Confocal laser scanning microscopy investigation of bond interfaces involved in fiber glass post cementation

Objective: This confocal microscopy study evaluated the cement/dentin and cement/post interfaces along theroot canalwallswhenfiberglasspostswerebonded to dentin using different types of cements. Material & Methods: Thirty endodontically treated premolars were divided into 3 groups according to the adhesive materials used in the bonding procedure: Prime & Bond 2.1/Self Cure + Enforce, RelyX Unicem and RelyX Luting. Rhodamine B dye was incorporated in the luting materials for the cementation of the fiber glass posts (Exacto, Angelus) to dentin. Three transversal slices (apical, middle and coronal) were examined under confocal laser scanning microscopy. Statistical analysis was performed using the Kappa, Kruskal-Wallis and Dunnet tests, in a significance level of 5%. Results: The Prime & Bond 2.1/Self Cure + Enforce presented a uniform formation of tags in the dentin but gaps in the cement/dentin interface. The RelyX Unicem and RelyX Luting presented an adhesive interface with a fewer amount of gaps, but showed shorter tag formation than the Enforce system. All cements presented the same pattern of bubbles inside the cements. The RelyX Luting presented a greater amount of cracks inside the cement in comparison with the other cements in the coronal third, while no difference was observed between RelyX Unicem and Enforce. The RelyX Luting showed the lowest quantity of cement penetration into the post. Conclusion: In general, the quality of bonding interfaces of fiber posts luted to root canals was affected by both location and type of cement.

Seletividade dos herbicidas Bentazon e Nicosulfuron para Crotalaria juncea e Crotalaria spectabilis em consórcio com a cultura do milho

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Intervalos de chuva sobre a eficácia de controle químico de trapoeraba (Commelina benghalensis)

The objective was to evaluate the influence of intervals without rain after the application of mixtures of carfentrazone-ethyl and glyphosate in the effectiveness of control on Commelina benghalensis. The experimental design was completely randomized with 11 treatments, with two rates of the mixture carfentrazone + glyphosate, 30 + 960 (with sequential application at 21 DAA of the mixture 20 + 960 g ha-1) and 50 + 960 g ha-1 of a.i. and five intervals of precipitation 0, 3, 6, 12 and 24 hours after application (HAA), with four repetitions, being an absolute check. The mixture was applied in post-emergence, then was carried out simulations of rain in the predetermined intervals. Were assessed the effectiveness of visual control (0 to 100 %) at 7, 14, 21, 28, 35 and 42 DAA. The results were compared by t test, with 10 % level of probability. It was observed that the application of the herbicides carfentrazone + glyphosate in the evaluated rates and even in the sequential application did not have control of C. benghalensis. The results with the second application are greater than the single application, and the best absorption of the mixture carfentrazone + glyphosate by C. benghalensis when there is a bigger interval between application and rainfall occurrence, and is necessary a minimum interval of 6 HAA for intermediate control of C. benghalensis.

Interferência da distância de transporte e do manejo pré-abate no frigorífico sobre as injúrias na carcaça e qualidade da carne suína

Pós-graduação em Ciência e Tecnologia Animal - FEIS

Desenvolvimento de células solares de perovskita baseadas em filmes de óxidos nanoestruturados

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação imediata e após 6 meses da resistência de união a dentina de restaurações de resina composta classe I in vivo e in vitro

Pós-graduação em Odontologia Restauradora - ICT

A New Birth-Interval Approach to Estimating Demographic Parameters of Humpback Whales

A demographic model is developed based on interbirth intervals and is applied to estimate the population growth rate of humpback whales (Megaptera novaeangliae) in the Gulf of Maine. Fecundity rates in this model are based on the probabilities of giving birth at time t after a previous birth and on the probabilities of giving birth first at age x. Maximum likelihood methods are used to estimate these probabilities using sighting data collected for individually identified whales. Female survival rates are estimated from these same sighting data using a modified Jolly–Seber method. The youngest age at first parturition is 5 yr, the estimated mean birth interval is 2.38 yr (SE = 0.10 yr), the estimated noncalf survival rate is 0.960 (SE = 0.008), and the estimated calf survival rate is 0.875 (SE = 0.047). The population growth rate (l) is estimated to be 1.065; its standard error is estimated as 0.012 using a Monte Carlo approach, which simulated sampling from a hypothetical population of whales. The simulation is also used to investigate the bias in estimating birth intervals by previous methods. The approach developed here is applicable to studies of other populations for which individual interbirth intervals can be measured.

Desenvolvimento de células solares de perovskita baseadas em filmes de óxidos nanoestruturados

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação imediata e após 6 meses da resistência de união a dentina de restaurações de resina composta classe I in vivo e in vitro

Pós-graduação em Odontologia Restauradora - ICT

An ice machine adapted into an autonomous photovoltaic system without batteries using a variable-speed drive

The adaptation of a commercially available ice machine for autonomous photovoltaic operation without batteries is presented. In this adaptation a 1040 W(p) photovoltaic array directly feeds a variable-speed drive and a 24 V(dc) source. The drive runs an induction motor coupled by belt-and-pulley to an open reciprocating compressor, while the dc source supplies a solenoid valve and the control electronics. Motor speed and refrigerant evaporation pressure are set aiming at continuously matching system power demand to photovoltaic power availability. The resulting system is a simple integration of robust, standard, readily available parts. It produces 27 kg of ice in a clear-sky day and has ice production costs around US$0.30/kg. Although a few machine features might be specific to Brazil, its technical and economical guidelines are applicable elsewhere. Copyright (C); 2010 John Wiley & Sons, Ltd.

NONSPECIFIC INFECTIOUS DISEASES IN PREHISTORIC SAN PEDRO DE ATACAMA, NORTHERN CHILE

The region of San Pedro de Atacama, Northern Chile, has undergone several cultural and social changes after humans settled in Atacama Desert around 500 BC. The Atacameno people experienced the highest degree of social and cultural changes between 400 and 900 AD when they were assimilated into the Tiwanaku trade and political web that influenced most of the Central-Southern Andes. Under the influence of Tiwanaku, San Pedro de Atacama experienced its greatest economic development. Prior analyses of local human skeletal remains have shown a significant increase in the stature of the local population during the same period. In this paper, we investigate the impact of the Tiwanaku influence on the local epidemiological profile using the incidence of periostitis and osteomyelitis as indicators of biological stress. Surprisingly, the best epidemiological condition occurred during the final phase of influence of Tiwanaku (910-960 AD), and not during the apex influence (480-920 AD), as expected by the archaeological context. We suggest that population growth and aggregation may have counteracted the benefits of improved nutrition during the peak Tiwanaku influence. A severe drought occurred between 1,100 and 1,400 AD in Northern Chile. This could also explain the marked increase of bone infections in the post-Tiwanaku period (920-1,240 AD).

Research Blogging: Indexing and Registering the Change in Science 2.0

Increasing public interest in science information in a digital and 2.0 science era promotes a dramatically, rapid and deep change in science itself. The emergence and expansion of new technologies and internet-based tools is leading to new means to improve scientific methodology and communication, assessment, promotion and certification. It allows methods of acquisition, manipulation and storage, generating vast quantities of data that can further facilitate the research process. It also improves access to scientific results through information sharing and discussion. Content previously restricted only to specialists is now available to a wider audience. This context requires new management systems to make scientific knowledge more accessible and useable, including new measures to evaluate the reach of scientific information. The new science and research quality measures are strongly related to the new online technologies and services based in social media. Tools such as blogs, social bookmarks and online reference managers, Twitter and others offer alternative, transparent and more comprehensive information about the active interest, usage and reach of scientific publications. Another of these new filters is the Research Blogging platform, which was created in 2007 and now has over 1,230 active blogs, with over 26,960 entries posted about peer-reviewed research on subjects ranging from Anthropology to Zoology. This study takes a closer look at RB, in order to get insights into its contribution to the rapidly changing landscape of scientific communication.

Polarization effect on the two-photon absorption of a chiral compound

In this report, we investigate the polarization effect (linear, elliptical and circular) on the two-photon absorption (2PA) properties of a chiral compound based in azoaromatic moieties using the femtosecond Z-scan technique with low repetition rate and low pulse energy. We observed a strong 2PA modulation between 800 nm and 960 nm as a function the polarization changes from linear through elliptical to circular. Such results were interpreted employing the sum-over-essential states approach, which allowed us to model the 2PA circular-linear dichroism effect and to identifier the overlapping of the excited electronic states responsible by the 2PA allowed band. (C) 2012 Optical Society of America

CONTROL OF GLYPHOSATE RESISTANT HAIRY FLEABANE (Conyza bonariensis) WITH DICAMBA AND 2,4-D

Auxyn type herbicides such as dicamba and 2,4-D are alternative herbicides that can be used to control glyphosate-resistant hairy fleabane. With the forthcoming possibility of releasing dicamba-resistant and 2,4-D-resistant crops, use of these growth regulator herbicides will likely be an alternative that can be applied to the control of glyphosate resistant hairy fleabane (Conyza bonariensis). The objective of this research was to model the efficacy, through dose-response curves, of glyphosate, 2,4-D, isolated dicamba and glyphosate-dicamba combinations to control a brazilian hairy fleabane population resistant to glyphosate. The greenhouse dose-response studies were conducted as a completely randomized experimental design, and the rates used for dose response curve construction were 0, 120, 240, 480, 720 and 960 ga.i. ha(-1) for 2,4-D, dicamba and the dicamba combination, with glyphosate at 540 g a. e. ha(-1). The rates for glyphosate alone were 0, 180, 360, 540, 720 and 960 g a. e. ha(-1). Herbicides were applied when the plants were in a vegetative stage with 10 to 12 leaves and height between 12 and 15 cm. Hairy fleabane had low sensitivity to glyphosate, with poor control even at the 960 g a. e. ha(-1) rate. Dicamba and 2,4-D were effective in controlling the studied hairy fleabane. Hairy fleabane responds differently to 2,4-D and dicamba. The combination of glyphosate and dicamba was not antagonistic to hairy fleabane control, and glyphosate may cause an additive effect on the control, despite the population resistance.

Applying validated quality indicators to surgical antibiotic prophylaxis in a Brazilian hospital: Learning what should be learned

Background: Compliance with the best surgical antibiotic prophylaxis practice is usually low despite many published guidelines. Objective: This study investigated compliance with the Hospital Infection Control Committee guideline for antibiotic prophylaxis in a Brazilian hospital using quality indicators. Methods: A retrospective study was carried out from November 2009 to March 2010. Medical records from adult inpatients undergoing cardiac, neurologic, and orthopedic clean surgeries were included. The full compliance index was considered 100% when the antibiotic prophylaxis showed adequacy in all evaluated attributes. Analyses were conducted with 5% significance. Results: Medical records from 101 cardiac, 128 neurologic, and 519 orthopedic surgical patients were evaluated. The compliance index was 4.9%, and the compliance index according to specialty was 5.8%, 3.1%, and 3.0%, respectively, for orthopedic, neurologic, and cardiac surgeries. The attribute route of administration produced the best outcomes, whereas the attribute duration of antibiotic prophylaxis produced the worst. No association was identified between compliance to the attributes and patient characteristics. Conclusion: This study showed a low level of adherence to Hospital Infection Control Committee guidelines for antibiotic prophylaxis. This suggests that different strategies should be implemented to promote the best possible practice in the field of antibiotic prophylaxis with greater surgeon engagement. Copyright (C) 2012 by the Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.