The direct determination of rare earth elements in basaltic and related rocks using ICP-MS: Testing the efficiency of microwave oven sample decomposition procedures

Tests are described showing the results obtained for the determination of REE and the trace elements Rb, Y, Zr, Nb, Cs, Ba, Hf, Ta, Pb, Th and U with ICP-MS methodology for nine basaltic reference materials, and thirteen basalts and amphibolites from the mafic-ultramafic Niquelandia Complex, central Brazil. Sample decomposition for the reference materials was performed by microwave oven digestion (HF and HNO(3), 100 mg of sample), and that for the Niquelandia samples also by Parr bomb treatment (5 days at 200 degrees C, 40 mg of sample). Results for the reference materials were similar to published values, thus showing that the microwave technique can be used with confidence for basaltic rocks. No fluoride precipitates were observed in the microwave-digested solutions. Total recovery of elements, including Zr and Hf, was obtained for the Niquelandia samples, with the exception of an amphibolite. For this latter sample, the Parr method achieved a total digestion, but not so the microwave decomposition; losses, however, were observed only for Zr and Hf, indicating difficulty in dissolving Zr-bearing minerals by microwave acid attack.

ANTISYMMETRIC ELEMENTS IN GROUP RINGS II

Let R be a commutative ring, G a group and RG its group ring. Let phi : RG -> RG denote the R-linear extension of an involution phi defined on G. An element x in RG is said to be phi-antisymmetric if phi(x) = -x. A characterization is given of when the phi-antisymmetric elements of RG commute. This is a completion of earlier work.

Lie properties of symmetric elements in group rings

Let * be an involution of a group G extended linearly to the group algebra KG. We prove that if G contains no 2-elements and K is a field of characteristic p, 0 2, then the *-symmetric elements of KG are Lie nilpotent (Lie n-Engel) if and only if KG is Lie nilpotent (Lie n-Engel). (C) 2008 Elsevier Inc. All rights reserved.

Nuclear elements of degree 6 in the free alternative algebra

We construct five new elements of degree 6 in the nucleus of the free alternative algebra. We use the representation theory of the symmetric group to locate the elements. We use the computer algebra system ALBERT and an extension of ALBERT to express the elements in compact form and to show that these new elements are not a consequence of the known clegree-5 elements in the nucleus. We prove that these five new elements and four known elements form a basis for the subspace of nuclear elements of degree 6. Our calculations are done using modular arithmetic to save memory and time. The calculations can be done in characteristic zero or any prime greater than 6, and similar results are expected. We generated the nuclear elements using prime 103. We check our answer using five other primes.

Use of copper and gold electrodes as sensitive elements for fabrication of an electronic tongue: Discrimination of wines and whiskies

A low-cost method is proposed to classify wine and whisky samples using a disposable voltammetric electronic tongue that was fabricated using gold and copper substrates and a pattern recognition technique (Principal Component Analysis). The proposed device was successfully used to discriminate between expensive and cheap whisky samples and to detect adulteration processes using only a copper electrode. For wines, the electronic tongue was composed of copper and gold working electrodes and was able to classify three different brands of wine and to make distinctions regarding the wine type, i.e., dry red, soft red, dry white and soft white brands. Crown Copyright (C) 2011 Published by Elsevier B.V. All rights reserved.

Effects of alloying elements on the cytotoxic response of titanium alloys

Titanium alloys, alloys, especially beta-type alloys containing beta-stabilizing elements, constitute a highly versatile category of metallic materials that have been under constant development for application in orthopedics and dentistry. This type of alloy generally presents a high mechanical strength-to-weight ratio, excellent corrosion resistance and low elastic modulus. The purpose of this study is to evaluate the cytotoxicity and adhesion of fibroblast cells on titanium alloy substrates containing Nb, Ta, Zr, Cu, Sn and Mo alloying elements. Cells cultured on polystyrene were used as controls. In vitro results with Vero cells demonstrated that the tested materials, except Cu-based alloy, presented high viability in short-term testing. Adhesion of cells cultured on disks showed no differences between the materials and reference except for the Ti-Cu alloy, which showed reduced adhesion attributed to poor metabolic activity. Titanium alloys with the addition of Nb, Ta, Zr, Sn and Mo elements show a promising potential for biomedical applications. (C) 2011 Elsevier B.V. All rights reserved.

Carbon-dispersed Pt-Rh nanoparticles for ethanol electro-oxidation. Effect of the crystallite size and of temperature

This work presents results of studies of carbon-dispersed Pt-Rh (1:1) nanoparticles as electrocatalysts for the ethanol electro-oxidation. The influences of the crystallite size and the cell temperature on the yields of CO2, acetaldehyde and acetic acid are investigated. Metal nanoparticles were prepared by two different routes: (1) impregnation on carbon powder followed by thermal reduction on hydrogen atmosphere and (2) chemical reduction of the precursor salts. The surface active area and the electrochemical activity of the electrocatalysts were estimated by CO stripping and cyclic voltammetry in the absence and in the presence of ethanol, respectively. Reaction intermediates and products were analyzed by in situ Fourier Transform Infra-Red Spectroscopy (FTIR) and Differential Electrochemical Mass Spectrometry (DEMS). The electrochemical stripping of CO and the electrochemical ethanol oxidation were slightly faster on the Pt-Rh electrocatalysts compared to Pt/C. Also, in situ FTIR spectra and DEMS measurements evidenced that the CO2/acetaldehyde and the CO2/acetic acid ratios are higher for the Pt-Rh/C materials in relation to Pt/C. This was ascribed to the activation of the C-C bond breaking by Rh, this being more prominent for the materials with smaller crystallite sizes. (C) 2008 Elsevier B.V. All rights reserved.

Knowledge translation in Uganda : a qualitative study of Ugandan midwives' and managers' perceived relevance of the sub-elements of the context cornerstone in the PARIHS framework

BACKGROUND: A large proportion of the annual 3.3 million neonatal deaths could be averted if there was a high uptake of basic evidence-based practices. In order to overcome this 'know-do' gap, there is an urgent need for in-depth understanding of knowledge translation (KT). A major factor to consider in the successful translation of knowledge into practice is the influence of organizational context. A theoretical framework highlighting this process is Promoting Action on Research Implementation in Health Services (PARIHS). However, research linked to this framework has almost exclusively been conducted in high-income countries. Therefore, the objective of this study was to examine the perceived relevance of the subelements of the organizational context cornerstone of the PARIHS framework, and also whether other factors in the organizational context were perceived to influence KT in a specific low-income setting. METHODS: This qualitative study was conducted in a district of Uganda, where focus group discussions and semi-structured interviews were conducted with midwives (n = 18) and managers (n = 5) within the catchment area of the general hospital. The interview guide was developed based on the context sub-elements in the PARIHS framework (receptive context, culture, leadership, and evaluation). Interviews were transcribed verbatim, followed by directed content analysis of the data. RESULTS: The sub-elements of organizational context in the PARIHS framework--i.e., receptive context, culture, leadership, and evaluation--also appear to be relevant in a low-income setting like Uganda, but there are additional factors to consider. Access to resources, commitment and informal payment, and community involvement were all perceived to play important roles for successful KT. CONCLUSIONS: In further development of the context assessment tool, assessing factors for successful implementation of evidence in low-income settings--resources, community involvement, and commitment and informal payment--should be considered for inclusion. For low-income settings, resources are of significant importance, and might be considered as a separate subelement of the PARIHS framework as a whole.

Green logistics: key elements for a well-functioning sustainable logistics system

A growing awareness of the modern society about the direct relationship between a growing global community with increasing total industrial activities on one hand and various environmental problems and a natural limitation of natural resources on the other hand set the base for sustainable or “green” approaches within the supply chain. This paper therefore will look at the issue of “Green Logistics” which seeks to reduce the environmental impact of logistics activities by taking into account functions such as recycling, waste and carbon emission reduction and the use of alternative sources of energy. In order to analyze how these approaches and ideas are being perceived by the system as a whole two models from the area of prospective and scenario planning are being used and described to identify the main drivers and tendencies within the system in order to create feasible hypothesis. Using the URCA/CHIVAS model allows us to identify the driver variables out of a high number of variables that best describe the system “Green Logistics”. Followed by the analysis of the actor’s strategies in the system with the Mactor model it is possible to reduce the complexity of a completely holistic system to a few key drivers that can be analyzed further on. Here the implications of URCA/CHIVAS and Mactor are being used to formulate hypotheses about the perception of Green Logistics and its successful implementation among logistics decision makers by an online survey. This research seeks to demonstrate the usefulness of scenario planning to a highly complex system observing it from all angles and extracting information about the relevant factors of it. The results of this demonstration indicate that there are drivers much beyond the factory walls that need to be considered when implementing successfully a system such as Green Logistics.

Illegitimate identity in the middle of an ideological crisis and tensions in the consumption network: a study on why plus-size fashion brands are illegitimate fashion elements

O presente trabalho explora as causas pelas quais o campo da moda plus size carece de legitimidade com as consumidoras plus size. Eu explorei o assunto em três artigos. No primeiro, eu estudo o processo de legitimação de um novo mercado emergente, o mercado da moda plus size brasileira e os desafios para sua a institucionalização. Eu conduzi dezessete entrevistas com consumidoras plus size, uma netnografia em quatro blogs de moda plus size brasileiros e analisei de maneira semiótica um site que vende roupas de moda plus size. Meus resultados indicam que, apesar de ter atores legítimos que promovem essas marcas de moda plus size, o campo da moda plus size ainda é percebido como uma versão vergonhosa do campo da moda. Defendo aqui que o fato de uma das lógicas de campo da moda plus size ser estigma, acaba afetando os projetos identitários das consumidoras de maneira depreciativa, de forma elas não se envolvem em práticas de capital cultural que ocorrem dentro do campo da moda plus size. No segundo artigo, eu conduzi uma introspecção genealógica em que eu pesquisei questões de identidade. Como uma mulher (que se assume ) plus size, eu imaginei que seria relevante para olhar para dentro de mim mesma, a fim de explorar a forma como a minha identidade liga-se com a rede semiótica-material que me rodeia em termos de moda, alimentos e outros elementos. Meus dados vieram tanto de técnicas de introspecção simultâneas, quanto retrospectivas. Em termos teóricos, eu usei a ideia de ―assemblages‖ e eu foquei minha análise tanto nos aspectos materiais da minha rede de consumo, quanto na estabilidade da rede. As consequências da minha assemblage estão ligadas a uma gestão de qualidade total da minha identidade, tanto online como off-line, refletidas em práticas de consumo que se conectam à ideia de uma lógica de consumo bulímica em que o consumo de alimentos e gestão corpo estão interligadas. Por fim, no meu terceiro artigo, eu explorei o conceito de identidade a partir do consumo da moda feminina plus size. Foram feitas catorze entrevistas fenomenológicas, cujos dados foram analisados a partir de uma perspectiva hermenêutica. Três categorias temáticas emergiram da análise de dados: a construção da identidade por meio da moda, elementos de identidade plus size e estratégias criativas para lidar com a falta de produtos para mulheres plus size no varejo. Entre os principais resultados, destacam-se a forma como o termo plus size atua como estigma, influenciando projetos de identidade das consumidoras, o papel do varejo no processo de estigmatização e a saga épica de compras, que envolve um "mercado negro", com a participação de vendedores. Eu concluo discutindo o papel da identidade na instabilidade do campo da moda plus size.

Adição de nanopartículas de Ti em matriz de Fe através da deposição por magnetron sputtering

Microalloyed steels constitute a specific class of steel with low amount of carbon and microalloying elements such as Vanadium (V), Niobium (Nb) and Titanium (Ti). The development and application of microalloyed steels and steels in general are limited to the handling of powders with particles of submicron or nanometer dimensions. Therefore, this work presents an alternative in order to construction of microalloyed steels utilizing the deposition by magnetron sputtering technique as a microalloying element addiction in which Ti nanoparticles are dispersed in an iron matrix. The advantage of that technique in relation to the conventional metallurgical processes is the possibility of uniformly disperse the microalloying elements in the iron matrix. It was carried out deposition of Ti onto Fe powder in high CH4, H2, Ar plasma atmosphere, with two deposition times. After the deposition, the iron powder with nanoparticles of Ti dispersed distributed, were compacted and sintered at 1120 ° C in resistive furnace. Characterization techniques utilized in the samples of powder before and after deposition of Ti were Granulometry, Scanning Electron Microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and X-ray diffraction (DRX). In the case of sintered samples, it was carried out characterization by SEM and Vickers Microhardness assays. The results show which the deposition technique by magnetron sputtering is practicable in the dispersion of particles in iron matrix. The EDX microanalysis detected higher percentages of Ti when the deposition were carried out with the inert gas and when the deposition process was carried out with reactive gas. The presence of titanium in iron matrix was also evidenced by the results of X-ray diffraction peaks that showed shifts in the network matrix. Given these results it can be said that the technique of magnetron sputtering deposition is feasible in the dispersion of nanoparticles of iron matrix in Ti.

DEVIDO PROCESSO LEGAL E PROCESSO ADMINISTRATIVO SANCIONADOR NAS AGÊNCIAS REGULADORAS

This paper discusses the growing attention that, over the last decades, has been given to the administrative procedure in Administrative Law, as it also highlights the procedures which are in tune with the new trappings of this legal field. It focuses on the sanctioning competence of regulatory agencies, notably what concerns the procedural guide that conditions its exercise. It aims at gathering varied elements, many times dispersed over the legal system, so it is possible to list, with a satisfactory degree of detail, the procedural constitutional guidelines which are indispensable to the sanctioning of private entities through punitive action by regulatory agencies. It highlights the due legal process clause, for the abundance of the protective set there is around it, as a guiding constitutional principle for the application of sanctions by regulatory agencies. It examines the repercussion of the constitutional principle of the due legal process on Administrative Law, focusing on the most relevant principles on which the first unfolds itself. It analyzes, in light of the due legal process principle, the sanctioning administrative procedure developed in regulatory agencies. In conclusion, it is asserted that there is no room, in the Brazilian legal system as a whole, for sanctions to be applied summarily; that there reigns, in our system, an absolute presumption, dictated by the Constitution, that only through regular procedures can the best and fairest decision, concerning cases in which the rights of private parties could be affected, be taken by the public administration; that, respecting the principle of the right to a fair hearing, it is indispensable that there be motivation of a decision that imposes a sanction; that there should be, in homage to the principle of full defense and for the need to preserve the autonomy of the regulatory party, an appeal court in every agency; that the principles listed in the federal law No. 9.784/1999 should be mandatorily monitored by the agencies, for this is the only alternative consistent with the Constitution

Diffusion of Interstitial Elements in Ti Alloys used as Biomaterials

Titanium alloys are excellent implant materials for orthopedic applications due to their desirable properties, such as good corrosion resistance, low elasticity modulus, and excellent biocompatibility. The presence of interstitial elements (such as oxygen and nitrogen) causes strong changes in the material's mechanical properties, mainly in its elastic properties. Study of the interaction among interstitial elements present in metals began with Snoek's postulate, that a stress-induced ordering of interstitials gives rise to a peak in the mechanical relaxation (internal friction) spectra. In the mechanical relaxation spectra, each species of interstitial solute atom gives rise to a distinct Snoek's peak, whose temperature and position depend on the measurement frequency. This effect is very interesting because its peculiar parameters are directly related to the diffusion coefficient (D) for the interstitial solute. This paper presents a study of diffusion of heavy interstitial elements in Ti-35Nb-7Zr-5Ta alloys using mechanical spectroscopy. Pre-exponential factors and activation energies are calculated for oxygen and nitrogen in theses alloys.