks suffered by the organizations

Terceirização em tecnologia da informação sob os aspectos de estratégia, tomada de decisão e análise de investimentos :estudo de múltiplos casos em três organizações franqueadas da Coca-Cola do Brasil

Desde a criação da tecnologia e do seu uso pelas empresas, a relação custo e benefício nem sempre foi bem elucidada tanto para os responsáveis pela área de tecnologia quanto para a alta direção. Mas, apesar disto, cada vez mais as organizações investem maciçamente em tecnologia, esperando que esta seja a solução para diversos problemas. Por isto, esta questão tem se tornado crucial para o processo de tomada de decisões, visto que investimentos nesta área costumam ser dispendiosos e, na atual conjuntura, estas análises precisam ser extremamente criteriosas para que se miniminizem as possibilidades de insucesso dos projetos, principalmente numa economia estabilizada e de concorrência acirrada. Uma das alternativas que as empresas têm buscado para atingir o sucesso e correr menos riscos é a terceirização da área de TI. Partindo desta visão, a presente dissertação tem por objetivo realizar uma investigação sobre a terceirização dos serviços de TI em todos os seus aspectos, isto é, desde a sua motivação, serviços efetivamente terceirizados, vantagens, desvantagens e possíveis obstáculos, a visão do alinhamento estratégico da TI, os processos de gestão de contratos e formas de controle e, por fim, tendências futuras. Trata-se de uma pesquisa de múltiplos casos, envolvendo franquias do Sistema Coca-Cola no Brasil. O estudo apresenta uma pesquisa bibliográfica sobre o processo de tomada de decisão empresarial, a análise de investimentos, a gestão e a terceirização da TI, o que permitem definir as dimensões de análise da pesquisa. Na pesquisa de campo foram entrevistados os gerentes da área de TI, nas cidades de Brasília-DF, Goiânia-GO e Ribeirão Preto-SP. A pesquisa de campo permitiu identificar como as mesmas avaliam seus investimentos em TI, como esta área é gerenciada, o que as levou a optar pela terceirização e como os processos terceirizados afetam a organização. Por se tratar de uma pesquisa qualitativa, optou-se por analisar comparativamente as três organizações. Com a realização deste estudo, obtiveram-se, como principais resultados, que as organizações estão utilizando a terceirização em TI para focar no negócio principal e, mesmo encontrando diversas desvantagens, inclusive com relação a custos, acreditam que os benefícios justificam. Ainda identificaram-se alguns obstáculos internos para a terceirização, principalmente quanto ao receio de se perder a inteligência do negócio. O acompanhamento dessas atividades terceirizadas é realizado pela equipe interna e por critérios estruturados, onde se verificam os níveis de serviço

e-Pontos: Uma solução embarcada de automação comercial aplicada a clubes de fidelidade baseado em tecnologia RFID e esmart card

In practically all vertical markets and in every region of the planet, loyalty marketers have adopted the tactic of recognition and reward to identify, maintain and increase the yield of their customers. Several strategies have been adopted by companies, and the most popular among them is the loyalty program, which displays a loyalty club to manage these rewards. But the problem with loyalty programs is that customer identification and transfer of loyalty points are made in a semiautomatic. Aiming at this, this paper presents a master's embedded business automation solution called e-Points. The goal of e-Points is munir clubs allegiances with fully automated tooling technology to identify customers directly at the point of sales, ensuring greater control over the loyalty of associate members. For this, we developed a hardware platform with embedded system and RFID technology to be used in PCs tenant, a smart card to accumulate points with every purchase and a web server, which will provide services of interest to retailers and customers membership to the club

Estudo e especificação de um sistema de instrumentação para unidades de elevação de petróleo utilizando tecnologia sem fio

Wireless sensor networks are reality nowadays. The growing necessity of connectivity between existing industrial plant equipments pushes the research and development of several technologies. The IEEE 802.15.4 LR-WPAN comes as a low-cost and powersaving viable solution, which are important concerns while making decisions on remote sensoring projects. This study intends to propose a wireless communication system which makes possible the monitoring of analogic and/or digital variables (i. e., the pressure studied) involved on the artificial methods for oil and gas lifting. The main issues are: To develop a software based on SMAC Standard in order to create a wireless network to monitoring analogic and/or digital variables; To evaluate the communication link based on the number of lost packets tested in different environments (indoor and outdoor) and To propose an instrumentation system consisting of wireless devices

Desenvolvimento de um protótipo para alimentação de pós para aspersão térmica em tocha de plasma

The nanometric powders have special features that usually result in new properties, originating applications or expanding them in various fields of knowledge. Because having a high area/volume ratio, phenomena such as superficial strength of adsorption becomes greater than the weight of the powder which makes more difficult its handling. The high power of agglomeration of these powders requires study and development of equipments to enable its management into the plasma torch. The objective of this work is to develop a powder feeder which can solve the mainly problems about insertion of powder into the thermal spray developed in the laboratory of plasmas, which are carried out with plasma torch arc not transferred (plasma spray). Therefore, it was made a aluminum s powder feeder and tests were performed to verify their operation and determine its rate of deposition by spraying powders of niobium pentoxide (Nb2O5) and titanium dioxide (TiO2) with particle sizes less than 250 mesh (<0.063 mm). We used masses of 0.5 g - 1.0 g and 1.5 g of each powder in tests lasting 15 seconds - 20 to 25 seconds for each mass. The tests were performed in two ways: at atmospheric pressure using argon gas with a flow of 9 l / min as carrier gas and through a Venturi pipe also using argon gas with a flow of 9 l / min as carrier gas and with a flow of 20 l/min as the feed gas passing through the Venturi pipe. The powder feeder developed in this paper is very easy to be handling and building, resulting in feeding rate of 0.25 cm3/min - 1.37 cm3/min. The TiO2 showed higher feeding rates than the Nb2O5 in all tests, and the best rates were obtained with tests using mass 1.5 g and time of 15 seconds, reaching feeding rate of 1.37 cm3/min. The flow of feed had low interference in feeding rate during the tests

Obtenção de pós de Nb a partir da redução aluminotérmica com ignição por plasma

The aluminothermic reduction consists in an exothermic reaction between a metallic oxide and aluminum to produce the metal and the scum. The extracted melted metal of that reaction usually comes mixed with particles of Al2O3 resulting of the reduction, needing of subsequent refine to eliminate the residual impure as well as to eliminate porosities. Seeking to obtain a product in powder form with nanometric size or even submicrometric, the conventional heat source of the reaction aluminothermic , where a resistor is used (ignitor) as ignition source was substituted, for the plasma, that acts more efficient way in each particle of the sample. In that work it was used as metallic oxide the niobium pentoxide (Nb2O5) for the exothermal reaction Nb2O5 + Al. Amounts stoichiometric, substoichiometric and superestoichiometric of aluminum were used. The Nb2O5 powder was mixed with aluminum powder and milled in planetarium of high energy for a period of 6 hours. Those powders were immerged in plasm that acts in a punctual way in each particle, transfering heat, so that the reaction can be initiate and spread integrally for the whole volume of the particle. The mixture of Nb2O5 + Al was characterized through the particle size analysis by laser and X-ray diffraction (DRX) and the obtained product of reaction was characterized using the electronic microscopy of sweeping (MEV) and the formed phases were analyzed by DRX. Niobium powders with inferior sizes to 1 mm were obtained by that method. It is noticed, through the analysis of the obtained results, that is possible to accomplish the aluminothermic reduction process by plasma ignition with final particles with inferior sizes to the original oxide

Desenvolvimento de um sistema para aplicação dos conceitos da tecnologia cad3d-bim na indústria moveleira

In this work was developed an information system to apply the concepts of CAD3D-BIM technology for the design activities of the furniture industry. The development of this system was based in an architecture comprised of two modules: a web interface to management the metadata of models from furniture's library and the combination of three-dimensional CAD software with a specific plugin to access the information from this model. To develop this system was also used a Data Base Management System (DBMS) designed to storage the information from models in a hierarchical way, based on concepts of Group Technology (GT). The centralization of information in a single database allows the automatic availability of any changes to all participants involved in a particular project when it‟s happens. Each module from system has its own connection to this database. Finally was developed a prototype from a 3D virtual environment to help create Virtual Reality projects in the web. A study from available technologies to create 3D web applications for execution in websites was done to support this development. The interconnection between modules and the database developed allowed the assembly of a system architecture to support the construction and exhibition of projects of the furniture industry in accordance with the concepts proposed by BIM (Building Information Modeling), using as object of study the furniture industry of state of Rio Grande do Norte

Diagnóstico de plasma de cátodo oco: análise da ação de plasma de argônio e Ar-H2 para a deposição de filmes finos de titânio em pós-descarga

Plasma DC hollow cathode has been used for film deposition by sputtering with release of neutral atoms from the cathode. The DC Plasma Ar-H2 hollow cathode currently used in the industry has proven to be effective in cleaning surfaces and thin film deposition when compared to argon plasma. When we wish to avoid the effects of ion bombardment on the substrate discharge, it uses the post-discharge region. Were generated by discharge plasma of argon and hydrogen hollow cathode deposition of thin films of titanium on glass substrate. The optical emission spectroscopy was used for the post-discharge diagnosis. The films formed were analyzed by mechanical profilometry technique. It was observed that in the spectrum of the excitation lines of argon occurred species. There are variations in the rate of deposition of titanium on the glass substrate for different process parameters such as deposition time, distance and discharge working gases. It was noted an increase in intensity of the lines of argon compared with the lines of titanium. Deposition with argon and hydrogen in glass sample observed a higher rate deposition of titanium as more closer the sample was in the discharge

Diagnóstico de descarga de cátodo oco de ar e pós-descarga Ar N2 por espectroscopia de emissão óptica e espectrometria de massa

Many applications require that the plasma discharge is produced apart from the surface to be processed, thus preventing damage caused by bombardment and/or plasma radiation. In the post-discharge regime in various applications thermally sensitive materials can be used. In this work, active species produced by discharge and post-discharge hollow cathode were diagnosed by optical emission spectroscopy and mass spectrometry. The discharge was produced with the gases Ar and Ar - N2 gas flow ranging from 1 to 6 cm3/min and electric current between 150 to 600 mA. It was estimated that the ion density inside the hollow cathode, with 2 mm diameter ranged between 7.71 and 14.1 x 1015 cm-3. It was observed that the gas flow and the electric current changes the emission intensity of Ar and N2 species. The major ionic species detected by quadrupole mass spectrometry were Ar+ and N2+. The ratio of optical emission intensities of N2(1 +)/Ar(811 nm) was related to the partial pressure of N2 after the hollow cathode discharge at low pressure