Estudo da viabilidade de implantação de plantas para conversão de energia térmica do oceano (OTEC) no Brasil

Pós-graduação em Engenharia Mecânica - FEIS

Microsatellite loci in the oceanic whitetip shark and cross-species amplification using pyrosequencing technology

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Frequency tunable continuous THz wave generation in a periodically poled fiber

An all-fiber approach to terahertz generation using a periodically poled optical fiber is proposed and experimentally demonstrated. In the proposed approach, a continuous-wave THz wave is generated at a periodically poled fiber by beating two optical wavelengths from two laser sources with the wavelength spacing corresponding to the frequency of the THz wave. The key component in the system is the periodically poled fiber, which is made by a twin-hole fiber with the fiber core residing between two holes. The twin-hole fiber is then thermally poled at a temperature of similar to 260 degrees C with a voltage of 3.3 kV applied to the silver electrodes inside the two holes to introduce second-order nonlinearity. The quasi phase matching (QPM) condition is achieved by periodically erasing the thermal poling induced second-order nonlinearity with an ultraviolet laser, which enhances the energy conversion efficiency. The proposed approach is validated by an experiment. The emission of a THz wave centered at 3.8 THz with an output power of 0.5 mu W is observed. The frequency tunability between 2.2 and 3.8 THz is also experimentally demonstrated.

O papel dos consumidores residencias no ambiente das redes inteligentes: medidores eletrônicos de energia

Pós-graduação em Engenharia Mecânica - FEG

Análise da viabilidade do uso de biogás gerado a partir de dejetos bovinos em microturbinas para fins de geração, cogeração e trigeração de energia

The use of digesters has become an important alternative for the proper disposal of organic agricultural wastes, serving as a solution to some environmental and health problems. Furthermore, the process of digestion provides commercially valuable by products such as biogas and bio fertilizer. The generation of biogas from agricultural waste, and its use in power generation systems has aroused great interest in rural areas because it enables supply in whole or in large part the energy demand of ownership by reducing production costs. The advent of technology has brought new forms of energy conversion of biogas, as the use of micro turbines specifies to be fuelled with biogas derived from the decomposition of organic matter in digesters, since it has a low level of methane in its composition, and high degree of impurities such as hydrogen sulphide, which are harmful to equipment and reduce the calorific value of biogas. The use of micro turbines behind other advantages like low emissions, great fuel flexibility and low maintenance. This paper presents an analysis of the feasibility of using biogas generated from cattle manure in micro turbines to generate electricity. Behind also an assessment of the energy potential that each animal has on various uses of biogas, and forms of energy recovery from the exhaust gases of the micro turbine. Also conducts an evaluation of the energy savings that the use of biogas aggregates properties.

The feasibility of using wind energy for rural populations lacking electric power in Brazil

In the wake of current global image involving environmental impacts, the use of wind power has had a remarkable growth in recent years as a technique for generating electricity. In fact, it is a source featuring strong dissemination of technology which provides decrease in costs and a greater access to low-income electricity. PROINFA (Incentive Program for Alternative Energy Sources) promotes a greater diffusion of new technologies for power generation, in particular wind-produced. Due to such a scenario on the exploitation of such energy source, current analysis discusses strategies for the development of domestic wind technology and the implications for electricity-lacking rural areas. Analysis shows a similar behavior between rural populations lacking electricity and the amount of potential energy available in the region. It is expected that this assay will contribute towards the establishment of public policies for wind-energy parks on rural farms in the North and Northeast regions of Brazil.

Viabilidade econômica do uso do biogás proveniente da suinocultura em substituição a fontes externas de energia

The swine culture potentially generates waste with high organic load and pollutants, being responsible for the spread of pathogens, contamination of rivers, groundwater and soils, besides it produces foul odors and emit greenhouse gases. However, the high amount of organic matter, which expresses the amount of pollutant load, reflects the energetic potential of these wastes used as raw material in biogas generation through technology of digesters. The properly use of theses digesters provides the production of clean energy and promotes the conservation of the environment. The economic viability of the implantation of an Indian model digester on a small swine farm was verified based on the value from initial investments of deployment, maintenance costs, depreciation, and on the interest and revenues arising from the system. Besides, the amount of biogas produced daily and the average consumption of biogas by the most common used devices such as refrigerator, stove, water heater, and generator of electricity was calculated.. For a backdrop of 10 years, the results of economic indicators NPV of BRL 57,598.95, IRR of 48.38%, Simple Payback of 2.06 years, and Discounted Payback of 2.3 years, demonstrated a favorable outlook for the use of this technology, with the possibility to generate economic, social and environmental benefits.

Estimativa do potencial de acréscimo da oferta de energia no setor sucroalcooleiro paulista a partir de cogeração e gaseificação do bagaço de cana-de-açúcar com utilização de ciclo combinado

This work evaluates the existing potential in the state of Sao Paulo for the generation of electrical energy using the sugar cane bagasse as fuel. As the bagasse is a by-product of the sugarcane and alcohol industry and it is produced in large scale in the country, mainly in the state of Sao Paulo, it is important to develop researches that aim the best utilization of this input. In order to determine its potential, at first, a study was conducted considering the utilization of the cogeneration, which is a common practice in the plants of the sector. However, it was concluded that the cogeneration could provide a higher quantity of energy if more modern technologies and more efficient processes were used. Another study to estimate the potential considered a system of gasification of the sugar cane bagasse integrated with the combined cycle (BIG/GTCC). It was concluded that this technology can provide a considerable increase in the electrical supply. In this work it was also developed an energetic study based on real data from a plant located in the state of Sao Paulo. A thermodynamic analysis was done in the existing equipment of the cogeneration section of the plant. And another analysis was done considering the implementation of the BIG/GTCC technology to the cogeneration system. Comparing the results of both settings, it was concluded that the utilization of the sugar cane bagasse integrated to a combined cycle increased considerably the efficiency in the generation of electricity of the plant, increasing more than six times its production capacity of electrical energy

Estimativa do potencial de acréscimo da oferta de energia no setor sucroalcooleiro paulista a partir de cogeração e gaseificação do bagaço de cana-de-açúcar com utilização de ciclo combinado

This work evaluates the existing potential in the state of Sao Paulo for the generation of electrical energy using the sugar cane bagasse as fuel. As the bagasse is a by-product of the sugarcane and alcohol industry and it is produced in large scale in the country, mainly in the state of Sao Paulo, it is important to develop researches that aim the best utilization of this input. In order to determine its potential, at first, a study was conducted considering the utilization of the cogeneration, which is a common practice in the plants of the sector. However, it was concluded that the cogeneration could provide a higher quantity of energy if more modern technologies and more efficient processes were used. Another study to estimate the potential considered a system of gasification of the sugar cane bagasse integrated with the combined cycle (BIG/GTCC). It was concluded that this technology can provide a considerable increase in the electrical supply. In this work it was also developed an energetic study based on real data from a plant located in the state of Sao Paulo. A thermodynamic analysis was done in the existing equipment of the cogeneration section of the plant. And another analysis was done considering the implementation of the BIG/GTCC technology to the cogeneration system. Comparing the results of both settings, it was concluded that the utilization of the sugar cane bagasse integrated to a combined cycle increased considerably the efficiency in the generation of electricity of the plant, increasing more than six times its production capacity of electrical energy

Making the case for grid-connected photovoltaics in Brazil

In the developed world, grid-connected photovoltaics (PVs) are the fastest-growing segment of the energy market. From 1999 to 2009, this industry had a 42% compound annual growth-rate. From 2009 to 2013, it is expected to grow to 45%, and in 2013 the achievement of grid parity - when the cost of solar electricity becomes competitive with conventional retail (including taxes and charges) grid-supplied electricity - is expected in many places worldwide. Grid-connected PV is usually perceived as an energy technology for developed countries, whereas isolated, stand-alone PV is considered as more suited for applications in developing nations, where so many individuals still lack access to electricity. This rationale is based on the still high costs of PV when compared with conventional electricity. We make the case for grid-connected PV generation in Brazil, showing that with the declining costs of PV and the rising prices of conventional electricity, urban populations in Brazil will also enjoy grid parity in the present decade. We argue that governments in developing nations should act promptly and establish the mandates and necessary conditions for their energy industry to accumulate experience in grid-connected PV, and make the most of this benign technology in the near future. (C) 2010 Elsevier Ltd. All rights reserved.

Mesh Generation and Isogeometric Analysis

[EN]We present advances of the meccano method [1,2] for tetrahedral mesh generation and volumetric parameterization of solids. The method combines several former procedures: a mapping from the meccano boundary to the solid surface, a 3-D local refinement algorithm and a simultaneous mesh untangling and smoothing. The key of the method lies in defining a one-to-one volumetric transformation between the parametric and physical domains. Results with adaptive finite elements will be shown for several engineering problems. In addition, the application of the method to T-spline modelling and isogeometric analysis [3,4] of complex geometries will be introduced…

Towards the generation of photoactive nanomaterials: a supramolecular approach

Objective of these four first chapters is to have a complete understanding of the supramolecular organisation of several complementary modules able to form 2-D networks first in solution using optical spectroscopy measurements as function of solvent polarity , concentration and temperature, and then on solid surface using microscopy techniques such as STM, AFM and TEM. The last chapter presents another type of supramolecular material for application in solar cells technology involving fullerenes and OPV systems. We describes the photoinduced energy and electron process using transient absorption experiments. All these systems provide an exceptional example for the potential of the supramolecular approach as an alternative to the restricted lithographic method for the fabrication of adressable molecular devices.

Wide-scale population genomics of Atlantic bluefin tuna (Thunnus thynnus) inferred by novel high-throughput technology

My PhD project was focused on Atlantic bluefin tuna, Thunnus thynnus, a fishery resource overexploited in the last decades. For a better management of stocks, it was necessary to improve scientific knowledge of this species and to develop novel tools to avoid collapse of this important commercial resource. To do this, we used new high throughput sequencing technologies, as Next Generation Sequencing (NGS), and markers linked to expressed genes, as SNPs (Single Nucleotide Polymorphisms). In this work we applied a combined approach: transcriptomic resources were used to build cDNA libreries from mRNA isolated by muscle, and genomic resources allowed to create a reference backbone for this species lacking of reference genome. All cDNA reads, obtained from mRNA, were mapped against this genome and, employing several bioinformatics tools and different restricted parameters, we achieved a set of contigs to detect SNPs. Once a final panel of 384 SNPs was developed, following the selection criteria, it was genotyped in 960 individuals of Atlantic bluefin tuna, including all size/age classes, from larvae to adults, collected from the entire range of the species. The analysis of obtained data was aimed to evaluate the genetic diversity and the population structure of Thunnus thynnus. We detect a low but significant signal of genetic differentiation among spawning samples, that can suggest the presence of three genetically separate reproduction areas. The adult samples resulted instead genetically undifferentiated between them and from the spawning populations, indicating a presence of panmictic population of adult bluefin tuna in the Mediterranean Sea, without different meta populations.

Analysis of charge-transport properties in GST materials for next generation phase-change memory devices

The quest for universal memory is driving the rapid development of memories with superior all-round capabilities in non-volatility, high speed, high endurance and low power. The memory subsystem accounts for a significant cost and power budget of a computer system. Current DRAM-based main memory systems are starting to hit the power and cost limit. To resolve this issue the industry is improving existing technologies such as Flash and exploring new ones. Among those new technologies is the Phase Change Memory (PCM), which overcomes some of the shortcomings of the Flash such as durability and scalability. This alternative non-volatile memory technology, which uses resistance contrast in phase-change materials, offers more density relative to DRAM, and can help to increase main memory capacity of future systems while remaining within the cost and power constraints. Chalcogenide materials can suitably be exploited for manufacturing phase-change memory devices. Charge transport in amorphous chalcogenide-GST used for memory devices is modeled using two contributions: hopping of trapped electrons and motion of band electrons in extended states. Crystalline GST exhibits an almost Ohmic I(V) curve. In contrast amorphous GST shows a high resistance at low biases while, above a threshold voltage, a transition takes place from a highly resistive to a conductive state, characterized by a negative differential-resistance behavior. A clear and complete understanding of the threshold behavior of the amorphous phase is fundamental for exploiting such materials in the fabrication of innovative nonvolatile memories. The type of feedback that produces the snapback phenomenon is described as a filamentation in energy that is controlled by electron–electron interactions between trapped electrons and band electrons. The model thus derived is implemented within a state-of-the-art simulator. An analytical version of the model is also derived and is useful for discussing the snapback behavior and the scaling properties of the device.

Caratterizzazione genomica di virus influenzali suini in Italia mediante next generation sequencing

I sottotipi H1N1, H1N2 e H3N2 di influenza A virus sono largamente diffusi nella popolazione suina di tutto il mondo. Nel presente lavoro è stato sviluppato un protocollo di sequenziamento di c.d. nuova generazione, su piattaforma Ion Torrent PGM, idoneo per l’analisi di tutti i virus influenzali suini (SIV). Per valutare l’evoluzione molecolare dei SIV italiani, sono stati sequenziati ed analizzati mediante analisi genomica e filogenetica un totale di sessantadue ceppi di SIV appartenenti ai sottotipi H1N1, H1N2 e H3N2, isolati in Italia dal 1998 al 2014. Sono stati evidenziati in sei campioni due fenomeni di riassortimento: tutti i SIV H1N2 esaminati presentavano una neuraminidasi di derivazione umana, diversa da quella dei SIV H1N2 circolanti in Europa, inoltre l’emoagglutinina (HA) di due isolati H1N2 era originata dal riassortimento con un SIV H1N1 avian-like. L’analisi molecolare dell’HA ha permesso di rivelare un’inserzione di due amminoacidi in quattro SIV H1N1 pandemici e una delezione di due aminoacidi in quattro SIV H1N2, entrambe a livello del sito di legame con il recettore cellulare. E’ stata inoltre evidenziata un’elevata omologia di un SIV H1N1 con ceppi europei isolati negli anni ’80, suggerendo la possibile origine vaccinale di questo virus. E’ stato possibile, in aggiunta, applicare il nuovo protocollo sviluppato per sequenziare un virus influenzale aviare altamente patogeno trasmesso all’uomo, direttamente da campione biologico. La diversità genetica nei SIV esaminati in questo studio conferma l’importanza di un continuo monitoraggio della costellazione genomica dei virus influenzali nella popolazione suina.