Life cycle assessment in the food supply chain:a case study

This research aims at assessing the environmental impact of the poultry supply chain from cradle to grave using case study research and also life cycle assessment (LCA). While a limited number of generic poultry production LCA studies have been published, fewer yet assess the whole process of a specific organisation, none comparing the increased impact of further processing. Our results show that irrespectively of the impact assessment method utilised, the process of producing portions is considerably higher in total environmental impact due to the extra raw material required to produce the same mass into retail. Our research contributes to the growing number of LCA studies and could be used by practitioners for comparison against national and international averages. From a theoretical point of view, this research provides new insights into the relationship between vertically integrated supply chains and environmental performance which has not been examined in the past.

Controlled synthesis of poly(neopentyl p-styrene sulfonate) via reversible addition-fragmentation chain transfer polymerisation

The controlled synthesis of poly(neopentyl p-styrene sulfonate) (PNSS) using RAFT polymerisation has been studied. Selected experimental conditions led to the production of PNSS with variable molecular weights and low dispersities (D{stroke}≤1.50). The controlled synthesis of poly(neopentyl p-styrene sulfonate) (PNSS) using reversible addition-fragmentation chain transfer polymerisation has been studied under a wide range of experimental conditions. PNSS can be used as an organic-soluble, thermally labile precursor for industrially valuable poly(p-styrene sulfonate), widely employed in technologies such as ionic exchange membranes and organic electronics. The suitability of two different chain transfer agents, three solvents, three different monomer concentrations and two different temperatures for the polymerisation of neopentyl p-styrene sulfonate is discussed in terms of the kinetics of the process and characteristics of the final polymer. Production of PNSS with systematically variable molecular weights and low dispersities (D{stroke} ≤1.50 in all cases) has been achieved using 2-azidoethyl 2-(dodecylthiocarbonothioylthio)-2-methylpropionate in anisole at 75°C, with an initial monomer concentration of 4.0molL-1. Finally, a poly(neopentyl p-styrene sulfonate)-b-polybutadiene-b-poly(neopentyl p-styrene sulfonate) (PNSS-b-PBD-b-PNSS) triblock copolymer has been synthesised via azide-alkyne click chemistry. Moreover, subsequent thermolysis of the PNSS moieties generated poly(p-styrene sulfonate) end blocks. This strategy allows the fabrication of amphiphilic copolymer films from single organic solvents without the need for post-deposition chemical treatment.

Supply chain management resources, capabilities and execution

This paper identifies inter- and intra-organisational management resources that determine the level of execution of inter-firm alliance supply chain management (SCM). By drawing on network and resource-based view theories, a conceptual model proposes the effects of SCM resources and capabilities as influencing factors on SCM execution. The model was tested using survey data from studies conducted in two European supply chain environments. Variance-based structural equation modelling confirmed the hypothesised hierarchical order of three proposed antecedents: internal SCM resources affect joint SCM resources, which in turn influence collaborative SCM-related processes and finally SCM execution. An importance-performance analysis for both settings shows that providing and investing in internal SCM resources should be a priority when aiming to increase SCM execution. The theoretical contribution of this paper lies in confirming that the improvement of SCM execution follows a clear pathway featuring internal supply chain resources as one of the main drivers. The practical implications of this research include the development of a prioritisation list of measures that elevate SCM execution in the two country settings. © 2014 © 2014 Taylor & Francis.

Decision support system for vendor managed inventory supply chain:a case study

Vendor-managed inventory (VMI) is a widely used collaborative inventory management policy in which manufacturers manages the inventory of retailers and takes responsibility for making decisions related to the timing and extent of inventory replenishment. VMI partnerships help organisations to reduce demand variability, inventory holding and distribution costs. This study provides empirical evidence that significant economic benefits can be achieved with the use of a genetic algorithm (GA)-based decision support system (DSS) in a VMI supply chain. A two-stage serial supply chain in which retailers and their supplier are operating VMI in an uncertain demand environment is studied. Performance was measured in terms of cost, profit, stockouts and service levels. The results generated from GA-based model were compared to traditional alternatives. The study found that the GA-based approach outperformed traditional methods and its use can be economically justified in small- and medium-sized enterprises (SMEs).

Holonic supply chain:a study from family-based manufacturing perspective

In the contemporary business environment, to adhere to the need of the customers, caused the shift from mass production to mass-customization. This necessitates the supply chain (SC) to be effective flexible. The purpose of this paper is to seek flexibility through adoption of family-based dispatching rules under the influence of inventory system implemented at downstream echelons of an industrial supply chain network. We compared the family-based dispatching rules in existing literature under the purview of inventory system and information sharing within a supply chain network. The dispatching rules are compared for Average Flow Time performance, which is averaged over the three product families. The performance is measured using extensive discrete event simulation process. Given the various inventory related operational factors at downstream echelons, the present paper highlights the importance of strategically adopting appropriate family-based dispatching rule at the manufacturing end. In the environment of mass customization, it becomes imperative to adopt the family-based dispatching rule from the system wide SC perspective. This warrants the application of intra as well as inter-echelon information coordination. The holonic paradigm emerges in this research stream, amidst the holistic approach and the vital systemic approach. The present research shows its novelty in triplet. Firstly, it provides leverage to manager to strategically adopting a dispatching rule from the inventory system perspective. Secondly, the findings provide direction for the attenuation of adverse impact accruing from demand amplification (bullwhip effect) in the form of inventory levels by appropriately adopting family-based dispatching rule. Thirdly, the information environment is conceptualized under the paradigm of Koestler's holonic theory.

Green manufacturing supply chain design and operations decision support

This special issue of International Journal of Production Research provides a platform for sharing the knowledge base, recent research outputs and a review of recent developments highlighting the critical aspects of green manufacturing supply chain design and operations decision support. The special issue includes 15 contributions presenting new and significant research in the relevant area. Contributions mainly present either a novel green/sustainable manufacturing supply chain design and operations decision support approach applied to a problem, or a state-of-the-art method on green/sustainable factors in supply chain design and operations. The article delineates an overview of the contributions and their significance, and an introspection on the ‘green’ factors involved.

Modelling and linking transformations in EPCIS governing supply chain business processes

Supply chains comprise of complex processes spanning across multiple trading partners. The various operations involved generate large number of events that need to be integrated in order to enable internal and external traceability. Further, provenance of artifacts and agents involved in the supply chain operations is now a key traceability requirement. In this paper we propose a Semantic web/Linked data powered framework for the event based representation and analysis of supply chain activities governed by the EPCIS specification. We specifically show how a new EPCIS event type called "Transformation Event" can be semantically annotated using EEM - The EPCIS Event Model to generate linked data, that can be exploited for internal event based traceability in supply chains involving transformation of products. For integrating provenance with traceability, we propose a mapping from EEM to PROV-O. We exemplify our approach on an abstraction of the production processes that are part of the wine supply chain.

Ellátási lánc kapcsolatok modellezése = Modeling of supply chain relationships

A dolgozatban az ellátási láncokban meglévő diadikus kapcsolatok minőségét állítjuk a vizsgálatok középpontjába. Az irodalomban számtalan megközelítés ismert az ellátási lánc kapcsolatok fejlődésének leírására. Ezen fejlődési elméletek inkább elméleti szinten írják le a diadikus kapcsolatok változását, annak empirikus tesztelhetőségét nem vizsgálják. Dolgozatunkban kísérletet teszünk az ellátási lánc kapcsolatok fejlődésének empirikus vizsgálatára. Arra próbálunk választ találni, hogy az életciklus hipotézis az üzleti kapcsolatok időbeli fejlődésére alkalmazható-e. = Our paper combines two approaches using data of an internet based questionnaire and applying quantitative analysis it tests the hypothesis business relationship development in time can be described with the concept of life cycle. The concept of life cycle is widely used in business research. Among others the diffusion of innovation is described using this concept, or the concept of product life cycle just to name a few. All of these researches analyze the life cycle along a specific variable (for example the volume of sales or revenue in case of the product life cycle) which (except the last stage of the cycle, the decline) has a cumulative character resulting in the widely known specific shape of a life cycle. Consequently testing a life cycle hypothesis inevitably means the acceptance of some type cumulativity in the development.

Cooperation in an HMMS-type supply chain: A management application of cooperative game theory = Kooperáció egy HMMS-típusú ellátási láncban: A kooperatív játékelmélet egy menedzsment alkalmazása

We apply cooperative game theory concepts to analyze a Holt-Modigliani-Muth-Simon (HMMS) supply chain. The bullwhip effect in a two-stage supply chain (supplier-manufacturer) in the framework of the HMMS-model with quadratic cost functions is considered. It is assumed that both firms minimize their relevant costs, and two cases are examined: the supplier and the manufacturer minimize their relevant costs in a decentralized and in a centralized (cooperative) way. The question of how to share the savings of the decreased bullwhip effect in the centralized (cooperative) model is answered by the weighted Shapley value, by a transferable utility cooperative game theory tool, where the weights are for the exogenously given “bargaining powers” of the participants of the supply chain. = A cikkben a kooperatív játékelmélet fogalmait alkalmazzuk egy Holt-Mogigliani-Muth-Simon-típusú ellátási lánc esetében. Az ostorcsapás-hatás elemeit egy beszállító-termelő ellátási láncban ragadjuk meg egy kvadratikus készletezési és termelési költség mellett. Feltételezzük, hogy mindkét vállalat minimalizálja a releváns költségeit. Két működési rendszert hasonlítunk össze: egy hierarchikus döntéshozatali rendszert, amikor először a termelő, majd a beszállító optimalizálja helyzetét, majd egy centralizált (kooperatív) modellt, amikor a vállalatok az együttes költségüket minimalizálják. A kérdés úgy merül fel, hogy a csökkentett ostorcsapás-hatás esetén hogyan osszák meg a részvevők ebben a transzferálható hasznosságú kooperatív játékban a költség megtakarítást, exogén módon adott tárgyalási pozíció mellett.

Az ellátási lánc disztribúció oldalának menedzsment eszközei – empirikus elemzés = Management tools of the demand chain – an empirical analysis

A tanulmány célja, hogy bemutassa a Magyarországon működő vállalatok gyakorlatát az ellátási lánc disztribúció oldalának menedzsmentje területén egy empirikus kutatás eredményeinek segítségével. A dolgozat két részből épül fel. Az első részben egy elméleti áttekintés olvasható azokról a menedzsment eszközökről, amelyeket a vállalatok disztribúciós folyamataik során alkalmazhatnak az ellátási láncban. A második rész az empirikus kutatás eredményeit mutatja be. A felmérés során 92 vállalat (amelyből az elemzésbe 79 volt ténylegesen bevonható) vett részt, és válaszaik és a statisztikai elemzés alapján kirajzolódik egy kép, hogy milyen mértékben alkalmazzák a disztribúciós lánc menedzsment eszközeit, valamint milyen fejlettségi szintek különböztethetők meg az alkalmazás volumene alapján. = Aim of the paper is to present the operational practice of Hungarian companies in managing the distribution side of the supply chain (the demand chain), with the help of the results of an empirical research. The paper consists of two parts. In the first part, a literature review is presented about the management tools which companies may use while managing their distribution processes in the supply chain. In the second part I introduce the results of the empirical research. The survey was participated by 92 companies (of which 79 could be analysed) and according to their responses and the statistical analyses, a picture was formulated about how intensely they use the demand chain management tools, how developed they are in the application of those.

The analysis of bullwhip effect in a HMMS-type supply chain

The aim of the paper is to investigate the well-known bullwhip effect of supply chains. Control theoretic analysis of bullwhip effect is extensively analyzed in the literature with the Laplace transform. This paper tries to examine the effect for an extended Holt–Modigliani–Muth–Simon model. A two-stage supply chain (supplier–manufacturer) is studied with quadratic costs functional. It is assumed that both firms minimize the relevant costs. The order of the manufacturer is delayed with a known constant. Two cases are examined: supplier and manufacturer minimize the relevant costs decentralized, and a centralized decision rule. The question is answered, how to decrease the bullwhip effect.

The analysis of bullwhip effect in a HMMS-type supply chain

The aim of the paper is to investigate the well-known bullwhip effect of supply chains. Control theoretic analysis of bullwhip effect is extensively analyzed in the literature with Laplace transform. This paper tries to examine the effect for an extended Holt-Modigliani-Muth-Simon model. A two-stage supply chain (supplier-manufacturer) is studied with quadratic costs functional. It is assumed that both firms minimize the relevant costs. The order of the manufacturer is delayed with a known constant. Two cases are examined: supplier and manufacturer minimize the relevant costs decentralized, and a centralized decision rule. The question is answered, how to decrease the bullwhip effect.

A szolgáltatások ellátási láncának speciális menedzsmentjellemzői (Management specialties of supply chain of services)

Az elmúlt évtizedekben a gazdálkodástudomány kitüntetett figyelemmel kísért két – mind a makrogazdaság, mind az egyes vállalatok működésének sikere szempontjából meghatározó fontosságú – jelenséget, egyrészt a szolgáltatásoknak a hagyományos termeléssel szembeni egyre erőteljesebb térnyerését, másrészt a fogyasztói érték teremtése szempontjából növekvő jelentőségű ellátási láncoknak, illetve azok menedzsmentjének kérdéskörét. Ugyanakkor igen kevés elemzés, de kevés leíró jellegű munka is született a két jelenséget és menedzsmentproblémát összekapcsoló területről, azaz a szolgáltatások ellátási láncáról, ezen ellátási láncok kezelésének speciális problémáiról. A szerzők cikkükben a szolgáltatások ellátási láncának és menedzsmentjének jellegzetességeit, a klasszikus terméket előállító ellátási láncokhoz viszonyított sajátosságait foglalják össze a nemzetközi szakirodalom alapján. Ennek során bemutatják, hogy az ún. tiszta szolgáltatások széles körben ismert jellemzői hatással vannak a szolgáltatások előállítását és értékesítését végző ellátási láncok működésére is. Ezek a hatások és specialitások megjelennek az ellátásilánc-menedzsment irodalmában kiemelten tárgyalt mindhárom problémakörben, rányomják tehát bélyegüket mind az ellátási lánc felépítésére, mind az ellátási láncban együttműködő partnerek kapcsolatának kezelésére és végül, de nem utolsósorban az ellátásilánc-menedzsment folyamatok kezelésére. _________ In the last decades scholars have paid a lot of attention to both service operation and supply chain management. There is still limited research on the overlapping field of theses two management areas, on service supply chain specialties. This article gives a structured overview on the latest research results on this topic. Doing so the paper would like to draw attention of the Hungarian researchers to this field and facilitate these empirical researches. As described in the paper traditional service specialties (intangibility, perishability, inseparability, heterogeneity and the importance of human capital) create special management problems concerning (i) the structure of these supply chains, (ii) their relationship management and (iii) the management of supply chain processes.

Az ellátási láncban elfoglalt pozíció és a szolgálatosodás – üzleti modellek Európában (Supply chain position and servitization – business models in Europe)

A szerzők célja, hogy megvizsgálják, milyen kölcsönhatásban áll az ellátási láncban elfoglalt pozíció, valamint a szolgálatosodás szintje az európai termelővállalatoknál. Vizsgálatuk azt mutatja, hogy a globalizáció és a termelés nemzetközivé válása mindkét tényezőt jelentős mértékben befolyásolja. A termelés globalizációs trendjeinek megfelelően így a kelet-európai (fejlődő), illetve a nyugat-európai (fejlett) országokban eltérő üzleti modellek válnak dominánssá, amelyek különböző ellátásilánc-pozícióval és más-más szintű szolgáltatásnyújtással jellemezhetőek. A domináns üzleti modellek mellett természetesen más üzleti modellek is működőképesnek bizonyulhatnak a két vizsgált régióban. A létesítmények elhelyezésére, valamint az üzleti eredményességre vonatkozó mutatók elemzésbe történő bevonásával cikkük az Európában működő üzleti modellek kialakításának okára, valamint jövőbeli fenntarthatóságára is megpróbál választ adni. __________ The objective of this paper is to examine the relationship between supply chain position and level of servitization in European manufacturing companies. The analysis shows that globalization and internationalization of production has dramatic impact on both phenomena. Due to the globalization trends different business models became dominant in the less developed Eastern-European and the more developed Western European countries, which can be characterized by different supply chain position and servitization level. Certainly other business models can also be successful in the two regions. Involving facility location motivations and business performance indicators the article shed light on the reasons of why these business models came alive and how sustainable they can be.

Innovation across the food chain – the Hungarian case

The small and medium sized enterprises (SMEs) in the Hungarian agri-food sector play determining role. The innovation capacity (efforts, activities and results) however of the individual SMEs is very limited. Food production (including SMEs) has to fulfil food safety requirements in a rapidly increasing extent, which implies a continuous innovation and development process from all market players. In Hungary the agri-food chain had to face a suddenly increased competition especially after the EU enlargement. Based on survey data this paper examines the efforts, activities and results in knowledge acquisition, utilisation, coordination and transfer in the Central Hungarian food SMEs. We have found (using ordered logistic regression) that R&D expenditures, achieved innovations, export/import orientation as well as the networking activity of the SMEs play significant role in market development.