Membranas de quitosana micro e macroporosas : preparo, caracterização e estudos de permeabilidade

Two methodologies were proposed to obtain micro and macroporous chitosan membranes, using two different porogenic agents. The methodologies proved to be effective in control the porosity as well as the pore size. Thus, microporous membranes were obtained through the physical blend of chitosan and polyethylene oxide (PEO) on an 80:20 (m/m) ratio, respectively, followed by the partial PEO solubilization in water at 80 ◦C. Macroporous chitosan membranes with asymmetric morphology were obtained using SiO2 as the porogenic agent. In this case, chiotsan-silica ratios used were 1:1, 1:3 and 1:5 (m/m). Membranes characterization were carried out by SEM (scanning electronic microscopy), X-ray diffraction, Fourier Transform Infrared Spectroscopy (FTIR), Thermal analysis (TG, DTG , DSC and DMTA). Permeability studies were performed using two model drugs: sodium sulfamerazine and sulfametoxipyridazine. By transmission FTIR it was possible to confirm the complete removal of SiO2. The SEM images confirmed the porous formation for both micro and macroporous membranes and also determined their respective sizes. By thermal analysis it was possible to show differences related with water sorption capacity as well as thermal stability for both membranes. DTG and DSC allowed evidencing the PEO presence on microporous membranes. The absorbance x time curves obtained on permeability tests for micro and macroporous membranes showed a linear behavior for both drugs in all range of concentration used. It was also observed, through P versus C curves, an increase in permeability of macroporous membranes according to the increase in porosity and also a decrease on P with increase in drug concentration. The influences of the drug molecular structure, as well as test temperatures were also evaluated

Estudos de adsorção de tetraciclina e cromoglicato em partículas de quitosana

Among the polymers that stand out most in recent decades, chitosan, a biopolymer with physico-chemical and biological promising properties has been the subject of a broad field of research. Chitosan comes as a great choice in the field of adsorption, due to their adsorbents properties, low cost and abundance. The presence of amino groups in its chain govern the majority of their properties and define which application a sample of chitosan may be used, so it is essential to determine their average degree of deacetylation. In this work we developed kinetic and equilibrium studies to monitor and characterize the adsorption process of two drugs, tetracycline hydrochloride and sodium cromoglycate, in chitosan particles. Kinetic models and the adsorption isotherms were applied to the experimental data. For both studies, the zeta potential analyzes were also performed. The adsorption of each drug showed distinct aspects. Through the studies developed in this work was possible to describe a kinetic model for the adsorption of tetracycline on chitosan particles, thus demonstrating that it can be described by two kinetics of adsorption, one for protonated tetracycline and another one for unprotonated tetracycline. In the adsorption of sodium cromoglycate on chitosan particles, equilibrium studies were developed at different temperatures, allowing the determination of thermodynamic parameters

Estudos de adsorção de tetraciclina em partículas de quitosana

Due to its physico-chemical and biological properties, related to the abundance and low cost of raw material, chitosan has been recognized as a material of wide application in various fields, such as in drug delivery systems. Many of these properties are associated with the presence of amino groups in its polymer chain. A proper determination of these amino groups is very important, in order to properly specify if a given chitosan sample can be used in a particular application. Thus, in this work, initially, a comparison between the determination of the deacetylation degree by conductometry and elemental analysis was carried out using a detailed analysis of error propagation. It was shown that the conductometric analysis resulted in a simple and safe method for the determining the degree of deacetylation of chitosan. Subsequently, experiments were performed to monitor and characterize the adsorption of tetracycline on chitosan particles through kinetic and equilibrium studies. The main models of kinetics and adsorption isotherms, widely used to describe the adsorption on wastewater treatment systems and the drug loading, were used to treat the experimental data. Firstly, it was shown that an apparent linear t/q(t) × t relationship did not imply in a pseudo-second-order adsorption kinetics, differently of what has been repeatedly reported in the literature. It was found that this misinterpretation can be avoided by using non-linear regression. Finally, the adsorption of tetracycline on chitosan particles was analyzed using insights obtained from theoretical analysis, and the parameters generated were used to analyze the kinetics of adsorption, the isotherm of adsorption and to ropose a mechanism of adsorption

Estudos de sorção de um corante aniônico modelo em partículas de quitosana reticulada

Textile activity results in effluents with a variety of dyes. Among the several processes for dye-uptaking from these wastewaters, sorption is one of the most effective methods, chitosan being a very promising alternative for this end. The sorption of Methyl Orange by chitosan crosslinked particles was approached using equilibrium and kinetic analyses at different pH s. Besides the standard pseudo-order analysis normally effectuated (i.e. pseudo-first-order and pseudo-second-order), a novel approach involving a pseudo-nth-order kinetics was used, nbeing determined via non-linear regression, using the Levenberg-Marquardt method. Zeta potential measurements indicated that electrostatic interactions were important for the sorption process. Regarding equilibrium experiments, data were well fitted to a hybrid Langmuir-Freundlich isotherm, and estimated Gibbs free energy of adsorption as a function of mass of dye per area of chitosan showed that the process of adsorption becomes more homogeneous as the pH of the continuous phase decreased. Considering the kinetics of sorption, although a pseudo-nth-order description yielded good fits, a kinetic equation involving diffusion adsorption phenomena was found to be more consistent in terms of a physicochemical description of the sorption process

Estudos das interações de quitosana/CTAB/C12E8

Surfactant-polymer interactions are widely used when required rheological properties for specific applications, such as the production of fluids for oil exploration. Studies of the interactions of chitosan with cationic surfactants has attracted attention by being able to cause changes in rheological parameters of the systems making room for new applications. The commercial chitosan represents an interesting alternative to these systems, since it is obtained from partial deacetylation of chitin: the residues sites acetylated can then be used for the polymer-surfactant interactions. Alkyl ethoxylated surfactants can be used in this system, since these non-ionic surfactants can interact with hydrophobic sites of chitosan, modifying the rheology of solutions or emulsions resultants, which depends on the relaxation phenomenon occurring in these systems. In this work, first, inverse emulsions were prepared from chitosan solution as the dispersed phase and cyclohexane as the continuous phase were, using CTAB as a surfactant. The rheological analysis of these emulsions showed pronounced pseudoplastic behavior. This behavior was attributed to interaction of "loops" of chitosan chains. Creep tests were also performed and gave further support to these discussions. Subsequently, in order to obtain more information about the interaction of chitosan with non-ionic surfactants, solutions of chitosan were mixed with C12E8 and and carried out rheological analysis and dynamic light scattering. The systems showed marked pseudoplastic behavior, which became less evident when the concentration of surfactant was increased. Arrhenius and KWW equations were used to obtain parameters of the apparent activation energy and relaxation rate distribution, respectively, to which were connected to the content of surfactant and temperature used in this work

Entendendo as propriedades do arenito Botucatu e sua utilização como meio poroso para estudos envolvendo o deslocamento de fluidos poliméricos

The development of products whose purpose is to promote blockages in high permeability zones as well as to control the hydrate or scale formation also needs some tests in porous media before using the product in the field, where attempts and unavoidable operational errors costs would able to derail any projects. The aim of this study was to analyze and compare the Botucatu and Berea sandstones properties, involving problems related to loss permeability. It was observed that even cores of Berea, without expansible clays in their composition had their permeability reduced, as soon as the salinity of brine reached a lower limit. As expected, the same happened with the Botucatu sandstone samples, however, in this case, the sensitivity to low salinity was more pronounced. In a second phase, the research was focused on the Botucatu Sandstone behavior front of dilute polymer solutions injection, checking the main relationships between the Rock / Fluid interactions, considering the Mobility Reduction, Resistance and Residual Resistance Factors, as well as adsorption/desorption processes of these polymers, and the polymer molecules average size and porous sandstone average size ratio. The results for both phases showed a real feasibility of using the Botucatu sandstone in laboratory tests whose objective is the displacement of fluids through porous media

Estudos epidemiológicos e controle químico de Phakopsora euvitis

Em janeiro de 2003 foram constatados sintomas típicos de ferrugem em folhas maduras de videira (Vitis vinifera), nas áreas experimentais da Universidade Estadual Paulista, Campus de Ilha Solteira, em Selvíria - MS e Ilha Solteira - SP. Este é o primeiro relato desta doença da videira no Centro-Oeste do Brasil. Considerando a intensidade da doença, a importância da cultura da videira na região e a falta de informações sobre a ferrugem, os objetivos deste trabalho foram: reconfirmar a patogenicidade de Phakopsora euvitis; estudar a influência da luz e da temperatura na germinação de urediniósporos; estudar o efeito do tipo de superfície na germinação de urediniósporos; determinar a longevidade in vivo de urediniósporos e avaliar a eficiência agronômica de fungicidas para o controle da ferrugem. Sintomas da ferrugem foram verificados somente em folhas maduras de videira. A temperatura de 25 ºC, no escuro, e a superfície inferior da folha de videira foram as melhores condições para a germinação de urediniósporos de P. euvitis. A germinação dos urediniósporos foi reduzida em 94%, em folhas de videira que foram retiradas das plantas e mantidas durante sete dias na superfície do solo. em dois experimentos realizados em campo constatou-se que os fungicidas tebuconazole, propiconazole e azoxystrobin proporcionaram as menores intensidades da doença. Tebuconazole apresentou-se como o fungicida mais eficiente no controle da ferrugem. No geral, maior intensidade da ferrugem foi observada em videira conduzida no sistema de espaldeira.

Estudos de avaliação quantitativa e qualitativa de linguagens documentárias: uma síntese bibliográfica

Este estudo apresenta uma síntese bibliográfica sobre as metodologias de avaliação que foram propostas por pesquisadores internacionais e nacionais e utilizadas por indexadores de instituições de ensino e/ou pesquisas atuantes em unidades de informação e/ou centros de documentação, bem como aquelas que foram analisadas pelas opiniões dos próprios usuários da informação registrada e disponibilizada em inúmeros sistemas de informações, com enfoques nas abordagens quantitativa, qualitativa e qualitativa/cognitiva, respectivamente.

GT4CCI: uma abordagem baseada em grounded theory para a identificação de interesses transversais em documentos de requisitos

When crosscutting concerns identification is performed from the beginning of development, on the activities involved in requirements engineering, there are many gains in terms of quality, cost and efficiency throughout the lifecycle of software development. This early identification supports the evolution of requirements, detects possible flaws in the requirements specification, improves traceability among requirements, provides better software modularity and prevents possible rework. However, despite these several advantages, the crosscutting concerns identification over requirements engineering faces several difficulties such as the lack of systematization and tools that support it. Furthermore, it is difficult to justify why some concerns are identified as crosscutting or not, since this identification is, most often, made without any methodology that systematizes and bases it. In this context, this paper proposes an approach based on Grounded Theory, called GT4CCI, for systematizing and basing the process of identifying crosscutting concerns in the initial stages of the software development process in the requirements document. Grounded Theory is a renowned methodology for qualitative analysis of data. Through the use of GT4CCI it is possible to better understand, track and document concerns, adding gains in terms of quality, reliability and modularity of the entire lifecycle of software

Identificando interesses transversais em modelos de requisitos PL-AOVgraph

The occurrence of problems related to the scattering and tangling phenomenon, such as the difficulty to do system maintenance, increasingly frequent. One way to solve this problem is related to the crosscutting concerns identification. To maximize its benefits, the identification must be performed from early stages of development process, but some works have reported that this has not been done in most of cases, making the system development susceptible to the errors incidence and prone to the refactoring later. This situation affects directly to the quality and cost of the system. PL-AOVgraph is a goal-oriented requirements modeling language which offers support to the relationships representation among requirements and provides separation of crosscutting concerns by crosscutting relationships representation. Therefore, this work presents a semi-automatic method to crosscutting concern identification in requirements specifications written in PL-AOVgraph. An adjacency matrix is used to identify the contributions relationships among the elements. The crosscutting concern identification is based in fan-out analysis of contribution relationships from the informations of adjacency matrix. When identified, the crosscutting relationships are created. And also, this method is implemented as a new module of ReqSys-MDD tool

O Turismo como um tema de pesquisa: um diálogo epistemológico a partir das produções dos programas de pós-graduação stricto sensu da Universidade Federal do Rio Grande do Norte, no período de 2007 a 2011

The study consists in an analysis of researches with tourism issues, in Master s and Doctoral level, investigating their epistemological trends, regarding the type of study that is being produced and the methods used. It is characterized as exploratory, documental and bibliographical, having undertaken a cross-sectional study which covers the period from 2007 to 2011. It analyzes the context of academically production in tourism, the nature of these researches, the methodological aspects adopted in these theses and dissertations, the philosophical inclinations and the coherence and contribution of the same. This research uses, the Digital Library of Theses and Dissertations (BDTD) and the secretariats of the Academic Centers of the Federal University of Rio Grande do Norte (UFRN) as means to collect data. It employs the technique of sampling by judgment and undertakes the research in various Academic Centers in UFRN, using the method of content analysis. It shows that, from the 643 studies analyzed, 43 of them have themes related to tourism, which characterized this study sample. This study realizes that PPGA is the largest producer of researches on tourism issues, ahead of PPGTur, which ranks the third position, in this aspect. Also realizes that all surveys analyzed are crosssectional and the theme further investigated, with 21% of the sample, is related to the marketing aspects of tourism, with the theme Directors of Hotels and Restaurants (DHR) . This research demonstrates that all sample surveys make use of interviews, and these are, mostly, structured. Also realizes that most of these studies, with 21% of the sample, employ the method of content analysis. The references in Portuguese are surveyed about five times more than the ones in other languages. It estimates that more than half of the sample is characterized as positivist, associated with aspects of functionalism. A minority of 21% of these researches seeks to identify and recommend solutions to the tourism issues, or even represent part of them. This research concludes that the studies in tourism are mostly unifocal, being driven by issues related to the touristic trade. PPGTur produces a number still unrepresentative of studies. The theses and dissertations of the sample are limited and/or unable to analyze the changes of the phenomenon caused by the time. The studies from the sample present criteria and make use of other methods and techniques to associate with the interviews and content analysis to obtain more solid and reliable data and results. They use a low number of references in languages other than Portuguese. Most of these studies, characterized as positivist-functionalist, investigate the functioning, planning, coordination and expectations in organizations, leaving aside other issues, also relevant for tourism. The number of studies aimed at identifying solutions to the problems of tourism, or that even represents part of them, is not expressive

Estudos sobre dançatividade: dança – corpo – performance

A partir de trabalhos que questionam limites de linguagens artísticas, discute-se o termo dançatividade enquanto potência do corpo-artista. A escolha dos trabalhos se orientou pela percepção de tal potência como impulso para a desterritorialização dos campos específicos da dança para se re-territorializar em outro campo de fronteira pela própria experiência do corpo

Aspectos metodológicos relacionados aos sistemas manométricos utilizados em estudos hemodinâmicos

Atualmente, diante das técnicas atuais, a manometria tem sido relegada a plano secundário durante a cateterização cardíaca. No entanto, ainda fornece importantes informações para identificação e avaliação das doenças cardiovasculares. Os dados coletados durante os exames possibilitam a obtenção de variáveis quantitativas e qualitativas, as quais podem ser comparadas aos padrões normais. Os sistemas manométricos são compostos por transdutor, amplificador e registrador, que, em conjunto, devem espelhar com fidelidade a morfologia e os valores das variáveis analisadas. Para atingir esse objetivo, é necessário desempenho adequado de todos os componentes. Se uma determinada informação é de extrema relevância, o operador deve gastar tempo suficiente para obtê-la de maneira inequívoca. Assim, o operador deve estar familiarizado com os sistemas manométricos e com as fontes de erro relacionadas com as técnicas de registro, cateteres, conectores e fluidos. Com os fundamentos analisados neste manuscrito, salientamos que deve ser dispensada atenção às ondas de pressão usadas nas interpretações da fisiopatologia das doenças cardiovasculares.

Sistema de aquisição de dados para estudos de transiente de pressão e detecção de vazamentos em oleodutos

In February 2011, the National Agency of Petroleum, Natural Gas and Biofuels (ANP) has published a new Technical Rules for Handling Land Pipeline Petroleum and Natural Gas Derivatives (RTDT). Among other things, the RTDT made compulsory the use of monitoring systems and leak detection in all onshore pipelines in the country. This document provides a study on the method for detection of transient pressure. The study was conducted on a industrial duct 16" diameter and 9.8 km long. The pipeline is fully pressurized and carries a multiphase mixture of crude oil, water and natural gas. For the study, was built an infrastructure for data acquisition and validation of detection algorithms. The system was designed with SCADA architecture. Piezoresistive sensors were installed at the ends of the duct and Digital Signal Processors (DSPs) were used for sampling, storage and processing of data. The study was based on simulations of leaks through valves and search for patterns that characterize the occurrence of such phenomena