Geology, correlations, and geodynamic evolution of the Biga Peninsula (NW Turkey)

L?objectif de ce travail de recherche était de décrypter l?évolution géodynamique de la Péninsule de Biga (Turquie du N-O), à travers l?analyse de deux régions géologiques peu connues, le mélange de Çetmi et la zone d?Ezine (i.e. le Groupe d?Ezine et l?ophiolite de Denizgören). Une étude complète et détaillée de terrain (cartographie et échantillonnage) ainsi qu?une approche multidisciplinaire (sédimentologie de faciès, pétrographie sédimentaire et magmatique, micropaléontologie, datations absolues, géochimie sur roche totale, cristallinité de l?illite) ont permis d?obtenir de nouveaux éléments d?information sur la région considérée. ? Le mélange de Çetmi, de type mélange d?accrétion, affleure au nord et au sud de la Péninsule de Biga ; les principaux résultats de son étude peuvent se résumer comme suit: - Son aspect structural actuel (nature des contacts, organisation tectonique) est principalement dû au régime extensif Tertiaire présent dans la région. - Il est constitué de blocs de différentes natures : rares calcaires Scythien-Ladinien dans le faciès Han Bulog, blocs hectométriques de calcaires d?âge Norien-Rhaetien de rampe carbonatée, nombreux blocs décamétriques de radiolarites rouges d?âge Bajocien- Aptien, blocs/écailles de roches magmatiques de type spilites (basaltes à andésite), ayant des signatures géochimiques d?arcs ou intra-plaques. - La matrice du mélange est constituée d?une association greywacke-argilites dont l?âge Albien inférieur à moyen a été déterminé par palynologie. - L?activité du mélange s?est terminée avant le Cénomanien (discordance Cénomanienne au sommet du mélange, pas de bloc plus jeune que la matrice). - Du point de vue de ses corrélations latérales, le mélange de Çetmi partage plus de traits communs avec les mélanges se trouvant dans les nappes allochtones du Rhodope (nord de la Grèce et sud-ouest de la Bulgarie) qu?avec ceux de la suture Izmir-Ankara (Turquie); il apparaît finalement que sa mise en place s?est faite dans une logique balkanique (chevauchements vers le nord d?âge anté-Cénomanien). ? Le Groupe d?Ezine et l?ophiolite sus-jacente de Denizgören affleurent dans la partie ouest de la Péninsule de Biga. Le Groupe d?Ezine est une épaisse séquence sédimentaire continue (3000 m), subdivisée en trois formations, caractérisée chacune par un type de sédimentation spécifique, relatif à un environnement de dépôt particulier. De par ses caractéristiques (grande épaisseur, variations latérales de faciès et d?épaisseur dans les formations, érosion de matériel provenant de l?amont du bassin), le groupe d?Ezine est interprétée comme un dépôt syn-rift d?âge Permien moyen-Trias inférieur. Il pourrait représenter une partie de la future marge passive sud Rhodopienne à la suite de l?ouverture de l?océan Maliac/Méliata. L?ophiolite de Denizgören sus-jacente repose sur le Groupe d?Ezine par l?intermédiaire d?une semelle métamorphique à gradient inverse, du faciès amphibolite à schiste vert. L?âge du faciès amphibolite suggère une initiation de l?obduction au Barrémien (125 Ma, âge Ar/Ar); cet âge est unique dans le domaine égéen, mais il peut là aussi être relié à une logique balkanique, sur la base de comparaison avec le domaine Rhodopien. ? Toutes les unités précédentes (mélange de Çetmi, Groupe d?Ezine et ophiolite de Denizgören) ont passivement subi trois phases extensives pendant le Tertiaire. Dans la région d?Ezine et du mélange nord, les micaschistes HP sous-jacents ont été exhumés avant l?Eocène moyen. Dans le cas du mélange sud, cette exhumation Eocene est en partie enregistrée dans les mylonites séparant le mélange du dôme métamorphique sous-jacent du Kazda?. Le mélange sud est dans tous les cas fortement érodé à la suite de la double surrection du dôme du Kazda?, près de la lim ite Oligocène/Miocene et pendant le Plio- Quaternaire. Dans le premier cas, ce soulèvement est caractérisé par le développement d?une faille de détachement à faible pendage, qui contrôle à la fois l?exhumation du massif, et la formation d?un bassin sédimentaire syntectonique, de type bassin supradétachement; quant à la phase extensive la plus récente, elle est contrôlée par le jeu de failles normales à forts pendages qui remanient l?ensemble des structures héritées, et dictent la géomorphologie actuelle de la région. ? Il est possible de proposer un scénario pour l?évolution géodynamique de la Péninsule de Biga, basé sur l?ensemble des résultats précédents et sur les données de la géologie régionale ; ses points principaux sont: - La Péninsule de Biga fait partie de la marge Rhodopienne. - Le Groupe d?Ezine est un témoin de la marge passive nord Maliac/Méliata. - L?ophiolite de Denizgören et le mélange de Çetmi ont été mis en place tous deux vers le nord sur la marge précédente, respectivement au Barrémien et à l?Albien terminal- Cénomanien inférieur. - Une forte composante décrochante durant l?emplacement est suggérée par la préservation de fragments de la marge passive et l?absence de métamorphisme dans la plaque inférieure. - Tous les évènements précédents ont été largement affectés par le régime d?extension Tertiaire.<br/><br/>The purpose of this study is to unravel the geodynamic evolution of the Biga Peninsula (NW Turkey) through the detailed study of two poorly known areas, the Çetmi mélange and the Ezine zone (i.e. the Ezine Group and the Denizgören ophiolite). The methodology was based on a detailed field work and a multidisciplinary approach. ? The accretion-related Çetmi mélange is mainly cropping out north and south of the Biga Peninsula; the main results of its study can be summarized as follows: -Its present-day structural aspect (type of contacts, tectonic organisation) is largely inherited from the Tertiary extensional regime in the region. -It is made of blocks of various natures: Han Bulog limestones with a Scythian to Ladinian age, common carbonate ramp Norian-Rhaetian limestones (biggest blocks of the mélange), red radolarite with a Bajocian to Aptian age; the most common lithology of the mélange is made by block/slices of spilitic magmatic rocks (basalt to andesite); they have volcanic arc or within plate basalt geochemical signatures. -The matrix of the mélange is made of a greywacke-shale association of Early-Middle Albian age. - The mélange stopped its activity before the Cenomanian (no younger blocks than the matrix, and Cenomanian unconformity). - If compared to the regional geology, the Çetmi mélange shares some characteristics with the Izmir-Ankara mélanges (less), and with the mélanges from allochthonous nappes found in eastern Rhodope (more); it appears finally that its emplacement is related to a Balkanic logic (ante-Cenomanian northward thrusting). ? The Ezine Group and the overlying Denizgören ophiolite are cropping out in the western part of the Biga Peninsula. The Ezine Group is a thick sedimentary sequence interpreted as a syn-rift deposit of Middle Permian-Early Triassic age. It represents a part of the south Rhodopian passive margin, following the opening of the Maliac/Meliata oceanic domain. The Denizgören ophiolite has been emplaced northward on the Ezine Group in the Barremian (125 Ma, age of the amphibolitic sole); this age is unique in the Aegean domain, but here again, it may be related to a Balkan logic. ? All the previous units (Çetmi mélange, Ezine Group and Denizgören ophiolite) have passively suffered two extensional regimes during the Tertiary. In the Ezine and northern Çetmi mélange area, the underlying HP Çamlýca micaschists were exhumed before the Middle Eocene. As for the southern mélange, it was strongly eroded following the Late Oligocene to Quaternary uplift of the underlying Kazda? Massif. This uplift was characterized by the development of a low-angle detachment fault controlling a part of the exhumation, as well as the development of a supra-detachment basin. ? Based on the previous results, and on the data from the regional geology, one can propose a scenario for the geodynamic evolution of the Biga Peninsula. Its key points are:- The Biga Peninsula is belonging to the Rhodope margin. - The Ezine Group is a remnant of the northern Maliac/Meliata passive margin. - Both the Denizgören ophiolite and the Çetmi mélange have been emplaced northward on the previous margin, respectively in the Barremian and in the Late Albian-Early Cenomanian times. - The preservation of the remnants of the Rhodope margin, as well as the absence of metamorphism in the lower plate suggest a strong strike-slip component during the emplacements. - All the previous events are (at least) partly obliterated by the Tertiary extensional regime.<br/><br/>Le géologue est comme un «historien» de la Terre, qui porte un intérêt particulier à l?étude du passé de notre planète; ce dernier, très ancien, se mesure en dizaines ou centaines de millions d?années (Ma). Or le visage de la terre a constamment évolué au cours des ces millions d?années écoulés, car les plaques (continentales et océaniques) qui composent son enveloppe superficielle ne restent pas immobiles, mais se déplacent continuellement à sa surface, à une vitesse de l?ordre du cm/an (théorie de la tectonique des plaques); c?est ainsi, par exemple, que des océans naissent, grandissent, puis finissent par se refermer. On appelle sutures océaniques, les zones, aujourd?hui sur la terre ferme, où l?on retrouve les restes d?océans disparus. Ces sutures sont caractérisées par deux associations distinctes de roches, que l?on appelle les mélanges et les ophiolites; ces mélanges et ophiolites sont donc les témoins de l?activité passée d?un océan aujourd?hui refermé. L?équipe de recherche dans laquelle ce travail à été réalisé s?intéresse à un vaste domaine océanique fossile: l?océan Néotéthys. Cet océan, de plusieurs milliers de kilomètres de large, séparait alors l?Europe et l?Asie au nord, de l?Afrique, l?Inde et l?Australie au sud. De cet océan, il n?en subsiste aujourd?hui qu?une infime partie, qui se confond avec notre mer Méditerranée actuelle. Or, tout comme l?océan Pacifique est bordé de mers plus étroites (Mer de Chine, du Japon, etc?), l?océan Néotéthys était bordé au nord de mers marginales. C?est dans ce cadre que s?est inscrit mon travail de thèse, puisqu?il a consisté en l?étude d?une suture océanique (mélange plus ophiolite), témoin d?une des mers qui bordait l?océan Néotéthys sur sa marge nord. L?objectif était de préciser de quelle suture il s?agissait, puis de déterminer quand et comment elle avait fonctionné (i.e son évolution géologique). Les roches qui composent cette suture affleurent aujourd?hui en Turquie nord occidentale dans la Péninsule de Biga. Au nord et au sud de la péninsule se trouvent les zones géologique du mélange de Çetmi, et à l?ouest, le Groupe d?Ezine et l?ophiolite susjacente, dite ophiolite de Denizgören. Une étude complète et détaillée de terrain (cartographie, échantillonnage), suivie de diverses analyses en laboratoire (détermination de leur âge, de leur condition de formation, etc?), ont permis d?aboutir aux principaux résultats suivants : - Mise en évidence dans le mélange de Çetmi des témoins (1) de l?océan Lycien disparu (ancienne mer marginale de la Néotéthys), et (2) de la marge continentale qui le bordait au nord. - Fin de l?activité du mélange de Çetmi il y a environ 105 Ma (Albien). - Le mélange de Çetmi est difficilement corrélable dans le temps avec les unités semblables affleurant dans la région d?étude (unicité du mélange), ce qui implique des conditions particulière de formation. - L?ophiolite de Denizgören est un morceau d?océan Lycien posé sur un reste préservé de sa marge continentale nord. - Cette dernière est représentée sur le terrain par une succession de roches caractéristiques, le Groupe d?Ezine. Celui-ci est lui-même un témoin de l?ouverture d?un océan marginal de la Néotethys antérieur au Lycien, l?océan Maliac, qui s?est ouvert il y a 245 Ma (Permien-Trias). - La mise en place de l?ophiolite de Denizgören sur le Groupe d?Ezine (125 Ma, Barrémien) est antérieure à la mise en place du mélange de Çetmi. - Il apparaît que ces deux mises en place sont contemporaines de la formation de la chaîne des Balkans, terminée avant le Cénomanien (100 Ma). - L?évolution dans le temps des objets précédents (océans, marges continentales) montre de grands mouvements latéraux est-ouest entre ces objets (translation). Ce qui implique que les roches que l?on retrouve aujourd?hui sur un transect nord-sud ne l?étaient pas nécessairement auparavant. - Enfin, il s?avère que le mélange de Çetmi, l?ophiolite de Denizgören, et le Groupe d?Ezine ont subi par la suite des déformations extensives importantes qui ont considérablement perturbé le schéma post-mise en place.

Clustering of grape yield maps to delineate site-specific management zones

Zonal management in vineyards requires the prior delineation of stable yield zones within the parcel. Among the different methodologies used for zone delineation, cluster analysis of yield data from several years is one of the possibilities cited in scientific literature. However, there exist reasonable doubts concerning the cluster algorithm to be used and the number of zones that have to be delineated within a field. In this paper two different cluster algorithms have been compared (k-means and fuzzy c-means) using the grape yield data corresponding to three successive years (2002, 2003 and 2004), for a ‘Pinot Noir’ vineyard parcel. Final choice of the most recommendable algorithm has been linked to obtaining a stable pattern of spatial yield distribution and to allowing for the delineation of compact and average sized areas. The general recommendation is to use reclassified maps of two clusters or yield classes (low yield zone and high yield zone) and, consequently, the site-specific vineyard management should be based on the prior delineation of just two different zones or sub-parcels. The two tested algorithms are good options for this purpose. However, the fuzzy c-means algorithm allows for a better zoning of the parcel, forming more compact areas and with more equilibrated zonal differences over time.

A note on the periodic orbits and topological entropy of graph maps

This paper deals with the relationship between the periodic orbits of continuous maps on graphs and the topological entropy of the map. We show that the topological entropy of a graph map can be approximated by the entropy of its periodic orbits.

A parameterization method for the computation of invariant tori and their whiskers in quasi-periodic maps: explorations and mechanisms for the breakdown of hyperbolicity

In two previous papers [J. Differential Equations, 228 (2006), pp. 530 579; Discrete Contin. Dyn. Syst. Ser. B, 6 (2006), pp. 1261 1300] we have developed fast algorithms for the computations of invariant tori in quasi‐periodic systems and developed theorems that assess their accuracy. In this paper, we study the results of implementing these algorithms and study their performance in actual implementations. More importantly, we note that, due to the speed of the algorithms and the theoretical developments about their reliability, we can compute with confidence invariant objects close to the breakdown of their hyperbolicity properties. This allows us to identify a mechanism of loss of hyperbolicity and measure some of its quantitative regularities. We find that some systems lose hyperbolicity because the stable and unstable bundles approach each other but the Lyapunov multipliers remain away from 1. We find empirically that, close to the breakdown, the distances between the invariant bundles and the Lyapunov multipliers which are natural measures of hyperbolicity depend on the parameters, with power laws with universal exponents. We also observe that, even if the rigorous justifications in [J. Differential Equations, 228 (2006), pp. 530-579] are developed only for hyperbolic tori, the algorithms work also for elliptic tori in Hamiltonian systems. We can continue these tori and also compute some bifurcations at resonance which may lead to the existence of hyperbolic tori with nonorientable bundles. We compute manifolds tangent to nonorientable bundles.

Direct to consumer advertising : the case for greater consumer control

A nyone traveling to the United States from countries other than New Zealand will be surprised by the prevalence of health-related advertisements on television, including ads for drugs. Typically, these TV ads follow a pattern: an ad for a burger at only 99 cents, followed by one for a proton-pump inhibitor, then an ad on healthy home-cooked food delivered directly to your home and an ad for a home-based abdominal workout DVD, followed by an ad for a lipid-lowering drug. There are, however, nuances. After 8 pm, the visitor might encounter an ad for the "little blue pill." This sequence sometimes includes an ad featuring antihistamines for allergic rhinitis in spring and one promoting antidepressants in the winter. Such direct-to-consumer advertising (DTCA) of prescription drugs is usual business in the United States and New Zealand but is prohibited in the rest of the world. Why? Because DTCA for prescribing drugs has pros and cons (discussed elsewhere,1-3 including in JGIM4) that are balanced differently in different countries. Constitutional factors-such as the First Amendment protections on speech, including commercial speech, in the United States5 -as well as patient and population safety considerations, which all differ across countries, modulate reactions to DTCA. Additionally, lack of robust data on the impact of DTCA on prescription drug use adds to the confusion. Evidence, though limited, suggests that DTCA increases drug sales. However, whether the increase in sales corrects existing underuse or encourages over/misuse is not clear.

Geology of the Cerro-Quema Au-Cu deposit (Azuero Peninsula, Panama)

The Cerro Quema district, located on the Azuero Peninsula, Panama, is part of a large regional hydrothermal system controlled by regional faults striking broadly E-W, developed within the Río Quema Formation. This formation is composed of volcanic, sedimentary and volcano-sedimentary rocks indicating a submarine depositional environment, corresponding to the fore-arc basin of a Cretaceous-Paleogene volcanic arc. The structures observed in the area and their tectono-stratigraphic relationship with the surrounding formations suggest a compressive and/or transpressive tectonic regime, at least during Late Cretaceous-Oligocene times. The igneous rocks of the Río Quema Formation plot within the calc-alkaline field with trace and rare earth element (REE) patterns of volcanic arc affinity. This volcanic arc developed on the Caribbean large igneous province during subduction of the Farallon Plate. Mineralization consists of disseminations of pyrite and enargite as well as a stockwork of pyrite and barite with minor sphalerite, galena and chalcopyrite, hosted by a subaqueous dacitic lava dome of the Río Quema Formation. Gold is present as submicroscopic grains and associated with pyrite as invisible gold. A hydrothermal alteration pattern with a core of advanced argillic alteration (vuggy silica with alunite, dickite, pyrite and enargite) and an outer zone of argillic alteration (kaolinite, smectite and illite) has been observed. Supergene oxidation overprinted the hydrothermal alteration resulting in a thick cap of residual silica and iron oxides. The ore minerals, the alteration pattern and the tectono-volcanic environment of Cerro Quema are consistent with a high sulfidation epithermal system developed in the Azuero peninsula during pre-Oligocene times.

Self-Organising Maps and Correlation Analysis as a Tool to Explore Patterns in Excitation-Emission Matrix Data Sets and to Discriminate Dissolved Organic Matter Fluorescence Components

Dissolved organic matter (DOM) is a complex mixture of organic compounds, ubiquitous in marine and freshwater systems. Fluorescence spectroscopy, by means of Excitation-Emission Matrices (EEM), has become an indispensable tool to study DOM sources, transport and fate in aquatic ecosystems. However the statistical treatment of large and heterogeneous EEM data sets still represents an important challenge for biogeochemists. Recently, Self-Organising Maps (SOM) has been proposed as a tool to explore patterns in large EEM data sets. SOM is a pattern recognition method which clusterizes and reduces the dimensionality of input EEMs without relying on any assumption about the data structure. In this paper, we show how SOM, coupled with a correlation analysis of the component planes, can be used both to explore patterns among samples, as well as to identify individual fluorescence components. We analysed a large and heterogeneous EEM data set, including samples from a river catchment collected under a range of hydrological conditions, along a 60-km downstream gradient, and under the influence of different degrees of anthropogenic impact. According to our results, chemical industry effluents appeared to have unique and distinctive spectral characteristics. On the other hand, river samples collected under flash flood conditions showed homogeneous EEM shapes. The correlation analysis of the component planes suggested the presence of four fluorescence components, consistent with DOM components previously described in the literature. A remarkable strength of this methodology was that outlier samples appeared naturally integrated in the analysis. We conclude that SOM coupled with a correlation analysis procedure is a promising tool for studying large and heterogeneous EEM data sets.

Mesozoic geology of Cape Shirreff, Livingston Island, South Shetland Islands, Antarctica.

Al Cap de Shirr e ff (Fig. 1) hi aflora una successió volcànica de com a mínim 450 m de potència, constituïda principalment per laves i, en menor proporció, bretxes vulcanoclàstiques (Fig. 2). Les laves són basalts olivínics subalcalins i andesites basàltiques, que generalment tenen un aspecte massiu. Tot i això, la successió volcànica localment forma una alternança decimètrica de nivells durs i tous, amb potències va r i a bles i presència local de discordances angulars i onlaps, que reflecteixen geometries deposicionals complexes. A la zona nord del Cap de Shirr e ff hi ha aflorament de bretxes vulcanoclàstiques d"aspecte massiu, que localment tenen intercalacions de laves...

Sierpinski curve Julia sets for quadratic rational maps

We investigate under which dynamical conditions the Julia set of a quadratic rational map is a Sierpiński curve.

Improved predictive mapping of indoor radon concentrations using ensemble regression trees based on automatic clustering of geological units.

PURPOSE: According to estimations around 230 people die as a result of radon exposure in Switzerland. This public health concern makes reliable indoor radon prediction and mapping methods necessary in order to improve risk communication to the public. The aim of this study was to develop an automated method to classify lithological units according to their radon characteristics and to develop mapping and predictive tools in order to improve local radon prediction. METHOD: About 240 000 indoor radon concentration (IRC) measurements in about 150 000 buildings were available for our analysis. The automated classification of lithological units was based on k-medoids clustering via pair-wise Kolmogorov distances between IRC distributions of lithological units. For IRC mapping and prediction we used random forests and Bayesian additive regression trees (BART). RESULTS: The automated classification groups lithological units well in terms of their IRC characteristics. Especially the IRC differences in metamorphic rocks like gneiss are well revealed by this method. The maps produced by random forests soundly represent the regional difference of IRCs in Switzerland and improve the spatial detail compared to existing approaches. We could explain 33% of the variations in IRC data with random forests. Additionally, the influence of a variable evaluated by random forests shows that building characteristics are less important predictors for IRCs than spatial/geological influences. BART could explain 29% of IRC variability and produced maps that indicate the prediction uncertainty. CONCLUSION: Ensemble regression trees are a powerful tool to model and understand the multidimensional influences on IRCs. Automatic clustering of lithological units complements this method by facilitating the interpretation of radon properties of rock types. This study provides an important element for radon risk communication. Future approaches should consider taking into account further variables like soil gas radon measurements as well as more detailed geological information.

Quaternary Glacial Geology of Alta Ribagorqa Basin (Central Southern Pyrenees)

This paper is an abstract of the doctoral thesis presented by the autor at the University of Barcelona on September 1983. It constitutes a regional study about the Quatemary Glacial Geology in the Ribagorca high valleys. It is the first work in relation to the geomorphology, sedimentology and stratigraphy of the glacial and related deposits in this zone of the Pyrenees. Several formations of quatemary deposits have been studied in detail (mainly in Llauset Valley and in Tall area); and the local quatemary stratigraphy is established and finally a correlation with some previously studied areas in the Pyrenees is attemped.

Rockfall susceptibility assessment and remote geological mapping with LiDAR point clouds

Characterizing the geological features and structures in three dimensions over inaccessible rock cliffs is needed to assess natural hazards such as rockfalls and rockslides and also to perform investigations aimed at mapping geological contacts and building stratigraphy and fold models. Indeed, the detailed 3D data, such as LiDAR point clouds, allow to study accurately the hazard processes and the structure of geologic features, in particular in vertical and overhanging rock slopes. Thus, 3D geological models have a great potential of being applied to a wide range of geological investigations both in research and applied geology projects, such as mines, tunnels and reservoirs. Recent development of ground-based remote sensing techniques (LiDAR, photogrammetry and multispectral / hyperspectral images) are revolutionizing the acquisition of morphological and geological information. As a consequence, there is a great potential for improving the modeling of geological bodies as well as failure mechanisms and stability conditions by integrating detailed remote data. During the past ten years several large rockfall events occurred along important transportation corridors where millions of people travel every year (Switzerland: Gotthard motorway and railway; Canada: Sea to sky highway between Vancouver and Whistler). These events show that there is still a lack of knowledge concerning the detection of potential rockfalls, making mountain residential settlements and roads highly risky. It is necessary to understand the main factors that destabilize rocky outcrops even if inventories are lacking and if no clear morphological evidences of rockfall activity are observed. In order to increase the possibilities of forecasting potential future landslides, it is crucial to understand the evolution of rock slope stability. Defining the areas theoretically most prone to rockfalls can be particularly useful to simulate trajectory profiles and to generate hazard maps, which are the basis for land use planning in mountainous regions. The most important questions to address in order to assess rockfall hazard are: Where are the most probable sources for future rockfalls located? What are the frequencies of occurrence of these rockfalls? I characterized the fracturing patterns in the field and with LiDAR point clouds. Afterwards, I developed a model to compute the failure mechanisms on terrestrial point clouds in order to assess the susceptibility to rockfalls at the cliff scale. Similar procedures were already available to evaluate the susceptibility to rockfalls based on aerial digital elevation models. This new model gives the possibility to detect the most susceptible rockfall sources with unprecented detail in the vertical and overhanging areas. The results of the computation of the most probable rockfall source areas in granitic cliffs of Yosemite Valley and Mont-Blanc massif were then compared to the inventoried rockfall events to validate the calculation methods. Yosemite Valley was chosen as a test area because it has a particularly strong rockfall activity (about one rockfall every week) which leads to a high rockfall hazard. The west face of the Dru was also chosen for the relevant rockfall activity and especially because it was affected by some of the largest rockfalls that occurred in the Alps during the last 10 years. Moreover, both areas were suitable because of their huge vertical and overhanging cliffs that are difficult to study with classical methods. Limit equilibrium models have been applied to several case studies to evaluate the effects of different parameters on the stability of rockslope areas. The impact of the degradation of rockbridges on the stability of large compartments in the west face of the Dru was assessed using finite element modeling. In particular I conducted a back-analysis of the large rockfall event of 2005 (265'000 m3) by integrating field observations of joint conditions, characteristics of fracturing pattern and results of geomechanical tests on the intact rock. These analyses improved our understanding of the factors that influence the stability of rock compartments and were used to define the most probable future rockfall volumes at the Dru. Terrestrial laser scanning point clouds were also successfully employed to perform geological mapping in 3D, using the intensity of the backscattered signal. Another technique to obtain vertical geological maps is combining triangulated TLS mesh with 2D geological maps. At El Capitan (Yosemite Valley) we built a georeferenced vertical map of the main plutonio rocks that was used to investigate the reasons for preferential rockwall retreat rate. Additional efforts to characterize the erosion rate were made at Monte Generoso (Ticino, southern Switzerland) where I attempted to improve the estimation of long term erosion by taking into account also the volumes of the unstable rock compartments. Eventually, the following points summarize the main out puts of my research: The new model to compute the failure mechanisms and the rockfall susceptibility with 3D point clouds allows to define accurately the most probable rockfall source areas at the cliff scale. The analysis of the rockbridges at the Dru shows the potential of integrating detailed measurements of the fractures in geomechanical models of rockmass stability. The correction of the LiDAR intensity signal gives the possibility to classify a point cloud according to the rock type and then use this information to model complex geologic structures. The integration of these results, on rockmass fracturing and composition, with existing methods can improve rockfall hazard assessments and enhance the interpretation of the evolution of steep rockslopes. -- La caractérisation de la géologie en 3D pour des parois rocheuses inaccessibles est une étape nécessaire pour évaluer les dangers naturels tels que chutes de blocs et glissements rocheux, mais aussi pour réaliser des modèles stratigraphiques ou de structures plissées. Les modèles géologiques 3D ont un grand potentiel pour être appliqués dans une vaste gamme de travaux géologiques dans le domaine de la recherche, mais aussi dans des projets appliqués comme les mines, les tunnels ou les réservoirs. Les développements récents des outils de télédétection terrestre (LiDAR, photogrammétrie et imagerie multispectrale / hyperspectrale) sont en train de révolutionner l'acquisition d'informations géomorphologiques et géologiques. Par conséquence, il y a un grand potentiel d'amélioration pour la modélisation d'objets géologiques, ainsi que des mécanismes de rupture et des conditions de stabilité, en intégrant des données détaillées acquises à distance. Pour augmenter les possibilités de prévoir les éboulements futurs, il est fondamental de comprendre l'évolution actuelle de la stabilité des parois rocheuses. Définir les zones qui sont théoriquement plus propices aux chutes de blocs peut être très utile pour simuler les trajectoires de propagation des blocs et pour réaliser des cartes de danger, qui constituent la base de l'aménagement du territoire dans les régions de montagne. Les questions plus importantes à résoudre pour estimer le danger de chutes de blocs sont : Où se situent les sources plus probables pour les chutes de blocs et éboulement futurs ? Avec quelle fréquence vont se produire ces événements ? Donc, j'ai caractérisé les réseaux de fractures sur le terrain et avec des nuages de points LiDAR. Ensuite, j'ai développé un modèle pour calculer les mécanismes de rupture directement sur les nuages de points pour pouvoir évaluer la susceptibilité au déclenchement de chutes de blocs à l'échelle de la paroi. Les zones sources de chutes de blocs les plus probables dans les parois granitiques de la vallée de Yosemite et du massif du Mont-Blanc ont été calculées et ensuite comparés aux inventaires des événements pour vérifier les méthodes. Des modèles d'équilibre limite ont été appliqués à plusieurs cas d'études pour évaluer les effets de différents paramètres sur la stabilité des parois. L'impact de la dégradation des ponts rocheux sur la stabilité de grands compartiments de roche dans la paroi ouest du Petit Dru a été évalué en utilisant la modélisation par éléments finis. En particulier j'ai analysé le grand éboulement de 2005 (265'000 m3), qui a emporté l'entier du pilier sud-ouest. Dans le modèle j'ai intégré des observations des conditions des joints, les caractéristiques du réseau de fractures et les résultats de tests géoméchaniques sur la roche intacte. Ces analyses ont amélioré l'estimation des paramètres qui influencent la stabilité des compartiments rocheux et ont servi pour définir des volumes probables pour des éboulements futurs. Les nuages de points obtenus avec le scanner laser terrestre ont été utilisés avec succès aussi pour produire des cartes géologiques en 3D, en utilisant l'intensité du signal réfléchi. Une autre technique pour obtenir des cartes géologiques des zones verticales consiste à combiner un maillage LiDAR avec une carte géologique en 2D. A El Capitan (Yosemite Valley) nous avons pu géoréferencer une carte verticale des principales roches plutoniques que j'ai utilisé ensuite pour étudier les raisons d'une érosion préférentielle de certaines zones de la paroi. D'autres efforts pour quantifier le taux d'érosion ont été effectués au Monte Generoso (Ticino, Suisse) où j'ai essayé d'améliorer l'estimation de l'érosion au long terme en prenant en compte les volumes des compartiments rocheux instables. L'intégration de ces résultats, sur la fracturation et la composition de l'amas rocheux, avec les méthodes existantes permet d'améliorer la prise en compte de l'aléa chute de pierres et éboulements et augmente les possibilités d'interprétation de l'évolution des parois rocheuses.

Engineering Geology for Society and Territory: volume 2: landslide processes

This book is one out of 8 IAEG XII Congress volumes, and deals with Landslide processes, including: field data and monitoring techniques, prediction and forecasting of landslide occurrence, regional landslide inventories and dating studies, modeling of slope instabilities and secondary hazards (e.g. impulse waves and landslide-induced tsunamis, landslide dam failures and breaching), hazard and risk assessment, earthquake and rainfall induced landslides, instabilities of volcanic edifices, remedial works and mitigation measures, development of innovative stabilization techniques and applicability to specific engineering geological conditions, use of geophysical techniques for landslide characterization and investigation of triggering mechanisms. Focuses is given to innovative techniques, well documented case studies in different environments, critical components of engineering geological and geotechnical investigations, hydrological and hydrogeological investigations, remote sensing and geophysical techniques, modeling of triggering, collapse, runout and landslide reactivation, geotechnical design and construction procedures in landslide zones, interaction of landslides with structures and infrastructures and possibility of domino effects. The Engineering Geology for Society and Territory volumes of the IAEG XII Congress held in Torino from September 15-19, 2014, analyze the dynamic role of engineering geology in our changing world and build on the four main themes of the congress: environment, processes, issues, and approaches.

Dynamics of integrable birational maps preserving genus 0 foliations

Pòster presentat al congrés NPDDS2014