LRP-1 variation is not associated with risk of Alzheimer's disease

Alzheimer's disease (AD) is characterised by the extensive deposition of amyloid beta (Aß) within the parenchyma and vasculature of the brain. It is hypothesised that a dysfunction in Aß degradation and/or its removal from the brain may result in accumulation as plaques. Low density lipoprotein receptor-related protein-1 (LRP-1) is a multifunctional receptor shown to be involved in cholesterol metabolism but also the removal of Aß from the brain. Its ability to transport Aß from the brain to the periphery has made it an attractive candidate for involvement in Alzheimer's disease (AD). We have assessed the frequencies of 9 tag- SNPs and the commonly studied synonymous SNP within exon 3 (rs1799986) in a multi-centre AD/control cohort and performed haplotype analysis. We found no evidence from a combined total of 412 controls and 1057 AD patients to support the involvement of LRP-1 variation, including the most commonly studied variant in rs1799986 in conferring genetic susceptibility to increased risk of AD.

The distribution of arsenic in soils affected by the Aznalcóllar mine spill, SW Spain

In April 1998, a holding lagoon containing pyrite ore processing waste, failed and released an estimated 5-6 million m(3) of metal rich sludge and acidic waters into the Rio Guadiamar, SW Spain. Over 2700 ha of the internationally important Doñana National and Natural Parks were contaminated. The sludge component of the waste contained up to 0.6% arsenic. This paper presents an extensive set of 0-5 cm soil analyses results from samples taken 6-8 months after the spill. Data are presented on pseudo-total arsenic levels in these samples, and on arsenic removed by both single batch and sequential extraction techniques. Pseudo-total levels of arsenic in the sludge ranged from 1521 to 3510 mg kg(-1), and a mean 4.4% of this was found to be extractable using 2.5% acetic acid. Soils in the Guadiamar Valley and Entremuros areas (those worst affected by the spill) were found to contain 85.4-782 mg kg(-1) and 7.1-196 mg kg(-1) pseudo-total arsenic, respectively. The mean acetic acid extractable component in these areas was 2.5% and 4.9%, respectively. Background pseudo-total arsenic levels in the soils of the area have been found to be 4.2-13.6 mg kg(-1). Rapid input of acidic waters, and the acidic nature of the sludge itself, may have caused depletion of Mg, Na and K, and to a lesser extent Mn, Ca and PO(4) in the upper 5 cm of the worst affected soils. Sequential extraction results suggest clear As-Fe associations, and possible As-Mn associations within the more soluble phases.

Conservation genetics of Ireland's sole population of the River water crowfoot (Ranunculus fluitans Lam.)

Populations of many freshwater species are becoming increasingly threatened as a result of a wide range of anthropogenically mediated factors. In the present study, we wanted to assess levels and patterns of genetic diversity in Ireland's sole population of the River water crowfoot (Ranunculus fluitans), which is restricted to a 12 km stretch of a single river, to assist the formation of conservation strategies. Analysis using amplified fragment length polymorphism (AFLP) indicated comparable levels of genetic diversity to those exhibited by a more extensive population of the species in England, and revealed no evidence of clonal reproduction. Allele-specific PCR analysis of five nuclear single nucleotide polymorphisms (SNPs) indicated no evidence of hybridization with its more abundant congener Ranunculus penicillatus, despite previous anecdotal reports of the occurrence of hybrids. Although the population currently exhibits healthy levels of genetic diversity and is not at risk of genetic assimilation via hybridization with R. penicillatus, it still remains vulnerable to other factors such as stochastic events and invasive species. © 2013 Elsevier B.V. All rights reserved.

Palaeoglacial and palaeoclimatic conditions in the NW Pacific, as revealed by a morphometric analysis of cirques upon the Kamchatka Peninsula

The distribution of glacial cirques upon the Kamchatka peninsula, Far Eastern Russia, is systematically mapped from satellite images and digital elevation model data. A total of 3,758 cirques are identified, 238 of which are occupied by active glaciers. The morphometry of the remaining 3,520 cirques is analysed. These cirques are found to show a very strong N bias in their azimuth (orientation), likely resulting from aspect-related variations in insolation. The strength of this N bias is considered to indicate that former glaciation upon the peninsula was often ‘marginal’, and mainly of cirque-type, with peaks extending little above regional equilibrium-line altitudes. This is supported by the fact that S and SE-facing cirques are the highest in the dataset, suggesting that glacier-cover was rarely sufficient to allow S and SE-facing glaciers to develop at low altitudes. The strength of these azimuth-related variations in cirque altitude is thought to reflect comparatively cloud-free conditions during former periods of glaciation. It is suggested that these characteristics, of marginal glaciation and comparatively cloud-free conditions, reflect the region’s former aridity, which was likely intensified at the global Last Glacial Maximum, and during earlier periods of ice advance, as a result of the development of negative pressure anomalies over the North Pacific (driven by the growth of the Laurentide Ice Sheet), combined with other factors, including an increase in the extent and duration of sea ice, a reduction in global sea levels, cooler sea surface temperatures, and the localised growth of mountain glaciers. There is published evidence to suggest extensive glaciation of the Kamchatka Peninsula at times during the Late Quaternary, yet the data presented here appears to suggest that such phases were comparatively short-lived, and that smaller cirque-type glaciers were generally more characteristic of the period.

Magnetic and electronic structure of TICo2S2

An extensive investigation of the ferromagnetic compound TlCo2S2 has resulted in new information on the electronic and magnetic structure. Electronic structure calculations showed that magnetic ordering is energetically favorable with a clear driving force for ferromagnetic coupling within the cobalt layers. TlCo2S2 is metallic and the conductivity is due to holes in the valence band. XPS single crystal measurements did not show evidence of mixed oxidation states of cobalt. Neutron powder diffraction resulted in a ferromagnetic structure with the magnetic moment in the ab-plane. The derived magnetic moment of the cobalt atom is 0.65(2) mu(B) at 10 K and is in very good agreement with the value, mu(sat) = 0.65(1) mu(B) at 10 K, inferred from the magnetic hysteresis curve. (C) 2004 Elsevier Inc. All rights reserved.

The use of natural health products (NHP) by Ontario seniors

A random dialing telephone survey in 4 Ontario communities obtained data on the use of natural health products (NHP) from 1,071 persons 60 years and older. 553 (52%) respondents were users of NHP. Prevalence of use was similar for females (53%) and males (48%). In this population modal users were of European descent, high school graduates and employed at least part-time. Half the users received recommendations about NHP from friends or relatives; another 22% learned about NHP through self-experimentation. Most users (81 %) decided by themselves whether they would buy an NHP rather than rely on input from another source (herbalist, physician, store owner/employee). 38% of NHP users had not informed their physician that they were using an NHP. When users had discussed NHP with their physician, less than 5% of physicians responded negatively. Some users felt natural health products were safer (15%) and less expensive (4%) than prescription drugs. 30% used NHP as a last resort for the treatment of a chronic disease. Nearly half (49%) of the users believed that if the government pays for prescription drugs, it should also pay for herbal remedies; 36% said the consumer should pay. In light of the extensive use of NHP by seniors, there is a need for clinical pharmacology studies of these products.

Monte Carlo simulation of complex cohesive fracture in random heterogeneous quasi-brittle materials

A numerical method is developed to simulate complex two-dimensional crack propagation in quasi-brittle materials considering random heterogeneous fracture properties. Potential cracks are represented by pre-inserted cohesive elements with tension and shear softening constitutive laws modelled by spatially varying Weibull random fields. Monte Carlo simulations of a concrete specimen under uni-axial tension were carried out with extensive investigation of the effects of important numerical algorithms and material properties on numerical efficiency and stability, crack propagation processes and load-carrying capacities. It was found that the homogeneous model led to incorrect crack patterns and load–displacement curves with strong mesh-dependence, whereas the heterogeneous model predicted realistic, complicated fracture processes and load-carrying capacity of little mesh-dependence. Increasing the variance of the tensile strength random fields with increased heterogeneity led to reduction in the mean peak load and increase in the standard deviation. The developed method provides a simple but effective tool for assessment of structural reliability and calculation of characteristic material strength for structural design.

Identification of benzimidazole resistance in Cladobotryum dendroides using a PCR-based method

Cladobotryutn dendroides, causal agent of cobweb disease of Agaricus bisporus, has become increasingly resistant to methylbenzimidazole carbamate (MBC) fungicides following the extensive use of MBC in cultivated mushroom production in Ireland. Of 38 isolates of C. dendroides obtained from Irish mushroom units, 34 were resistant to carbendazim. Primers based on conserved regions of the -tubulin gene were used to amplify and sequence a portion of the -tubulin gene in C. dendroides. A point mutation was detected at codon 50 in isolates resistant to benzimidazole fungicides, causing an amino acid substitution from tyrosine to cysteine. Species-specific PCR primers were designed to amplify the region of the -tubulin gene containing this substitution. The point mutation removed an Ace I restriction site in the -tubulin gene sequence of resistant isolates. Digestion of the PCR product with Ace I thus provides a rapid diagnostic test to differentiate sensitive and resistant isolates of this fungus. EMBL accession number: YI2256.

The VLT-FLAMES Tarantula Survey XI. A census of the hot luminous stars and their feedback in 30 Doradus

Context. The VLT-FLAMES Tarantula Survey has an extensive view of the copious number of massive stars in the 30 Doradus (30 Dor) star forming region of the Large Magellanic Cloud. These stars play a crucial role in our understanding of the stellar feedback in more distant, unresolved star forming regions. Aims. The first comprehensive census of hot luminous stars in 30 Dor is compiled within a 10 arcmin (150 pc) radius of its central cluster, R136. We investigate the stellar content and spectroscopic completeness of the early type stars. Estimates were made for both the integrated ionising luminosity and stellar wind luminosity. These values were used to re-assess the star formation rate (SFR) of the region and determine the ionising photon escape fraction. Methods. Stars were selected photometrically and combined with the latest spectral classifications. Spectral types were estimated for stars lacking spectroscopy and corrections were made for binary systems, where possible. Stellar calibrations were applied to obtain their physical parameters and wind properties. Their integrated properties were then compared to global observations from ultraviolet (UV) to far-infrared (FIR) imaging as well as the population synthesis code, Starburst99. Results. Our census identified 1145 candidate hot luminous stars within 150 pc of R136 of which >700 were considered to be genuine early type stars and contribute to feedback. We assess the survey to be spectroscopically complete to 85% in the outer regions (>5 pc) but only 35% complete in the region of the R136 cluster, giving a total of 500 hot luminous stars in the census which had spectroscopy. Only 31 were found to be Wolf-Rayet (W-R) or Of/WN stars, but their contribution to the integrated ionising luminosity and wind luminosity was ~ 40% and ~ 50%, respectively. Similarly, stars with M > 100 M (mostly H-rich WN stars) also showed high contributions to the global feedback, ~ 25% in both cases. Such massive stars are not accounted for by the current Starburst99 code, which was found to underestimate the integrated ionising luminosity of R136 by a factor ~ 2 and the wind luminosity by a factor ~ 9. The census inferred a SFR for 30 Dor of 0.073 ± 0.04 M yr . This was generally higher than that obtained from some popular SFR calibrations but still showed good consistency with the far-UV luminosity tracer as well as the combined Hα and mid-infrared tracer, but only after correcting for Hα extinction. The global ionising output was also found to exceed that measured from the associated gas and dust, suggesting that ~6 % of the ionising photons escape the region. Conclusions. When studying the most luminous star forming regions, it is essential to include their most massive stars if one is to determine a reliable energy budget. Photon leakage becomes more likely after including their large contributions to the ionising output. If 30 Dor is typical of other massive star forming regions, estimates of the SFR will be underpredicted if this escape fraction is not accounted for.

The hydrodynamics of small seabed mounted bottom hinged wave energy converters in shallow water:PhD thesis

This thesis investigates the hydrodynamics of a small, seabed mounted, bottom hinged, wave energy converter in shallow water. The Oscillating Wave Surge Converter is a pitching flap-type device which is located in 10-15m of water to take advantage of the amplification of horizontal water particle motion in shallow water. A conceptual model of the hydrodynamics of the device has been formulated and shows that, as the motion of the flap is highly constrained, the magnitude of the force applied to the flap by the wave is strongly linked to the power absorption.

An extensive set of experiments has been carried out in the wave tank at Queen’s University at both 40th and 20th scales. The experiments have included testing in realistic sea states to estimate device performance as well as fundamental tests using small amplitude monochromatic waves to determine the force applied to the flap by the waves. The results from the physical modelling programme have been used in conjunction with numerical data from WAMIT to validate the conceptual model.

The work finds that tuning the OWSC to the incident wave periods is problematic and only results in a marginal increase in power capture. It is also found that the addition of larger diameter rounds to the edges of the flap reduces viscous losses and has a greater effect on the performance of the device than tuning. As wave force is the primary driver of device performance it is shown that the flap should fill the water column and should pierce the water surface to reduce losses due to wave overtopping.

With the water depth fixed at approximately 10m it is shown that the width of the flap has the greatest impact on the magnitude of wave force, and thus device performance. An 18m wide flap is shown to have twice the absorption efficiency of a 6m wide flap and captures 6 times the power. However, the increase in power capture with device width is not limitless and a 24m wide flap is found to be affected by two-dimensional hydrodynamics which reduces its performance per unit width, especially in sea states with short periods. It is also shown that as the width increases the performance gains associated with the addition of the end effectors reduces. Furthermore, it is shown that as the flap width increases the natural pitching period of the flap increases, thus detuning the flap further from the wave periods of interest for wave energy conversion.

The effect of waves approaching the flap from an oblique angle is also investigated and the power capture is found to decrease with the cosine squared of the encounter angle. The characteristic of the damping applied by the power take off system is found to have a significant effect on the power capture of the device, with constant damping producing between 20% and 30% less power than quadratic damping. Furthermore, it is found that applying a higher level of damping, or a damping bias, to the flap as it pitches towards the beach increases the power capture by 10%.

A further set of experiments has been undertaken in a case study used to predict the power capture of a prototype of the OWSC concept. The device, called the Oyster Demonstrator, has been developed by Aquamarine Power Ltd. and is to be installed at the European Marine Energy Centre, Scotland, in 2009.

The work concludes that OWSC is a viable wave energy converter and absorption efficiencies of up 75% have been measured. It is found that to maximise power absorption the flap should be approximately 20m wide with large diameter rounded edges, having its pivot close to the seabed and its top edge piercing the water surface.

Liouville-space R-matrix-Floquet description of atomic radiative processes involving autoionizing states in the presence of intense electromagnetic fields

A reduced-density-operator description is developed for coherent optical phenomena in many-electron atomic systems, utilizing a Liouville-space, multiple-mode Floquet–Fourier representation. The Liouville-space formulation provides a natural generalization of the ordinary Hilbert-space (Hamiltonian) R-matrix-Floquet method, which has been developed for multi-photon transitions and laser-assisted electron–atom collision processes. In these applications, the R-matrix-Floquet method has been demonstrated to be capable of providing an accurate representation of the complex, multi-level structure of many-electron atomic systems in bound, continuum, and autoionizing states. The ordinary Hilbert-space (Hamiltonian) formulation of the R-matrix-Floquet method has been implemented in highly developed computer programs, which can provide a non-perturbative treatment of the interaction of a classical, multiple-mode electromagnetic field with a quantum system. This quantum system may correspond to a many-electron, bound atomic system and a single continuum electron. However, including pseudo-states in the expansion of the many-electron atomic wave function can provide a representation of multiple continuum electrons. The 'dressed' many-electron atomic states thereby obtained can be used in a realistic non-perturbative evaluation of the transition probabilities for an extensive class of atomic collision and radiation processes in the presence of intense electromagnetic fields. In order to incorporate environmental relaxation and decoherence phenomena, we propose to utilize the ordinary Hilbert-space (Hamiltonian) R-matrix-Floquet method as a starting-point for a Liouville-space (reduced-density-operator) formulation. To illustrate how the Liouville-space R-matrix-Floquet formulation can be implemented for coherent atomic radiative processes, we discuss applications to electromagnetically induced transparency, as well as to related pump–probe optical phenomena, and also to the unified description of radiative and dielectronic recombination in electron–ion beam interactions and high-temperature plasmas.

An accelerated method of developing DBT projects using CDIO partner institutions as parallel processors

The cycle of the academic year impacts on efforts to refine and improve major group design-build-test (DBT) projects since the time to run and evaluate projects is generally a full calendar year. By definition these major projects have a high degree of complexity since they act as the vehicle for the application of a range of technical knowledge and skills. There is also often an extensive list of desired learning outcomes which extends to include professional skills and attributes such as communication and team working. It is contended that student project definition and operation, like any other designed product, requires a number of iterations to achieve optimisation. The problem however is that if this cycle takes four or more years then by the time a project’s operational structure is fine tuned it is quite possible that the project theme is no longer relevant. The majority of the students will also inevitably experience a sub-optimal project experience over the 5 year development period. It would be much better if the ratio were flipped so that in 1 year an optimised project definition could be achieved which had sufficient longevity that it could run in the same efficient manner for 4 further years. An increased number of parallel investigators would also enable more varied and adventurous project concepts to be examined than a single institution could undertake alone in the same time frame.
This work-in-progress paper describes a parallel processing methodology for the accelerated definition of new student DBT project concepts. This methodology has been devised and implemented by a number of CDIO partner institutions in the UK & Ireland region. An agreed project theme was operated in parallel in one academic year with the objective of replacing a multi-year iterative cycle. Additionally the close collaboration and peer learning derived from the interaction between the coordinating academics facilitated the development of faculty teaching skills in line with CDIO standard 10.

Monitoring a toxic bloom of Alexandrium minutum using novel microarray and multiplex surface plasmon resonance biosensor technology

Blooms of Alexandrium occur annually during the summer months in the North Channel of Cork Harbour on the south coast of Ireland. This study monitored an extensive bloom of the toxin producing Alexandrium minutum during the summer of 2011 with the use of the MIDTAL (Microarrays for the Detection of Toxic Algae) microarray and a prototype multiplex surface plasmon resonance (multi SPR) biosensor. Microarray signal intensities and toxin results from three testing platforms of the prototype multi SPR biosensor, commercial (CER) enzyme-linked immunosorbent assay (ELISA) and high performance liquid chromatography (HPLC) were compared against light microscopy counts. The main aim was to demonstrate the use of these methodologies to support national monitoring agencies by providing a faster and more accurate means of identifying and quantifying the harmful phytoplankton community and their toxins in natural water samples. Both the microarray signals and multi SPR biosensor results followed a significant trend with light microscopy results and both techniques indicated detection limits of <4000 cells of A. minutum in natural seawater samples.

The Outcomes of Cross-Cultural Adjustment: A Case of British Expatriates Working on International Architectural, Engineering and Construction Assignments

The main aim of this study is to investigate the consequences of cross-cultural adjustment in an under researched sample of British expatriates working on International Architectural, Engineering and Construction (AEC) assignments. Adjustment is the primary outcome of an expatriate assignment. According to Bhaskar-Srinivas et al., (2005), Harrison et al., (2004) it is viewed to affect other work related outcomes which could eventually predict expatriate success. To address the scarcity of literature on expatriate management in the AEC sector, an exploratory design was adopted. Phase one is characterised by extensive review of extant literature, whereas phase two was qualitative exploration from British expatriates’ perspective; here seven unstructured interviews were carried out. Further, cognitive mapping analysis through Banaxia decision explorer software was conducted to develop a theoretical framework and propose various hypotheses. The findings imply that British AEC firms could sustain their already established competitive advantage in the global marketplace by acknowledging the complexity of international assignments, prioritising expatriate management and offering a well-rounded support to facilitate expatriate adjustment and ultimately achieve critical outcomes like performance, assignment completion and job satisfaction.

The outcomes of cross-cultural adjustment: A case of British expatriates working on international architectural, engineering and construction assignments

The main aim of this study is to investigate the consequences of cross-cultural adjustment in an under researched sample of British expatriates working on International Architectural, Engineering and Construction (AEC) assignments. Adjustment is the primary outcome of an expatriate assignment. According to Bhaskar-Srinivas et al., (2005), Harrison et al., (2004) it is viewed to affect other work related outcomes which could eventually predict expatriate success. To address the scarcity of literature on expatriate management in the AEC sector, an exploratory design was adopted. Phase one is characterised by extensive review of extant literature, whereas phase two was qualitative exploration from British expatriatesÕ perspective; here seven unstructured interviews were carried out. Further, cognitive mapping analysis through Banaxia decision explorer software was conducted to develop a theoretical framework and propose various hypotheses. The findings imply that British AEC firms could sustain their already established competitive advantage in the global marketplace by acknowledging the complexity of international assignments, prioritising expatriate management and offering a well-rounded support to facilitate expatriate adjustment and ultimately achieve critical outcomes like performance, assignment completion and job satisfaction.